arch/arm/mach-omap1/leds-h2p2-debug.c

   1 /*
   2  * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
   3  *
   4  * Copyright 2003 by Texas Instruments Incorporated
   5  *
   6  * There are 16 LEDs on the debug board (all green); four may be used
   7  * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
   8  *
   9  * The "surfer" expansion board and H2 sample board also have two-color
  10  * green+red LEDs (in parallel), used here for timer and idle indicators.
  11  */
  12 #include <linux/gpio.h>
  13 #include <linux/init.h>
  14 #include <linux/kernel_stat.h>
  15 #include <linux/sched.h>
  16 #include <linux/io.h>
  17
  18 #include <mach/hardware.h>
  19 #include <asm/leds.h>
  20 #include <asm/system.h>
  21 #include <asm/mach-types.h>
  22
  23 #include <plat/fpga.h>
  24
  25 #include "leds.h"
  26
  27
  28 #define GPIO_LED_RED            3
  29 #define GPIO_LED_GREEN          OMAP_MPUIO(4)
  30
  31
  32 #define LED_STATE_ENABLED       0x01
  33 #define LED_STATE_CLAIMED       0x02
  34 #define LED_TIMER_ON            0x04
  35
  36 #define GPIO_IDLE               GPIO_LED_GREEN
  37 #define GPIO_TIMER              GPIO_LED_RED
  38
  39
  40 void h2p2_dbg_leds_event(led_event_t evt)
  41 {
  42         unsigned long flags;
  43
  44         static struct h2p2_dbg_fpga __iomem *fpga;
  45         static u16 led_state, hw_led_state;
  46
  47         local_irq_save(flags);
  48
  49         if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
  50                 goto done;
  51
  52         switch (evt) {
  53         case led_start:
  54                 if (!fpga)
  55                         fpga = ioremap(H2P2_DBG_FPGA_START,
  56                                                 H2P2_DBG_FPGA_SIZE);
  57                 if (fpga) {
  58                         led_state |= LED_STATE_ENABLED;
  59                         __raw_writew(~0, &fpga->leds);
  60                 }
  61                 break;
  62
  63         case led_stop:
  64         case led_halted:
  65                 /* all leds off during suspend or shutdown */
  66
  67                 if (! machine_is_omap_perseus2()) {
  68                         gpio_set_value(GPIO_TIMER, 0);
  69                         gpio_set_value(GPIO_IDLE, 0);
  70                 }
  71
  72                 __raw_writew(~0, &fpga->leds);
  73                 led_state &= ~LED_STATE_ENABLED;
  74                 if (evt == led_halted) {
  75                         iounmap(fpga);
  76                         fpga = NULL;
  77                 }
  78
  79                 goto done;
  80
  81         case led_claim:
  82                 led_state |= LED_STATE_CLAIMED;
  83                 hw_led_state = 0;
  84                 break;
  85
  86         case led_release:
  87                 led_state &= ~LED_STATE_CLAIMED;
  88                 break;
  89
  90 #ifdef CONFIG_LEDS_TIMER
  91         case led_timer:
  92                 led_state ^= LED_TIMER_ON;
  93
  94                 if (machine_is_omap_perseus2())
  95                         hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
  96                 else {
  97                         gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
  98                         goto done;
  99                 }
 100
 101                 break;
 102 #endif
 103
 104 #ifdef CONFIG_LEDS_CPU
 105         case led_idle_start:
 106                 if (machine_is_omap_perseus2())
 107                         hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
 108                 else {
 109                         gpio_set_value(GPIO_IDLE, 1);
 110                         goto done;
 111                 }
 112
 113                 break;
 114
 115         case led_idle_end:
 116                 if (machine_is_omap_perseus2())
 117                         hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
 118                 else {
 119                         gpio_set_value(GPIO_IDLE, 0);
 120                         goto done;
 121                 }
 122
 123                 break;
 124 #endif
 125
 126         case led_green_on:
 127                 hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
 128                 break;
 129         case led_green_off:
 130                 hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
 131                 break;
 132
 133         case led_amber_on:
 134                 hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
 135                 break;
 136         case led_amber_off:
 137                 hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
 138                 break;
 139
 140         case led_red_on:
 141                 hw_led_state |= H2P2_DBG_FPGA_LED_RED;
 142                 break;
 143         case led_red_off:
 144                 hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
 145                 break;
 146
 147         case led_blue_on:
 148                 hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
 149                 break;
 150         case led_blue_off:
 151                 hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
 152                 break;
 153
 154         default:
 155                 break;
 156         }
 157
 158
 159         /*
 160          *  Actually burn the LEDs
 161          */
 162         if (led_state & LED_STATE_ENABLED)
 163                 __raw_writew(~hw_led_state, &fpga->leds);
 164
 165 done:
 166         local_irq_restore(flags);
 167 }