arch/arm/mach-mx2/pcm038.c

   1 /*
   2  * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
   3  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License
   7  * as published by the Free Software Foundation; either version 2
   8  * of the License, or (at your option) any later version.
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  17  * MA 02110-1301, USA.
  18  */
  19
  20 #include <linux/platform_device.h>
  21 #include <linux/mtd/physmap.h>
  22 #include <linux/mtd/plat-ram.h>
  23 #include <asm/mach/arch.h>
  24 #include <asm/mach-types.h>
  25 #include <mach/common.h>
  26 #include <mach/hardware.h>
  27 #include <mach/iomux-mx1-mx2.h>
  28 #include <asm/mach/time.h>
  29 #include <mach/imx-uart.h>
  30 #include <mach/board-pcm038.h>
  31 #include <mach/mxc_nand.h>
  32
  33 #include "devices.h"
  34
  35 /*
  36  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  37  * 16 bit width
  38  */
  39
  40 static struct platdata_mtd_ram pcm038_sram_data = {
  41         .bankwidth = 2,
  42 };
  43
  44 static struct resource pcm038_sram_resource = {
  45         .start = CS1_BASE_ADDR,
  46         .end   = CS1_BASE_ADDR + 512 * 1024 - 1,
  47         .flags = IORESOURCE_MEM,
  48 };
  49
  50 static struct platform_device pcm038_sram_mtd_device = {
  51         .name = "mtd-ram",
  52         .id = 0,
  53         .dev = {
  54                 .platform_data = &pcm038_sram_data,
  55         },
  56         .num_resources = 1,
  57         .resource = &pcm038_sram_resource,
  58 };
  59
  60 /*
  61  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
  62  * 16 bit width
  63  */
  64 static struct physmap_flash_data pcm038_flash_data = {
  65         .width = 2,
  66 };
  67
  68 static struct resource pcm038_flash_resource = {
  69         .start = 0xc0000000,
  70         .end   = 0xc1ffffff,
  71         .flags = IORESOURCE_MEM,
  72 };
  73
  74 static struct platform_device pcm038_nor_mtd_device = {
  75         .name = "physmap-flash",
  76         .id = 0,
  77         .dev = {
  78                 .platform_data = &pcm038_flash_data,
  79         },
  80         .num_resources = 1,
  81         .resource = &pcm038_flash_resource,
  82 };
  83
  84 static int mxc_uart0_pins[] = {
  85         PE12_PF_UART1_TXD,
  86         PE13_PF_UART1_RXD,
  87         PE14_PF_UART1_CTS,
  88         PE15_PF_UART1_RTS
  89 };
  90
  91 static int uart_mxc_port0_init(struct platform_device *pdev)
  92 {
  93         return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
  94                         ARRAY_SIZE(mxc_uart0_pins), "UART0");
  95 }
  96
  97 static int uart_mxc_port0_exit(struct platform_device *pdev)
  98 {
  99         mxc_gpio_release_multiple_pins(mxc_uart0_pins,
 100                         ARRAY_SIZE(mxc_uart0_pins));
 101         return 0;
 102 }
 103
 104 static int mxc_uart1_pins[] = {
 105         PE3_PF_UART2_CTS,
 106         PE4_PF_UART2_RTS,
 107         PE6_PF_UART2_TXD,
 108         PE7_PF_UART2_RXD
 109 };
 110
 111 static int uart_mxc_port1_init(struct platform_device *pdev)
 112 {
 113         return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
 114                         ARRAY_SIZE(mxc_uart1_pins), "UART1");
 115 }
 116
 117 static int uart_mxc_port1_exit(struct platform_device *pdev)
 118 {
 119         mxc_gpio_release_multiple_pins(mxc_uart1_pins,
 120                         ARRAY_SIZE(mxc_uart1_pins));
 121         return 0;
 122 }
 123
 124 static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
 125                                 PE9_PF_UART3_RXD,
 126                                 PE10_PF_UART3_CTS,
 127                                 PE9_PF_UART3_RXD };
 128
 129 static int uart_mxc_port2_init(struct platform_device *pdev)
 130 {
 131         return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
 132                         ARRAY_SIZE(mxc_uart2_pins), "UART2");
 133 }
 134
 135 static int uart_mxc_port2_exit(struct platform_device *pdev)
 136 {
 137         mxc_gpio_release_multiple_pins(mxc_uart2_pins,
 138                         ARRAY_SIZE(mxc_uart2_pins));
 139         return 0;
 140 }
 141
 142 static struct imxuart_platform_data uart_pdata[] = {
 143         {
 144                 .init = uart_mxc_port0_init,
 145                 .exit = uart_mxc_port0_exit,
 146                 .flags = IMXUART_HAVE_RTSCTS,
 147         }, {
 148                 .init = uart_mxc_port1_init,
 149                 .exit = uart_mxc_port1_exit,
 150                 .flags = IMXUART_HAVE_RTSCTS,
 151         }, {
 152                 .init = uart_mxc_port2_init,
 153                 .exit = uart_mxc_port2_exit,
 154                 .flags = IMXUART_HAVE_RTSCTS,
 155         },
 156 };
 157
 158 static int mxc_fec_pins[] = {
 159         PD0_AIN_FEC_TXD0,
 160         PD1_AIN_FEC_TXD1,
 161         PD2_AIN_FEC_TXD2,
 162         PD3_AIN_FEC_TXD3,
 163         PD4_AOUT_FEC_RX_ER,
 164         PD5_AOUT_FEC_RXD1,
 165         PD6_AOUT_FEC_RXD2,
 166         PD7_AOUT_FEC_RXD3,
 167         PD8_AF_FEC_MDIO,
 168         PD9_AIN_FEC_MDC,
 169         PD10_AOUT_FEC_CRS,
 170         PD11_AOUT_FEC_TX_CLK,
 171         PD12_AOUT_FEC_RXD0,
 172         PD13_AOUT_FEC_RX_DV,
 173         PD14_AOUT_FEC_CLR,
 174         PD15_AOUT_FEC_COL,
 175         PD16_AIN_FEC_TX_ER,
 176         PF23_AIN_FEC_TX_EN
 177 };
 178
 179 static void gpio_fec_active(void)
 180 {
 181         mxc_gpio_setup_multiple_pins(mxc_fec_pins,
 182                         ARRAY_SIZE(mxc_fec_pins), "FEC");
 183 }
 184
 185 static void gpio_fec_inactive(void)
 186 {
 187         mxc_gpio_release_multiple_pins(mxc_fec_pins,
 188                         ARRAY_SIZE(mxc_fec_pins));
 189 }
 190
 191 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 192         .width = 1,
 193         .hw_ecc = 1,
 194 };
 195
 196 static struct platform_device *platform_devices[] __initdata = {
 197         &pcm038_nor_mtd_device,
 198         &mxc_w1_master_device,
 199         &pcm038_sram_mtd_device,
 200 };
 201
 202 /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
 203  * setup other stuffs to access the sram. */
 204 static void __init pcm038_init_sram(void)
 205 {
 206         __raw_writel(0x0000d843, CSCR_U(1));
 207         __raw_writel(0x22252521, CSCR_L(1));
 208         __raw_writel(0x22220a00, CSCR_A(1));
 209 }
 210
 211 static void __init pcm038_init(void)
 212 {
 213         gpio_fec_active();
 214         pcm038_init_sram();
 215
 216         mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 217         mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 218         mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 219
 220         mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
 221         mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 222
 223         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 224
 225 #ifdef CONFIG_MACH_PCM970_BASEBOARD
 226         pcm970_baseboard_init();
 227 #endif
 228 }
 229
 230 static void __init pcm038_timer_init(void)
 231 {
 232         mxc_clocks_init(26000000);
 233         mxc_timer_init("gpt_clk.0");
 234 }
 235
 236 struct sys_timer pcm038_timer = {
 237         .init = pcm038_timer_init,
 238 };
 239
 240 MACHINE_START(PCM038, "phyCORE-i.MX27")
 241         .phys_io        = AIPI_BASE_ADDR,
 242         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 243         .boot_params    = PHYS_OFFSET + 0x100,
 244         .map_io         = mxc_map_io,
 245         .init_irq       = mxc_init_irq,
 246         .init_machine   = pcm038_init,
 247         .timer          = &pcm038_timer,
 248 MACHINE_END