arch/arm/mach-kirkwood/include/mach/kirkwood.h

   1 /*
   2  * arch/arm/mach-kirkwood/include/mach/kirkwood.h
   3  *
   4  * Generic definitions for Marvell Kirkwood SoC flavors:
   5  *  88F6180, 88F6192 and 88F6281.
   6  *
   7  * This file is licensed under the terms of the GNU General Public
   8  * License version 2.  This program is licensed "as is" without any
   9  * warranty of any kind, whether express or implied.
  10  */
  11
  12 #ifndef __ASM_ARCH_KIRKWOOD_H
  13 #define __ASM_ARCH_KIRKWOOD_H
  14
  15 /*
  16  * Marvell Kirkwood address maps.
  17  *
  18  * phys
  19  * e0000000     PCIe Memory space
  20  * f1000000     on-chip peripheral registers
  21  * f2000000     PCIe I/O space
  22  * f3000000     NAND controller address window
  23  *
  24  * virt         phys            size
  25  * fee00000     f1000000        1M      on-chip peripheral registers
  26  * fef00000     f2000000        1M      PCIe I/O space
  27  */
  28
  29 #define KIRKWOOD_NAND_MEM_PHYS_BASE     0xf3000000
  30 #define KIRKWOOD_NAND_MEM_SIZE          SZ_64K /* 1K is sufficient, but 64K
  31                                                 * is the minimal window size
  32                                                 */
  33
  34 #define KIRKWOOD_PCIE_IO_PHYS_BASE      0xf2000000
  35 #define KIRKWOOD_PCIE_IO_VIRT_BASE      0xfef00000
  36 #define KIRKWOOD_PCIE_IO_BUS_BASE       0x00000000
  37 #define KIRKWOOD_PCIE_IO_SIZE           SZ_1M
  38
  39 #define KIRKWOOD_REGS_PHYS_BASE         0xf1000000
  40 #define KIRKWOOD_REGS_VIRT_BASE         0xfee00000
  41 #define KIRKWOOD_REGS_SIZE              SZ_1M
  42
  43 #define KIRKWOOD_PCIE_MEM_PHYS_BASE     0xe0000000
  44 #define KIRKWOOD_PCIE_MEM_SIZE          SZ_128M
  45
  46 /*
  47  * MBUS bridge registers.
  48  */
  49 #define BRIDGE_VIRT_BASE        (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
  50 #define  CPU_CONTROL            (BRIDGE_VIRT_BASE | 0x0104)
  51 #define   CPU_RESET             0x00000002
  52 #define  RSTOUTn_MASK           (BRIDGE_VIRT_BASE | 0x0108)
  53 #define   SOFT_RESET_OUT_EN     0x00000004
  54 #define  SYSTEM_SOFT_RESET      (BRIDGE_VIRT_BASE | 0x010c)
  55 #define   SOFT_RESET            0x00000001
  56 #define  BRIDGE_CAUSE           (BRIDGE_VIRT_BASE | 0x0110)
  57 #define  BRIDGE_MASK            (BRIDGE_VIRT_BASE | 0x0114)
  58 #define   BRIDGE_INT_TIMER0     0x0002
  59 #define   BRIDGE_INT_TIMER1     0x0004
  60 #define   BRIDGE_INT_TIMER1_CLR (~0x0004)
  61 #define  IRQ_VIRT_BASE          (BRIDGE_VIRT_BASE | 0x0200)
  62 #define   IRQ_CAUSE_LOW_OFF     0x0000
  63 #define   IRQ_MASK_LOW_OFF      0x0004
  64 #define   IRQ_CAUSE_HIGH_OFF    0x0010
  65 #define   IRQ_MASK_HIGH_OFF     0x0014
  66 #define  TIMER_VIRT_BASE        (BRIDGE_VIRT_BASE | 0x0300)
  67 #define  L2_CONFIG_REG          (BRIDGE_VIRT_BASE | 0x0128)
  68 #define   L2_WRITETHROUGH       0x00000010
  69
  70 /*
  71  * Supported devices and revisions.
  72  */
  73 #define MV88F6281_DEV_ID        0x6281
  74 #define MV88F6281_REV_Z0        0
  75 #define MV88F6281_REV_A0        2
  76
  77 #define MV88F6192_DEV_ID        0x6192
  78 #define MV88F6192_REV_Z0        0
  79 #define MV88F6192_REV_A0        2
  80
  81 #define MV88F6180_DEV_ID        0x6180
  82 #define MV88F6180_REV_A0        2
  83
  84 /*
  85  * Register Map
  86  */
  87 #define DDR_VIRT_BASE           (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
  88 #define  DDR_WINDOW_CPU_BASE    (DDR_VIRT_BASE | 0x1500)
  89
  90 #define DEV_BUS_PHYS_BASE       (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
  91 #define DEV_BUS_VIRT_BASE       (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
  92 #define  SAMPLE_AT_RESET        (DEV_BUS_VIRT_BASE | 0x0030)
  93 #define  DEVICE_ID              (DEV_BUS_VIRT_BASE | 0x0034)
  94 #define  RTC_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x0300)
  95 #define  SPI_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x0600)
  96 #define  I2C_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x1000)
  97 #define  UART0_PHYS_BASE        (DEV_BUS_PHYS_BASE | 0x2000)
  98 #define  UART0_VIRT_BASE        (DEV_BUS_VIRT_BASE | 0x2000)
  99 #define  UART1_PHYS_BASE        (DEV_BUS_PHYS_BASE | 0x2100)
 100 #define  UART1_VIRT_BASE        (DEV_BUS_VIRT_BASE | 0x2100)
 101
 102 #define PCIE_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 103
 104 #define USB_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 105
 106 #define XOR0_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x60800)
 107 #define XOR0_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x60800)
 108 #define XOR1_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x60900)
 109 #define XOR1_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x60900)
 110 #define XOR0_HIGH_PHYS_BASE     (KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
 111 #define XOR0_HIGH_VIRT_BASE     (KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
 112 #define XOR1_HIGH_PHYS_BASE     (KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
 113 #define XOR1_HIGH_VIRT_BASE     (KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
 114
 115 #define GE00_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
 116 #define GE01_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 117
 118 #define SATA_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
 119
 120 #define SDIO_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 121
 122
 123 #endif