arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c

   1 /*
   2  * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
   3  *
   4  * Marvell Orion-1-90 AP GE Reference Design Setup
   5  *
   6  * This file is licensed under the terms of the GNU General Public
   7  * License version 2.  This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/pci.h>
  15 #include <linux/irq.h>
  16 #include <linux/mtd/physmap.h>
  17 #include <linux/mv643xx_eth.h>
  18 #include <linux/spi/spi.h>
  19 #include <linux/spi/orion_spi.h>
  20 #include <linux/spi/flash.h>
  21 #include <linux/ethtool.h>
  22 #include <net/dsa.h>
  23 #include <asm/mach-types.h>
  24 #include <asm/gpio.h>
  25 #include <asm/leds.h>
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/pci.h>
  28 #include <mach/orion5x.h>
  29 #include "common.h"
  30
  31 static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
  32         .phy_addr       = -1,
  33         .speed          = SPEED_1000,
  34         .duplex         = DUPLEX_FULL,
  35 };
  36
  37 static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
  38         .port_names[0]  = "lan1",
  39         .port_names[1]  = "lan2",
  40         .port_names[2]  = "lan3",
  41         .port_names[3]  = "lan4",
  42         .port_names[4]  = "wan",
  43         .port_names[5]  = "cpu",
  44 };
  45
  46 static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
  47         .nr_chips       = 1,
  48         .chip           = &rd88f6183ap_ge_switch_chip_data,
  49 };
  50
  51 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
  52         {
  53                 .name   = "kernel",
  54                 .offset = 0x00000000,
  55                 .size   = 0x00200000,
  56         }, {
  57                 .name   = "rootfs",
  58                 .offset = 0x00200000,
  59                 .size   = 0x00500000,
  60         }, {
  61                 .name   = "nvram",
  62                 .offset = 0x00700000,
  63                 .size   = 0x00080000,
  64         },
  65 };
  66
  67 static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
  68         .type           = "m25p64",
  69         .nr_parts       = ARRAY_SIZE(rd88f6183ap_ge_partitions),
  70         .parts          = rd88f6183ap_ge_partitions,
  71 };
  72
  73 static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
  74         {
  75                 .modalias       = "m25p80",
  76                 .platform_data  = &rd88f6183ap_ge_spi_slave_data,
  77                 .irq            = NO_IRQ,
  78                 .max_speed_hz   = 20000000,
  79                 .bus_num        = 0,
  80                 .chip_select    = 0,
  81         },
  82 };
  83
  84 static void __init rd88f6183ap_ge_init(void)
  85 {
  86         /*
  87          * Setup basic Orion functions. Need to be called early.
  88          */
  89         orion5x_init();
  90
  91         /*
  92          * Configure peripherals.
  93          */
  94         orion5x_ehci0_init();
  95         orion5x_eth_init(&rd88f6183ap_ge_eth_data);
  96         orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
  97                                 gpio_to_irq(3));
  98         spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
  99                                 ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 100         orion5x_spi_init();
 101         orion5x_uart0_init();
 102 }
 103
 104 static struct hw_pci rd88f6183ap_ge_pci __initdata = {
 105         .nr_controllers = 2,
 106         .swizzle        = pci_std_swizzle,
 107         .setup          = orion5x_pci_sys_setup,
 108         .scan           = orion5x_pci_sys_scan_bus,
 109         .map_irq        = orion5x_pci_map_irq,
 110 };
 111
 112 static int __init rd88f6183ap_ge_pci_init(void)
 113 {
 114         if (machine_is_rd88f6183ap_ge()) {
 115                 orion5x_pci_disable();
 116                 pci_common_init(&rd88f6183ap_ge_pci);
 117         }
 118
 119         return 0;
 120 }
 121 subsys_initcall(rd88f6183ap_ge_pci_init);
 122
 123 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 124         /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 125         .boot_params    = 0x00000100,
 126         .init_machine   = rd88f6183ap_ge_init,
 127         .map_io         = orion5x_map_io,
 128         .init_early     = orion5x_init_early,
 129         .init_irq       = orion5x_init_irq,
 130         .timer          = &orion5x_timer,
 131         .fixup          = tag_fixup_mem32,
 132 MACHINE_END