arch/arm/mach-omap2/usb-ehci.c

   1 /*
   2  * linux/arch/arm/mach-omap2/usb-ehci.c
   3  *
   4  * This file will contain the board specific details for the
   5  * Synopsys EHCI host controller on OMAP3430
   6  *
   7  * Copyright (C) 2007 Texas Instruments
   8  * Author: Vikram Pandita <vikram.pandita@ti.com>
   9  *
  10  * Generalization by:
  11  * Felipe Balbi <felipe.balbi@nokia.com>
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License version 2 as
  15  * published by the Free Software Foundation.
  16  */
  17
  18 #include <linux/types.h>
  19 #include <linux/errno.h>
  20 #include <linux/delay.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/clk.h>
  23 #include <linux/dma-mapping.h>
  24
  25 #include <asm/io.h>
  26
  27 #include <mach/hardware.h>
  28 #include <mach/irqs.h>
  29 #include <plat/usb.h>
  30
  31 #include "mux.h"
  32
  33 #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
  34
  35 static struct resource ehci_resources[] = {
  36         {
  37                 .start  = OMAP34XX_EHCI_BASE,
  38                 .end    = OMAP34XX_EHCI_BASE + SZ_1K - 1,
  39                 .flags  = IORESOURCE_MEM,
  40         },
  41         {
  42                 .start  = OMAP34XX_UHH_CONFIG_BASE,
  43                 .end    = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
  44                 .flags  = IORESOURCE_MEM,
  45         },
  46         {
  47                 .start  = OMAP34XX_USBTLL_BASE,
  48                 .end    = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
  49                 .flags  = IORESOURCE_MEM,
  50         },
  51         {         /* general IRQ */
  52                 .start   = INT_34XX_EHCI_IRQ,
  53                 .flags   = IORESOURCE_IRQ,
  54         }
  55 };
  56
  57 static u64 ehci_dmamask = ~(u32)0;
  58 static struct platform_device ehci_device = {
  59         .name           = "ehci-omap",
  60         .id             = 0,
  61         .dev = {
  62                 .dma_mask               = &ehci_dmamask,
  63                 .coherent_dma_mask      = 0xffffffff,
  64                 .platform_data          = NULL,
  65         },
  66         .num_resources  = ARRAY_SIZE(ehci_resources),
  67         .resource       = ehci_resources,
  68 };
  69
  70 /* MUX settings for EHCI pins */
  71 /*
  72  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  73  */
  74 static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
  75 {
  76         switch (port_mode[0]) {
  77         case EHCI_HCD_OMAP_MODE_PHY:
  78                 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
  79                 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
  80                 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
  81                 omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
  82                 omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
  83                 omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
  84                 omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
  85                 omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
  86                 omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
  87                 omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
  88                 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
  89                 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
  90                 break;
  91         case EHCI_HCD_OMAP_MODE_TLL:
  92                 omap_mux_init_signal("hsusb1_tll_stp",
  93                         OMAP_PIN_INPUT_PULLUP);
  94                 omap_mux_init_signal("hsusb1_tll_clk",
  95                         OMAP_PIN_INPUT_PULLDOWN);
  96                 omap_mux_init_signal("hsusb1_tll_dir",
  97                         OMAP_PIN_INPUT_PULLDOWN);
  98                 omap_mux_init_signal("hsusb1_tll_nxt",
  99                         OMAP_PIN_INPUT_PULLDOWN);
 100                 omap_mux_init_signal("hsusb1_tll_data0",
 101                         OMAP_PIN_INPUT_PULLDOWN);
 102                 omap_mux_init_signal("hsusb1_tll_data1",
 103                         OMAP_PIN_INPUT_PULLDOWN);
 104                 omap_mux_init_signal("hsusb1_tll_data2",
 105                         OMAP_PIN_INPUT_PULLDOWN);
 106                 omap_mux_init_signal("hsusb1_tll_data3",
 107                         OMAP_PIN_INPUT_PULLDOWN);
 108                 omap_mux_init_signal("hsusb1_tll_data4",
 109                         OMAP_PIN_INPUT_PULLDOWN);
 110                 omap_mux_init_signal("hsusb1_tll_data5",
 111                         OMAP_PIN_INPUT_PULLDOWN);
 112                 omap_mux_init_signal("hsusb1_tll_data6",
 113                         OMAP_PIN_INPUT_PULLDOWN);
 114                 omap_mux_init_signal("hsusb1_tll_data7",
 115                         OMAP_PIN_INPUT_PULLDOWN);
 116                 break;
 117         case EHCI_HCD_OMAP_MODE_UNKNOWN:
 118                 /* FALLTHROUGH */
 119         default:
 120                 break;
 121         }
 122
 123         switch (port_mode[1]) {
 124         case EHCI_HCD_OMAP_MODE_PHY:
 125                 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 126                 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 127                 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
 128                 omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
 129                 omap_mux_init_signal("hsusb2_data0",
 130                         OMAP_PIN_INPUT_PULLDOWN);
 131                 omap_mux_init_signal("hsusb2_data1",
 132                         OMAP_PIN_INPUT_PULLDOWN);
 133                 omap_mux_init_signal("hsusb2_data2",
 134                         OMAP_PIN_INPUT_PULLDOWN);
 135                 omap_mux_init_signal("hsusb2_data3",
 136                         OMAP_PIN_INPUT_PULLDOWN);
 137                 omap_mux_init_signal("hsusb2_data4",
 138                         OMAP_PIN_INPUT_PULLDOWN);
 139                 omap_mux_init_signal("hsusb2_data5",
 140                         OMAP_PIN_INPUT_PULLDOWN);
 141                 omap_mux_init_signal("hsusb2_data6",
 142                         OMAP_PIN_INPUT_PULLDOWN);
 143                 omap_mux_init_signal("hsusb2_data7",
 144                         OMAP_PIN_INPUT_PULLDOWN);
 145                 break;
 146         case EHCI_HCD_OMAP_MODE_TLL:
 147                 omap_mux_init_signal("hsusb2_tll_stp",
 148                         OMAP_PIN_INPUT_PULLUP);
 149                 omap_mux_init_signal("hsusb2_tll_clk",
 150                         OMAP_PIN_INPUT_PULLDOWN);
 151                 omap_mux_init_signal("hsusb2_tll_dir",
 152                         OMAP_PIN_INPUT_PULLDOWN);
 153                 omap_mux_init_signal("hsusb2_tll_nxt",
 154                         OMAP_PIN_INPUT_PULLDOWN);
 155                 omap_mux_init_signal("hsusb2_tll_data0",
 156                         OMAP_PIN_INPUT_PULLDOWN);
 157                 omap_mux_init_signal("hsusb2_tll_data1",
 158                         OMAP_PIN_INPUT_PULLDOWN);
 159                 omap_mux_init_signal("hsusb2_tll_data2",
 160                         OMAP_PIN_INPUT_PULLDOWN);
 161                 omap_mux_init_signal("hsusb2_tll_data3",
 162                         OMAP_PIN_INPUT_PULLDOWN);
 163                 omap_mux_init_signal("hsusb2_tll_data4",
 164                         OMAP_PIN_INPUT_PULLDOWN);
 165                 omap_mux_init_signal("hsusb2_tll_data5",
 166                         OMAP_PIN_INPUT_PULLDOWN);
 167                 omap_mux_init_signal("hsusb2_tll_data6",
 168                         OMAP_PIN_INPUT_PULLDOWN);
 169                 omap_mux_init_signal("hsusb2_tll_data7",
 170                         OMAP_PIN_INPUT_PULLDOWN);
 171                 break;
 172         case EHCI_HCD_OMAP_MODE_UNKNOWN:
 173                 /* FALLTHROUGH */
 174         default:
 175                 break;
 176         }
 177
 178         switch (port_mode[2]) {
 179         case EHCI_HCD_OMAP_MODE_PHY:
 180                 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 181                 break;
 182         case EHCI_HCD_OMAP_MODE_TLL:
 183                 omap_mux_init_signal("hsusb3_tll_stp",
 184                         OMAP_PIN_INPUT_PULLUP);
 185                 omap_mux_init_signal("hsusb3_tll_clk",
 186                         OMAP_PIN_INPUT_PULLDOWN);
 187                 omap_mux_init_signal("hsusb3_tll_dir",
 188                         OMAP_PIN_INPUT_PULLDOWN);
 189                 omap_mux_init_signal("hsusb3_tll_nxt",
 190                         OMAP_PIN_INPUT_PULLDOWN);
 191                 omap_mux_init_signal("hsusb3_tll_data0",
 192                         OMAP_PIN_INPUT_PULLDOWN);
 193                 omap_mux_init_signal("hsusb3_tll_data1",
 194                         OMAP_PIN_INPUT_PULLDOWN);
 195                 omap_mux_init_signal("hsusb3_tll_data2",
 196                         OMAP_PIN_INPUT_PULLDOWN);
 197                 omap_mux_init_signal("hsusb3_tll_data3",
 198                         OMAP_PIN_INPUT_PULLDOWN);
 199                 omap_mux_init_signal("hsusb3_tll_data4",
 200                         OMAP_PIN_INPUT_PULLDOWN);
 201                 omap_mux_init_signal("hsusb3_tll_data5",
 202                         OMAP_PIN_INPUT_PULLDOWN);
 203                 omap_mux_init_signal("hsusb3_tll_data6",
 204                         OMAP_PIN_INPUT_PULLDOWN);
 205                 omap_mux_init_signal("hsusb3_tll_data7",
 206                         OMAP_PIN_INPUT_PULLDOWN);
 207                 break;
 208         case EHCI_HCD_OMAP_MODE_UNKNOWN:
 209                 /* FALLTHROUGH */
 210         default:
 211                 break;
 212         }
 213
 214         return;
 215 }
 216
 217 void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 218 {
 219         platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 220
 221         /* Setup Pin IO MUX for EHCI */
 222         if (cpu_is_omap34xx())
 223                 setup_ehci_io_mux(pdata->port_mode);
 224
 225         if (platform_device_register(&ehci_device) < 0) {
 226                 printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
 227                 return;
 228         }
 229 }
 230
 231 #else
 232
 233 void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 234
 235 {
 236 }
 237
 238 #endif /* CONFIG_USB_EHCI_HCD */
 239
 240 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 241
 242 static struct resource ohci_resources[] = {
 243         {
 244                 .start  = OMAP34XX_OHCI_BASE,
 245                 .end    = OMAP34XX_OHCI_BASE + SZ_1K - 1,
 246                 .flags  = IORESOURCE_MEM,
 247         },
 248         {
 249                 .start  = OMAP34XX_UHH_CONFIG_BASE,
 250                 .end    = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
 251                 .flags  = IORESOURCE_MEM,
 252         },
 253         {
 254                 .start  = OMAP34XX_USBTLL_BASE,
 255                 .end    = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
 256                 .flags  = IORESOURCE_MEM,
 257         },
 258         {       /* general IRQ */
 259                 .start  = INT_34XX_OHCI_IRQ,
 260                 .flags  = IORESOURCE_IRQ,
 261         }
 262 };
 263
 264 static u64 ohci_dmamask = DMA_BIT_MASK(32);
 265
 266 static struct platform_device ohci_device = {
 267         .name           = "ohci-omap3",
 268         .id             = 0,
 269         .dev = {
 270                 .dma_mask               = &ohci_dmamask,
 271                 .coherent_dma_mask      = 0xffffffff,
 272         },
 273         .num_resources  = ARRAY_SIZE(ohci_resources),
 274         .resource       = ohci_resources,
 275 };
 276
 277 static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 278 {
 279         switch (port_mode[0]) {
 280         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 281         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 282         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 283         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 284                 omap_mux_init_signal("mm1_rxdp",
 285                         OMAP_PIN_INPUT_PULLDOWN);
 286                 omap_mux_init_signal("mm1_rxdm",
 287                         OMAP_PIN_INPUT_PULLDOWN);
 288                 /* FALLTHROUGH */
 289         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 290         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 291                 omap_mux_init_signal("mm1_rxrcv",
 292                         OMAP_PIN_INPUT_PULLDOWN);
 293                 /* FALLTHROUGH */
 294         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 295         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 296                 omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
 297                 /* FALLTHROUGH */
 298         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 299         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 300                 omap_mux_init_signal("mm1_txse0",
 301                         OMAP_PIN_INPUT_PULLDOWN);
 302                 omap_mux_init_signal("mm1_txdat",
 303                         OMAP_PIN_INPUT_PULLDOWN);
 304                 break;
 305         case OMAP_OHCI_PORT_MODE_UNUSED:
 306                 /* FALLTHROUGH */
 307         default:
 308                 break;
 309         }
 310         switch (port_mode[1]) {
 311         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 312         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 313         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 314         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 315                 omap_mux_init_signal("mm2_rxdp",
 316                         OMAP_PIN_INPUT_PULLDOWN);
 317                 omap_mux_init_signal("mm2_rxdm",
 318                         OMAP_PIN_INPUT_PULLDOWN);
 319                 /* FALLTHROUGH */
 320         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 321         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 322                 omap_mux_init_signal("mm2_rxrcv",
 323                         OMAP_PIN_INPUT_PULLDOWN);
 324                 /* FALLTHROUGH */
 325         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 326         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 327                 omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
 328                 /* FALLTHROUGH */
 329         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 330         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 331                 omap_mux_init_signal("mm2_txse0",
 332                         OMAP_PIN_INPUT_PULLDOWN);
 333                 omap_mux_init_signal("mm2_txdat",
 334                         OMAP_PIN_INPUT_PULLDOWN);
 335                 break;
 336         case OMAP_OHCI_PORT_MODE_UNUSED:
 337                 /* FALLTHROUGH */
 338         default:
 339                 break;
 340         }
 341         switch (port_mode[2]) {
 342         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 343         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 344         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 345         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 346                 omap_mux_init_signal("mm3_rxdp",
 347                         OMAP_PIN_INPUT_PULLDOWN);
 348                 omap_mux_init_signal("mm3_rxdm",
 349                         OMAP_PIN_INPUT_PULLDOWN);
 350                 /* FALLTHROUGH */
 351         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 352         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 353                 omap_mux_init_signal("mm3_rxrcv",
 354                         OMAP_PIN_INPUT_PULLDOWN);
 355                 /* FALLTHROUGH */
 356         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 357         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 358                 omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
 359                 /* FALLTHROUGH */
 360         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 361         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 362                 omap_mux_init_signal("mm3_txse0",
 363                         OMAP_PIN_INPUT_PULLDOWN);
 364                 omap_mux_init_signal("mm3_txdat",
 365                         OMAP_PIN_INPUT_PULLDOWN);
 366                 break;
 367         case OMAP_OHCI_PORT_MODE_UNUSED:
 368                 /* FALLTHROUGH */
 369         default:
 370                 break;
 371         }
 372 }
 373
 374 void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
 375 {
 376         platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
 377
 378         /* Setup Pin IO MUX for OHCI */
 379         if (cpu_is_omap34xx())
 380                 setup_ohci_io_mux(pdata->port_mode);
 381
 382         if (platform_device_register(&ohci_device) < 0) {
 383                 pr_err("Unable to register FS-USB (OHCI) device\n");
 384                 return;
 385         }
 386 }
 387
 388 #else
 389
 390 void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
 391 {
 392 }
 393
 394 #endif /* CONFIG_USB_OHCI_HCD */