arch/arm/mach-omap2/voltage.c

   1 /*
   2  * OMAP3/OMAP4 Voltage Management Routines
   3  *
   4  * Author: Thara Gopinath       <thara@ti.com>
   5  *
   6  * Copyright (C) 2007 Texas Instruments, Inc.
   7  * Rajendra Nayak <rnayak@ti.com>
   8  * Lesly A M <x0080970@ti.com>
   9  *
  10  * Copyright (C) 2008 Nokia Corporation
  11  * Kalle Jokiniemi
  12  *
  13  * Copyright (C) 2010 Texas Instruments, Inc.
  14  * Thara Gopinath <thara@ti.com>
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License version 2 as
  18  * published by the Free Software Foundation.
  19  */
  20
  21 #include <linux/delay.h>
  22 #include <linux/io.h>
  23 #include <linux/clk.h>
  24 #include <linux/err.h>
  25 #include <linux/debugfs.h>
  26 #include <linux/slab.h>
  27
  28 #include <plat/common.h>
  29 #include <plat/voltage.h>
  30
  31 #include "prm-regbits-34xx.h"
  32 #include "prm-regbits-44xx.h"
  33 #include "prm44xx.h"
  34 #include "prcm44xx.h"
  35 #include "prminst44xx.h"
  36 #include "control.h"
  37
  38 #define VP_IDLE_TIMEOUT         200
  39 #define VP_TRANXDONE_TIMEOUT    300
  40 #define VOLTAGE_DIR_SIZE        16
  41
  42 /* Voltage processor register offsets */
  43 struct vp_reg_offs {
  44         u8 vpconfig;
  45         u8 vstepmin;
  46         u8 vstepmax;
  47         u8 vlimitto;
  48         u8 vstatus;
  49         u8 voltage;
  50 };
  51
  52 /* Voltage Processor bit field values, shifts and masks */
  53 struct vp_reg_val {
  54         /* PRM module */
  55         u16 prm_mod;
  56         /* VPx_VPCONFIG */
  57         u32 vpconfig_erroroffset;
  58         u16 vpconfig_errorgain;
  59         u32 vpconfig_errorgain_mask;
  60         u8 vpconfig_errorgain_shift;
  61         u32 vpconfig_initvoltage_mask;
  62         u8 vpconfig_initvoltage_shift;
  63         u32 vpconfig_timeouten;
  64         u32 vpconfig_initvdd;
  65         u32 vpconfig_forceupdate;
  66         u32 vpconfig_vpenable;
  67         /* VPx_VSTEPMIN */
  68         u8 vstepmin_stepmin;
  69         u16 vstepmin_smpswaittimemin;
  70         u8 vstepmin_stepmin_shift;
  71         u8 vstepmin_smpswaittimemin_shift;
  72         /* VPx_VSTEPMAX */
  73         u8 vstepmax_stepmax;
  74         u16 vstepmax_smpswaittimemax;
  75         u8 vstepmax_stepmax_shift;
  76         u8 vstepmax_smpswaittimemax_shift;
  77         /* VPx_VLIMITTO */
  78         u8 vlimitto_vddmin;
  79         u8 vlimitto_vddmax;
  80         u16 vlimitto_timeout;
  81         u8 vlimitto_vddmin_shift;
  82         u8 vlimitto_vddmax_shift;
  83         u8 vlimitto_timeout_shift;
  84         /* PRM_IRQSTATUS*/
  85         u32 tranxdone_status;
  86 };
  87
  88 /* Voltage controller registers and offsets */
  89 struct vc_reg_info {
  90         /* PRM module */
  91         u16 prm_mod;
  92         /* VC register offsets */
  93         u8 smps_sa_reg;
  94         u8 smps_volra_reg;
  95         u8 bypass_val_reg;
  96         u8 cmdval_reg;
  97         u8 voltsetup_reg;
  98         /*VC_SMPS_SA*/
  99         u8 smps_sa_shift;
 100         u32 smps_sa_mask;
 101         /* VC_SMPS_VOL_RA */
 102         u8 smps_volra_shift;
 103         u32 smps_volra_mask;
 104         /* VC_BYPASS_VAL */
 105         u8 data_shift;
 106         u8 slaveaddr_shift;
 107         u8 regaddr_shift;
 108         u32 valid;
 109         /* VC_CMD_VAL */
 110         u8 cmd_on_shift;
 111         u8 cmd_onlp_shift;
 112         u8 cmd_ret_shift;
 113         u8 cmd_off_shift;
 114         u32 cmd_on_mask;
 115         /* PRM_VOLTSETUP */
 116         u8 voltsetup_shift;
 117         u32 voltsetup_mask;
 118 };
 119
 120 /**
 121  * omap_vdd_info - Per Voltage Domain info
 122  *
 123  * @volt_data           : voltage table having the distinct voltages supported
 124  *                        by the domain and other associated per voltage data.
 125  * @pmic_info           : pmic specific parameters which should be populted by
 126  *                        the pmic drivers.
 127  * @vp_offs             : structure containing the offsets for various
 128  *                        vp registers
 129  * @vp_reg              : the register values, shifts, masks for various
 130  *                        vp registers
 131  * @vc_reg              : structure containing various various vc registers,
 132  *                        shifts, masks etc.
 133  * @voltdm              : pointer to the voltage domain structure
 134  * @debug_dir           : debug directory for this voltage domain.
 135  * @curr_volt           : current voltage for this vdd.
 136  * @ocp_mod             : The prm module for accessing the prm irqstatus reg.
 137  * @prm_irqst_reg       : prm irqstatus register.
 138  * @vp_enabled          : flag to keep track of whether vp is enabled or not
 139  * @volt_scale          : API to scale the voltage of the vdd.
 140  */
 141 struct omap_vdd_info {
 142         struct omap_volt_data *volt_data;
 143         struct omap_volt_pmic_info *pmic_info;
 144         struct vp_reg_offs vp_offs;
 145         struct vp_reg_val vp_reg;
 146         struct vc_reg_info vc_reg;
 147         struct voltagedomain voltdm;
 148         struct dentry *debug_dir;
 149         u32 curr_volt;
 150         u16 ocp_mod;
 151         u8 prm_irqst_reg;
 152         bool vp_enabled;
 153         u32 (*read_reg) (u16 mod, u8 offset);
 154         void (*write_reg) (u32 val, u16 mod, u8 offset);
 155         int (*volt_scale) (struct omap_vdd_info *vdd,
 156                 unsigned long target_volt);
 157 };
 158
 159 static struct omap_vdd_info *vdd_info;
 160 /*
 161  * Number of scalable voltage domains.
 162  */
 163 static int nr_scalable_vdd;
 164
 165 /* OMAP3 VDD sturctures */
 166 static struct omap_vdd_info omap3_vdd_info[] = {
 167         {
 168                 .vp_offs = {
 169                         .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
 170                         .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
 171                         .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
 172                         .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
 173                         .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
 174                         .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
 175                 },
 176                 .voltdm = {
 177                         .name = "mpu",
 178                 },
 179         },
 180         {
 181                 .vp_offs = {
 182                         .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
 183                         .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
 184                         .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
 185                         .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
 186                         .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
 187                         .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
 188                 },
 189                 .voltdm = {
 190                         .name = "core",
 191                 },
 192         },
 193 };
 194
 195 #define OMAP3_NR_SCALABLE_VDD ARRAY_SIZE(omap3_vdd_info)
 196
 197 /* OMAP4 VDD sturctures */
 198 static struct omap_vdd_info omap4_vdd_info[] = {
 199         {
 200                 .vp_offs = {
 201                         .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
 202                         .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
 203                         .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
 204                         .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
 205                         .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
 206                         .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
 207                 },
 208                 .voltdm = {
 209                         .name = "mpu",
 210                 },
 211         },
 212         {
 213                 .vp_offs = {
 214                         .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
 215                         .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
 216                         .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
 217                         .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
 218                         .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
 219                         .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
 220                 },
 221                 .voltdm = {
 222                         .name = "iva",
 223                 },
 224         },
 225         {
 226                 .vp_offs = {
 227                         .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
 228                         .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
 229                         .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
 230                         .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
 231                         .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
 232                         .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
 233                 },
 234                 .voltdm = {
 235                         .name = "core",
 236                 },
 237         },
 238 };
 239
 240 #define OMAP4_NR_SCALABLE_VDD ARRAY_SIZE(omap4_vdd_info)
 241
 242 /*
 243  * Structures containing OMAP3430/OMAP3630 voltage supported and various
 244  * voltage dependent data for each VDD.
 245  */
 246 #define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain)   \
 247 {                                                                       \
 248         .volt_nominal   = _v_nom,                                       \
 249         .sr_efuse_offs  = _efuse_offs,                                  \
 250         .sr_errminlimit = _errminlimit,                                 \
 251         .vp_errgain     = _errgain                                      \
 252 }
 253
 254 /* VDD1 */
 255 static struct omap_volt_data omap34xx_vddmpu_volt_data[] = {
 256         VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c),
 257         VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c),
 258         VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18),
 259         VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18),
 260         VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18),
 261         VOLT_DATA_DEFINE(0, 0, 0, 0),
 262 };
 263
 264 static struct omap_volt_data omap36xx_vddmpu_volt_data[] = {
 265         VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c),
 266         VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16),
 267         VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23),
 268         VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27),
 269         VOLT_DATA_DEFINE(0, 0, 0, 0),
 270 };
 271
 272 /* VDD2 */
 273 static struct omap_volt_data omap34xx_vddcore_volt_data[] = {
 274         VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c),
 275         VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c),
 276         VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18),
 277         VOLT_DATA_DEFINE(0, 0, 0, 0),
 278 };
 279
 280 static struct omap_volt_data omap36xx_vddcore_volt_data[] = {
 281         VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c),
 282         VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16),
 283         VOLT_DATA_DEFINE(0, 0, 0, 0),
 284 };
 285
 286 /*
 287  * Structures containing OMAP4430 voltage supported and various
 288  * voltage dependent data for each VDD.
 289  */
 290 static struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
 291         VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
 292         VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
 293         VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
 294         VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
 295         VOLT_DATA_DEFINE(0, 0, 0, 0),
 296 };
 297
 298 static struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
 299         VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
 300         VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
 301         VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
 302         VOLT_DATA_DEFINE(0, 0, 0, 0),
 303 };
 304
 305 static struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
 306         VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
 307         VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
 308         VOLT_DATA_DEFINE(0, 0, 0, 0),
 309 };
 310
 311 static struct dentry *voltage_dir;
 312
 313 /* Init function pointers */
 314 static void (*vc_init) (struct omap_vdd_info *vdd);
 315 static int (*vdd_data_configure) (struct omap_vdd_info *vdd);
 316
 317 static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
 318 {
 319         return omap2_prm_read_mod_reg(mod, offset);
 320 }
 321
 322 static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
 323 {
 324         omap2_prm_write_mod_reg(val, mod, offset);
 325 }
 326
 327 static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
 328 {
 329         return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
 330                                         mod, offset);
 331 }
 332
 333 static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
 334 {
 335         omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
 336 }
 337
 338 /* Voltage debugfs support */
 339 static int vp_volt_debug_get(void *data, u64 *val)
 340 {
 341         struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
 342         u8 vsel;
 343
 344         if (!vdd) {
 345                 pr_warning("Wrong paramater passed\n");
 346                 return -EINVAL;
 347         }
 348
 349         vsel = vdd->read_reg(vdd->vp_reg.prm_mod, vdd->vp_offs.voltage);
 350         pr_notice("curr_vsel = %x\n", vsel);
 351
 352         if (!vdd->pmic_info->vsel_to_uv) {
 353                 pr_warning("PMIC function to convert vsel to voltage"
 354                         "in uV not registerd\n");
 355                 return -EINVAL;
 356         }
 357
 358         *val = vdd->pmic_info->vsel_to_uv(vsel);
 359         return 0;
 360 }
 361
 362 static int nom_volt_debug_get(void *data, u64 *val)
 363 {
 364         struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
 365
 366         if (!vdd) {
 367                 pr_warning("Wrong paramater passed\n");
 368                 return -EINVAL;
 369         }
 370
 371         *val = omap_voltage_get_nom_volt(&vdd->voltdm);
 372
 373         return 0;
 374 }
 375
 376 DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
 377 DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
 378                                                                 "%llu\n");
 379 static void vp_latch_vsel(struct omap_vdd_info *vdd)
 380 {
 381         u32 vpconfig;
 382         u16 mod;
 383         unsigned long uvdc;
 384         char vsel;
 385
 386         uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
 387         if (!uvdc) {
 388                 pr_warning("%s: unable to find current voltage for vdd_%s\n",
 389                         __func__, vdd->voltdm.name);
 390                 return;
 391         }
 392
 393         if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
 394                 pr_warning("%s: PMIC function to convert voltage in uV to"
 395                         " vsel not registered\n", __func__);
 396                 return;
 397         }
 398
 399         mod = vdd->vp_reg.prm_mod;
 400
 401         vsel = vdd->pmic_info->uv_to_vsel(uvdc);
 402
 403         vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
 404         vpconfig &= ~(vdd->vp_reg.vpconfig_initvoltage_mask |
 405                         vdd->vp_reg.vpconfig_initvdd);
 406         vpconfig |= vsel << vdd->vp_reg.vpconfig_initvoltage_shift;
 407
 408         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 409
 410         /* Trigger initVDD value copy to voltage processor */
 411         vdd->write_reg((vpconfig | vdd->vp_reg.vpconfig_initvdd), mod,
 412                         vdd->vp_offs.vpconfig);
 413
 414         /* Clear initVDD copy trigger bit */
 415         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 416 }
 417
 418 /* Generic voltage init functions */
 419 static void __init vp_init(struct omap_vdd_info *vdd)
 420 {
 421         u32 vp_val;
 422         u16 mod;
 423
 424         if (!vdd->read_reg || !vdd->write_reg) {
 425                 pr_err("%s: No read/write API for accessing vdd_%s regs\n",
 426                         __func__, vdd->voltdm.name);
 427                 return;
 428         }
 429
 430         mod = vdd->vp_reg.prm_mod;
 431
 432         vp_val = vdd->vp_reg.vpconfig_erroroffset |
 433                 (vdd->vp_reg.vpconfig_errorgain <<
 434                 vdd->vp_reg.vpconfig_errorgain_shift) |
 435                 vdd->vp_reg.vpconfig_timeouten;
 436         vdd->write_reg(vp_val, mod, vdd->vp_offs.vpconfig);
 437
 438         vp_val = ((vdd->vp_reg.vstepmin_smpswaittimemin <<
 439                 vdd->vp_reg.vstepmin_smpswaittimemin_shift) |
 440                 (vdd->vp_reg.vstepmin_stepmin <<
 441                 vdd->vp_reg.vstepmin_stepmin_shift));
 442         vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmin);
 443
 444         vp_val = ((vdd->vp_reg.vstepmax_smpswaittimemax <<
 445                 vdd->vp_reg.vstepmax_smpswaittimemax_shift) |
 446                 (vdd->vp_reg.vstepmax_stepmax <<
 447                 vdd->vp_reg.vstepmax_stepmax_shift));
 448         vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmax);
 449
 450         vp_val = ((vdd->vp_reg.vlimitto_vddmax <<
 451                 vdd->vp_reg.vlimitto_vddmax_shift) |
 452                 (vdd->vp_reg.vlimitto_vddmin <<
 453                 vdd->vp_reg.vlimitto_vddmin_shift) |
 454                 (vdd->vp_reg.vlimitto_timeout <<
 455                 vdd->vp_reg.vlimitto_timeout_shift));
 456         vdd->write_reg(vp_val, mod, vdd->vp_offs.vlimitto);
 457 }
 458
 459 static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
 460 {
 461         char *name;
 462
 463         name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
 464         if (!name) {
 465                 pr_warning("%s: Unable to allocate memory for debugfs"
 466                         " directory name for vdd_%s",
 467                         __func__, vdd->voltdm.name);
 468                 return;
 469         }
 470         strcpy(name, "vdd_");
 471         strcat(name, vdd->voltdm.name);
 472
 473         vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
 474         kfree(name);
 475         if (IS_ERR(vdd->debug_dir)) {
 476                 pr_warning("%s: Unable to create debugfs directory for"
 477                         " vdd_%s\n", __func__, vdd->voltdm.name);
 478                 vdd->debug_dir = NULL;
 479                 return;
 480         }
 481
 482         (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
 483                                 &(vdd->vp_reg.vpconfig_errorgain));
 484         (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
 485                                 vdd->debug_dir,
 486                                 &(vdd->vp_reg.vstepmin_smpswaittimemin));
 487         (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
 488                                 &(vdd->vp_reg.vstepmin_stepmin));
 489         (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
 490                                 vdd->debug_dir,
 491                                 &(vdd->vp_reg.vstepmax_smpswaittimemax));
 492         (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
 493                                 &(vdd->vp_reg.vstepmax_stepmax));
 494         (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
 495                                 &(vdd->vp_reg.vlimitto_vddmax));
 496         (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
 497                                 &(vdd->vp_reg.vlimitto_vddmin));
 498         (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
 499                                 &(vdd->vp_reg.vlimitto_timeout));
 500         (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
 501                                 (void *) vdd, &vp_volt_debug_fops);
 502         (void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
 503                                 vdd->debug_dir, (void *) vdd,
 504                                 &nom_volt_debug_fops);
 505 }
 506
 507 /* Voltage scale and accessory APIs */
 508 static int _pre_volt_scale(struct omap_vdd_info *vdd,
 509                 unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
 510 {
 511         struct omap_volt_data *volt_data;
 512         u32 vc_cmdval, vp_errgain_val;
 513         u16 vp_mod, vc_mod;
 514
 515         /* Check if suffiecient pmic info is available for this vdd */
 516         if (!vdd->pmic_info) {
 517                 pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
 518                         __func__, vdd->voltdm.name);
 519                 return -EINVAL;
 520         }
 521
 522         if (!vdd->pmic_info->uv_to_vsel) {
 523                 pr_err("%s: PMIC function to convert voltage in uV to"
 524                         "vsel not registered. Hence unable to scale voltage"
 525                         "for vdd_%s\n", __func__, vdd->voltdm.name);
 526                 return -ENODATA;
 527         }
 528
 529         if (!vdd->read_reg || !vdd->write_reg) {
 530                 pr_err("%s: No read/write API for accessing vdd_%s regs\n",
 531                         __func__, vdd->voltdm.name);
 532                 return -EINVAL;
 533         }
 534
 535         vp_mod = vdd->vp_reg.prm_mod;
 536         vc_mod = vdd->vc_reg.prm_mod;
 537
 538         /* Get volt_data corresponding to target_volt */
 539         volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
 540         if (IS_ERR(volt_data))
 541                 volt_data = NULL;
 542
 543         *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
 544         *current_vsel = vdd->read_reg(vp_mod, vdd->vp_offs.voltage);
 545
 546         /* Setting the ON voltage to the new target voltage */
 547         vc_cmdval = vdd->read_reg(vc_mod, vdd->vc_reg.cmdval_reg);
 548         vc_cmdval &= ~vdd->vc_reg.cmd_on_mask;
 549         vc_cmdval |= (*target_vsel << vdd->vc_reg.cmd_on_shift);
 550         vdd->write_reg(vc_cmdval, vc_mod, vdd->vc_reg.cmdval_reg);
 551
 552         /* Setting vp errorgain based on the voltage */
 553         if (volt_data) {
 554                 vp_errgain_val = vdd->read_reg(vp_mod,
 555                                 vdd->vp_offs.vpconfig);
 556                 vdd->vp_reg.vpconfig_errorgain = volt_data->vp_errgain;
 557                 vp_errgain_val &= ~vdd->vp_reg.vpconfig_errorgain_mask;
 558                 vp_errgain_val |= vdd->vp_reg.vpconfig_errorgain <<
 559                                 vdd->vp_reg.vpconfig_errorgain_shift;
 560                 vdd->write_reg(vp_errgain_val, vp_mod,
 561                                 vdd->vp_offs.vpconfig);
 562         }
 563
 564         return 0;
 565 }
 566
 567 static void _post_volt_scale(struct omap_vdd_info *vdd,
 568                 unsigned long target_volt, u8 target_vsel, u8 current_vsel)
 569 {
 570         u32 smps_steps = 0, smps_delay = 0;
 571
 572         smps_steps = abs(target_vsel - current_vsel);
 573         /* SMPS slew rate / step size. 2us added as buffer. */
 574         smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
 575                         vdd->pmic_info->slew_rate) + 2;
 576         udelay(smps_delay);
 577
 578         vdd->curr_volt = target_volt;
 579 }
 580
 581 /* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
 582 static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
 583                 unsigned long target_volt)
 584 {
 585         u32 loop_cnt = 0, retries_cnt = 0;
 586         u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
 587         u16 mod;
 588         u8 target_vsel, current_vsel;
 589         int ret;
 590
 591         ret = _pre_volt_scale(vdd, target_volt, &target_vsel, &current_vsel);
 592         if (ret)
 593                 return ret;
 594
 595         mod = vdd->vc_reg.prm_mod;
 596
 597         vc_valid = vdd->vc_reg.valid;
 598         vc_bypass_val_reg = vdd->vc_reg.bypass_val_reg;
 599         vc_bypass_value = (target_vsel << vdd->vc_reg.data_shift) |
 600                         (vdd->pmic_info->pmic_reg <<
 601                         vdd->vc_reg.regaddr_shift) |
 602                         (vdd->pmic_info->i2c_slave_addr <<
 603                         vdd->vc_reg.slaveaddr_shift);
 604
 605         vdd->write_reg(vc_bypass_value, mod, vc_bypass_val_reg);
 606         vdd->write_reg(vc_bypass_value | vc_valid, mod, vc_bypass_val_reg);
 607
 608         vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg);
 609         /*
 610          * Loop till the bypass command is acknowledged from the SMPS.
 611          * NOTE: This is legacy code. The loop count and retry count needs
 612          * to be revisited.
 613          */
 614         while (!(vc_bypass_value & vc_valid)) {
 615                 loop_cnt++;
 616
 617                 if (retries_cnt > 10) {
 618                         pr_warning("%s: Retry count exceeded\n", __func__);
 619                         return -ETIMEDOUT;
 620                 }
 621
 622                 if (loop_cnt > 50) {
 623                         retries_cnt++;
 624                         loop_cnt = 0;
 625                         udelay(10);
 626                 }
 627                 vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg);
 628         }
 629
 630         _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
 631         return 0;
 632 }
 633
 634 /* VP force update method of voltage scaling */
 635 static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
 636                 unsigned long target_volt)
 637 {
 638         u32 vpconfig;
 639         u16 mod, ocp_mod;
 640         u8 target_vsel, current_vsel, prm_irqst_reg;
 641         int ret, timeout = 0;
 642
 643         ret = _pre_volt_scale(vdd, target_volt, &target_vsel, &current_vsel);
 644         if (ret)
 645                 return ret;
 646
 647         mod = vdd->vp_reg.prm_mod;
 648         ocp_mod = vdd->ocp_mod;
 649         prm_irqst_reg = vdd->prm_irqst_reg;
 650
 651         /*
 652          * Clear all pending TransactionDone interrupt/status. Typical latency
 653          * is <3us
 654          */
 655         while (timeout++ < VP_TRANXDONE_TIMEOUT) {
 656                 vdd->write_reg(vdd->vp_reg.tranxdone_status,
 657                                 ocp_mod, prm_irqst_reg);
 658                 if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) &
 659                                 vdd->vp_reg.tranxdone_status))
 660                                 break;
 661                 udelay(1);
 662         }
 663         if (timeout >= VP_TRANXDONE_TIMEOUT) {
 664                 pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
 665                         "Voltage change aborted", __func__, vdd->voltdm.name);
 666                 return -ETIMEDOUT;
 667         }
 668
 669         /* Configure for VP-Force Update */
 670         vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
 671         vpconfig &= ~(vdd->vp_reg.vpconfig_initvdd |
 672                         vdd->vp_reg.vpconfig_forceupdate |
 673                         vdd->vp_reg.vpconfig_initvoltage_mask);
 674         vpconfig |= ((target_vsel <<
 675                         vdd->vp_reg.vpconfig_initvoltage_shift));
 676         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 677
 678         /* Trigger initVDD value copy to voltage processor */
 679         vpconfig |= vdd->vp_reg.vpconfig_initvdd;
 680         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 681
 682         /* Force update of voltage */
 683         vpconfig |= vdd->vp_reg.vpconfig_forceupdate;
 684         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 685
 686         /*
 687          * Wait for TransactionDone. Typical latency is <200us.
 688          * Depends on SMPSWAITTIMEMIN/MAX and voltage change
 689          */
 690         timeout = 0;
 691         omap_test_timeout((vdd->read_reg(ocp_mod, prm_irqst_reg) &
 692                         vdd->vp_reg.tranxdone_status),
 693                         VP_TRANXDONE_TIMEOUT, timeout);
 694         if (timeout >= VP_TRANXDONE_TIMEOUT)
 695                 pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
 696                         "TRANXDONE never got set after the voltage update\n",
 697                         __func__, vdd->voltdm.name);
 698
 699         _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
 700
 701         /*
 702          * Disable TransactionDone interrupt , clear all status, clear
 703          * control registers
 704          */
 705         timeout = 0;
 706         while (timeout++ < VP_TRANXDONE_TIMEOUT) {
 707                 vdd->write_reg(vdd->vp_reg.tranxdone_status,
 708                                 ocp_mod, prm_irqst_reg);
 709                 if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) &
 710                                 vdd->vp_reg.tranxdone_status))
 711                                 break;
 712                 udelay(1);
 713         }
 714
 715         if (timeout >= VP_TRANXDONE_TIMEOUT)
 716                 pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
 717                         "to clear the TRANXDONE status\n",
 718                         __func__, vdd->voltdm.name);
 719
 720         vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
 721         /* Clear initVDD copy trigger bit */
 722         vpconfig &= ~vdd->vp_reg.vpconfig_initvdd;;
 723         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 724         /* Clear force bit */
 725         vpconfig &= ~vdd->vp_reg.vpconfig_forceupdate;
 726         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
 727
 728         return 0;
 729 }
 730
 731 /* OMAP3 specific voltage init functions */
 732
 733 /*
 734  * Intializes the voltage controller registers with the PMIC and board
 735  * specific parameters and voltage setup times for OMAP3.
 736  */
 737 static void __init omap3_vc_init(struct omap_vdd_info *vdd)
 738 {
 739         u32 vc_val;
 740         u16 mod;
 741         u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
 742         static bool is_initialized;
 743
 744         if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
 745                 pr_err("%s: PMIC info requried to configure vc for"
 746                         "vdd_%s not populated.Hence cannot initialize vc\n",
 747                         __func__, vdd->voltdm.name);
 748                 return;
 749         }
 750
 751         if (!vdd->read_reg || !vdd->write_reg) {
 752                 pr_err("%s: No read/write API for accessing vdd_%s regs\n",
 753                         __func__, vdd->voltdm.name);
 754                 return;
 755         }
 756
 757         mod = vdd->vc_reg.prm_mod;
 758
 759         /* Set up the SMPS_SA(i2c slave address in VC */
 760         vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg);
 761         vc_val &= ~vdd->vc_reg.smps_sa_mask;
 762         vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift;
 763         vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg);
 764
 765         /* Setup the VOLRA(pmic reg addr) in VC */
 766         vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg);
 767         vc_val &= ~vdd->vc_reg.smps_volra_mask;
 768         vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift;
 769         vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg);
 770
 771         /*Configure the setup times */
 772         vc_val = vdd->read_reg(mod, vdd->vc_reg.voltsetup_reg);
 773         vc_val &= ~vdd->vc_reg.voltsetup_mask;
 774         vc_val |= vdd->pmic_info->volt_setup_time <<
 775                         vdd->vc_reg.voltsetup_shift;
 776         vdd->write_reg(vc_val, mod, vdd->vc_reg.voltsetup_reg);
 777
 778         /* Set up the on, inactive, retention and off voltage */
 779         on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
 780         onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
 781         ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
 782         off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
 783         vc_val  = ((on_vsel << vdd->vc_reg.cmd_on_shift) |
 784                 (onlp_vsel << vdd->vc_reg.cmd_onlp_shift) |
 785                 (ret_vsel << vdd->vc_reg.cmd_ret_shift) |
 786                 (off_vsel << vdd->vc_reg.cmd_off_shift));
 787         vdd->write_reg(vc_val, mod, vdd->vc_reg.cmdval_reg);
 788
 789         if (is_initialized)
 790                 return;
 791
 792         /* Generic VC parameters init */
 793         vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, mod,
 794                         OMAP3_PRM_VC_CH_CONF_OFFSET);
 795         vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, mod,
 796                         OMAP3_PRM_VC_I2C_CFG_OFFSET);
 797         vdd->write_reg(OMAP3_CLKSETUP, mod, OMAP3_PRM_CLKSETUP_OFFSET);
 798         vdd->write_reg(OMAP3_VOLTOFFSET, mod, OMAP3_PRM_VOLTOFFSET_OFFSET);
 799         vdd->write_reg(OMAP3_VOLTSETUP2, mod, OMAP3_PRM_VOLTSETUP2_OFFSET);
 800         is_initialized = true;
 801 }
 802
 803 /* Sets up all the VDD related info for OMAP3 */
 804 static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd)
 805 {
 806         struct clk *sys_ck;
 807         u32 sys_clk_speed, timeout_val, waittime;
 808
 809         if (!vdd->pmic_info) {
 810                 pr_err("%s: PMIC info requried to configure vdd_%s not"
 811                         "populated.Hence cannot initialize vdd_%s\n",
 812                         __func__, vdd->voltdm.name, vdd->voltdm.name);
 813                 return -EINVAL;
 814         }
 815
 816         if (!strcmp(vdd->voltdm.name, "mpu")) {
 817                 if (cpu_is_omap3630())
 818                         vdd->volt_data = omap36xx_vddmpu_volt_data;
 819                 else
 820                         vdd->volt_data = omap34xx_vddmpu_volt_data;
 821
 822                 vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK;
 823                 vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET;
 824                 vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT;
 825                 vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK;
 826                 vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA0_SHIFT;
 827                 vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA0_MASK;
 828                 vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT;
 829                 vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK;
 830         } else if (!strcmp(vdd->voltdm.name, "core")) {
 831                 if (cpu_is_omap3630())
 832                         vdd->volt_data = omap36xx_vddcore_volt_data;
 833                 else
 834                         vdd->volt_data = omap34xx_vddcore_volt_data;
 835
 836                 vdd->vp_reg.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK;
 837                 vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET;
 838                 vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT;
 839                 vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK;
 840                 vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA1_SHIFT;
 841                 vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA1_MASK;
 842                 vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT;
 843                 vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK;
 844         } else {
 845                 pr_warning("%s: vdd_%s does not exisit in OMAP3\n",
 846                         __func__, vdd->voltdm.name);
 847                 return -EINVAL;
 848         }
 849
 850         /*
 851          * Sys clk rate is require to calculate vp timeout value and
 852          * smpswaittimemin and smpswaittimemax.
 853          */
 854         sys_ck = clk_get(NULL, "sys_ck");
 855         if (IS_ERR(sys_ck)) {
 856                 pr_warning("%s: Could not get the sys clk to calculate"
 857                         "various vdd_%s params\n", __func__, vdd->voltdm.name);
 858                 return -EINVAL;
 859         }
 860         sys_clk_speed = clk_get_rate(sys_ck);
 861         clk_put(sys_ck);
 862         /* Divide to avoid overflow */
 863         sys_clk_speed /= 1000;
 864
 865         /* Generic voltage parameters */
 866         vdd->curr_volt = 1200000;
 867         vdd->ocp_mod = OCP_MOD;
 868         vdd->prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET;
 869         vdd->read_reg = omap3_voltage_read_reg;
 870         vdd->write_reg = omap3_voltage_write_reg;
 871         vdd->volt_scale = vp_forceupdate_scale_voltage;
 872         vdd->vp_enabled = false;
 873
 874         /* VC parameters */
 875         vdd->vc_reg.prm_mod = OMAP3430_GR_MOD;
 876         vdd->vc_reg.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET;
 877         vdd->vc_reg.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET;
 878         vdd->vc_reg.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET;
 879         vdd->vc_reg.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET;
 880         vdd->vc_reg.data_shift = OMAP3430_DATA_SHIFT;
 881         vdd->vc_reg.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT;
 882         vdd->vc_reg.regaddr_shift = OMAP3430_REGADDR_SHIFT;
 883         vdd->vc_reg.valid = OMAP3430_VALID_MASK;
 884         vdd->vc_reg.cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT;
 885         vdd->vc_reg.cmd_on_mask = OMAP3430_VC_CMD_ON_MASK;
 886         vdd->vc_reg.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT;
 887         vdd->vc_reg.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT;
 888         vdd->vc_reg.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT;
 889
 890         vdd->vp_reg.prm_mod = OMAP3430_GR_MOD;
 891
 892         /* VPCONFIG bit fields */
 893         vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset <<
 894                                  OMAP3430_ERROROFFSET_SHIFT);
 895         vdd->vp_reg.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK;
 896         vdd->vp_reg.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT;
 897         vdd->vp_reg.vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT;
 898         vdd->vp_reg.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK;
 899         vdd->vp_reg.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK;
 900         vdd->vp_reg.vpconfig_initvdd = OMAP3430_INITVDD_MASK;
 901         vdd->vp_reg.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK;
 902         vdd->vp_reg.vpconfig_vpenable = OMAP3430_VPENABLE_MASK;
 903
 904         /* VSTEPMIN VSTEPMAX bit fields */
 905         waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
 906                                 sys_clk_speed) / 1000;
 907         vdd->vp_reg.vstepmin_smpswaittimemin = waittime;
 908         vdd->vp_reg.vstepmax_smpswaittimemax = waittime;
 909         vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
 910         vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
 911         vdd->vp_reg.vstepmin_smpswaittimemin_shift =
 912                                 OMAP3430_SMPSWAITTIMEMIN_SHIFT;
 913         vdd->vp_reg.vstepmax_smpswaittimemax_shift =
 914                                 OMAP3430_SMPSWAITTIMEMAX_SHIFT;
 915         vdd->vp_reg.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT;
 916         vdd->vp_reg.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT;
 917
 918         /* VLIMITTO bit fields */
 919         timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
 920         vdd->vp_reg.vlimitto_timeout = timeout_val;
 921         vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
 922         vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
 923         vdd->vp_reg.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT;
 924         vdd->vp_reg.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT;
 925         vdd->vp_reg.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT;
 926
 927         return 0;
 928 }
 929
 930 /* OMAP4 specific voltage init functions */
 931 static void __init omap4_vc_init(struct omap_vdd_info *vdd)
 932 {
 933         u32 vc_val;
 934         u16 mod;
 935         static bool is_initialized;
 936
 937         if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
 938                 pr_err("%s: PMIC info requried to configure vc for"
 939                         "vdd_%s not populated.Hence cannot initialize vc\n",
 940                         __func__, vdd->voltdm.name);
 941                 return;
 942         }
 943
 944         if (!vdd->read_reg || !vdd->write_reg) {
 945                 pr_err("%s: No read/write API for accessing vdd_%s regs\n",
 946                         __func__, vdd->voltdm.name);
 947                 return;
 948         }
 949
 950         mod = vdd->vc_reg.prm_mod;
 951
 952         /* Set up the SMPS_SA(i2c slave address in VC */
 953         vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg);
 954         vc_val &= ~vdd->vc_reg.smps_sa_mask;
 955         vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift;
 956         vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg);
 957
 958         /* Setup the VOLRA(pmic reg addr) in VC */
 959         vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg);
 960         vc_val &= ~vdd->vc_reg.smps_volra_mask;
 961         vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift;
 962         vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg);
 963
 964         /* TODO: Configure setup times and CMD_VAL values*/
 965
 966         if (is_initialized)
 967                 return;
 968
 969         /* Generic VC parameters init */
 970         vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
 971                 OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
 972                 OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
 973         vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
 974
 975         vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
 976         vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
 977
 978         is_initialized = true;
 979 }
 980
 981 /* Sets up all the VDD related info for OMAP4 */
 982 static int __init omap4_vdd_data_configure(struct omap_vdd_info *vdd)
 983 {
 984         struct clk *sys_ck;
 985         u32 sys_clk_speed, timeout_val, waittime;
 986
 987         if (!vdd->pmic_info) {
 988                 pr_err("%s: PMIC info requried to configure vdd_%s not"
 989                         "populated.Hence cannot initialize vdd_%s\n",
 990                         __func__, vdd->voltdm.name, vdd->voltdm.name);
 991                 return -EINVAL;
 992         }
 993
 994         if (!strcmp(vdd->voltdm.name, "mpu")) {
 995                 vdd->volt_data = omap44xx_vdd_mpu_volt_data;
 996                 vdd->vp_reg.tranxdone_status =
 997                                 OMAP4430_VP_MPU_TRANXDONE_ST_MASK;
 998                 vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET;
 999                 vdd->vc_reg.smps_sa_shift =
1000                                 OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT;
1001                 vdd->vc_reg.smps_sa_mask =
1002                                 OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK;
1003                 vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT;
1004                 vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK;
1005                 vdd->vc_reg.voltsetup_reg =
1006                                 OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET;
1007                 vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET;
1008         } else if (!strcmp(vdd->voltdm.name, "core")) {
1009                 vdd->volt_data = omap44xx_vdd_core_volt_data;
1010                 vdd->vp_reg.tranxdone_status =
1011                                 OMAP4430_VP_CORE_TRANXDONE_ST_MASK;
1012                 vdd->vc_reg.cmdval_reg =
1013                                 OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET;
1014                 vdd->vc_reg.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT;
1015                 vdd->vc_reg.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK;
1016                 vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT;
1017                 vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK;
1018                 vdd->vc_reg.voltsetup_reg =
1019                                 OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET;
1020                 vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET;
1021         } else if (!strcmp(vdd->voltdm.name, "iva")) {
1022                 vdd->volt_data = omap44xx_vdd_iva_volt_data;
1023                 vdd->vp_reg.tranxdone_status =
1024                                 OMAP4430_VP_IVA_TRANXDONE_ST_MASK;
1025                 vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET;
1026                 vdd->vc_reg.smps_sa_shift =
1027                                 OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT;
1028                 vdd->vc_reg.smps_sa_mask =
1029                                 OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK;
1030                 vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT;
1031                 vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK;
1032                 vdd->vc_reg.voltsetup_reg =
1033                                 OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET;
1034                 vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET;
1035         } else {
1036                 pr_warning("%s: vdd_%s does not exisit in OMAP4\n",
1037                         __func__, vdd->voltdm.name);
1038                 return -EINVAL;
1039         }
1040
1041         /*
1042          * Sys clk rate is require to calculate vp timeout value and
1043          * smpswaittimemin and smpswaittimemax.
1044          */
1045         sys_ck = clk_get(NULL, "sys_clkin_ck");
1046         if (IS_ERR(sys_ck)) {
1047                 pr_warning("%s: Could not get the sys clk to calculate"
1048                         "various vdd_%s params\n", __func__, vdd->voltdm.name);
1049                 return -EINVAL;
1050         }
1051         sys_clk_speed = clk_get_rate(sys_ck);
1052         clk_put(sys_ck);
1053         /* Divide to avoid overflow */
1054         sys_clk_speed /= 1000;
1055
1056         /* Generic voltage parameters */
1057         vdd->curr_volt = 1200000;
1058         vdd->ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
1059         vdd->read_reg = omap4_voltage_read_reg;
1060         vdd->write_reg = omap4_voltage_write_reg;
1061         vdd->volt_scale = vp_forceupdate_scale_voltage;
1062         vdd->vp_enabled = false;
1063
1064         /* VC parameters */
1065         vdd->vc_reg.prm_mod = OMAP4430_PRM_DEVICE_INST;
1066         vdd->vc_reg.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET;
1067         vdd->vc_reg.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET;
1068         vdd->vc_reg.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET;
1069         vdd->vc_reg.data_shift = OMAP4430_DATA_SHIFT;
1070         vdd->vc_reg.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT;
1071         vdd->vc_reg.regaddr_shift = OMAP4430_REGADDR_SHIFT;
1072         vdd->vc_reg.valid = OMAP4430_VALID_MASK;
1073         vdd->vc_reg.cmd_on_shift = OMAP4430_ON_SHIFT;
1074         vdd->vc_reg.cmd_on_mask = OMAP4430_ON_MASK;
1075         vdd->vc_reg.cmd_onlp_shift = OMAP4430_ONLP_SHIFT;
1076         vdd->vc_reg.cmd_ret_shift = OMAP4430_RET_SHIFT;
1077         vdd->vc_reg.cmd_off_shift = OMAP4430_OFF_SHIFT;
1078
1079         vdd->vp_reg.prm_mod = OMAP4430_PRM_DEVICE_INST;
1080
1081         /* VPCONFIG bit fields */
1082         vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset <<
1083                                  OMAP4430_ERROROFFSET_SHIFT);
1084         vdd->vp_reg.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK;
1085         vdd->vp_reg.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT;
1086         vdd->vp_reg.vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT;
1087         vdd->vp_reg.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK;
1088         vdd->vp_reg.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK;
1089         vdd->vp_reg.vpconfig_initvdd = OMAP4430_INITVDD_MASK;
1090         vdd->vp_reg.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK;
1091         vdd->vp_reg.vpconfig_vpenable = OMAP4430_VPENABLE_MASK;
1092
1093         /* VSTEPMIN VSTEPMAX bit fields */
1094         waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
1095                                 sys_clk_speed) / 1000;
1096         vdd->vp_reg.vstepmin_smpswaittimemin = waittime;
1097         vdd->vp_reg.vstepmax_smpswaittimemax = waittime;
1098         vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
1099         vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
1100         vdd->vp_reg.vstepmin_smpswaittimemin_shift =
1101                         OMAP4430_SMPSWAITTIMEMIN_SHIFT;
1102         vdd->vp_reg.vstepmax_smpswaittimemax_shift =
1103                         OMAP4430_SMPSWAITTIMEMAX_SHIFT;
1104         vdd->vp_reg.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT;
1105         vdd->vp_reg.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT;
1106
1107         /* VLIMITTO bit fields */
1108         timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
1109         vdd->vp_reg.vlimitto_timeout = timeout_val;
1110         vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
1111         vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
1112         vdd->vp_reg.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT;
1113         vdd->vp_reg.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT;
1114         vdd->vp_reg.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT;
1115
1116         return 0;
1117 }
1118
1119 /* Public functions */
1120 /**
1121  * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
1122  * @voltdm:     pointer to the VDD for which current voltage info is needed
1123  *
1124  * API to get the current non-auto-compensated voltage for a VDD.
1125  * Returns 0 in case of error else returns the current voltage for the VDD.
1126  */
1127 unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
1128 {
1129         struct omap_vdd_info *vdd;
1130
1131         if (!voltdm || IS_ERR(voltdm)) {
1132                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1133                 return 0;
1134         }
1135
1136         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1137
1138         return vdd->curr_volt;
1139 }
1140
1141 /**
1142  * omap_vp_get_curr_volt() - API to get the current vp voltage.
1143  * @voltdm:     pointer to the VDD.
1144  *
1145  * This API returns the current voltage for the specified voltage processor
1146  */
1147 unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
1148 {
1149         struct omap_vdd_info *vdd;
1150         u8 curr_vsel;
1151
1152         if (!voltdm || IS_ERR(voltdm)) {
1153                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1154                 return 0;
1155         }
1156
1157         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1158         if (!vdd->read_reg) {
1159                 pr_err("%s: No read API for reading vdd_%s regs\n",
1160                         __func__, voltdm->name);
1161                 return 0;
1162         }
1163
1164         curr_vsel = vdd->read_reg(vdd->vp_reg.prm_mod,
1165                         vdd->vp_offs.voltage);
1166
1167         if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
1168                 pr_warning("%s: PMIC function to convert vsel to voltage"
1169                         "in uV not registerd\n", __func__);
1170                 return 0;
1171         }
1172
1173         return vdd->pmic_info->vsel_to_uv(curr_vsel);
1174 }
1175
1176 /**
1177  * omap_vp_enable() - API to enable a particular VP
1178  * @voltdm:     pointer to the VDD whose VP is to be enabled.
1179  *
1180  * This API enables a particular voltage processor. Needed by the smartreflex
1181  * class drivers.
1182  */
1183 void omap_vp_enable(struct voltagedomain *voltdm)
1184 {
1185         struct omap_vdd_info *vdd;
1186         u32 vpconfig;
1187         u16 mod;
1188
1189         if (!voltdm || IS_ERR(voltdm)) {
1190                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1191                 return;
1192         }
1193
1194         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1195         if (!vdd->read_reg || !vdd->write_reg) {
1196                 pr_err("%s: No read/write API for accessing vdd_%s regs\n",
1197                         __func__, voltdm->name);
1198                 return;
1199         }
1200
1201         mod = vdd->vp_reg.prm_mod;
1202
1203         /* If VP is already enabled, do nothing. Return */
1204         if (vdd->vp_enabled)
1205                 return;
1206
1207         vp_latch_vsel(vdd);
1208
1209         /* Enable VP */
1210         vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
1211         vpconfig |= vdd->vp_reg.vpconfig_vpenable;
1212         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
1213         vdd->vp_enabled = true;
1214 }
1215
1216 /**
1217  * omap_vp_disable() - API to disable a particular VP
1218  * @voltdm:     pointer to the VDD whose VP is to be disabled.
1219  *
1220  * This API disables a particular voltage processor. Needed by the smartreflex
1221  * class drivers.
1222  */
1223 void omap_vp_disable(struct voltagedomain *voltdm)
1224 {
1225         struct omap_vdd_info *vdd;
1226         u32 vpconfig;
1227         u16 mod;
1228         int timeout;
1229
1230         if (!voltdm || IS_ERR(voltdm)) {
1231                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1232                 return;
1233         }
1234
1235         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1236         if (!vdd->read_reg || !vdd->write_reg) {
1237                 pr_err("%s: No read/write API for accessing vdd_%s regs\n",
1238                         __func__, voltdm->name);
1239                 return;
1240         }
1241
1242         mod = vdd->vp_reg.prm_mod;
1243
1244         /* If VP is already disabled, do nothing. Return */
1245         if (!vdd->vp_enabled) {
1246                 pr_warning("%s: Trying to disable VP for vdd_%s when"
1247                         "it is already disabled\n", __func__, voltdm->name);
1248                 return;
1249         }
1250
1251         /* Disable VP */
1252         vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
1253         vpconfig &= ~vdd->vp_reg.vpconfig_vpenable;
1254         vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
1255
1256         /*
1257          * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
1258          */
1259         omap_test_timeout((vdd->read_reg(mod, vdd->vp_offs.vstatus)),
1260                                 VP_IDLE_TIMEOUT, timeout);
1261
1262         if (timeout >= VP_IDLE_TIMEOUT)
1263                 pr_warning("%s: vdd_%s idle timedout\n",
1264                         __func__, voltdm->name);
1265
1266         vdd->vp_enabled = false;
1267
1268         return;
1269 }
1270
1271 /**
1272  * omap_voltage_scale_vdd() - API to scale voltage of a particular
1273  *                              voltage domain.
1274  * @voltdm:     pointer to the VDD which is to be scaled.
1275  * @target_volt:        The target voltage of the voltage domain
1276  *
1277  * This API should be called by the kernel to do the voltage scaling
1278  * for a particular voltage domain during dvfs or any other situation.
1279  */
1280 int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
1281                 unsigned long target_volt)
1282 {
1283         struct omap_vdd_info *vdd;
1284
1285         if (!voltdm || IS_ERR(voltdm)) {
1286                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1287                 return -EINVAL;
1288         }
1289
1290         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1291
1292         if (!vdd->volt_scale) {
1293                 pr_err("%s: No voltage scale API registered for vdd_%s\n",
1294                         __func__, voltdm->name);
1295                 return -ENODATA;
1296         }
1297
1298         return vdd->volt_scale(vdd, target_volt);
1299 }
1300
1301 /**
1302  * omap_voltage_reset() - Resets the voltage of a particular voltage domain
1303  *                      to that of the current OPP.
1304  * @voltdm:     pointer to the VDD whose voltage is to be reset.
1305  *
1306  * This API finds out the correct voltage the voltage domain is supposed
1307  * to be at and resets the voltage to that level. Should be used expecially
1308  * while disabling any voltage compensation modules.
1309  */
1310 void omap_voltage_reset(struct voltagedomain *voltdm)
1311 {
1312         unsigned long target_uvdc;
1313
1314         if (!voltdm || IS_ERR(voltdm)) {
1315                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1316                 return;
1317         }
1318
1319         target_uvdc = omap_voltage_get_nom_volt(voltdm);
1320         if (!target_uvdc) {
1321                 pr_err("%s: unable to find current voltage for vdd_%s\n",
1322                         __func__, voltdm->name);
1323                 return;
1324         }
1325
1326         omap_voltage_scale_vdd(voltdm, target_uvdc);
1327 }
1328
1329 /**
1330  * omap_voltage_get_volttable() - API to get the voltage table associated with a
1331  *                              particular voltage domain.
1332  * @voltdm:     pointer to the VDD for which the voltage table is required
1333  * @volt_data:  the voltage table for the particular vdd which is to be
1334  *              populated by this API
1335  *
1336  * This API populates the voltage table associated with a VDD into the
1337  * passed parameter pointer. Returns the count of distinct voltages
1338  * supported by this vdd.
1339  *
1340  */
1341 void omap_voltage_get_volttable(struct voltagedomain *voltdm,
1342                 struct omap_volt_data **volt_data)
1343 {
1344         struct omap_vdd_info *vdd;
1345
1346         if (!voltdm || IS_ERR(voltdm)) {
1347                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1348                 return;
1349         }
1350
1351         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1352
1353         *volt_data = vdd->volt_data;
1354 }
1355
1356 /**
1357  * omap_voltage_get_voltdata() - API to get the voltage table entry for a
1358  *                              particular voltage
1359  * @voltdm:     pointer to the VDD whose voltage table has to be searched
1360  * @volt:       the voltage to be searched in the voltage table
1361  *
1362  * This API searches through the voltage table for the required voltage
1363  * domain and tries to find a matching entry for the passed voltage volt.
1364  * If a matching entry is found volt_data is populated with that entry.
1365  * This API searches only through the non-compensated voltages int the
1366  * voltage table.
1367  * Returns pointer to the voltage table entry corresponding to volt on
1368  * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
1369  * domain or if there is no matching entry.
1370  */
1371 struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
1372                 unsigned long volt)
1373 {
1374         struct omap_vdd_info *vdd;
1375         int i;
1376
1377         if (!voltdm || IS_ERR(voltdm)) {
1378                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1379                 return ERR_PTR(-EINVAL);
1380         }
1381
1382         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1383
1384         if (!vdd->volt_data) {
1385                 pr_warning("%s: voltage table does not exist for vdd_%s\n",
1386                         __func__, voltdm->name);
1387                 return ERR_PTR(-ENODATA);
1388         }
1389
1390         for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
1391                 if (vdd->volt_data[i].volt_nominal == volt)
1392                         return &vdd->volt_data[i];
1393         }
1394
1395         pr_notice("%s: Unable to match the current voltage with the voltage"
1396                 "table for vdd_%s\n", __func__, voltdm->name);
1397
1398         return ERR_PTR(-ENODATA);
1399 }
1400
1401 /**
1402  * omap_voltage_register_pmic() - API to register PMIC specific data
1403  * @voltdm:     pointer to the VDD for which the PMIC specific data is
1404  *              to be registered
1405  * @pmic_info:  the structure containing pmic info
1406  *
1407  * This API is to be called by the SOC/PMIC file to specify the
1408  * pmic specific info as present in omap_volt_pmic_info structure.
1409  */
1410 int omap_voltage_register_pmic(struct voltagedomain *voltdm,
1411                 struct omap_volt_pmic_info *pmic_info)
1412 {
1413         struct omap_vdd_info *vdd;
1414
1415         if (!voltdm || IS_ERR(voltdm)) {
1416                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1417                 return -EINVAL;
1418         }
1419
1420         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1421
1422         vdd->pmic_info = pmic_info;
1423
1424         return 0;
1425 }
1426
1427 /**
1428  * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
1429  *                              corresponding to a voltage domain.
1430  *
1431  * @voltdm:     pointer to the VDD whose debug directory is required.
1432  *
1433  * This API returns pointer to the debugfs directory corresponding
1434  * to the voltage domain. Should be used by drivers requiring to
1435  * add any debug entry for a particular voltage domain. Returns NULL
1436  * in case of error.
1437  */
1438 struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
1439 {
1440         struct omap_vdd_info *vdd;
1441
1442         if (!voltdm || IS_ERR(voltdm)) {
1443                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1444                 return NULL;
1445         }
1446
1447         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1448
1449         return vdd->debug_dir;
1450 }
1451
1452 /**
1453  * omap_change_voltscale_method() - API to change the voltage scaling method.
1454  * @voltdm:     pointer to the VDD whose voltage scaling method
1455  *              has to be changed.
1456  * @voltscale_method:   the method to be used for voltage scaling.
1457  *
1458  * This API can be used by the board files to change the method of voltage
1459  * scaling between vpforceupdate and vcbypass. The parameter values are
1460  * defined in voltage.h
1461  */
1462 void omap_change_voltscale_method(struct voltagedomain *voltdm,
1463                 int voltscale_method)
1464 {
1465         struct omap_vdd_info *vdd;
1466
1467         if (!voltdm || IS_ERR(voltdm)) {
1468                 pr_warning("%s: VDD specified does not exist!\n", __func__);
1469                 return;
1470         }
1471
1472         vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
1473
1474         switch (voltscale_method) {
1475         case VOLTSCALE_VPFORCEUPDATE:
1476                 vdd->volt_scale = vp_forceupdate_scale_voltage;
1477                 return;
1478         case VOLTSCALE_VCBYPASS:
1479                 vdd->volt_scale = vc_bypass_scale_voltage;
1480                 return;
1481         default:
1482                 pr_warning("%s: Trying to change the method of voltage scaling"
1483                         "to an unsupported one!\n", __func__);
1484         }
1485 }
1486
1487 /**
1488  * omap_voltage_domain_lookup() - API to get the voltage domain pointer
1489  * @name:       Name of the voltage domain
1490  *
1491  * This API looks up in the global vdd_info struct for the
1492  * existence of voltage domain <name>. If it exists, the API returns
1493  * a pointer to the voltage domain structure corresponding to the
1494  * VDD<name>. Else retuns error pointer.
1495  */
1496 struct voltagedomain *omap_voltage_domain_lookup(char *name)
1497 {
1498         int i;
1499
1500         if (!vdd_info) {
1501                 pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
1502                         __func__);
1503                 return ERR_PTR(-EINVAL);
1504         }
1505
1506         if (!name) {
1507                 pr_err("%s: No name to get the votage domain!\n", __func__);
1508                 return ERR_PTR(-EINVAL);
1509         }
1510
1511         for (i = 0; i < nr_scalable_vdd; i++) {
1512                 if (!(strcmp(name, vdd_info[i].voltdm.name)))
1513                         return &vdd_info[i].voltdm;
1514         }
1515
1516         return ERR_PTR(-EINVAL);
1517 }
1518
1519 /**
1520  * omap_voltage_late_init() - Init the various voltage parameters
1521  *
1522  * This API is to be called in the later stages of the
1523  * system boot to init the voltage controller and
1524  * voltage processors.
1525  */
1526 int __init omap_voltage_late_init(void)
1527 {
1528         int i;
1529
1530         if (!vdd_info) {
1531                 pr_err("%s: Voltage driver support not added\n",
1532                         __func__);
1533                 return -EINVAL;
1534         }
1535
1536         voltage_dir = debugfs_create_dir("voltage", NULL);
1537         if (IS_ERR(voltage_dir))
1538                 pr_err("%s: Unable to create voltage debugfs main dir\n",
1539                         __func__);
1540         for (i = 0; i < nr_scalable_vdd; i++) {
1541                 if (vdd_data_configure(&vdd_info[i]))
1542                         continue;
1543                 vc_init(&vdd_info[i]);
1544                 vp_init(&vdd_info[i]);
1545                 vdd_debugfs_init(&vdd_info[i]);
1546         }
1547
1548         return 0;
1549 }
1550
1551 /**
1552  * omap_voltage_early_init()- Volatage driver early init
1553  */
1554 static int __init omap_voltage_early_init(void)
1555 {
1556         if (cpu_is_omap34xx()) {
1557                 vdd_info = omap3_vdd_info;
1558                 nr_scalable_vdd = OMAP3_NR_SCALABLE_VDD;
1559                 vc_init = omap3_vc_init;
1560                 vdd_data_configure = omap3_vdd_data_configure;
1561         } else if (cpu_is_omap44xx()) {
1562                 vdd_info = omap4_vdd_info;
1563                 nr_scalable_vdd = OMAP4_NR_SCALABLE_VDD;
1564                 vc_init = omap4_vc_init;
1565                 vdd_data_configure = omap4_vdd_data_configure;
1566         } else {
1567                 pr_warning("%s: voltage driver support not added\n", __func__);
1568         }
1569
1570         return 0;
1571 }
1572 core_initcall(omap_voltage_early_init);