arch/arm/mach-mx3/mach-mx31ads.c

   1 /*
   2  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   3  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
   4  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16
  17 #include <linux/types.h>
  18 #include <linux/init.h>
  19 #include <linux/clk.h>
  20 #include <linux/serial_8250.h>
  21 #include <linux/gpio.h>
  22 #include <linux/i2c.h>
  23 #include <linux/irq.h>
  24
  25 #include <asm/mach-types.h>
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/time.h>
  28 #include <asm/memory.h>
  29 #include <asm/mach/map.h>
  30 #include <mach/common.h>
  31 #include <mach/board-mx31ads.h>
  32 #include <mach/iomux-mx3.h>
  33
  34 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
  35 #include <linux/mfd/wm8350/audio.h>
  36 #include <linux/mfd/wm8350/core.h>
  37 #include <linux/mfd/wm8350/pmic.h>
  38 #endif
  39
  40 #include "devices-imx31.h"
  41 #include "devices.h"
  42
  43 /* PBC Board interrupt status register */
  44 #define PBC_INTSTATUS           0x000016
  45
  46 /* PBC Board interrupt current status register */
  47 #define PBC_INTCURR_STATUS      0x000018
  48
  49 /* PBC Interrupt mask register set address */
  50 #define PBC_INTMASK_SET         0x00001A
  51
  52 /* PBC Interrupt mask register clear address */
  53 #define PBC_INTMASK_CLEAR       0x00001C
  54
  55 /* External UART A */
  56 #define PBC_SC16C652_UARTA      0x010000
  57
  58 /* External UART B */
  59 #define PBC_SC16C652_UARTB      0x010010
  60
  61 #define PBC_INTSTATUS_REG       (PBC_INTSTATUS + PBC_BASE_ADDRESS)
  62 #define PBC_INTMASK_SET_REG     (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
  63 #define PBC_INTMASK_CLEAR_REG   (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
  64 #define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
  65
  66 #define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
  67
  68 #define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
  69 #define EXPIO_INT_XUART_INTB    (MXC_EXP_IO_BASE + 11)
  70
  71 #define MXC_MAX_EXP_IO_LINES    16
  72
  73 /*
  74  * The serial port definition structure.
  75  */
  76 static struct plat_serial8250_port serial_platform_data[] = {
  77         {
  78                 .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
  79                 .mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
  80                 .irq      = EXPIO_INT_XUART_INTA,
  81                 .uartclk  = 14745600,
  82                 .regshift = 0,
  83                 .iotype   = UPIO_MEM,
  84                 .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
  85         }, {
  86                 .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
  87                 .mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
  88                 .irq      = EXPIO_INT_XUART_INTB,
  89                 .uartclk  = 14745600,
  90                 .regshift = 0,
  91                 .iotype   = UPIO_MEM,
  92                 .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
  93         },
  94         {},
  95 };
  96
  97 static struct platform_device serial_device = {
  98         .name   = "serial8250",
  99         .id     = 0,
 100         .dev    = {
 101                 .platform_data = serial_platform_data,
 102         },
 103 };
 104
 105 static int __init mxc_init_extuart(void)
 106 {
 107         return platform_device_register(&serial_device);
 108 }
 109
 110 static const struct imxuart_platform_data uart_pdata __initconst = {
 111         .flags = IMXUART_HAVE_RTSCTS,
 112 };
 113
 114 static unsigned int uart_pins[] = {
 115         MX31_PIN_CTS1__CTS1,
 116         MX31_PIN_RTS1__RTS1,
 117         MX31_PIN_TXD1__TXD1,
 118         MX31_PIN_RXD1__RXD1
 119 };
 120
 121 static inline void mxc_init_imx_uart(void)
 122 {
 123         mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 124         imx31_add_imx_uart0(&uart_pdata);
 125 }
 126
 127 static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
 128 {
 129         u32 imr_val;
 130         u32 int_valid;
 131         u32 expio_irq;
 132
 133         imr_val = __raw_readw(PBC_INTMASK_SET_REG);
 134         int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
 135
 136         expio_irq = MXC_EXP_IO_BASE;
 137         for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
 138                 if ((int_valid & 1) == 0)
 139                         continue;
 140
 141                 generic_handle_irq(expio_irq);
 142         }
 143 }
 144
 145 /*
 146  * Disable an expio pin's interrupt by setting the bit in the imr.
 147  * @param d     an expio virtual irq description
 148  */
 149 static void expio_mask_irq(struct irq_data *d)
 150 {
 151         u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
 152         /* mask the interrupt */
 153         __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
 154         __raw_readw(PBC_INTMASK_CLEAR_REG);
 155 }
 156
 157 /*
 158  * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
 159  * @param d     an expio virtual irq description
 160  */
 161 static void expio_ack_irq(struct irq_data *d)
 162 {
 163         u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
 164         /* clear the interrupt status */
 165         __raw_writew(1 << expio, PBC_INTSTATUS_REG);
 166 }
 167
 168 /*
 169  * Enable a expio pin's interrupt by clearing the bit in the imr.
 170  * @param d     an expio virtual irq description
 171  */
 172 static void expio_unmask_irq(struct irq_data *d)
 173 {
 174         u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
 175         /* unmask the interrupt */
 176         __raw_writew(1 << expio, PBC_INTMASK_SET_REG);
 177 }
 178
 179 static struct irq_chip expio_irq_chip = {
 180         .name = "EXPIO(CPLD)",
 181         .irq_ack = expio_ack_irq,
 182         .irq_mask = expio_mask_irq,
 183         .irq_unmask = expio_unmask_irq,
 184 };
 185
 186 static void __init mx31ads_init_expio(void)
 187 {
 188         int i;
 189
 190         printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
 191
 192         /*
 193          * Configure INT line as GPIO input
 194          */
 195         mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 196
 197         /* disable the interrupt and clear the status */
 198         __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
 199         __raw_writew(0xFFFF, PBC_INTSTATUS_REG);
 200         for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
 201              i++) {
 202                 set_irq_chip(i, &expio_irq_chip);
 203                 set_irq_handler(i, handle_level_irq);
 204                 set_irq_flags(i, IRQF_VALID);
 205         }
 206         set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
 207         set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
 208 }
 209
 210 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
 211 /* This section defines setup for the Wolfson Microelectronics
 212  * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
 213  * regulator definitions may be shared with them, but for now they can
 214  * only be used with this board so would generate warnings about
 215  * unused statics and some of the configuration is specific to this
 216  * module.
 217  */
 218
 219 /* CPU */
 220 static struct regulator_consumer_supply sw1a_consumers[] = {
 221         {
 222                 .supply = "cpu_vcc",
 223         }
 224 };
 225
 226 static struct regulator_init_data sw1a_data = {
 227         .constraints = {
 228                 .name = "SW1A",
 229                 .min_uV = 1275000,
 230                 .max_uV = 1600000,
 231                 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 232                                   REGULATOR_CHANGE_MODE,
 233                 .valid_modes_mask = REGULATOR_MODE_NORMAL |
 234                                     REGULATOR_MODE_FAST,
 235                 .state_mem = {
 236                          .uV = 1400000,
 237                          .mode = REGULATOR_MODE_NORMAL,
 238                          .enabled = 1,
 239                  },
 240                 .initial_state = PM_SUSPEND_MEM,
 241                 .always_on = 1,
 242                 .boot_on = 1,
 243         },
 244         .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
 245         .consumer_supplies = sw1a_consumers,
 246 };
 247
 248 /* System IO - High */
 249 static struct regulator_init_data viohi_data = {
 250         .constraints = {
 251                 .name = "VIOHO",
 252                 .min_uV = 2800000,
 253                 .max_uV = 2800000,
 254                 .state_mem = {
 255                          .uV = 2800000,
 256                          .mode = REGULATOR_MODE_NORMAL,
 257                          .enabled = 1,
 258                  },
 259                 .initial_state = PM_SUSPEND_MEM,
 260                 .always_on = 1,
 261                 .boot_on = 1,
 262         },
 263 };
 264
 265 /* System IO - Low */
 266 static struct regulator_init_data violo_data = {
 267         .constraints = {
 268                 .name = "VIOLO",
 269                 .min_uV = 1800000,
 270                 .max_uV = 1800000,
 271                 .state_mem = {
 272                          .uV = 1800000,
 273                          .mode = REGULATOR_MODE_NORMAL,
 274                          .enabled = 1,
 275                  },
 276                 .initial_state = PM_SUSPEND_MEM,
 277                 .always_on = 1,
 278                 .boot_on = 1,
 279         },
 280 };
 281
 282 /* DDR RAM */
 283 static struct regulator_init_data sw2a_data = {
 284         .constraints = {
 285                 .name = "SW2A",
 286                 .min_uV = 1800000,
 287                 .max_uV = 1800000,
 288                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 289                 .state_mem = {
 290                          .uV = 1800000,
 291                          .mode = REGULATOR_MODE_NORMAL,
 292                          .enabled = 1,
 293                  },
 294                 .state_disk = {
 295                          .mode = REGULATOR_MODE_NORMAL,
 296                          .enabled = 0,
 297                  },
 298                 .always_on = 1,
 299                 .boot_on = 1,
 300                 .initial_state = PM_SUSPEND_MEM,
 301         },
 302 };
 303
 304 static struct regulator_init_data ldo1_data = {
 305         .constraints = {
 306                 .name = "VCAM/VMMC1/VMMC2",
 307                 .min_uV = 2800000,
 308                 .max_uV = 2800000,
 309                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 310                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
 311                 .apply_uV = 1,
 312         },
 313 };
 314
 315 static struct regulator_consumer_supply ldo2_consumers[] = {
 316         { .supply = "AVDD", .dev_name = "1-001a" },
 317         { .supply = "HPVDD", .dev_name = "1-001a" },
 318 };
 319
 320 /* CODEC and SIM */
 321 static struct regulator_init_data ldo2_data = {
 322         .constraints = {
 323                 .name = "VESIM/VSIM/AVDD",
 324                 .min_uV = 3300000,
 325                 .max_uV = 3300000,
 326                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 327                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
 328                 .apply_uV = 1,
 329         },
 330         .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
 331         .consumer_supplies = ldo2_consumers,
 332 };
 333
 334 /* General */
 335 static struct regulator_init_data vdig_data = {
 336         .constraints = {
 337                 .name = "VDIG",
 338                 .min_uV = 1500000,
 339                 .max_uV = 1500000,
 340                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 341                 .apply_uV = 1,
 342                 .always_on = 1,
 343                 .boot_on = 1,
 344         },
 345 };
 346
 347 /* Tranceivers */
 348 static struct regulator_init_data ldo4_data = {
 349         .constraints = {
 350                 .name = "VRF1/CVDD_2.775",
 351                 .min_uV = 2500000,
 352                 .max_uV = 2500000,
 353                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
 354                 .apply_uV = 1,
 355                 .always_on = 1,
 356                 .boot_on = 1,
 357         },
 358 };
 359
 360 static struct wm8350_led_platform_data wm8350_led_data = {
 361         .name            = "wm8350:white",
 362         .default_trigger = "heartbeat",
 363         .max_uA          = 27899,
 364 };
 365
 366 static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
 367         .vmid_discharge_msecs = 1000,
 368         .drain_msecs = 30,
 369         .cap_discharge_msecs = 700,
 370         .vmid_charge_msecs = 700,
 371         .vmid_s_curve = WM8350_S_CURVE_SLOW,
 372         .dis_out4 = WM8350_DISCHARGE_SLOW,
 373         .dis_out3 = WM8350_DISCHARGE_SLOW,
 374         .dis_out2 = WM8350_DISCHARGE_SLOW,
 375         .dis_out1 = WM8350_DISCHARGE_SLOW,
 376         .vroi_out4 = WM8350_TIE_OFF_500R,
 377         .vroi_out3 = WM8350_TIE_OFF_500R,
 378         .vroi_out2 = WM8350_TIE_OFF_500R,
 379         .vroi_out1 = WM8350_TIE_OFF_500R,
 380         .vroi_enable = 0,
 381         .codec_current_on = WM8350_CODEC_ISEL_1_0,
 382         .codec_current_standby = WM8350_CODEC_ISEL_0_5,
 383         .codec_current_charge = WM8350_CODEC_ISEL_1_5,
 384 };
 385
 386 static int mx31_wm8350_init(struct wm8350 *wm8350)
 387 {
 388         wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
 389                            WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
 390                            WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
 391                            WM8350_GPIO_DEBOUNCE_ON);
 392
 393         wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
 394                            WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
 395                            WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
 396                            WM8350_GPIO_DEBOUNCE_ON);
 397
 398         wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
 399                            WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
 400                            WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
 401                            WM8350_GPIO_DEBOUNCE_OFF);
 402
 403         wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
 404                            WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
 405                            WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
 406                            WM8350_GPIO_DEBOUNCE_OFF);
 407
 408         wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
 409                            WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
 410                            WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 411                            WM8350_GPIO_DEBOUNCE_OFF);
 412
 413         wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
 414                            WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
 415                            WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 416                            WM8350_GPIO_DEBOUNCE_OFF);
 417
 418         wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
 419                            WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
 420                            WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 421                            WM8350_GPIO_DEBOUNCE_OFF);
 422
 423         wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
 424         wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
 425         wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
 426         wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
 427         wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
 428         wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
 429         wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
 430         wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
 431
 432         /* LEDs */
 433         wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
 434                              WM8350_DC5_ERRACT_SHUTDOWN_CONV);
 435         wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
 436                                WM8350_ISINK_FLASH_DISABLE,
 437                                WM8350_ISINK_FLASH_TRIG_BIT,
 438                                WM8350_ISINK_FLASH_DUR_32MS,
 439                                WM8350_ISINK_FLASH_ON_INSTANT,
 440                                WM8350_ISINK_FLASH_OFF_INSTANT,
 441                                WM8350_ISINK_FLASH_MODE_EN);
 442         wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
 443                                WM8350_ISINK_MODE_BOOST,
 444                                WM8350_ISINK_ILIM_NORMAL,
 445                                WM8350_DC5_RMP_20V,
 446                                WM8350_DC5_FBSRC_ISINKA);
 447         wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
 448                             &wm8350_led_data);
 449
 450         wm8350->codec.platform_data = &imx32ads_wm8350_setup;
 451
 452         regulator_has_full_constraints();
 453
 454         return 0;
 455 }
 456
 457 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 458         .init = mx31_wm8350_init,
 459         .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 460 };
 461 #endif
 462
 463 static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 464 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
 465         {
 466                 I2C_BOARD_INFO("wm8350", 0x1a),
 467                 .platform_data = &mx31_wm8350_pdata,
 468                 .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
 469         },
 470 #endif
 471 };
 472
 473 static void mxc_init_i2c(void)
 474 {
 475         i2c_register_board_info(1, mx31ads_i2c1_devices,
 476                                 ARRAY_SIZE(mx31ads_i2c1_devices));
 477
 478         mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
 479         mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
 480
 481         imx31_add_imx_i2c1(NULL);
 482 }
 483
 484 static unsigned int ssi_pins[] = {
 485         MX31_PIN_SFS5__SFS5,
 486         MX31_PIN_SCK5__SCK5,
 487         MX31_PIN_SRXD5__SRXD5,
 488         MX31_PIN_STXD5__STXD5,
 489 };
 490
 491 static void mxc_init_audio(void)
 492 {
 493         imx31_add_imx_ssi(0, NULL);
 494         mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 495 }
 496
 497 /* static mappings */
 498 static struct map_desc mx31ads_io_desc[] __initdata = {
 499         {
 500                 .virtual        = MX31_CS4_BASE_ADDR_VIRT,
 501                 .pfn            = __phys_to_pfn(MX31_CS4_BASE_ADDR),
 502                 .length         = MX31_CS4_SIZE / 2,
 503                 .type           = MT_DEVICE
 504         },
 505 };
 506
 507 static void __init mx31ads_map_io(void)
 508 {
 509         mx31_map_io();
 510         iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 511 }
 512
 513 static void __init mx31ads_init_irq(void)
 514 {
 515         mx31_init_irq();
 516         mx31ads_init_expio();
 517 }
 518
 519 static void __init mx31ads_init(void)
 520 {
 521         mxc_init_extuart();
 522         mxc_init_imx_uart();
 523         mxc_init_i2c();
 524         mxc_init_audio();
 525 }
 526
 527 static void __init mx31ads_timer_init(void)
 528 {
 529         mx31_clocks_init(26000000);
 530 }
 531
 532 static struct sys_timer mx31ads_timer = {
 533         .init   = mx31ads_timer_init,
 534 };
 535
 536 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 537         /* Maintainer: Freescale Semiconductor, Inc. */
 538         .boot_params = MX3x_PHYS_OFFSET + 0x100,
 539         .map_io = mx31ads_map_io,
 540         .init_early = imx31_init_early,
 541         .init_irq = mx31ads_init_irq,
 542         .timer = &mx31ads_timer,
 543         .init_machine = mx31ads_init,
 544 MACHINE_END