arch/arm/mach-omap1/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15 #include <linux/gpio.h>
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <mach/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <plat/mux.h>
  26 #include <plat/usb.h>
  27 #include <plat/board.h>
  28 #include <plat/common.h>
  29
  30 static void __init omap_generic_init_irq(void)
  31 {
  32         omap1_init_common_hw();
  33         omap1_init_irq();
  34 }
  35
  36 /* assume no Mini-AB port */
  37
  38 #ifdef CONFIG_ARCH_OMAP15XX
  39 static struct omap_usb_config generic1510_usb_config __initdata = {
  40         .register_host  = 1,
  41         .register_dev   = 1,
  42         .hmc_mode       = 16,
  43         .pins[0]        = 3,
  44 };
  45 #endif
  46
  47 #if defined(CONFIG_ARCH_OMAP16XX)
  48 static struct omap_usb_config generic1610_usb_config __initdata = {
  49 #ifdef CONFIG_USB_OTG
  50         .otg            = 1,
  51 #endif
  52         .register_host  = 1,
  53         .register_dev   = 1,
  54         .hmc_mode       = 16,
  55         .pins[0]        = 6,
  56 };
  57 #endif
  58
  59 static struct omap_board_config_kernel generic_config[] __initdata = {
  60 };
  61
  62 static void __init omap_generic_init(void)
  63 {
  64 #ifdef CONFIG_ARCH_OMAP15XX
  65         if (cpu_is_omap15xx()) {
  66                 /* mux pins for uarts */
  67                 omap_cfg_reg(UART1_TX);
  68                 omap_cfg_reg(UART1_RTS);
  69                 omap_cfg_reg(UART2_TX);
  70                 omap_cfg_reg(UART2_RTS);
  71                 omap_cfg_reg(UART3_TX);
  72                 omap_cfg_reg(UART3_RX);
  73
  74                 omap1_usb_init(&generic1510_usb_config);
  75         }
  76 #endif
  77 #if defined(CONFIG_ARCH_OMAP16XX)
  78         if (!cpu_is_omap1510()) {
  79                 omap1_usb_init(&generic1610_usb_config);
  80         }
  81 #endif
  82
  83         omap_board_config = generic_config;
  84         omap_board_config_size = ARRAY_SIZE(generic_config);
  85         omap_serial_init();
  86         omap_register_i2c_bus(1, 100, NULL, 0);
  87 }
  88
  89 static void __init omap_generic_map_io(void)
  90 {
  91         omap1_map_common_io();
  92 }
  93
  94 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
  95         /* Maintainer: Tony Lindgren <tony@atomide.com> */
  96         .boot_params    = 0x10000100,
  97         .map_io         = omap_generic_map_io,
  98         .reserve        = omap_reserve,
  99         .init_irq       = omap_generic_init_irq,
 100         .init_machine   = omap_generic_init,
 101         .timer          = &omap1_timer,
 102 MACHINE_END