arch/arm/mach-omap2/pm.c

   1 /*
   2  * linux/arch/arm/mach-omap2/pm.c
   3  *
   4  * OMAP2 Power Management Routines
   5  *
   6  * Copyright (C) 2006 Nokia Corporation
   7  * Tony Lindgren <tony@atomide.com>
   8  *
   9  * Copyright (C) 2005 Texas Instruments, Inc.
  10  * Richard Woodruff <r-woodruff2@ti.com>
  11  *
  12  * Based on pm.c for omap1
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/pm.h>
  20 #include <linux/sched.h>
  21 #include <linux/proc_fs.h>
  22 #include <linux/pm.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/sysfs.h>
  25 #include <linux/module.h>
  26
  27 #include <asm/io.h>
  28 #include <asm/irq.h>
  29 #include <asm/atomic.h>
  30 #include <asm/mach/time.h>
  31 #include <asm/mach/irq.h>
  32 #include <asm/mach-types.h>
  33
  34 #include <asm/arch/irqs.h>
  35 #include <asm/arch/clock.h>
  36 #include <asm/arch/sram.h>
  37 #include <asm/arch/pm.h>
  38
  39 static struct clk *vclk;
  40 static void (*omap2_sram_idle)(void);
  41 static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
  42 static void (*saved_idle)(void);
  43
  44 void omap2_pm_idle(void)
  45 {
  46         local_irq_disable();
  47         local_fiq_disable();
  48         if (need_resched()) {
  49                 local_fiq_enable();
  50                 local_irq_enable();
  51                 return;
  52         }
  53
  54         /*
  55          * Since an interrupt may set up a timer, we don't want to
  56          * reprogram the hardware timer with interrupts enabled.
  57          * Re-enable interrupts only after returning from idle.
  58          */
  59         timer_dyn_reprogram();
  60
  61         omap2_sram_idle();
  62         local_fiq_enable();
  63         local_irq_enable();
  64 }
  65
  66 static int omap2_pm_prepare(suspend_state_t state)
  67 {
  68         int error = 0;
  69
  70         /* We cannot sleep in idle until we have resumed */
  71         saved_idle = pm_idle;
  72         pm_idle = NULL;
  73
  74         switch (state)
  75         {
  76         case PM_SUSPEND_STANDBY:
  77         case PM_SUSPEND_MEM:
  78                 break;
  79
  80         case PM_SUSPEND_DISK:
  81                 return -ENOTSUPP;
  82
  83         default:
  84                 return -EINVAL;
  85         }
  86
  87         return error;
  88 }
  89
  90 static int omap2_pm_enter(suspend_state_t state)
  91 {
  92         switch (state)
  93         {
  94         case PM_SUSPEND_STANDBY:
  95         case PM_SUSPEND_MEM:
  96                 /* FIXME: Add suspend */
  97                 break;
  98
  99         case PM_SUSPEND_DISK:
 100                 return -ENOTSUPP;
 101
 102         default:
 103                 return -EINVAL;
 104         }
 105
 106         return 0;
 107 }
 108
 109 static int omap2_pm_finish(suspend_state_t state)
 110 {
 111         pm_idle = saved_idle;
 112         return 0;
 113 }
 114
 115 static struct pm_ops omap_pm_ops = {
 116         .pm_disk_mode   = 0,
 117         .prepare        = omap2_pm_prepare,
 118         .enter          = omap2_pm_enter,
 119         .finish         = omap2_pm_finish,
 120 };
 121
 122 int __init omap2_pm_init(void)
 123 {
 124         printk("Power Management for TI OMAP.\n");
 125
 126         vclk = clk_get(NULL, "virt_prcm_set");
 127         if (IS_ERR(vclk)) {
 128                 printk(KERN_ERR "Could not get PM vclk\n");
 129                 return -ENODEV;
 130         }
 131
 132         /*
 133          * We copy the assembler sleep/wakeup routines to SRAM.
 134          * These routines need to be in SRAM as that's the only
 135          * memory the MPU can see when it wakes up.
 136          */
 137         omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
 138                                          omap24xx_idle_loop_suspend_sz);
 139
 140         omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
 141                                             omap24xx_cpu_suspend_sz);
 142
 143         pm_set_ops(&omap_pm_ops);
 144         pm_idle = omap2_pm_idle;
 145
 146         return 0;
 147 }
 148
 149 __initcall(omap2_pm_init);