arch/arm/mach-omap2/include/mach/debug-macro.S

   1 /* arch/arm/mach-omap2/include/mach/debug-macro.S
   2  *
   3  * Debugging macro include header
   4  *
   5  *  Copyright (C) 1994-1999 Russell King
   6  *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12 */
  13
  14 #include <linux/serial_reg.h>
  15
  16 #include <asm/memory.h>
  17
  18 #include <plat/serial.h>
  19
  20 #define UART_OFFSET(addr)       ((addr) & 0x00ffffff)
  21
  22                 .pushsection .data
  23 omap_uart_phys: .word   0
  24 omap_uart_virt: .word   0
  25 omap_uart_lsr:  .word   0
  26                 .popsection
  27
  28                 /*
  29                  * Note that this code won't work if the bootloader passes
  30                  * a wrong machine ID number in r1. To debug, just hardcode
  31                  * the desired UART phys and virt addresses temporarily into
  32                  * the omap_uart_phys and omap_uart_virt above.
  33                  */
  34                 .macro  addruart, rp, rv
  35
  36                 /* Use omap_uart_phys/virt if already configured */
  37 10:             mrc     p15, 0, \rp, c1, c0
  38                 tst     \rp, #1                 @ MMU enabled?
  39                 ldreq   \rp, =__virt_to_phys(omap_uart_phys)    @ MMU not enabled
  40                 ldrne   \rp, =omap_uart_phys    @ MMU enabled
  41                 add     \rv, \rp, #4            @ omap_uart_virt
  42                 ldr     \rp, [\rp, #0]
  43                 ldr     \rv, [\rv, #0]
  44                 cmp     \rp, #0                 @ is port configured?
  45                 cmpne   \rv, #0
  46                 bne     99f                     @ already configured
  47
  48                 /* Check the debug UART configuration set in uncompress.h */
  49                 mrc     p15, 0, \rp, c1, c0
  50                 tst     \rp, #1                 @ MMU enabled?
  51                 ldreq   \rp, =OMAP_UART_INFO    @ MMU not enabled
  52                 ldrne   \rp, =__phys_to_virt(OMAP_UART_INFO)    @ MMU enabled
  53                 ldr     \rp, [\rp, #0]
  54
  55                 /* Select the UART to use based on the UART1 scratchpad value */
  56                 cmp     \rp, #0                 @ no port configured?
  57                 beq     21f                     @ if none, try to use UART1
  58                 cmp     \rp, #OMAP2UART1        @ OMAP2/3/4UART1
  59                 beq     21f                     @ configure OMAP2/3/4UART1
  60                 cmp     \rp, #OMAP2UART2        @ OMAP2/3/4UART2
  61                 beq     22f                     @ configure OMAP2/3/4UART2
  62                 cmp     \rp, #OMAP2UART3        @ only on 24xx
  63                 beq     23f                     @ configure OMAP2UART3
  64                 cmp     \rp, #OMAP3UART3        @ only on 34xx
  65                 beq     33f                     @ configure OMAP3UART3
  66                 cmp     \rp, #OMAP4UART3        @ only on 44xx
  67                 beq     43f                     @ configure OMAP4UART3
  68                 cmp     \rp, #OMAP3UART4        @ only on 36xx
  69                 beq     34f                     @ configure OMAP3UART4
  70                 cmp     \rp, #OMAP4UART4        @ only on 44xx
  71                 beq     44f                     @ configure OMAP4UART4
  72                 cmp     \rp, #ZOOM_UART         @ only on zoom2/3
  73                 beq     95f                     @ configure ZOOM_UART
  74
  75                 /* Configure the UART offset from the phys/virt base */
  76 21:             mov     \rp, #UART_OFFSET(OMAP2_UART1_BASE)     @ omap2/3/4
  77                 b       98f
  78 22:             mov     \rp, #UART_OFFSET(OMAP2_UART2_BASE)     @ omap2/3/4
  79                 b       98f
  80 23:             mov     \rp, #UART_OFFSET(OMAP2_UART3_BASE)
  81                 b       98f
  82 33:             mov     \rp, #UART_OFFSET(OMAP3_UART1_BASE)
  83                 add     \rp, \rp, #0x00fb0000
  84                 add     \rp, \rp, #0x00006000           @ OMAP3_UART3_BASE
  85                 b       98f
  86 34:             mov     \rp, #UART_OFFSET(OMAP3_UART1_BASE)
  87                 add     \rp, \rp, #0x00fb0000
  88                 add     \rp, \rp, #0x00028000           @ OMAP3_UART4_BASE
  89                 b       98f
  90 43:             mov     \rp, #UART_OFFSET(OMAP4_UART3_BASE)
  91                 b       98f
  92 44:             mov     \rp, #UART_OFFSET(OMAP4_UART4_BASE)
  93                 b       98f
  94 95:             ldr     \rp, =ZOOM_UART_BASE
  95                 mrc     p15, 0, \rv, c1, c0
  96                 tst     \rv, #1                 @ MMU enabled?
  97                 ldreq   \rv, =__virt_to_phys(omap_uart_phys)    @ MMU not enabled
  98                 ldrne   \rv, =omap_uart_phys    @ MMU enabled
  99                 str     \rp, [\rv, #0]
 100                 ldr     \rp, =ZOOM_UART_VIRT
 101                 add     \rv, \rv, #4            @ omap_uart_virt
 102                 str     \rp, [\rv, #0]
 103                 mov     \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
 104                 add     \rv, \rv, #4            @ omap_uart_lsr
 105                 str     \rp, [\rv, #0]
 106                 b       10b
 107
 108                 /* Store both phys and virt address for the uart */
 109 98:             add     \rp, \rp, #0x48000000   @ phys base
 110                 mrc     p15, 0, \rv, c1, c0
 111                 tst     \rv, #1                 @ MMU enabled?
 112                 ldreq   \rv, =__virt_to_phys(omap_uart_phys)    @ MMU not enabled
 113                 ldrne   \rv, =omap_uart_phys    @ MMU enabled
 114                 str     \rp, [\rv, #0]
 115                 sub     \rp, \rp, #0x48000000   @ phys base
 116                 add     \rp, \rp, #0xfa000000   @ virt base
 117                 add     \rv, \rv, #4            @ omap_uart_virt
 118                 str     \rp, [\rv, #0]
 119                 mov     \rp, #(UART_LSR << OMAP_PORT_SHIFT)
 120                 add     \rv, \rv, #4            @ omap_uart_lsr
 121                 str     \rp, [\rv, #0]
 122
 123                 b       10b
 124 99:
 125                 .endm
 126
 127                 .macro  senduart,rd,rx
 128                 strb    \rd, [\rx]
 129                 .endm
 130
 131                 .macro  busyuart,rd,rx
 132 1001:           mrc     p15, 0, \rd, c1, c0
 133                 tst     \rd, #1                 @ MMU enabled?
 134                 ldreq   \rd, =__virt_to_phys(omap_uart_lsr)     @ MMU not enabled
 135                 ldrne   \rd, =omap_uart_lsr     @ MMU enabled
 136                 ldr     \rd, [\rd, #0]
 137                 ldrb    \rd, [\rx, \rd]
 138                 and     \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 139                 teq     \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 140                 bne     1001b
 141                 .endm
 142
 143                 .macro  waituart,rd,rx
 144                 .endm