Merge branch 'slab/next' into for-linus
[pandora-kernel.git] / arch / arm / mach-omap2 / board-zoom2.c
1 /*
2  * Copyright (C) 2009 Texas Instruments Inc.
3  * Mikkel Christensen <mlc@ti.com>
4  *
5  * Modified from mach-omap2/board-ldp.c
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/platform_device.h>
15 #include <linux/input.h>
16 #include <linux/gpio.h>
17 #include <linux/i2c/twl.h>
18
19 #include <asm/mach-types.h>
20 #include <asm/mach/arch.h>
21
22 #include <plat/common.h>
23 #include <plat/board.h>
24
25 #include <mach/board-zoom.h>
26
27 #include "board-flash.h"
28 #include "mux.h"
29 #include "sdram-micron-mt46h32m32lf-6.h"
30
31 static void __init omap_zoom2_init_irq(void)
32 {
33         omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
34                                  mt46h32m32lf6_sdrc_params);
35         omap_init_irq();
36         omap_gpio_init();
37 }
38
39 #ifdef CONFIG_OMAP_MUX
40 static struct omap_board_mux board_mux[] __initdata = {
41         /* WLAN IRQ - GPIO 162 */
42         OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
43         /* WLAN POWER ENABLE - GPIO 101 */
44         OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
45         /* WLAN SDIO: MMC3 CMD */
46         OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
47         /* WLAN SDIO: MMC3 CLK */
48         OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
49         /* WLAN SDIO: MMC3 DAT[0-3] */
50         OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
51         OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
52         OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
53         OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
54         { .reg_offset = OMAP_MUX_TERMINATOR },
55 };
56 #else
57 #define board_mux       NULL
58 #endif
59
60 static struct mtd_partition zoom_nand_partitions[] = {
61         /* All the partition sizes are listed in terms of NAND block size */
62         {
63                 .name           = "X-Loader-NAND",
64                 .offset         = 0,
65                 .size           = 4 * (64 * 2048),      /* 512KB, 0x80000 */
66                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
67         },
68         {
69                 .name           = "U-Boot-NAND",
70                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
71                 .size           = 10 * (64 * 2048),     /* 1.25MB, 0x140000 */
72                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
73         },
74         {
75                 .name           = "Boot Env-NAND",
76                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
77                 .size           = 2 * (64 * 2048),      /* 256KB, 0x40000 */
78         },
79         {
80                 .name           = "Kernel-NAND",
81                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x0200000*/
82                 .size           = 240 * (64 * 2048),    /* 30M, 0x1E00000 */
83         },
84         {
85                 .name           = "system",
86                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x2000000 */
87                 .size           = 3328 * (64 * 2048),   /* 416M, 0x1A000000 */
88         },
89         {
90                 .name           = "userdata",
91                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1C000000*/
92                 .size           = 256 * (64 * 2048),    /* 32M, 0x2000000 */
93         },
94         {
95                 .name           = "cache",
96                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1E000000*/
97                 .size           = 256 * (64 * 2048),    /* 32M, 0x2000000 */
98         },
99 };
100
101 static void __init omap_zoom2_init(void)
102 {
103         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
104         zoom_peripherals_init();
105         board_nand_init(zoom_nand_partitions,
106                         ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
107         zoom_debugboard_init();
108 }
109
110 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
111         .boot_params    = 0x80000100,
112         .map_io         = omap3_map_io,
113         .reserve        = omap_reserve,
114         .init_irq       = omap_zoom2_init_irq,
115         .init_machine   = omap_zoom2_init,
116         .timer          = &omap_timer,
117 MACHINE_END