2 * board-omap3pandora.c (Pandora Handheld Console)
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * version 2 as published by the Free Software Foundation.
8 * This program is distributed in the hope that it will be useful, but
9 * WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 * General Public License for more details.
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/platform_device.h>
24 #include <linux/spi/spi.h>
25 #include <linux/regulator/machine.h>
26 #include <linux/i2c/twl.h>
27 #include <linux/wl12xx.h>
28 #include <linux/mtd/partitions.h>
29 #include <linux/mtd/nand.h>
30 #include <linux/leds.h>
31 #include <linux/leds_pwm.h>
32 #include <linux/input.h>
33 #include <linux/input/matrix_keypad.h>
34 #include <linux/gpio.h>
35 #include <linux/gpio_keys.h>
36 #include <linux/mmc/host.h>
37 #include <linux/mmc/card.h>
38 #include <linux/regulator/fixed.h>
39 #include <linux/i2c/vsense.h>
40 #include <linux/dma-mapping.h>
41 #include <linux/dma-contiguous.h>
43 #include <asm/mach-types.h>
44 #include <asm/mach/arch.h>
45 #include <asm/mach/map.h>
47 #include <plat/board.h>
48 #include <plat/common.h>
49 #include <mach/hardware.h>
50 #include <plat/mcspi.h>
52 #include <video/omapdss.h>
53 #include <plat/nand.h>
56 #include "sdram-micron-mt46h32m32lf-6.h"
57 #include "sdram-micron-mt29c4g96mazapcjg-5.h"
59 #include "common-board-devices.h"
61 #define PANDORA_WIFI_IRQ_GPIO 21
62 #define PANDORA_WIFI_NRESET_GPIO 23
63 #define OMAP3_PANDORA_TS_GPIO 94
64 #define PANDORA_EN_USB_5V_GPIO 164
66 static struct mtd_partition omap3pandora_nand_partitions[] = {
70 .size = 4 * NAND_BLOCK_SIZE,
71 .mask_flags = MTD_WRITEABLE
74 .offset = MTDPART_OFS_APPEND,
75 .size = 15 * NAND_BLOCK_SIZE,
78 .offset = MTDPART_OFS_APPEND,
79 .size = 1 * NAND_BLOCK_SIZE,
82 .offset = MTDPART_OFS_APPEND,
83 .size = 80 * NAND_BLOCK_SIZE,
86 .offset = MTDPART_OFS_APPEND,
87 .size = MTDPART_SIZ_FULL,
91 static struct omap_nand_platform_data pandora_nand_data = {
93 .devsize = NAND_BUSWIDTH_16,
94 .xfer_type = NAND_OMAP_PREFETCH_DMA,
95 .parts = omap3pandora_nand_partitions,
96 .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
100 static struct gpio_led pandora_gpio_leds[] = {
102 .name = "pandora::sd1",
103 .default_trigger = "mmc0",
106 .name = "pandora::sd2",
107 .default_trigger = "mmc1",
110 .name = "pandora::bluetooth",
113 .name = "pandora::wifi",
118 static struct gpio_led_platform_data pandora_gpio_led_data = {
119 .leds = pandora_gpio_leds,
120 .num_leds = ARRAY_SIZE(pandora_gpio_leds),
123 static struct platform_device pandora_leds_gpio = {
127 .platform_data = &pandora_gpio_led_data,
131 static struct led_pwm pandora_pwm_leds[] = {
133 .name = "pandora::keypad_bl",
134 .pwm_id = 0, /* LEDA */
136 .name = "pandora::power",
137 .default_trigger = "default-on",
138 .pwm_id = 1, /* LEDB */
140 .name = "pandora::charger",
141 .default_trigger = "twl4030_bci-charging",
142 .pwm_id = 3, /* PWM1 */
146 static struct led_pwm_platform_data pandora_pwm_led_data = {
147 .leds = pandora_pwm_leds,
148 .num_leds = ARRAY_SIZE(pandora_pwm_leds),
151 static struct platform_device pandora_leds_pwm = {
152 .name = "leds-twl4030-pwm",
155 .platform_data = &pandora_pwm_led_data,
159 static struct platform_device pandora_bl = {
160 .name = "pandora-backlight",
164 #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
169 .active_low = act_low, \
170 .debounce_interval = 4, \
171 .desc = "btn " descr, \
174 #define GPIO_BUTTON_LOW(gpio_num, event_code, description) \
175 GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
177 static struct gpio_keys_button pandora_gpio_keys[] = {
178 GPIO_BUTTON_LOW(110, KEY_UP, "up"),
179 GPIO_BUTTON_LOW(103, KEY_DOWN, "down"),
180 GPIO_BUTTON_LOW(96, KEY_LEFT, "left"),
181 GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"),
182 GPIO_BUTTON_LOW(109, KEY_PAGEUP, "game 1"),
183 GPIO_BUTTON_LOW(111, KEY_END, "game 2"),
184 GPIO_BUTTON_LOW(106, KEY_PAGEDOWN, "game 3"),
185 GPIO_BUTTON_LOW(101, KEY_HOME, "game 4"),
186 GPIO_BUTTON_LOW(102, KEY_RIGHTSHIFT, "l"),
187 GPIO_BUTTON_LOW(97, KEY_KPPLUS, "l2"),
188 GPIO_BUTTON_LOW(105, KEY_RIGHTCTRL, "r"),
189 GPIO_BUTTON_LOW(107, KEY_KPMINUS, "r2"),
190 GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"),
191 GPIO_BUTTON_LOW(99, KEY_MENU, "menu"),
192 GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"),
193 GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
194 GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
197 static struct gpio_keys_platform_data pandora_gpio_key_info = {
198 .buttons = pandora_gpio_keys,
199 .nbuttons = ARRAY_SIZE(pandora_gpio_keys),
202 static struct platform_device pandora_keys_gpio = {
206 .platform_data = &pandora_gpio_key_info,
210 /* HACK: this requires patched twl4030_keypad driver */
211 #define FNKEY(row, col, code) KEY((row + 8), col, code)
213 static const uint32_t board_keymap[] = {
226 KEY(1, 5, KEY_SPACE),
227 KEY(2, 0, KEY_BACKSPACE),
253 KEY(7, 0, KEY_ENTER),
256 KEY(7, 3, KEY_LEFTSHIFT),
257 KEY(7, 4, KEY_COMMA),
261 FNKEY(0, 2, KEY_BRIGHTNESSUP),
262 FNKEY(0, 3, KEY_F13), /* apostrophe, differs from Fn-A? */
263 FNKEY(0, 4, KEY_F22),
264 FNKEY(0, 5, KEY_F23),
265 FNKEY(1, 0, KEY_F10),
267 FNKEY(1, 2, KEY_BRIGHTNESSDOWN),
268 FNKEY(1, 3, KEY_GRAVE),
269 FNKEY(1, 4, KEY_F14), /* pipe/bar */
270 FNKEY(1, 5, KEY_TAB),
271 FNKEY(2, 0, KEY_INSERT),
273 FNKEY(2, 2, KEY_F15), /* dash */
274 FNKEY(2, 3, KEY_EQUAL),
275 FNKEY(2, 4, KEY_F16), /* # (pound/hash) */
277 FNKEY(3, 0, KEY_F11),
279 FNKEY(3, 2, KEY_F17), /* ! */
280 FNKEY(3, 3, KEY_KPPLUS),
281 FNKEY(3, 4, KEY_BACKSLASH),
282 FNKEY(4, 0, KEY_F12),
284 FNKEY(4, 2, KEY_RIGHTBRACE),
285 FNKEY(4, 3, KEY_KPMINUS),
286 FNKEY(4, 4, KEY_QUESTION),
287 FNKEY(5, 0, KEY_F18), /* £ (pound) */
289 FNKEY(5, 2, KEY_LEFTBRACE),
290 FNKEY(5, 3, KEY_F19), /* " */
291 FNKEY(5, 4, KEY_SLASH),
292 FNKEY(6, 0, KEY_YEN),
294 FNKEY(6, 2, KEY_F20), /* @ */
295 FNKEY(6, 3, KEY_APOSTROPHE),
296 FNKEY(6, 4, KEY_F21), /* : */
297 FNKEY(7, 0, KEY_ENTER),
299 FNKEY(7, 2, KEY_ESC),
300 FNKEY(7, 3, KEY_CAPSLOCK),
301 FNKEY(7, 4, KEY_SEMICOLON),
304 static struct matrix_keymap_data board_map_data = {
305 .keymap = board_keymap,
306 .keymap_size = ARRAY_SIZE(board_keymap),
309 static struct twl4030_keypad_data pandora_kp_data = {
310 .keymap_data = &board_map_data,
316 static struct omap_dss_device pandora_lcd_device = {
318 .driver_name = "tpo_td043mtea1_panel",
319 .type = OMAP_DISPLAY_TYPE_DPI,
320 .phy.dpi.data_lines = 24,
324 static struct omap_dss_device pandora_tv_device = {
326 .driver_name = "venc",
327 .type = OMAP_DISPLAY_TYPE_VENC,
328 .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
331 static struct omap_dss_device *pandora_dss_devices[] = {
336 static struct omap_dss_board_info pandora_dss_data = {
337 .num_devices = ARRAY_SIZE(pandora_dss_devices),
338 .devices = pandora_dss_devices,
339 .default_device = &pandora_lcd_device,
342 static void pandora_wl1251_init_card(struct mmc_card *card)
345 * We have TI wl1251 attached to MMC3. Pass this information to
346 * SDIO core because it can't be probed by normal methods.
348 card->quirks |= MMC_QUIRK_NONSTD_SDIO;
349 card->cccr.wide_bus = 1;
350 card->cis.vendor = 0x104c;
351 card->cis.device = 0x9066;
352 card->cis.blksize = 512;
353 card->cis.max_dtr = 24000000;
356 static struct omap2_hsmmc_info omap3pandora_mmc[] = {
359 .caps = MMC_CAP_4_BIT_DATA,
367 .caps = MMC_CAP_4_BIT_DATA,
376 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
379 .init_card = pandora_wl1251_init_card,
384 static int omap3pandora_twl_gpio_setup(struct device *dev,
385 unsigned gpio, unsigned ngpio)
389 /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
390 omap3pandora_mmc[0].gpio_cd = gpio + 0;
391 omap3pandora_mmc[1].gpio_cd = gpio + 1;
392 omap2_hsmmc_init(omap3pandora_mmc);
394 /* gpio + 13 drives 32kHz buffer for wifi module */
395 gpio_32khz = gpio + 13;
396 ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
398 pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
405 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
406 .gpio_base = OMAP_MAX_GPIO_LINES,
407 .irq_base = TWL4030_GPIO_IRQ_BASE,
408 .irq_end = TWL4030_GPIO_IRQ_END,
409 .setup = omap3pandora_twl_gpio_setup,
412 static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
413 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
416 static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
417 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
420 static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
421 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
424 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
425 REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
426 REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
427 REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
430 static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
431 REGULATOR_SUPPLY("vcc", "display0"),
434 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
435 REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
438 /* ads7846 on SPI and 2 nub controllers on I2C */
439 static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
440 REGULATOR_SUPPLY("vcc", "spi1.0"),
441 REGULATOR_SUPPLY("vcc", "3-0066"),
442 REGULATOR_SUPPLY("vcc", "3-0067"),
445 static struct regulator_consumer_supply pandora_adac_supply[] = {
446 REGULATOR_SUPPLY("vcc", "soc-audio"),
447 REGULATOR_SUPPLY("lidsw", NULL),
450 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
451 static struct regulator_init_data pandora_vmmc1 = {
455 .valid_modes_mask = REGULATOR_MODE_NORMAL
456 | REGULATOR_MODE_STANDBY,
457 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
458 | REGULATOR_CHANGE_MODE
459 | REGULATOR_CHANGE_STATUS,
461 .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply),
462 .consumer_supplies = pandora_vmmc1_supply,
465 /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
466 static struct regulator_init_data pandora_vmmc2 = {
470 .valid_modes_mask = REGULATOR_MODE_NORMAL
471 | REGULATOR_MODE_STANDBY,
472 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
473 | REGULATOR_CHANGE_MODE
474 | REGULATOR_CHANGE_STATUS,
476 .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply),
477 .consumer_supplies = pandora_vmmc2_supply,
481 static struct regulator_init_data pandora_vaux1 = {
486 .valid_modes_mask = REGULATOR_MODE_NORMAL
487 | REGULATOR_MODE_STANDBY,
488 .valid_ops_mask = REGULATOR_CHANGE_MODE
489 | REGULATOR_CHANGE_STATUS,
491 .num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply),
492 .consumer_supplies = pandora_vcc_lcd_supply,
495 /* VAUX2 for USB host PHY */
496 static struct regulator_init_data pandora_vaux2 = {
501 .valid_modes_mask = REGULATOR_MODE_NORMAL
502 | REGULATOR_MODE_STANDBY,
503 .valid_ops_mask = REGULATOR_CHANGE_MODE
504 | REGULATOR_CHANGE_STATUS,
506 .num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply),
507 .consumer_supplies = pandora_usb_phy_supply,
510 /* VAUX4 for ads7846 and nubs */
511 static struct regulator_init_data pandora_vaux4 = {
516 .valid_modes_mask = REGULATOR_MODE_NORMAL
517 | REGULATOR_MODE_STANDBY,
518 .valid_ops_mask = REGULATOR_CHANGE_MODE
519 | REGULATOR_CHANGE_STATUS,
521 .num_consumer_supplies = ARRAY_SIZE(pandora_vaux4_supplies),
522 .consumer_supplies = pandora_vaux4_supplies,
525 /* VSIM for audio DAC */
526 static struct regulator_init_data pandora_vsim = {
531 .valid_modes_mask = REGULATOR_MODE_NORMAL
532 | REGULATOR_MODE_STANDBY,
533 .valid_ops_mask = REGULATOR_CHANGE_MODE
534 | REGULATOR_CHANGE_STATUS,
536 .num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply),
537 .consumer_supplies = pandora_adac_supply,
540 /* Fixed regulator internal to Wifi module */
541 static struct regulator_init_data pandora_vmmc3 = {
543 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
545 .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
546 .consumer_supplies = pandora_vmmc3_supply,
549 static struct fixed_voltage_config pandora_vwlan = {
550 .supply_name = "vwlan",
551 .microvolts = 1800000, /* 1.8V */
552 .gpio = PANDORA_WIFI_NRESET_GPIO,
553 .startup_delay = 50000, /* 50ms */
555 .enabled_at_boot = 0,
556 .init_data = &pandora_vmmc3,
559 static struct platform_device pandora_vwlan_device = {
560 .name = "reg-fixed-voltage",
563 .platform_data = &pandora_vwlan,
567 static char *pandora_power_supplied_to[] = {
571 static struct twl4030_bci_platform_data pandora_bci_data = {
572 .supplied_to = pandora_power_supplied_to,
573 .num_supplicants = ARRAY_SIZE(pandora_power_supplied_to),
576 static struct twl4030_ins sleep_on_seq[] = {
577 { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2 },
580 static struct twl4030_script sleep_on_script = {
581 .script = sleep_on_seq,
582 .size = ARRAY_SIZE(sleep_on_seq),
583 .flags = TWL4030_SLEEP_SCRIPT,
586 static struct twl4030_ins wakeup_p3_seq[] = {
587 { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2 },
590 static struct twl4030_script wakeup_p3_script = {
591 .script = wakeup_p3_seq,
592 .size = ARRAY_SIZE(wakeup_p3_seq),
593 .flags = TWL4030_WAKEUP3_SCRIPT,
596 static struct twl4030_script *twl4030_scripts[] = {
597 /* wakeup script should be loaded before sleep script, otherwise a
598 board might hit retention before loading of wakeup script is
599 completed. This can cause boot failures depending on timing issues.
605 static struct twl4030_resconfig twl4030_rconfig[] = {
607 .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
608 .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
613 static struct twl4030_power_data pandora_power_data = {
614 .scripts = twl4030_scripts,
615 .num = ARRAY_SIZE(twl4030_scripts),
616 .resource_config = twl4030_rconfig,
621 static struct twl4030_platform_data omap3pandora_twldata = {
622 .gpio = &omap3pandora_gpio_data,
623 .vmmc1 = &pandora_vmmc1,
624 .vmmc2 = &pandora_vmmc2,
625 .vaux1 = &pandora_vaux1,
626 .vaux2 = &pandora_vaux2,
627 .vaux4 = &pandora_vaux4,
628 .vsim = &pandora_vsim,
629 .keypad = &pandora_kp_data,
630 .bci = &pandora_bci_data,
631 .power = &pandora_power_data,
634 static struct vsense_platform_data omap3pandora_nub1_data = {
639 static struct vsense_platform_data omap3pandora_nub2_data = {
644 static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
646 I2C_BOARD_INFO("vsense", 0x66),
647 .flags = I2C_CLIENT_WAKE,
648 .platform_data = &omap3pandora_nub1_data,
650 I2C_BOARD_INFO("vsense", 0x67),
651 .flags = I2C_CLIENT_WAKE,
652 .platform_data = &omap3pandora_nub2_data,
654 I2C_BOARD_INFO("bq27500", 0x55),
655 .flags = I2C_CLIENT_WAKE,
659 static int __init omap3pandora_i2c_init(void)
661 omap3_pmic_get_config(&omap3pandora_twldata,
662 TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
663 TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
665 omap3pandora_twldata.vdac->constraints.apply_uV = true;
667 omap3pandora_twldata.vpll2->constraints.apply_uV = true;
668 omap3pandora_twldata.vpll2->num_consumer_supplies =
669 ARRAY_SIZE(pandora_vdds_supplies);
670 omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
672 omap3_pmic_init("tps65950", &omap3pandora_twldata);
673 /* i2c2 pins are not connected */
674 omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
675 ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
679 static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
681 .modalias = "tpo_td043mtea1_panel_spi",
684 .max_speed_hz = 375000,
685 .platform_data = &pandora_lcd_device,
689 static void __init pandora_wl1251_init(void)
691 struct wl12xx_platform_data pandora_wl1251_pdata;
694 memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
696 ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
700 pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
701 if (pandora_wl1251_pdata.irq < 0)
704 pandora_wl1251_pdata.use_eeprom = true;
705 ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
712 gpio_free(PANDORA_WIFI_IRQ_GPIO);
714 printk(KERN_ERR "wl1251 board initialisation failed\n");
717 static void __init pandora_usb_host_init(void)
721 ret = gpio_request_one(PANDORA_EN_USB_5V_GPIO, GPIOF_OUT_INIT_HIGH,
724 pr_err("Cannot set vbus GPIO, ret=%d\n", ret);
727 #include <linux/spi/ads7846.h>
728 #include <asm/system.h>
730 static DECLARE_COMPLETION(ts_completion);
731 static struct timespec ts_last_framedone;
732 static int pendown_state;
734 static void vsync_irq_wait_handler(void *data, u32 mask)
736 getnstimeofday(&ts_last_framedone);
738 /* reliable to read here */
739 pendown_state = !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
741 complete(&ts_completion);
744 static void ads7846_wait_for_sync(void)
746 struct timespec now, diff;
749 getnstimeofday(&now);
750 diff = timespec_sub(now, ts_last_framedone);
751 diff_us = diff.tv_nsec / NSEC_PER_USEC + diff.tv_sec * USEC_PER_SEC;
752 if (diff_us < 1023 || diff_us > 40000)
753 /* still blanking or display inactive */
756 /* wait for blanking period */
758 wait_for_completion_timeout(&ts_completion, HZ / 30);
762 static int pandora_pendown_state(void)
765 struct timespec now, diff;
770 /* This line is a noisy mess. It doesn't trigger spuriously, i.e.
771 * there is no signal when pen is up, but when it's down we have
772 * white noise of sorts. */
773 val = !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
774 pendown_state |= val;
776 if (in_irq() || in_atomic())
777 /* no time to fight noise.. */
778 return val | pendown_state;
781 getnstimeofday(&now);
782 diff = timespec_sub(now, ts_last_framedone);
783 diff_us = diff.tv_nsec / NSEC_PER_USEC + diff.tv_sec * USEC_PER_SEC;
786 /* assume pendown_state is up-to-date */
792 if (val != val_old) {
793 init_completion(&ts_completion);
796 ret = omap_dispc_register_isr(vsync_irq_wait_handler,
797 NULL, DISPC_IRQ_VSYNC);
799 ret = omap_dispc_unregister_isr(vsync_irq_wait_handler,
800 NULL, DISPC_IRQ_VSYNC);
803 pr_err("%s: can't (un)register isr: %d %d\n",
811 static struct ads7846_platform_data pandora_ads7846_cfg = {
819 .gpio_pendown = OMAP3_PANDORA_TS_GPIO,
821 .wait_for_sync = ads7846_wait_for_sync,
822 .get_pendown_state = pandora_pendown_state,
825 static struct platform_device pandora_ram_console = {
826 .name = "ram_console",
830 static struct platform_device pandora_c64_tools = {
833 .coherent_dma_mask = DMA_BIT_MASK(32),
837 static struct platform_device *omap3pandora_devices[] __initdata = {
842 &pandora_vwlan_device,
843 &pandora_ram_console,
847 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
849 .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
850 .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
851 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
854 .reset_gpio_port[0] = -EINVAL,
855 .reset_gpio_port[1] = 16,
856 .reset_gpio_port[2] = -EINVAL
859 #ifdef CONFIG_OMAP_MUX
860 static struct omap_board_mux board_mux[] __initdata = {
861 /* enable wakeup for pandora button (GPIO99) */
862 OMAP3_MUX(CAM_D0, OMAP_INPUT_EN | OMAP_WAKEUP_EN | OMAP_MUX_MODE4),
863 /* noisy unused signal from LCD cable */
864 OMAP3_MUX(CAM_VS, OMAP_INPUT_EN | OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_MUX_MODE7),
865 { .reg_offset = OMAP_MUX_TERMINATOR },
869 static struct regulator *lid_switch_power;
871 #ifdef CONFIG_PM_SLEEP
872 static int pandora_pm_suspend(struct device *dev)
874 if (!IS_ERR_OR_NULL(lid_switch_power))
875 regulator_disable(lid_switch_power);
880 static int pandora_pm_resume(struct device *dev)
882 if (!IS_ERR_OR_NULL(lid_switch_power))
883 regulator_enable(lid_switch_power);
889 static SIMPLE_DEV_PM_OPS(pandora_pm, pandora_pm_suspend, pandora_pm_resume);
891 static int __devinit pandora_pm_probe(struct platform_device *pdev)
893 lid_switch_power = regulator_get(NULL, "lidsw");
894 if (!IS_ERR(lid_switch_power))
895 regulator_enable(lid_switch_power);
900 static struct platform_driver pandora_pm_driver = {
901 .probe = pandora_pm_probe,
903 .name = "pandora-pm",
908 static struct platform_device pandora_pm_dev = {
909 .name = "pandora-pm",
913 static int __init pandora_pm_drv_reg(void)
915 platform_device_register(&pandora_pm_dev);
916 return platform_driver_register(&pandora_pm_driver);
918 late_initcall(pandora_pm_drv_reg);
920 static void __init omap3pandora_init(void)
922 struct omap_sdrc_params *sdrc_params;
924 omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
925 pandora_usb_host_init();
926 omap3pandora_i2c_init();
927 pandora_wl1251_init();
928 platform_add_devices(omap3pandora_devices,
929 ARRAY_SIZE(omap3pandora_devices));
930 omap_display_init(&pandora_dss_data);
933 sdrc_params = mt46h32m32lf6_sdrc_params;
934 if (cpu_is_omap3630() || omap_rev() >= OMAP3430_REV_ES3_0)
935 sdrc_params = mt29c4g96mazapcjg5_sdrc_params;
936 omap_sdrc_init(sdrc_params, sdrc_params);
938 spi_register_board_info(omap3pandora_spi_board_info,
939 ARRAY_SIZE(omap3pandora_spi_board_info));
940 omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 31, &pandora_ads7846_cfg);
941 usbhs_init(&usbhs_bdata);
943 gpmc_nand_init(&pandora_nand_data);
945 /* Ensure SDRC pins are mux'd for self-refresh */
946 omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
947 omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
950 /* HACK: create it here, so that others don't need to bother */
951 #ifdef CONFIG_PROC_FS
952 #include <linux/proc_fs.h>
954 static int __init proc_pandora_init(void)
956 struct proc_dir_entry *ret;
958 ret = proc_mkdir("pandora", NULL);
963 fs_initcall(proc_pandora_init);
967 #include <../drivers/staging/android/persistent_ram.h>
969 struct persistent_ram_descriptor ram_console_desc = {
970 .name = "ram_console",
974 struct persistent_ram ram_console_ram = {
978 .descs = &ram_console_desc,
981 void __init pandora_reserve(void)
984 dma_declare_contiguous(&pandora_c64_tools.dev, 4 * SZ_1M, 0x86000000, 0);
985 #ifdef CONFIG_ANDROID_PERSISTENT_RAM
986 persistent_ram_early_init(&ram_console_ram);
990 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
991 .atag_offset = 0x100,
992 .reserve = pandora_reserve,
993 .map_io = omap3_map_io,
994 .init_early = omap35xx_init_early,
995 .init_irq = omap3_init_irq,
996 .init_machine = omap3pandora_init,
997 .timer = &omap3_timer,