arch/arm/mach-omap2/clock.c

   1 /*
   2  *  linux/arch/arm/mach-omap2/clock.c
   3  *
   4  *  Copyright (C) 2005 Texas Instruments Inc.
   5  *  Richard Woodruff <r-woodruff2@ti.com>
   6  *  Created for OMAP2.
   7  *
   8  *  Cleaned up and modified to use omap shared clock framework by
   9  *  Tony Lindgren <tony@atomide.com>
  10  *
  11  *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
  12  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18 #include <linux/module.h>
  19 #include <linux/kernel.h>
  20 #include <linux/device.h>
  21 #include <linux/list.h>
  22 #include <linux/errno.h>
  23 #include <linux/delay.h>
  24 #include <linux/clk.h>
  25
  26 #include <asm/io.h>
  27
  28 #include <asm/arch/clock.h>
  29 #include <asm/arch/sram.h>
  30
  31 #include "prcm-regs.h"
  32 #include "memory.h"
  33 #include "clock.h"
  34
  35 //#define DOWN_VARIABLE_DPLL 1                  /* Experimental */
  36
  37 static struct prcm_config *curr_prcm_set;
  38 static u32 curr_perf_level = PRCM_FULL_SPEED;
  39
  40 /*-------------------------------------------------------------------------
  41  * Omap2 specific clock functions
  42  *-------------------------------------------------------------------------*/
  43
  44 /* Recalculate SYST_CLK */
  45 static void omap2_sys_clk_recalc(struct clk * clk)
  46 {
  47         u32 div = PRCM_CLKSRC_CTRL;
  48         div &= (1 << 7) | (1 << 6);     /* Test if ext clk divided by 1 or 2 */
  49         div >>= clk->rate_offset;
  50         clk->rate = (clk->parent->rate / div);
  51         propagate_rate(clk);
  52 }
  53
  54 static u32 omap2_get_dpll_rate(struct clk * tclk)
  55 {
  56         long long dpll_clk;
  57         int dpll_mult, dpll_div, amult;
  58
  59         dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;    /* 10 bits */
  60         dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;        /* 4 bits */
  61         dpll_clk = (long long)tclk->parent->rate * dpll_mult;
  62         do_div(dpll_clk, dpll_div + 1);
  63         amult = CM_CLKSEL2_PLL & 0x3;
  64         dpll_clk *= amult;
  65
  66         return dpll_clk;
  67 }
  68
  69 static void omap2_followparent_recalc(struct clk *clk)
  70 {
  71         followparent_recalc(clk);
  72 }
  73
  74 static void omap2_propagate_rate(struct clk * clk)
  75 {
  76         if (!(clk->flags & RATE_FIXED))
  77                 clk->rate = clk->parent->rate;
  78
  79         propagate_rate(clk);
  80 }
  81
  82 /* Enable an APLL if off */
  83 static void omap2_clk_fixed_enable(struct clk *clk)
  84 {
  85         u32 cval, i=0;
  86
  87         if (clk->enable_bit == 0xff)                    /* Parent will do it */
  88                 return;
  89
  90         cval = CM_CLKEN_PLL;
  91
  92         if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
  93                 return;
  94
  95         cval &= ~(0x3 << clk->enable_bit);
  96         cval |= (0x3 << clk->enable_bit);
  97         CM_CLKEN_PLL = cval;
  98
  99         if (clk == &apll96_ck)
 100                 cval = (1 << 8);
 101         else if (clk == &apll54_ck)
 102                 cval = (1 << 6);
 103
 104         while (!CM_IDLEST_CKGEN & cval) {               /* Wait for lock */
 105                 ++i;
 106                 udelay(1);
 107                 if (i == 100000)
 108                         break;
 109         }
 110 }
 111
 112 /* Enables clock without considering parent dependencies or use count
 113  * REVISIT: Maybe change this to use clk->enable like on omap1?
 114  */
 115 static int _omap2_clk_enable(struct clk * clk)
 116 {
 117         u32 regval32;
 118
 119         if (clk->flags & ALWAYS_ENABLED)
 120                 return 0;
 121
 122         if (unlikely(clk->enable_reg == 0)) {
 123                 printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 124                        clk->name);
 125                 return 0;
 126         }
 127
 128         if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
 129                 omap2_clk_fixed_enable(clk);
 130                 return 0;
 131         }
 132
 133         regval32 = __raw_readl(clk->enable_reg);
 134         regval32 |= (1 << clk->enable_bit);
 135         __raw_writel(regval32, clk->enable_reg);
 136
 137         return 0;
 138 }
 139
 140 /* Stop APLL */
 141 static void omap2_clk_fixed_disable(struct clk *clk)
 142 {
 143         u32 cval;
 144
 145         if(clk->enable_bit == 0xff)             /* let parent off do it */
 146                 return;
 147
 148         cval = CM_CLKEN_PLL;
 149         cval &= ~(0x3 << clk->enable_bit);
 150         CM_CLKEN_PLL = cval;
 151 }
 152
 153 /* Disables clock without considering parent dependencies or use count */
 154 static void _omap2_clk_disable(struct clk *clk)
 155 {
 156         u32 regval32;
 157
 158         if (clk->enable_reg == 0)
 159                 return;
 160
 161         if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
 162                 omap2_clk_fixed_disable(clk);
 163                 return;
 164         }
 165
 166         regval32 = __raw_readl(clk->enable_reg);
 167         regval32 &= ~(1 << clk->enable_bit);
 168         __raw_writel(regval32, clk->enable_reg);
 169 }
 170
 171 static int omap2_clk_enable(struct clk *clk)
 172 {
 173         int ret = 0;
 174
 175         if (clk->usecount++ == 0) {
 176                 if (likely((u32)clk->parent))
 177                         ret = omap2_clk_enable(clk->parent);
 178
 179                 if (unlikely(ret != 0)) {
 180                         clk->usecount--;
 181                         return ret;
 182                 }
 183
 184                 ret = _omap2_clk_enable(clk);
 185
 186                 if (unlikely(ret != 0) && clk->parent) {
 187                         omap2_clk_disable(clk->parent);
 188                         clk->usecount--;
 189                 }
 190         }
 191
 192         return ret;
 193 }
 194
 195 static void omap2_clk_disable(struct clk *clk)
 196 {
 197         if (clk->usecount > 0 && !(--clk->usecount)) {
 198                 _omap2_clk_disable(clk);
 199                 if (likely((u32)clk->parent))
 200                         omap2_clk_disable(clk->parent);
 201         }
 202 }
 203
 204 /*
 205  * Uses the current prcm set to tell if a rate is valid.
 206  * You can go slower, but not faster within a given rate set.
 207  */
 208 static u32 omap2_dpll_round_rate(unsigned long target_rate)
 209 {
 210         u32 high, low;
 211
 212         if ((CM_CLKSEL2_PLL & 0x3) == 1) {      /* DPLL clockout */
 213                 high = curr_prcm_set->dpll_speed * 2;
 214                 low = curr_prcm_set->dpll_speed;
 215         } else {                                /* DPLL clockout x 2 */
 216                 high = curr_prcm_set->dpll_speed;
 217                 low = curr_prcm_set->dpll_speed / 2;
 218         }
 219
 220 #ifdef DOWN_VARIABLE_DPLL
 221         if (target_rate > high)
 222                 return high;
 223         else
 224                 return target_rate;
 225 #else
 226         if (target_rate > low)
 227                 return high;
 228         else
 229                 return low;
 230 #endif
 231
 232 }
 233
 234 /*
 235  * Used for clocks that are part of CLKSEL_xyz governed clocks.
 236  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
 237  */
 238 static void omap2_clksel_recalc(struct clk * clk)
 239 {
 240         u32 fixed = 0, div = 0;
 241
 242         if (clk == &dpll_ck) {
 243                 clk->rate = omap2_get_dpll_rate(clk);
 244                 fixed = 1;
 245                 div = 0;
 246         }
 247
 248         if (clk == &iva1_mpu_int_ifck) {
 249                 div = 2;
 250                 fixed = 1;
 251         }
 252
 253         if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
 254                 clk->rate = sys_ck.rate;
 255                 return;
 256         }
 257
 258         if (!fixed) {
 259                 div = omap2_clksel_get_divisor(clk);
 260                 if (div == 0)
 261                         return;
 262         }
 263
 264         if (div != 0) {
 265                 if (unlikely(clk->rate == clk->parent->rate / div))
 266                         return;
 267                 clk->rate = clk->parent->rate / div;
 268         }
 269
 270         if (unlikely(clk->flags & RATE_PROPAGATES))
 271                 propagate_rate(clk);
 272 }
 273
 274 /*
 275  * Finds best divider value in an array based on the source and target
 276  * rates. The divider array must be sorted with smallest divider first.
 277  */
 278 static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
 279                                            u32 src_rate, u32 tgt_rate)
 280 {
 281         int i, test_rate;
 282
 283         if (div_array == NULL)
 284                 return ~1;
 285
 286         for (i=0; i < size; i++) {
 287                 test_rate = src_rate / *div_array;
 288                 if (test_rate <= tgt_rate)
 289                         return *div_array;
 290                 ++div_array;
 291         }
 292
 293         return ~0;      /* No acceptable divider */
 294 }
 295
 296 /*
 297  * Find divisor for the given clock and target rate.
 298  *
 299  * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
 300  * they are only settable as part of virtual_prcm set.
 301  */
 302 static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
 303         u32 *new_div)
 304 {
 305         u32 gfx_div[] = {2, 3, 4};
 306         u32 sysclkout_div[] = {1, 2, 4, 8, 16};
 307         u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
 308         u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
 309         u32 best_div = ~0, asize = 0;
 310         u32 *div_array = NULL;
 311
 312         switch (tclk->flags & SRC_RATE_SEL_MASK) {
 313         case CM_GFX_SEL1:
 314                 asize = 3;
 315                 div_array = gfx_div;
 316                 break;
 317         case CM_PLL_SEL1:
 318                 return omap2_dpll_round_rate(target_rate);
 319         case CM_SYSCLKOUT_SEL1:
 320                 asize = 5;
 321                 div_array = sysclkout_div;
 322                 break;
 323         case CM_CORE_SEL1:
 324                 if(tclk == &dss1_fck){
 325                         if(tclk->parent == &core_ck){
 326                                 asize = 10;
 327                                 div_array = dss1_div;
 328                         } else {
 329                                 *new_div = 0; /* fixed clk */
 330                                 return(tclk->parent->rate);
 331                         }
 332                 } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
 333                         if(tclk->parent == &core_ck){
 334                                 asize = 10;
 335                                 div_array = vylnq_div;
 336                         } else {
 337                                 *new_div = 0; /* fixed clk */
 338                                 return(tclk->parent->rate);
 339                         }
 340                 }
 341                 break;
 342         }
 343
 344         best_div = omap2_divider_from_table(asize, div_array,
 345          tclk->parent->rate, target_rate);
 346         if (best_div == ~0){
 347                 *new_div = 1;
 348                 return best_div; /* signal error */
 349         }
 350
 351         *new_div = best_div;
 352         return (tclk->parent->rate / best_div);
 353 }
 354
 355 /* Given a clock and a rate apply a clock specific rounding function */
 356 static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 357 {
 358         u32 new_div = 0;
 359         int valid_rate;
 360
 361         if (clk->flags & RATE_FIXED)
 362                 return clk->rate;
 363
 364         if (clk->flags & RATE_CKCTL) {
 365                 valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
 366                 return valid_rate;
 367         }
 368
 369         if (clk->round_rate != 0)
 370                 return clk->round_rate(clk, rate);
 371
 372         return clk->rate;
 373 }
 374
 375 /*
 376  * Check the DLL lock state, and return tue if running in unlock mode.
 377  * This is needed to compenste for the shifted DLL value in unlock mode.
 378  */
 379 static u32 omap2_dll_force_needed(void)
 380 {
 381         u32 dll_state = SDRC_DLLA_CTRL;         /* dlla and dllb are a set */
 382
 383         if ((dll_state & (1 << 2)) == (1 << 2))
 384                 return 1;
 385         else
 386                 return 0;
 387 }
 388
 389 static u32 omap2_reprogram_sdrc(u32 level, u32 force)
 390 {
 391         u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
 392         u32 prev = curr_perf_level, flags;
 393
 394         if ((curr_perf_level == level) && !force)
 395                 return prev;
 396
 397         m_type = omap2_memory_get_type();
 398         slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
 399         fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
 400
 401         if (level == PRCM_HALF_SPEED) {
 402                 local_irq_save(flags);
 403                 PRCM_VOLTSETUP = 0xffff;
 404                 omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
 405                                           slow_dll_ctrl, m_type);
 406                 curr_perf_level = PRCM_HALF_SPEED;
 407                 local_irq_restore(flags);
 408         }
 409         if (level == PRCM_FULL_SPEED) {
 410                 local_irq_save(flags);
 411                 PRCM_VOLTSETUP = 0xffff;
 412                 omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
 413                                           fast_dll_ctrl, m_type);
 414                 curr_perf_level = PRCM_FULL_SPEED;
 415                 local_irq_restore(flags);
 416         }
 417
 418         return prev;
 419 }
 420
 421 static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
 422 {
 423         u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
 424         u32 bypass = 0;
 425         struct prcm_config tmpset;
 426         int ret = -EINVAL;
 427
 428         local_irq_save(flags);
 429         cur_rate = omap2_get_dpll_rate(&dpll_ck);
 430         mult = CM_CLKSEL2_PLL & 0x3;
 431
 432         if ((rate == (cur_rate / 2)) && (mult == 2)) {
 433                 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
 434         } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
 435                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
 436         } else if (rate != cur_rate) {
 437                 valid_rate = omap2_dpll_round_rate(rate);
 438                 if (valid_rate != rate)
 439                         goto dpll_exit;
 440
 441                 if ((CM_CLKSEL2_PLL & 0x3) == 1)
 442                         low = curr_prcm_set->dpll_speed;
 443                 else
 444                         low = curr_prcm_set->dpll_speed / 2;
 445
 446                 tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
 447                 tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
 448                 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
 449                 tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
 450                 tmpset.cm_clksel2_pll &= ~0x3;
 451                 if (rate > low) {
 452                         tmpset.cm_clksel2_pll |= 0x2;
 453                         mult = ((rate / 2) / 1000000);
 454                         done_rate = PRCM_FULL_SPEED;
 455                 } else {
 456                         tmpset.cm_clksel2_pll |= 0x1;
 457                         mult = (rate / 1000000);
 458                         done_rate = PRCM_HALF_SPEED;
 459                 }
 460                 tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
 461
 462                 /* Worst case */
 463                 tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
 464
 465                 if (rate == curr_prcm_set->xtal_speed)  /* If asking for 1-1 */
 466                         bypass = 1;
 467
 468                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
 469
 470                 /* Force dll lock mode */
 471                 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
 472                                bypass);
 473
 474                 /* Errata: ret dll entry state */
 475                 omap2_init_memory_params(omap2_dll_force_needed());
 476                 omap2_reprogram_sdrc(done_rate, 0);
 477         }
 478         omap2_clksel_recalc(&dpll_ck);
 479         ret = 0;
 480
 481 dpll_exit:
 482         local_irq_restore(flags);
 483         return(ret);
 484 }
 485
 486 /* Just return the MPU speed */
 487 static void omap2_mpu_recalc(struct clk * clk)
 488 {
 489         clk->rate = curr_prcm_set->mpu_speed;
 490 }
 491
 492 /*
 493  * Look for a rate equal or less than the target rate given a configuration set.
 494  *
 495  * What's not entirely clear is "which" field represents the key field.
 496  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
 497  * just uses the ARM rates.
 498  */
 499 static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
 500 {
 501         struct prcm_config * ptr;
 502         long highest_rate;
 503
 504         if (clk != &virt_prcm_set)
 505                 return -EINVAL;
 506
 507         highest_rate = -EINVAL;
 508
 509         for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 510                 if (ptr->xtal_speed != sys_ck.rate)
 511                         continue;
 512
 513                 highest_rate = ptr->mpu_speed;
 514
 515                 /* Can check only after xtal frequency check */
 516                 if (ptr->mpu_speed <= rate)
 517                         break;
 518         }
 519         return highest_rate;
 520 }
 521
 522 /*
 523  * omap2_convert_field_to_div() - turn field value into integer divider
 524  */
 525 static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
 526 {
 527         u32 i;
 528         u32 clkout_array[] = {1, 2, 4, 8, 16};
 529
 530         if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
 531                 for (i = 0; i < 5; i++) {
 532                         if (field_val == i)
 533                                 return clkout_array[i];
 534                 }
 535                 return ~0;
 536         } else
 537                 return field_val;
 538 }
 539
 540 /*
 541  * Returns the CLKSEL divider register value
 542  * REVISIT: This should be cleaned up to work nicely with void __iomem *
 543  */
 544 static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
 545                             struct clk *clk)
 546 {
 547         int ret = ~0;
 548         u32 reg_val, div_off;
 549         u32 div_addr = 0;
 550         u32 mask = ~0;
 551
 552         div_off = clk->rate_offset;
 553
 554         switch ((*div_sel & SRC_RATE_SEL_MASK)) {
 555         case CM_MPU_SEL1:
 556                 div_addr = (u32)&CM_CLKSEL_MPU;
 557                 mask = 0x1f;
 558                 break;
 559         case CM_DSP_SEL1:
 560                 div_addr = (u32)&CM_CLKSEL_DSP;
 561                 if (cpu_is_omap2420()) {
 562                         if ((div_off == 0) || (div_off == 8))
 563                                 mask = 0x1f;
 564                         else if (div_off == 5)
 565                                 mask = 0x3;
 566                 } else if (cpu_is_omap2430()) {
 567                         if (div_off == 0)
 568                                 mask = 0x1f;
 569                         else if (div_off == 5)
 570                                 mask = 0x3;
 571                 }
 572                 break;
 573         case CM_GFX_SEL1:
 574                 div_addr = (u32)&CM_CLKSEL_GFX;
 575                 if (div_off == 0)
 576                         mask = 0x7;
 577                 break;
 578         case CM_MODEM_SEL1:
 579                 div_addr = (u32)&CM_CLKSEL_MDM;
 580                 if (div_off == 0)
 581                         mask = 0xf;
 582                 break;
 583         case CM_SYSCLKOUT_SEL1:
 584                 div_addr = (u32)&PRCM_CLKOUT_CTRL;
 585                 if ((div_off == 3) || (div_off = 11))
 586                         mask= 0x3;
 587                 break;
 588         case CM_CORE_SEL1:
 589                 div_addr = (u32)&CM_CLKSEL1_CORE;
 590                 switch (div_off) {
 591                 case 0:                                 /* l3 */
 592                 case 8:                                 /* dss1 */
 593                 case 15:                                /* vylnc-2420 */
 594                 case 20:                                /* ssi */
 595                         mask = 0x1f; break;
 596                 case 5:                                 /* l4 */
 597                         mask = 0x3; break;
 598                 case 13:                                /* dss2 */
 599                         mask = 0x1; break;
 600                 case 25:                                /* usb */
 601                         mask = 0x7; break;
 602                 }
 603         }
 604
 605         *field_mask = mask;
 606
 607         if (unlikely(mask == ~0))
 608                 div_addr = 0;
 609
 610         *div_sel = div_addr;
 611
 612         if (unlikely(div_addr == 0))
 613                 return ret;
 614
 615         /* Isolate field */
 616         reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
 617
 618         /* Normalize back to divider value */
 619         reg_val >>= div_off;
 620
 621         return reg_val;
 622 }
 623
 624 /*
 625  * Return divider to be applied to parent clock.
 626  * Return 0 on error.
 627  */
 628 static u32 omap2_clksel_get_divisor(struct clk *clk)
 629 {
 630         int ret = 0;
 631         u32 div, div_sel, div_off, field_mask, field_val;
 632
 633         /* isolate control register */
 634         div_sel = (SRC_RATE_SEL_MASK & clk->flags);
 635
 636         div_off = clk->rate_offset;
 637         field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
 638         if (div_sel == 0)
 639                 return ret;
 640
 641         div_sel = (SRC_RATE_SEL_MASK & clk->flags);
 642         div = omap2_clksel_to_divisor(div_sel, field_val);
 643
 644         return div;
 645 }
 646
 647 /* Set the clock rate for a clock source */
 648 static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 649
 650 {
 651         int ret = -EINVAL;
 652         void __iomem * reg;
 653         u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
 654         u32 new_div = 0;
 655
 656         if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
 657                 if (clk == &dpll_ck)
 658                         return omap2_reprogram_dpll(clk, rate);
 659
 660                 /* Isolate control register */
 661                 div_sel = (SRC_RATE_SEL_MASK & clk->flags);
 662                 div_off = clk->rate_offset;
 663
 664                 validrate = omap2_clksel_round_rate(clk, rate, &new_div);
 665                 if (validrate != rate)
 666                         return(ret);
 667
 668                 field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
 669                 if (div_sel == 0)
 670                         return ret;
 671
 672                 if (clk->flags & CM_SYSCLKOUT_SEL1) {
 673                         switch (new_div) {
 674                         case 16:
 675                                 field_val = 4;
 676                                 break;
 677                         case 8:
 678                                 field_val = 3;
 679                                 break;
 680                         case 4:
 681                                 field_val = 2;
 682                                 break;
 683                         case 2:
 684                                 field_val = 1;
 685                                 break;
 686                         case 1:
 687                                 field_val = 0;
 688                                 break;
 689                         }
 690                 } else
 691                         field_val = new_div;
 692
 693                 reg = (void __iomem *)div_sel;
 694
 695                 reg_val = __raw_readl(reg);
 696                 reg_val &= ~(field_mask << div_off);
 697                 reg_val |= (field_val << div_off);
 698
 699                 __raw_writel(reg_val, reg);
 700                 clk->rate = clk->parent->rate / field_val;
 701
 702                 if (clk->flags & DELAYED_APP)
 703                         __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
 704                 ret = 0;
 705         } else if (clk->set_rate != 0)
 706                 ret = clk->set_rate(clk, rate);
 707
 708         if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
 709                 propagate_rate(clk);
 710
 711         return ret;
 712 }
 713
 714 /* Converts encoded control register address into a full address */
 715 static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
 716                                struct clk *src_clk, u32 *field_mask)
 717 {
 718         u32 val = ~0, src_reg_addr = 0, mask = 0;
 719
 720         /* Find target control register.*/
 721         switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
 722         case CM_CORE_SEL1:
 723                 src_reg_addr = (u32)&CM_CLKSEL1_CORE;
 724                 if (reg_offset == 13) {                 /* DSS2_fclk */
 725                         mask = 0x1;
 726                         if (src_clk == &sys_ck)
 727                                 val = 0;
 728                         if (src_clk == &func_48m_ck)
 729                                 val = 1;
 730                 } else if (reg_offset == 8) {           /* DSS1_fclk */
 731                         mask = 0x1f;
 732                         if (src_clk == &sys_ck)
 733                                 val = 0;
 734                         else if (src_clk == &core_ck)   /* divided clock */
 735                                 val = 0x10;             /* rate needs fixing */
 736                 } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
 737                         mask = 0x1F;
 738                         if(src_clk == &func_96m_ck)
 739                                 val = 0;
 740                         else if (src_clk == &core_ck)
 741                                 val = 0x10;
 742                 }
 743                 break;
 744         case CM_CORE_SEL2:
 745                 src_reg_addr = (u32)&CM_CLKSEL2_CORE;
 746                 mask = 0x3;
 747                 if (src_clk == &func_32k_ck)
 748                         val = 0x0;
 749                 if (src_clk == &sys_ck)
 750                         val = 0x1;
 751                 if (src_clk == &alt_ck)
 752                         val = 0x2;
 753                 break;
 754         case CM_WKUP_SEL1:
 755                 src_reg_addr = (u32)&CM_CLKSEL_WKUP;
 756                 mask = 0x3;
 757                 if (src_clk == &func_32k_ck)
 758                         val = 0x0;
 759                 if (src_clk == &sys_ck)
 760                         val = 0x1;
 761                 if (src_clk == &alt_ck)
 762                         val = 0x2;
 763                 break;
 764         case CM_PLL_SEL1:
 765                 src_reg_addr = (u32)&CM_CLKSEL1_PLL;
 766                 mask = 0x1;
 767                 if (reg_offset == 0x3) {
 768                         if (src_clk == &apll96_ck)
 769                                 val = 0;
 770                         if (src_clk == &alt_ck)
 771                                 val = 1;
 772                 }
 773                 else if (reg_offset == 0x5) {
 774                         if (src_clk == &apll54_ck)
 775                                 val = 0;
 776                         if (src_clk == &alt_ck)
 777                                 val = 1;
 778                 }
 779                 break;
 780         case CM_PLL_SEL2:
 781                 src_reg_addr = (u32)&CM_CLKSEL2_PLL;
 782                 mask = 0x3;
 783                 if (src_clk == &func_32k_ck)
 784                         val = 0x0;
 785                 if (src_clk == &dpll_ck)
 786                         val = 0x2;
 787                 break;
 788         case CM_SYSCLKOUT_SEL1:
 789                 src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
 790                 mask = 0x3;
 791                 if (src_clk == &dpll_ck)
 792                         val = 0;
 793                 if (src_clk == &sys_ck)
 794                         val = 1;
 795                 if (src_clk == &func_96m_ck)
 796                         val = 2;
 797                 if (src_clk == &func_54m_ck)
 798                         val = 3;
 799                 break;
 800         }
 801
 802         if (val == ~0)                  /* Catch errors in offset */
 803                 *type_to_addr = 0;
 804         else
 805                 *type_to_addr = src_reg_addr;
 806         *field_mask = mask;
 807
 808         return val;
 809 }
 810
 811 static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 812 {
 813         void __iomem * reg;
 814         u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
 815         int ret = -EINVAL;
 816
 817         if (unlikely(clk->flags & CONFIG_PARTICIPANT))
 818                 return ret;
 819
 820         if (clk->flags & SRC_SEL_MASK) {        /* On-chip SEL collection */
 821                 src_sel = (SRC_RATE_SEL_MASK & clk->flags);
 822                 src_off = clk->src_offset;
 823
 824                 if (src_sel == 0)
 825                         goto set_parent_error;
 826
 827                 field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
 828                                                 &field_mask);
 829
 830                 reg = (void __iomem *)src_sel;
 831
 832                 if (clk->usecount > 0)
 833                         _omap2_clk_disable(clk);
 834
 835                 /* Set new source value (previous dividers if any in effect) */
 836                 reg_val = __raw_readl(reg) & ~(field_mask << src_off);
 837                 reg_val |= (field_val << src_off);
 838                 __raw_writel(reg_val, reg);
 839
 840                 if (clk->flags & DELAYED_APP)
 841                         __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
 842
 843                 if (clk->usecount > 0)
 844                         _omap2_clk_enable(clk);
 845
 846                 clk->parent = new_parent;
 847
 848                 /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
 849                 if ((new_parent == &core_ck) && (clk == &dss1_fck))
 850                         clk->rate = new_parent->rate / 0x10;
 851                 else
 852                         clk->rate = new_parent->rate;
 853
 854                 if (unlikely(clk->flags & RATE_PROPAGATES))
 855                         propagate_rate(clk);
 856
 857                 return 0;
 858         } else {
 859                 clk->parent = new_parent;
 860                 rate = new_parent->rate;
 861                 omap2_clk_set_rate(clk, rate);
 862                 ret = 0;
 863         }
 864
 865  set_parent_error:
 866         return ret;
 867 }
 868
 869 /* Sets basic clocks based on the specified rate */
 870 static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
 871 {
 872         u32 flags, cur_rate, done_rate, bypass = 0;
 873         u8 cpu_mask = 0;
 874         struct prcm_config *prcm;
 875         unsigned long found_speed = 0;
 876
 877         if (clk != &virt_prcm_set)
 878                 return -EINVAL;
 879
 880         /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
 881         if (cpu_is_omap2420())
 882                 cpu_mask = RATE_IN_242X;
 883         else if (cpu_is_omap2430())
 884                 cpu_mask = RATE_IN_243X;
 885
 886         for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 887                 if (!(prcm->flags & cpu_mask))
 888                         continue;
 889
 890                 if (prcm->xtal_speed != sys_ck.rate)
 891                         continue;
 892
 893                 if (prcm->mpu_speed <= rate) {
 894                         found_speed = prcm->mpu_speed;
 895                         break;
 896                 }
 897         }
 898
 899         if (!found_speed) {
 900                 printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
 901          rate / 1000000);
 902                 return -EINVAL;
 903         }
 904
 905         curr_prcm_set = prcm;
 906         cur_rate = omap2_get_dpll_rate(&dpll_ck);
 907
 908         if (prcm->dpll_speed == cur_rate / 2) {
 909                 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
 910         } else if (prcm->dpll_speed == cur_rate * 2) {
 911                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
 912         } else if (prcm->dpll_speed != cur_rate) {
 913                 local_irq_save(flags);
 914
 915                 if (prcm->dpll_speed == prcm->xtal_speed)
 916                         bypass = 1;
 917
 918                 if ((prcm->cm_clksel2_pll & 0x3) == 2)
 919                         done_rate = PRCM_FULL_SPEED;
 920                 else
 921                         done_rate = PRCM_HALF_SPEED;
 922
 923                 /* MPU divider */
 924                 CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
 925
 926                 /* dsp + iva1 div(2420), iva2.1(2430) */
 927                 CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
 928
 929                 CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
 930
 931                 /* Major subsystem dividers */
 932                 CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
 933                 if (cpu_is_omap2430())
 934                         CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
 935
 936                 /* x2 to enter init_mem */
 937                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
 938
 939                 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
 940                                bypass);
 941
 942                 omap2_init_memory_params(omap2_dll_force_needed());
 943                 omap2_reprogram_sdrc(done_rate, 0);
 944
 945                 local_irq_restore(flags);
 946         }
 947         omap2_clksel_recalc(&dpll_ck);
 948
 949         return 0;
 950 }
 951
 952 /*-------------------------------------------------------------------------
 953  * Omap2 clock reset and init functions
 954  *-------------------------------------------------------------------------*/
 955
 956 static struct clk_functions omap2_clk_functions = {
 957         .clk_enable             = omap2_clk_enable,
 958         .clk_disable            = omap2_clk_disable,
 959         .clk_round_rate         = omap2_clk_round_rate,
 960         .clk_set_rate           = omap2_clk_set_rate,
 961         .clk_set_parent         = omap2_clk_set_parent,
 962 };
 963
 964 static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
 965 {
 966         u32 div, aplls, sclk = 13000000;
 967
 968         aplls = CM_CLKSEL1_PLL;
 969         aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
 970         aplls >>= 23;                   /* Isolate field, 0,2,3 */
 971
 972         if (aplls == 0)
 973                 sclk = 19200000;
 974         else if (aplls == 2)
 975                 sclk = 13000000;
 976         else if (aplls == 3)
 977                 sclk = 12000000;
 978
 979         div = PRCM_CLKSRC_CTRL;
 980         div &= ((1 << 7) | (1 << 6));
 981         div >>= sys->rate_offset;
 982
 983         osc->rate = sclk * div;
 984         sys->rate = sclk;
 985 }
 986
 987 #ifdef CONFIG_OMAP_RESET_CLOCKS
 988 static void __init omap2_disable_unused_clocks(void)
 989 {
 990         struct clk *ck;
 991         u32 regval32;
 992
 993         list_for_each_entry(ck, &clocks, node) {
 994                 if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
 995                         ck->enable_reg == 0)
 996                         continue;
 997
 998                 regval32 = __raw_readl(ck->enable_reg);
 999                 if ((regval32 & (1 << ck->enable_bit)) == 0)
1000                         continue;
1001
1002                 printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name);
1003                 _omap2_clk_disable(ck);
1004         }
1005 }
1006 late_initcall(omap2_disable_unused_clocks);
1007 #endif
1008
1009 /*
1010  * Switch the MPU rate if specified on cmdline.
1011  * We cannot do this early until cmdline is parsed.
1012  */
1013 static int __init omap2_clk_arch_init(void)
1014 {
1015         if (!mpurate)
1016                 return -EINVAL;
1017
1018         if (omap2_select_table_rate(&virt_prcm_set, mpurate))
1019                 printk(KERN_ERR "Could not find matching MPU rate\n");
1020
1021         propagate_rate(&osc_ck);                /* update main root fast */
1022         propagate_rate(&func_32k_ck);           /* update main root slow */
1023
1024         printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
1025                "%ld.%01ld/%ld/%ld MHz\n",
1026                (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
1027                (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
1028
1029         return 0;
1030 }
1031 arch_initcall(omap2_clk_arch_init);
1032
1033 int __init omap2_clk_init(void)
1034 {
1035         struct prcm_config *prcm;
1036         struct clk ** clkp;
1037         u32 clkrate;
1038
1039         clk_init(&omap2_clk_functions);
1040         omap2_get_crystal_rate(&osc_ck, &sys_ck);
1041
1042         for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
1043              clkp++) {
1044
1045                 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
1046                         clk_register(*clkp);
1047                         continue;
1048                 }
1049
1050                 if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
1051                         clk_register(*clkp);
1052                         continue;
1053                 }
1054         }
1055
1056         /* Check the MPU rate set by bootloader */
1057         clkrate = omap2_get_dpll_rate(&dpll_ck);
1058         for (prcm = rate_table; prcm->mpu_speed; prcm++) {
1059                 if (prcm->xtal_speed != sys_ck.rate)
1060                         continue;
1061                 if (prcm->dpll_speed <= clkrate)
1062                          break;
1063         }
1064         curr_prcm_set = prcm;
1065
1066         propagate_rate(&osc_ck);                /* update main root fast */
1067         propagate_rate(&func_32k_ck);           /* update main root slow */
1068
1069         printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
1070                "%ld.%01ld/%ld/%ld MHz\n",
1071                (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
1072                (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
1073
1074         /*
1075          * Only enable those clocks we will need, let the drivers
1076          * enable other clocks as necessary
1077          */
1078         clk_enable(&sync_32k_ick);
1079         clk_enable(&omapctrl_ick);
1080         if (cpu_is_omap2430())
1081                 clk_enable(&sdrc_ick);
1082
1083         return 0;
1084 }