arch/arm/mach-pxa/cm-x2xx.c

   1 /*
   2  * linux/arch/arm/mach-pxa/cm-x2xx.c
   3  *
   4  * Copyright (C) 2008 CompuLab, Ltd.
   5  * Mike Rapoport <mike@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/platform_device.h>
  13 #include <linux/sysdev.h>
  14 #include <linux/irq.h>
  15 #include <linux/gpio.h>
  16
  17 #include <linux/dm9000.h>
  18 #include <linux/leds.h>
  19
  20 #include <asm/mach/arch.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/map.h>
  23
  24 #include <mach/pxa2xx-regs.h>
  25 #include <mach/audio.h>
  26 #include <mach/pxafb.h>
  27
  28 #include <asm/hardware/it8152.h>
  29
  30 #include "generic.h"
  31 #include "cm-x2xx-pci.h"
  32
  33 extern void cmx255_init(void);
  34 extern void cmx270_init(void);
  35
  36 /* reserve IRQs for IT8152 */
  37 #define CMX2XX_NR_IRQS          (IRQ_BOARD_START + 40)
  38
  39 /* virtual addresses for statically mapped regions */
  40 #define CMX2XX_VIRT_BASE        (0xe8000000)
  41 #define CMX2XX_IT8152_VIRT      (CMX2XX_VIRT_BASE)
  42
  43 /* physical address if local-bus attached devices */
  44 #define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
  45 #define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
  46
  47 /* leds */
  48 #define CMX255_GPIO_RED         (27)
  49 #define CMX255_GPIO_GREEN       (32)
  50 #define CMX270_GPIO_RED         (93)
  51 #define CMX270_GPIO_GREEN       (94)
  52
  53 /* GPIO IRQ usage */
  54 #define GPIO22_ETHIRQ           (22)
  55 #define GPIO10_ETHIRQ           (10)
  56 #define CMX255_GPIO_IT8152_IRQ  (0)
  57 #define CMX270_GPIO_IT8152_IRQ  (22)
  58
  59 #define CMX255_ETHIRQ           IRQ_GPIO(GPIO22_ETHIRQ)
  60 #define CMX270_ETHIRQ           IRQ_GPIO(GPIO10_ETHIRQ)
  61
  62 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
  63 static struct resource cmx255_dm9000_resource[] = {
  64         [0] = {
  65                 .start = CMX255_DM9000_PHYS_BASE,
  66                 .end   = CMX255_DM9000_PHYS_BASE + 3,
  67                 .flags = IORESOURCE_MEM,
  68         },
  69         [1] = {
  70                 .start = CMX255_DM9000_PHYS_BASE + 4,
  71                 .end   = CMX255_DM9000_PHYS_BASE + 4 + 500,
  72                 .flags = IORESOURCE_MEM,
  73         },
  74         [2] = {
  75                 .start = CMX255_ETHIRQ,
  76                 .end   = CMX255_ETHIRQ,
  77                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  78         }
  79 };
  80
  81 static struct resource cmx270_dm9000_resource[] = {
  82         [0] = {
  83                 .start = CMX270_DM9000_PHYS_BASE,
  84                 .end   = CMX270_DM9000_PHYS_BASE + 3,
  85                 .flags = IORESOURCE_MEM,
  86         },
  87         [1] = {
  88                 .start = CMX270_DM9000_PHYS_BASE + 8,
  89                 .end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
  90                 .flags = IORESOURCE_MEM,
  91         },
  92         [2] = {
  93                 .start = CMX270_ETHIRQ,
  94                 .end   = CMX270_ETHIRQ,
  95                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  96         }
  97 };
  98
  99 static struct dm9000_plat_data cmx270_dm9000_platdata = {
 100         .flags          = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
 101 };
 102
 103 static struct platform_device cmx2xx_dm9000_device = {
 104         .name           = "dm9000",
 105         .id             = 0,
 106         .num_resources  = ARRAY_SIZE(cmx270_dm9000_resource),
 107         .dev            = {
 108                 .platform_data = &cmx270_dm9000_platdata,
 109         }
 110 };
 111
 112 static void __init cmx2xx_init_dm9000(void)
 113 {
 114         if (cpu_is_pxa25x())
 115                 cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
 116         else
 117                 cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
 118         platform_device_register(&cmx2xx_dm9000_device);
 119 }
 120 #else
 121 static inline void cmx2xx_init_dm9000(void) {}
 122 #endif
 123
 124 /* UCB1400 touchscreen controller */
 125 #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 126 static struct platform_device cmx2xx_ts_device = {
 127         .name           = "ucb1400_core",
 128         .id             = -1,
 129 };
 130
 131 static void __init cmx2xx_init_touchscreen(void)
 132 {
 133         platform_device_register(&cmx2xx_ts_device);
 134 }
 135 #else
 136 static inline void cmx2xx_init_touchscreen(void) {}
 137 #endif
 138
 139 /* CM-X270 LEDs */
 140 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 141 static struct gpio_led cmx2xx_leds[] = {
 142         [0] = {
 143                 .name = "cm-x2xx:red",
 144                 .default_trigger = "nand-disk",
 145                 .active_low = 1,
 146         },
 147         [1] = {
 148                 .name = "cm-x2xx:green",
 149                 .default_trigger = "heartbeat",
 150                 .active_low = 1,
 151         },
 152 };
 153
 154 static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
 155         .num_leds = ARRAY_SIZE(cmx2xx_leds),
 156         .leds = cmx2xx_leds,
 157 };
 158
 159 static struct platform_device cmx2xx_led_device = {
 160         .name           = "leds-gpio",
 161         .id             = -1,
 162         .dev            = {
 163                 .platform_data = &cmx2xx_gpio_led_pdata,
 164         },
 165 };
 166
 167 static void __init cmx2xx_init_leds(void)
 168 {
 169         if (cpu_is_pxa25x()) {
 170                 cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
 171                 cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
 172         } else {
 173                 cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
 174                 cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
 175         }
 176         platform_device_register(&cmx2xx_led_device);
 177 }
 178 #else
 179 static inline void cmx2xx_init_leds(void) {}
 180 #endif
 181
 182 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 183 /*
 184   Display definitions
 185   keep these for backwards compatibility, although symbolic names (as
 186   e.g. in lpd270.c) looks better
 187 */
 188 #define MTYPE_STN320x240        0
 189 #define MTYPE_TFT640x480        1
 190 #define MTYPE_CRT640x480        2
 191 #define MTYPE_CRT800x600        3
 192 #define MTYPE_TFT320x240        6
 193 #define MTYPE_STN640x480        7
 194
 195 static struct pxafb_mode_info generic_stn_320x240_mode = {
 196         .pixclock       = 76923,
 197         .bpp            = 8,
 198         .xres           = 320,
 199         .yres           = 240,
 200         .hsync_len      = 3,
 201         .vsync_len      = 2,
 202         .left_margin    = 3,
 203         .upper_margin   = 0,
 204         .right_margin   = 3,
 205         .lower_margin   = 0,
 206         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 207                            FB_SYNC_VERT_HIGH_ACT),
 208         .cmap_greyscale = 0,
 209 };
 210
 211 static struct pxafb_mach_info generic_stn_320x240 = {
 212         .modes          = &generic_stn_320x240_mode,
 213         .num_modes      = 1,
 214         .lcd_conn       = LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\
 215                           LCD_AC_BIAS_FREQ(0xff),
 216         .cmap_inverse   = 0,
 217         .cmap_static    = 0,
 218 };
 219
 220 static struct pxafb_mode_info generic_tft_640x480_mode = {
 221         .pixclock       = 38461,
 222         .bpp            = 8,
 223         .xres           = 640,
 224         .yres           = 480,
 225         .hsync_len      = 60,
 226         .vsync_len      = 2,
 227         .left_margin    = 70,
 228         .upper_margin   = 10,
 229         .right_margin   = 70,
 230         .lower_margin   = 5,
 231         .sync           = 0,
 232         .cmap_greyscale = 0,
 233 };
 234
 235 static struct pxafb_mach_info generic_tft_640x480 = {
 236         .modes          = &generic_tft_640x480_mode,
 237         .num_modes      = 1,
 238         .lcd_conn       = LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\
 239                           LCD_AC_BIAS_FREQ(0xff),
 240         .cmap_inverse   = 0,
 241         .cmap_static    = 0,
 242 };
 243
 244 static struct pxafb_mode_info generic_crt_640x480_mode = {
 245         .pixclock       = 38461,
 246         .bpp            = 8,
 247         .xres           = 640,
 248         .yres           = 480,
 249         .hsync_len      = 63,
 250         .vsync_len      = 2,
 251         .left_margin    = 81,
 252         .upper_margin   = 33,
 253         .right_margin   = 16,
 254         .lower_margin   = 10,
 255         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 256                            FB_SYNC_VERT_HIGH_ACT),
 257         .cmap_greyscale = 0,
 258 };
 259
 260 static struct pxafb_mach_info generic_crt_640x480 = {
 261         .modes          = &generic_crt_640x480_mode,
 262         .num_modes      = 1,
 263         .lcd_conn       = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
 264         .cmap_inverse   = 0,
 265         .cmap_static    = 0,
 266 };
 267
 268 static struct pxafb_mode_info generic_crt_800x600_mode = {
 269         .pixclock       = 28846,
 270         .bpp            = 8,
 271         .xres           = 800,
 272         .yres           = 600,
 273         .hsync_len      = 63,
 274         .vsync_len      = 2,
 275         .left_margin    = 26,
 276         .upper_margin   = 21,
 277         .right_margin   = 26,
 278         .lower_margin   = 11,
 279         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 280                            FB_SYNC_VERT_HIGH_ACT),
 281         .cmap_greyscale = 0,
 282 };
 283
 284 static struct pxafb_mach_info generic_crt_800x600 = {
 285         .modes          = &generic_crt_800x600_mode,
 286         .num_modes      = 1,
 287         .lcd_conn       = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
 288         .cmap_inverse   = 0,
 289         .cmap_static    = 0,
 290 };
 291
 292 static struct pxafb_mode_info generic_tft_320x240_mode = {
 293         .pixclock       = 134615,
 294         .bpp            = 16,
 295         .xres           = 320,
 296         .yres           = 240,
 297         .hsync_len      = 63,
 298         .vsync_len      = 7,
 299         .left_margin    = 75,
 300         .upper_margin   = 0,
 301         .right_margin   = 15,
 302         .lower_margin   = 15,
 303         .sync           = 0,
 304         .cmap_greyscale = 0,
 305 };
 306
 307 static struct pxafb_mach_info generic_tft_320x240 = {
 308         .modes          = &generic_tft_320x240_mode,
 309         .num_modes      = 1,
 310         .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff),
 311         .cmap_inverse   = 0,
 312         .cmap_static    = 0,
 313 };
 314
 315 static struct pxafb_mode_info generic_stn_640x480_mode = {
 316         .pixclock       = 57692,
 317         .bpp            = 8,
 318         .xres           = 640,
 319         .yres           = 480,
 320         .hsync_len      = 4,
 321         .vsync_len      = 2,
 322         .left_margin    = 10,
 323         .upper_margin   = 5,
 324         .right_margin   = 10,
 325         .lower_margin   = 5,
 326         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 327                            FB_SYNC_VERT_HIGH_ACT),
 328         .cmap_greyscale = 0,
 329 };
 330
 331 static struct pxafb_mach_info generic_stn_640x480 = {
 332         .modes          = &generic_stn_640x480_mode,
 333         .num_modes      = 1,
 334         .lcd_conn       = LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff),
 335         .cmap_inverse   = 0,
 336         .cmap_static    = 0,
 337 };
 338
 339 static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
 340
 341 static int __init cmx2xx_set_display(char *str)
 342 {
 343         int disp_type = simple_strtol(str, NULL, 0);
 344         switch (disp_type) {
 345         case MTYPE_STN320x240:
 346                 cmx2xx_display = &generic_stn_320x240;
 347                 break;
 348         case MTYPE_TFT640x480:
 349                 cmx2xx_display = &generic_tft_640x480;
 350                 break;
 351         case MTYPE_CRT640x480:
 352                 cmx2xx_display = &generic_crt_640x480;
 353                 break;
 354         case MTYPE_CRT800x600:
 355                 cmx2xx_display = &generic_crt_800x600;
 356                 break;
 357         case MTYPE_TFT320x240:
 358                 cmx2xx_display = &generic_tft_320x240;
 359                 break;
 360         case MTYPE_STN640x480:
 361                 cmx2xx_display = &generic_stn_640x480;
 362                 break;
 363         default: /* fallback to CRT 640x480 */
 364                 cmx2xx_display = &generic_crt_640x480;
 365                 break;
 366         }
 367         return 1;
 368 }
 369
 370 /*
 371    This should be done really early to get proper configuration for
 372    frame buffer.
 373    Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
 374    has limitied line length for kernel command line, and also it will
 375    break compatibitlty with proprietary releases already in field.
 376 */
 377 __setup("monitor=", cmx2xx_set_display);
 378
 379 static void __init cmx2xx_init_display(void)
 380 {
 381         set_pxa_fb_info(cmx2xx_display);
 382 }
 383 #else
 384 static inline void cmx2xx_init_display(void) {}
 385 #endif
 386
 387 #ifdef CONFIG_PM
 388 static unsigned long sleep_save_msc[10];
 389
 390 static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 391 {
 392         cmx2xx_pci_suspend();
 393
 394         /* save MSC registers */
 395         sleep_save_msc[0] = MSC0;
 396         sleep_save_msc[1] = MSC1;
 397         sleep_save_msc[2] = MSC2;
 398
 399         /* setup power saving mode registers */
 400         PCFR = 0x0;
 401         PSLR = 0xff400000;
 402         PMCR  = 0x00000005;
 403         PWER  = 0x80000000;
 404         PFER  = 0x00000000;
 405         PRER  = 0x00000000;
 406         PGSR0 = 0xC0018800;
 407         PGSR1 = 0x004F0002;
 408         PGSR2 = 0x6021C000;
 409         PGSR3 = 0x00020000;
 410
 411         return 0;
 412 }
 413
 414 static int cmx2xx_resume(struct sys_device *dev)
 415 {
 416         cmx2xx_pci_resume();
 417
 418         /* restore MSC registers */
 419         MSC0 = sleep_save_msc[0];
 420         MSC1 = sleep_save_msc[1];
 421         MSC2 = sleep_save_msc[2];
 422
 423         return 0;
 424 }
 425
 426 static struct sysdev_class cmx2xx_pm_sysclass = {
 427         .name = "pm",
 428         .resume = cmx2xx_resume,
 429         .suspend = cmx2xx_suspend,
 430 };
 431
 432 static struct sys_device cmx2xx_pm_device = {
 433         .cls = &cmx2xx_pm_sysclass,
 434 };
 435
 436 static int __init cmx2xx_pm_init(void)
 437 {
 438         int error;
 439         error = sysdev_class_register(&cmx2xx_pm_sysclass);
 440         if (error == 0)
 441                 error = sysdev_register(&cmx2xx_pm_device);
 442         return error;
 443 }
 444 #else
 445 static int __init cmx2xx_pm_init(void) { return 0; }
 446 #endif
 447
 448 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
 449 static void __init cmx2xx_init_ac97(void)
 450 {
 451         pxa_set_ac97_info(NULL);
 452 }
 453 #else
 454 static inline void cmx2xx_init_ac97(void) {}
 455 #endif
 456
 457 static void __init cmx2xx_init(void)
 458 {
 459         pxa_set_ffuart_info(NULL);
 460         pxa_set_btuart_info(NULL);
 461         pxa_set_stuart_info(NULL);
 462
 463         cmx2xx_pm_init();
 464
 465         if (cpu_is_pxa25x())
 466                 cmx255_init();
 467         else
 468                 cmx270_init();
 469
 470         cmx2xx_init_dm9000();
 471         cmx2xx_init_display();
 472         cmx2xx_init_ac97();
 473         cmx2xx_init_touchscreen();
 474         cmx2xx_init_leds();
 475 }
 476
 477 static void __init cmx2xx_init_irq(void)
 478 {
 479         pxa27x_init_irq();
 480
 481         if (cpu_is_pxa25x()) {
 482                 pxa25x_init_irq();
 483                 cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
 484         } else {
 485                 pxa27x_init_irq();
 486                 cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
 487         }
 488 }
 489
 490 #ifdef CONFIG_PCI
 491 /* Map PCI companion statically */
 492 static struct map_desc cmx2xx_io_desc[] __initdata = {
 493         [0] = { /* PCI bridge */
 494                 .virtual        = CMX2XX_IT8152_VIRT,
 495                 .pfn            = __phys_to_pfn(PXA_CS4_PHYS),
 496                 .length         = SZ_64M,
 497                 .type           = MT_DEVICE
 498         },
 499 };
 500
 501 static void __init cmx2xx_map_io(void)
 502 {
 503         pxa_map_io();
 504         iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
 505
 506         it8152_base_address = CMX2XX_IT8152_VIRT;
 507 }
 508 #else
 509 static void __init cmx2xx_map_io(void)
 510 {
 511         pxa_map_io();
 512 }
 513 #endif
 514
 515 MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 516         .boot_params    = 0xa0000100,
 517         .map_io         = cmx2xx_map_io,
 518         .nr_irqs        = CMX2XX_NR_IRQS,
 519         .init_irq       = cmx2xx_init_irq,
 520         .timer          = &pxa_timer,
 521         .init_machine   = cmx2xx_init,
 522 MACHINE_END