arch/arm/mach-pxa/lpd270.c

   1 /*
   2  * linux/arch/arm/mach-pxa/lpd270.c
   3  *
   4  * Support for the LogicPD PXA270 Card Engine.
   5  * Derived from the mainstone code, which carries these notices:
   6  *
   7  * Author:      Nicolas Pitre
   8  * Created:     Nov 05, 2002
   9  * Copyright:   MontaVista Software Inc.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/sysdev.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/sched.h>
  21 #include <linux/bitops.h>
  22 #include <linux/fb.h>
  23 #include <linux/ioport.h>
  24 #include <linux/mtd/mtd.h>
  25 #include <linux/mtd/partitions.h>
  26 #include <linux/pwm_backlight.h>
  27
  28 #include <asm/types.h>
  29 #include <asm/setup.h>
  30 #include <asm/memory.h>
  31 #include <asm/mach-types.h>
  32 #include <mach/hardware.h>
  33 #include <asm/irq.h>
  34 #include <asm/sizes.h>
  35
  36 #include <asm/mach/arch.h>
  37 #include <asm/mach/map.h>
  38 #include <asm/mach/irq.h>
  39 #include <asm/mach/flash.h>
  40
  41 #include <mach/pxa27x.h>
  42 #include <mach/gpio.h>
  43 #include <mach/lpd270.h>
  44 #include <mach/audio.h>
  45 #include <mach/pxafb.h>
  46 #include <mach/mmc.h>
  47 #include <mach/irda.h>
  48 #include <mach/ohci.h>
  49 #include <mach/smemc.h>
  50
  51 #include "generic.h"
  52 #include "devices.h"
  53
  54 static unsigned long lpd270_pin_config[] __initdata = {
  55         /* Chip Selects */
  56         GPIO15_nCS_1,   /* Mainboard Flash */
  57         GPIO78_nCS_2,   /* CPLD + Ethernet */
  58
  59         /* LCD - 16bpp Active TFT */
  60         GPIO58_LCD_LDD_0,
  61         GPIO59_LCD_LDD_1,
  62         GPIO60_LCD_LDD_2,
  63         GPIO61_LCD_LDD_3,
  64         GPIO62_LCD_LDD_4,
  65         GPIO63_LCD_LDD_5,
  66         GPIO64_LCD_LDD_6,
  67         GPIO65_LCD_LDD_7,
  68         GPIO66_LCD_LDD_8,
  69         GPIO67_LCD_LDD_9,
  70         GPIO68_LCD_LDD_10,
  71         GPIO69_LCD_LDD_11,
  72         GPIO70_LCD_LDD_12,
  73         GPIO71_LCD_LDD_13,
  74         GPIO72_LCD_LDD_14,
  75         GPIO73_LCD_LDD_15,
  76         GPIO74_LCD_FCLK,
  77         GPIO75_LCD_LCLK,
  78         GPIO76_LCD_PCLK,
  79         GPIO77_LCD_BIAS,
  80         GPIO16_PWM0_OUT,        /* Backlight */
  81
  82         /* USB Host */
  83         GPIO88_USBH1_PWR,
  84         GPIO89_USBH1_PEN,
  85
  86         /* AC97 */
  87         GPIO28_AC97_BITCLK,
  88         GPIO29_AC97_SDATA_IN_0,
  89         GPIO30_AC97_SDATA_OUT,
  90         GPIO31_AC97_SYNC,
  91         GPIO45_AC97_SYSCLK,
  92
  93         GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
  94 };
  95
  96 static unsigned int lpd270_irq_enabled;
  97
  98 static void lpd270_mask_irq(struct irq_data *d)
  99 {
 100         int lpd270_irq = d->irq - LPD270_IRQ(0);
 101
 102         __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
 103
 104         lpd270_irq_enabled &= ~(1 << lpd270_irq);
 105         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
 106 }
 107
 108 static void lpd270_unmask_irq(struct irq_data *d)
 109 {
 110         int lpd270_irq = d->irq - LPD270_IRQ(0);
 111
 112         lpd270_irq_enabled |= 1 << lpd270_irq;
 113         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
 114 }
 115
 116 static struct irq_chip lpd270_irq_chip = {
 117         .name           = "CPLD",
 118         .irq_ack        = lpd270_mask_irq,
 119         .irq_mask       = lpd270_mask_irq,
 120         .irq_unmask     = lpd270_unmask_irq,
 121 };
 122
 123 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 124 {
 125         unsigned long pending;
 126
 127         pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
 128         do {
 129                 /* clear useless edge notification */
 130                 desc->irq_data.chip->irq_ack(&desc->irq_data);
 131                 if (likely(pending)) {
 132                         irq = LPD270_IRQ(0) + __ffs(pending);
 133                         generic_handle_irq(irq);
 134
 135                         pending = __raw_readw(LPD270_INT_STATUS) &
 136                                                 lpd270_irq_enabled;
 137                 }
 138         } while (pending);
 139 }
 140
 141 static void __init lpd270_init_irq(void)
 142 {
 143         int irq;
 144
 145         pxa27x_init_irq();
 146
 147         __raw_writew(0, LPD270_INT_MASK);
 148         __raw_writew(0, LPD270_INT_STATUS);
 149
 150         /* setup extra LogicPD PXA270 irqs */
 151         for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
 152                 irq_set_chip_and_handler(irq, &lpd270_irq_chip,
 153                                          handle_level_irq);
 154                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 155         }
 156         irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
 157         irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 158 }
 159
 160
 161 #ifdef CONFIG_PM
 162 static int lpd270_irq_resume(struct sys_device *dev)
 163 {
 164         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
 165         return 0;
 166 }
 167
 168 static struct sysdev_class lpd270_irq_sysclass = {
 169         .name = "cpld_irq",
 170         .resume = lpd270_irq_resume,
 171 };
 172
 173 static struct sys_device lpd270_irq_device = {
 174         .cls = &lpd270_irq_sysclass,
 175 };
 176
 177 static int __init lpd270_irq_device_init(void)
 178 {
 179         int ret = -ENODEV;
 180         if (machine_is_logicpd_pxa270()) {
 181                 ret = sysdev_class_register(&lpd270_irq_sysclass);
 182                 if (ret == 0)
 183                         ret = sysdev_register(&lpd270_irq_device);
 184         }
 185         return ret;
 186 }
 187
 188 device_initcall(lpd270_irq_device_init);
 189 #endif
 190
 191
 192 static struct resource smc91x_resources[] = {
 193         [0] = {
 194                 .start  = LPD270_ETH_PHYS,
 195                 .end    = (LPD270_ETH_PHYS + 0xfffff),
 196                 .flags  = IORESOURCE_MEM,
 197         },
 198         [1] = {
 199                 .start  = LPD270_ETHERNET_IRQ,
 200                 .end    = LPD270_ETHERNET_IRQ,
 201                 .flags  = IORESOURCE_IRQ,
 202         },
 203 };
 204
 205 static struct platform_device smc91x_device = {
 206         .name           = "smc91x",
 207         .id             = 0,
 208         .num_resources  = ARRAY_SIZE(smc91x_resources),
 209         .resource       = smc91x_resources,
 210 };
 211
 212 static struct resource lpd270_flash_resources[] = {
 213         [0] = {
 214                 .start  = PXA_CS0_PHYS,
 215                 .end    = PXA_CS0_PHYS + SZ_64M - 1,
 216                 .flags  = IORESOURCE_MEM,
 217         },
 218         [1] = {
 219                 .start  = PXA_CS1_PHYS,
 220                 .end    = PXA_CS1_PHYS + SZ_64M - 1,
 221                 .flags  = IORESOURCE_MEM,
 222         },
 223 };
 224
 225 static struct mtd_partition lpd270_flash0_partitions[] = {
 226         {
 227                 .name =         "Bootloader",
 228                 .size =         0x00040000,
 229                 .offset =       0,
 230                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
 231         }, {
 232                 .name =         "Kernel",
 233                 .size =         0x00400000,
 234                 .offset =       0x00040000,
 235         }, {
 236                 .name =         "Filesystem",
 237                 .size =         MTDPART_SIZ_FULL,
 238                 .offset =       0x00440000
 239         },
 240 };
 241
 242 static struct flash_platform_data lpd270_flash_data[2] = {
 243         {
 244                 .name           = "processor-flash",
 245                 .map_name       = "cfi_probe",
 246                 .parts          = lpd270_flash0_partitions,
 247                 .nr_parts       = ARRAY_SIZE(lpd270_flash0_partitions),
 248         }, {
 249                 .name           = "mainboard-flash",
 250                 .map_name       = "cfi_probe",
 251                 .parts          = NULL,
 252                 .nr_parts       = 0,
 253         }
 254 };
 255
 256 static struct platform_device lpd270_flash_device[2] = {
 257         {
 258                 .name           = "pxa2xx-flash",
 259                 .id             = 0,
 260                 .dev = {
 261                         .platform_data  = &lpd270_flash_data[0],
 262                 },
 263                 .resource       = &lpd270_flash_resources[0],
 264                 .num_resources  = 1,
 265         }, {
 266                 .name           = "pxa2xx-flash",
 267                 .id             = 1,
 268                 .dev = {
 269                         .platform_data  = &lpd270_flash_data[1],
 270                 },
 271                 .resource       = &lpd270_flash_resources[1],
 272                 .num_resources  = 1,
 273         },
 274 };
 275
 276 static struct platform_pwm_backlight_data lpd270_backlight_data = {
 277         .pwm_id         = 0,
 278         .max_brightness = 1,
 279         .dft_brightness = 1,
 280         .pwm_period_ns  = 78770,
 281 };
 282
 283 static struct platform_device lpd270_backlight_device = {
 284         .name           = "pwm-backlight",
 285         .dev            = {
 286                 .parent = &pxa27x_device_pwm0.dev,
 287                 .platform_data = &lpd270_backlight_data,
 288         },
 289 };
 290
 291 /* 5.7" TFT QVGA (LoLo display number 1) */
 292 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
 293         .pixclock               = 150000,
 294         .xres                   = 320,
 295         .yres                   = 240,
 296         .bpp                    = 16,
 297         .hsync_len              = 0x14,
 298         .left_margin            = 0x28,
 299         .right_margin           = 0x0a,
 300         .vsync_len              = 0x02,
 301         .upper_margin           = 0x08,
 302         .lower_margin           = 0x14,
 303         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 304 };
 305
 306 static struct pxafb_mach_info sharp_lq057q3dc02 = {
 307         .modes                  = &sharp_lq057q3dc02_mode,
 308         .num_modes              = 1,
 309         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
 310                                   LCD_ALTERNATE_MAPPING,
 311 };
 312
 313 /* 12.1" TFT SVGA (LoLo display number 2) */
 314 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
 315         .pixclock               = 50000,
 316         .xres                   = 800,
 317         .yres                   = 600,
 318         .bpp                    = 16,
 319         .hsync_len              = 0x05,
 320         .left_margin            = 0x52,
 321         .right_margin           = 0x05,
 322         .vsync_len              = 0x04,
 323         .upper_margin           = 0x14,
 324         .lower_margin           = 0x0a,
 325         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 326 };
 327
 328 static struct pxafb_mach_info sharp_lq121s1dg31 = {
 329         .modes                  = &sharp_lq121s1dg31_mode,
 330         .num_modes              = 1,
 331         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
 332                                   LCD_ALTERNATE_MAPPING,
 333 };
 334
 335 /* 3.6" TFT QVGA (LoLo display number 3) */
 336 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
 337         .pixclock               = 150000,
 338         .xres                   = 320,
 339         .yres                   = 240,
 340         .bpp                    = 16,
 341         .hsync_len              = 0x0e,
 342         .left_margin            = 0x04,
 343         .right_margin           = 0x0a,
 344         .vsync_len              = 0x03,
 345         .upper_margin           = 0x03,
 346         .lower_margin           = 0x03,
 347         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 348 };
 349
 350 static struct pxafb_mach_info sharp_lq036q1da01 = {
 351         .modes                  = &sharp_lq036q1da01_mode,
 352         .num_modes              = 1,
 353         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
 354                                   LCD_ALTERNATE_MAPPING,
 355 };
 356
 357 /* 6.4" TFT VGA (LoLo display number 5) */
 358 static struct pxafb_mode_info sharp_lq64d343_mode = {
 359         .pixclock               = 25000,
 360         .xres                   = 640,
 361         .yres                   = 480,
 362         .bpp                    = 16,
 363         .hsync_len              = 0x31,
 364         .left_margin            = 0x89,
 365         .right_margin           = 0x19,
 366         .vsync_len              = 0x12,
 367         .upper_margin           = 0x22,
 368         .lower_margin           = 0x00,
 369         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 370 };
 371
 372 static struct pxafb_mach_info sharp_lq64d343 = {
 373         .modes                  = &sharp_lq64d343_mode,
 374         .num_modes              = 1,
 375         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
 376                                   LCD_ALTERNATE_MAPPING,
 377 };
 378
 379 /* 10.4" TFT VGA (LoLo display number 7) */
 380 static struct pxafb_mode_info sharp_lq10d368_mode = {
 381         .pixclock               = 25000,
 382         .xres                   = 640,
 383         .yres                   = 480,
 384         .bpp                    = 16,
 385         .hsync_len              = 0x31,
 386         .left_margin            = 0x89,
 387         .right_margin           = 0x19,
 388         .vsync_len              = 0x12,
 389         .upper_margin           = 0x22,
 390         .lower_margin           = 0x00,
 391         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 392 };
 393
 394 static struct pxafb_mach_info sharp_lq10d368 = {
 395         .modes                  = &sharp_lq10d368_mode,
 396         .num_modes              = 1,
 397         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
 398                                   LCD_ALTERNATE_MAPPING,
 399 };
 400
 401 /* 3.5" TFT QVGA (LoLo display number 8) */
 402 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
 403         .pixclock               = 150000,
 404         .xres                   = 240,
 405         .yres                   = 320,
 406         .bpp                    = 16,
 407         .hsync_len              = 0x0e,
 408         .left_margin            = 0x0a,
 409         .right_margin           = 0x0a,
 410         .vsync_len              = 0x03,
 411         .upper_margin           = 0x05,
 412         .lower_margin           = 0x14,
 413         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 414 };
 415
 416 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 417         .modes                  = &sharp_lq035q7db02_20_mode,
 418         .num_modes              = 1,
 419         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
 420                                   LCD_ALTERNATE_MAPPING,
 421 };
 422
 423 static struct pxafb_mach_info *lpd270_lcd_to_use;
 424
 425 static int __init lpd270_set_lcd(char *str)
 426 {
 427         if (!strnicmp(str, "lq057q3dc02", 11)) {
 428                 lpd270_lcd_to_use = &sharp_lq057q3dc02;
 429         } else if (!strnicmp(str, "lq121s1dg31", 11)) {
 430                 lpd270_lcd_to_use = &sharp_lq121s1dg31;
 431         } else if (!strnicmp(str, "lq036q1da01", 11)) {
 432                 lpd270_lcd_to_use = &sharp_lq036q1da01;
 433         } else if (!strnicmp(str, "lq64d343", 8)) {
 434                 lpd270_lcd_to_use = &sharp_lq64d343;
 435         } else if (!strnicmp(str, "lq10d368", 8)) {
 436                 lpd270_lcd_to_use = &sharp_lq10d368;
 437         } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
 438                 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
 439         } else {
 440                 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
 441         }
 442
 443         return 1;
 444 }
 445
 446 __setup("lcd=", lpd270_set_lcd);
 447
 448 static struct platform_device *platform_devices[] __initdata = {
 449         &smc91x_device,
 450         &lpd270_backlight_device,
 451         &lpd270_flash_device[0],
 452         &lpd270_flash_device[1],
 453 };
 454
 455 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
 456         .port_mode      = PMM_PERPORT_MODE,
 457         .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 458 };
 459
 460 static void __init lpd270_init(void)
 461 {
 462         pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
 463
 464         pxa_set_ffuart_info(NULL);
 465         pxa_set_btuart_info(NULL);
 466         pxa_set_stuart_info(NULL);
 467
 468         lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 469         lpd270_flash_data[1].width = 4;
 470
 471         /*
 472          * System bus arbiter setting:
 473          * - Core_Park
 474          * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
 475          */
 476         ARB_CNTRL = ARB_CORE_PARK | 0x234;
 477
 478         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 479
 480         pxa_set_ac97_info(NULL);
 481
 482         if (lpd270_lcd_to_use != NULL)
 483                 pxa_set_fb_info(NULL, lpd270_lcd_to_use);
 484
 485         pxa_set_ohci_info(&lpd270_ohci_platform_data);
 486 }
 487
 488
 489 static struct map_desc lpd270_io_desc[] __initdata = {
 490         {
 491                 .virtual        = LPD270_CPLD_VIRT,
 492                 .pfn            = __phys_to_pfn(LPD270_CPLD_PHYS),
 493                 .length         = LPD270_CPLD_SIZE,
 494                 .type           = MT_DEVICE,
 495         },
 496 };
 497
 498 static void __init lpd270_map_io(void)
 499 {
 500         pxa27x_map_io();
 501         iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 502
 503         /* for use I SRAM as framebuffer.  */
 504         PSLR |= 0x00000F04;
 505         PCFR  = 0x00000066;
 506 }
 507
 508 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 509         /* Maintainer: Peter Barada */
 510         .boot_params    = 0xa0000100,
 511         .map_io         = lpd270_map_io,
 512         .nr_irqs        = LPD270_NR_IRQS,
 513         .init_irq       = lpd270_init_irq,
 514         .timer          = &pxa_timer,
 515         .init_machine   = lpd270_init,
 516 MACHINE_END