arch/arm/mach-omap2/opp2430_data.c

   1 /*
   2  * opp2430_data.c - old-style "OPP" table for OMAP2430
   3  *
   4  * Copyright (C) 2005-2009 Texas Instruments, Inc.
   5  * Copyright (C) 2004-2009 Nokia Corporation
   6  *
   7  * Richard Woodruff <r-woodruff2@ti.com>
   8  *
   9  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  10  * These configurations are characterized by voltage and speed for clocks.
  11  * The device is only validated for certain combinations. One way to express
  12  * these combinations is via the 'ratios' which the clocks operate with
  13  * respect to each other. These ratio sets are for a given voltage/DPLL
  14  * setting. All configurations can be described by a DPLL setting and a ratio.
  15  *
  16  * 2430 differs from 2420 in that there are no more phase synchronizers used.
  17  * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
  18  * 2430 (iva2.1, NOdsp, mdm)
  19  *
  20  * XXX Missing voltage data.
  21  * XXX Missing 19.2MHz sys_clk rate sets.
  22  *
  23  * THe format described in this file is deprecated.  Once a reasonable
  24  * OPP API exists, the data in this file should be converted to use it.
  25  *
  26  * This is technically part of the OMAP2xxx clock code.
  27  */
  28
  29 #include "opp2xxx.h"
  30 #include "sdrc.h"
  31 #include "clock.h"
  32
  33 /*
  34  * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  35  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  36  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  37  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  38  *
  39  * Filling in table based on 2430-SDPs variants available.  There are
  40  * quite a few more rate combinations which could be defined.
  41  *
  42  * When multiple values are defined the start up will try and choose
  43  * the fastest one. If a 'fast' value is defined, then automatically,
  44  * the /2 one should be included as it can be used.  Generally having
  45  * more than one fast set does not make sense, as static timings need
  46  * to be changed to change the set.  The exception is the bypass
  47  * setting which is available for low power bypass.
  48  *
  49  * Note: This table needs to be sorted, fastest to slowest.
  50  */
  51 const struct prcm_config omap2430_rate_table[] = {
  52         /* PRCM #4 - ratio2 (ES2.1) - FAST */
  53         {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,              /* 399MHz ARM */
  54                 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
  55                 R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
  56                 MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
  57                 SDRC_RFR_CTRL_133MHz,
  58                 RATE_IN_243X},
  59
  60         /* PRCM #2 - ratio1 (ES2) - FAST */
  61         {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,              /* 330MHz ARM */
  62                 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
  63                 R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
  64                 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
  65                 SDRC_RFR_CTRL_165MHz,
  66                 RATE_IN_243X},
  67
  68         /* PRCM #5a - ratio1 - FAST */
  69         {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,              /* 266MHz ARM */
  70                 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
  71                 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
  72                 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
  73                 SDRC_RFR_CTRL_133MHz,
  74                 RATE_IN_243X},
  75
  76         /* PRCM #5b - ratio1 - FAST */
  77         {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,              /* 200MHz ARM */
  78                 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
  79                 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
  80                 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
  81                 SDRC_RFR_CTRL_100MHz,
  82                 RATE_IN_243X},
  83
  84         /* PRCM #4 - ratio1 (ES2.1) - SLOW */
  85         {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,              /* 200MHz ARM */
  86                 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
  87                 R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
  88                 MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
  89                 SDRC_RFR_CTRL_133MHz,
  90                 RATE_IN_243X},
  91
  92         /* PRCM #2 - ratio1 (ES2) - SLOW */
  93         {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,              /* 165MHz ARM */
  94                 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
  95                 R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
  96                 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
  97                 SDRC_RFR_CTRL_165MHz,
  98                 RATE_IN_243X},
  99
 100         /* PRCM #5a - ratio1 - SLOW */
 101         {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,              /* 133MHz ARM */
 102                 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
 103                 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
 104                 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
 105                 SDRC_RFR_CTRL_133MHz,
 106                 RATE_IN_243X},
 107
 108         /* PRCM #5b - ratio1 - SLOW*/
 109         {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,              /* 100MHz ARM */
 110                 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
 111                 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
 112                 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
 113                 SDRC_RFR_CTRL_100MHz,
 114                 RATE_IN_243X},
 115
 116         /* PRCM-boot/bypass */
 117         {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,                /* 13Mhz */
 118                 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
 119                 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
 120                 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
 121                 SDRC_RFR_CTRL_BYPASS,
 122                 RATE_IN_243X},
 123
 124         /* PRCM-boot/bypass */
 125         {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,                /* 12Mhz */
 126                 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
 127                 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
 128                 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
 129                 SDRC_RFR_CTRL_BYPASS,
 130                 RATE_IN_243X},
 131
 132         { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
 133 };