arch/arm/mach-bcmring/dma.c

   1 /*****************************************************************************
   2 * Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
   3 *
   4 * Unless you and Broadcom execute a separate written software license
   5 * agreement governing use of this software, this software is licensed to you
   6 * under the terms of the GNU General Public License version 2, available at
   7 * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
   8 *
   9 * Notwithstanding the above, under no circumstances may you combine this
  10 * software in any way with any other Broadcom software provided under a
  11 * license other than the GPL, without Broadcom's express prior written
  12 * consent.
  13 *****************************************************************************/
  14
  15 /****************************************************************************/
  16 /**
  17 *   @file   dma.c
  18 *
  19 *   @brief  Implements the DMA interface.
  20 */
  21 /****************************************************************************/
  22
  23 /* ---- Include Files ---------------------------------------------------- */
  24
  25 #include <linux/module.h>
  26 #include <linux/device.h>
  27 #include <linux/dma-mapping.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/irqreturn.h>
  30 #include <linux/proc_fs.h>
  31 #include <linux/slab.h>
  32
  33 #include <mach/timer.h>
  34
  35 #include <linux/mm.h>
  36 #include <linux/pfn.h>
  37 #include <asm/atomic.h>
  38 #include <mach/dma.h>
  39
  40 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
  41 /* especially since dc4 doesn't use kmalloc'd memory. */
  42
  43 #define ALLOW_MAP_OF_KMALLOC_MEMORY 0
  44
  45 /* ---- Public Variables ------------------------------------------------- */
  46
  47 /* ---- Private Constants and Types -------------------------------------- */
  48
  49 #define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
  50
  51 #define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
  52 #define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
  53
  54 #define DMA_MAP_DEBUG   0
  55
  56 #if DMA_MAP_DEBUG
  57 #   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
  58 #else
  59 #   define  DMA_MAP_PRINT(fmt, args...)
  60 #endif
  61
  62 /* ---- Private Variables ------------------------------------------------ */
  63
  64 static DMA_Global_t gDMA;
  65 static struct proc_dir_entry *gDmaDir;
  66
  67 static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
  68 static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
  69 static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
  70 static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
  71
  72 #include "dma_device.c"
  73
  74 /* ---- Private Function Prototypes -------------------------------------- */
  75
  76 /* ---- Functions  ------------------------------------------------------- */
  77
  78 /****************************************************************************/
  79 /**
  80 *   Displays information for /proc/dma/mem-type
  81 */
  82 /****************************************************************************/
  83
  84 static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
  85                                   int count, int *eof, void *data)
  86 {
  87         int len = 0;
  88
  89         len += sprintf(buf + len, "dma_map_mem statistics\n");
  90         len +=
  91             sprintf(buf + len, "coherent: %d\n",
  92                     atomic_read(&gDmaStatMemTypeCoherent));
  93         len +=
  94             sprintf(buf + len, "kmalloc:  %d\n",
  95                     atomic_read(&gDmaStatMemTypeKmalloc));
  96         len +=
  97             sprintf(buf + len, "vmalloc:  %d\n",
  98                     atomic_read(&gDmaStatMemTypeVmalloc));
  99         len +=
 100             sprintf(buf + len, "user:     %d\n",
 101                     atomic_read(&gDmaStatMemTypeUser));
 102
 103         return len;
 104 }
 105
 106 /****************************************************************************/
 107 /**
 108 *   Displays information for /proc/dma/channels
 109 */
 110 /****************************************************************************/
 111
 112 static int dma_proc_read_channels(char *buf, char **start, off_t offset,
 113                                   int count, int *eof, void *data)
 114 {
 115         int controllerIdx;
 116         int channelIdx;
 117         int limit = count - 200;
 118         int len = 0;
 119         DMA_Channel_t *channel;
 120
 121         if (down_interruptible(&gDMA.lock) < 0) {
 122                 return -ERESTARTSYS;
 123         }
 124
 125         for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
 126              controllerIdx++) {
 127                 for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
 128                      channelIdx++) {
 129                         if (len >= limit) {
 130                                 break;
 131                         }
 132
 133                         channel =
 134                             &gDMA.controller[controllerIdx].channel[channelIdx];
 135
 136                         len +=
 137                             sprintf(buf + len, "%d:%d ", controllerIdx,
 138                                     channelIdx);
 139
 140                         if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
 141                             0) {
 142                                 len +=
 143                                     sprintf(buf + len, "Dedicated for %s ",
 144                                             DMA_gDeviceAttribute[channel->
 145                                                                  devType].name);
 146                         } else {
 147                                 len += sprintf(buf + len, "Shared ");
 148                         }
 149
 150                         if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
 151                                 len += sprintf(buf + len, "No ISR ");
 152                         }
 153
 154                         if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
 155                                 len += sprintf(buf + len, "Fifo: 128 ");
 156                         } else {
 157                                 len += sprintf(buf + len, "Fifo: 64  ");
 158                         }
 159
 160                         if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
 161                                 len +=
 162                                     sprintf(buf + len, "InUse by %s",
 163                                             DMA_gDeviceAttribute[channel->
 164                                                                  devType].name);
 165 #if (DMA_DEBUG_TRACK_RESERVATION)
 166                                 len +=
 167                                     sprintf(buf + len, " (%s:%d)",
 168                                             channel->fileName,
 169                                             channel->lineNum);
 170 #endif
 171                         } else {
 172                                 len += sprintf(buf + len, "Avail ");
 173                         }
 174
 175                         if (channel->lastDevType != DMA_DEVICE_NONE) {
 176                                 len +=
 177                                     sprintf(buf + len, "Last use: %s ",
 178                                             DMA_gDeviceAttribute[channel->
 179                                                                  lastDevType].
 180                                             name);
 181                         }
 182
 183                         len += sprintf(buf + len, "\n");
 184                 }
 185         }
 186         up(&gDMA.lock);
 187         *eof = 1;
 188
 189         return len;
 190 }
 191
 192 /****************************************************************************/
 193 /**
 194 *   Displays information for /proc/dma/devices
 195 */
 196 /****************************************************************************/
 197
 198 static int dma_proc_read_devices(char *buf, char **start, off_t offset,
 199                                  int count, int *eof, void *data)
 200 {
 201         int limit = count - 200;
 202         int len = 0;
 203         int devIdx;
 204
 205         if (down_interruptible(&gDMA.lock) < 0) {
 206                 return -ERESTARTSYS;
 207         }
 208
 209         for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
 210                 DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
 211
 212                 if (devAttr->name == NULL) {
 213                         continue;
 214                 }
 215
 216                 if (len >= limit) {
 217                         break;
 218                 }
 219
 220                 len += sprintf(buf + len, "%-12s ", devAttr->name);
 221
 222                 if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
 223                         len +=
 224                             sprintf(buf + len, "Dedicated %d:%d ",
 225                                     devAttr->dedicatedController,
 226                                     devAttr->dedicatedChannel);
 227                 } else {
 228                         len += sprintf(buf + len, "Shared DMA:");
 229                         if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
 230                                 len += sprintf(buf + len, "0");
 231                         }
 232                         if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
 233                                 len += sprintf(buf + len, "1");
 234                         }
 235                         len += sprintf(buf + len, " ");
 236                 }
 237                 if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
 238                         len += sprintf(buf + len, "NoISR ");
 239                 }
 240                 if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
 241                         len += sprintf(buf + len, "Allow-128 ");
 242                 }
 243
 244                 len +=
 245                     sprintf(buf + len,
 246                             "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
 247                             devAttr->numTransfers, devAttr->transferTicks,
 248                             devAttr->transferBytes,
 249                             devAttr->ring.bytesAllocated);
 250
 251         }
 252
 253         up(&gDMA.lock);
 254         *eof = 1;
 255
 256         return len;
 257 }
 258
 259 /****************************************************************************/
 260 /**
 261 *   Determines if a DMA_Device_t is "valid".
 262 *
 263 *   @return
 264 *       TRUE        - dma device is valid
 265 *       FALSE       - dma device isn't valid
 266 */
 267 /****************************************************************************/
 268
 269 static inline int IsDeviceValid(DMA_Device_t device)
 270 {
 271         return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
 272 }
 273
 274 /****************************************************************************/
 275 /**
 276 *   Translates a DMA handle into a pointer to a channel.
 277 *
 278 *   @return
 279 *       non-NULL    - pointer to DMA_Channel_t
 280 *       NULL        - DMA Handle was invalid
 281 */
 282 /****************************************************************************/
 283
 284 static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
 285 {
 286         int controllerIdx;
 287         int channelIdx;
 288
 289         controllerIdx = CONTROLLER_FROM_HANDLE(handle);
 290         channelIdx = CHANNEL_FROM_HANDLE(handle);
 291
 292         if ((controllerIdx > DMA_NUM_CONTROLLERS)
 293             || (channelIdx > DMA_NUM_CHANNELS)) {
 294                 return NULL;
 295         }
 296         return &gDMA.controller[controllerIdx].channel[channelIdx];
 297 }
 298
 299 /****************************************************************************/
 300 /**
 301 *   Interrupt handler which is called to process DMA interrupts.
 302 */
 303 /****************************************************************************/
 304
 305 static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
 306 {
 307         DMA_Channel_t *channel;
 308         DMA_DeviceAttribute_t *devAttr;
 309         int irqStatus;
 310
 311         channel = (DMA_Channel_t *) dev_id;
 312
 313         /* Figure out why we were called, and knock down the interrupt */
 314
 315         irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
 316         dmacHw_clearInterrupt(channel->dmacHwHandle);
 317
 318         if ((channel->devType < 0)
 319             || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
 320                 printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
 321                        channel->devType);
 322                 return IRQ_NONE;
 323         }
 324         devAttr = &DMA_gDeviceAttribute[channel->devType];
 325
 326         /* Update stats */
 327
 328         if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
 329                 devAttr->transferTicks +=
 330                     (timer_get_tick_count() - devAttr->transferStartTime);
 331         }
 332
 333         if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
 334                 printk(KERN_ERR
 335                        "dma_interrupt_handler: devType :%d DMA error (%s)\n",
 336                        channel->devType, devAttr->name);
 337         } else {
 338                 devAttr->numTransfers++;
 339                 devAttr->transferBytes += devAttr->numBytes;
 340         }
 341
 342         /* Call any installed handler */
 343
 344         if (devAttr->devHandler != NULL) {
 345                 devAttr->devHandler(channel->devType, irqStatus,
 346                                     devAttr->userData);
 347         }
 348
 349         return IRQ_HANDLED;
 350 }
 351
 352 /****************************************************************************/
 353 /**
 354 *   Allocates memory to hold a descriptor ring. The descriptor ring then
 355 *   needs to be populated by making one or more calls to
 356 *   dna_add_descriptors.
 357 *
 358 *   The returned descriptor ring will be automatically initialized.
 359 *
 360 *   @return
 361 *       0           Descriptor ring was allocated successfully
 362 *       -EINVAL     Invalid parameters passed in
 363 *       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
 364 */
 365 /****************************************************************************/
 366
 367 int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,       /* Descriptor ring to populate */
 368                               int numDescriptors        /* Number of descriptors that need to be allocated. */
 369     ) {
 370         size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
 371
 372         if ((ring == NULL) || (numDescriptors <= 0)) {
 373                 return -EINVAL;
 374         }
 375
 376         ring->physAddr = 0;
 377         ring->descriptorsAllocated = 0;
 378         ring->bytesAllocated = 0;
 379
 380         ring->virtAddr = dma_alloc_writecombine(NULL,
 381                                                      bytesToAlloc,
 382                                                      &ring->physAddr,
 383                                                      GFP_KERNEL);
 384         if (ring->virtAddr == NULL) {
 385                 return -ENOMEM;
 386         }
 387
 388         ring->bytesAllocated = bytesToAlloc;
 389         ring->descriptorsAllocated = numDescriptors;
 390
 391         return dma_init_descriptor_ring(ring, numDescriptors);
 392 }
 393
 394 EXPORT_SYMBOL(dma_alloc_descriptor_ring);
 395
 396 /****************************************************************************/
 397 /**
 398 *   Releases the memory which was previously allocated for a descriptor ring.
 399 */
 400 /****************************************************************************/
 401
 402 void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring        /* Descriptor to release */
 403     ) {
 404         if (ring->virtAddr != NULL) {
 405                 dma_free_writecombine(NULL,
 406                                       ring->bytesAllocated,
 407                                       ring->virtAddr, ring->physAddr);
 408         }
 409
 410         ring->bytesAllocated = 0;
 411         ring->descriptorsAllocated = 0;
 412         ring->virtAddr = NULL;
 413         ring->physAddr = 0;
 414 }
 415
 416 EXPORT_SYMBOL(dma_free_descriptor_ring);
 417
 418 /****************************************************************************/
 419 /**
 420 *   Initializes a descriptor ring, so that descriptors can be added to it.
 421 *   Once a descriptor ring has been allocated, it may be reinitialized for
 422 *   use with additional/different regions of memory.
 423 *
 424 *   Note that if 7 descriptors are allocated, it's perfectly acceptable to
 425 *   initialize the ring with a smaller number of descriptors. The amount
 426 *   of memory allocated for the descriptor ring will not be reduced, and
 427 *   the descriptor ring may be reinitialized later
 428 *
 429 *   @return
 430 *       0           Descriptor ring was initialized successfully
 431 *       -ENOMEM     The descriptor which was passed in has insufficient space
 432 *                   to hold the desired number of descriptors.
 433 */
 434 /****************************************************************************/
 435
 436 int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,        /* Descriptor ring to initialize */
 437                              int numDescriptors /* Number of descriptors to initialize. */
 438     ) {
 439         if (ring->virtAddr == NULL) {
 440                 return -EINVAL;
 441         }
 442         if (dmacHw_initDescriptor(ring->virtAddr,
 443                                   ring->physAddr,
 444                                   ring->bytesAllocated, numDescriptors) < 0) {
 445                 printk(KERN_ERR
 446                        "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
 447                 return -ENOMEM;
 448         }
 449
 450         return 0;
 451 }
 452
 453 EXPORT_SYMBOL(dma_init_descriptor_ring);
 454
 455 /****************************************************************************/
 456 /**
 457 *   Determines the number of descriptors which would be required for a
 458 *   transfer of the indicated memory region.
 459 *
 460 *   This function also needs to know which DMA device this transfer will
 461 *   be destined for, so that the appropriate DMA configuration can be retrieved.
 462 *   DMA parameters such as transfer width, and whether this is a memory-to-memory
 463 *   or memory-to-peripheral, etc can all affect the actual number of descriptors
 464 *   required.
 465 *
 466 *   @return
 467 *       > 0     Returns the number of descriptors required for the indicated transfer
 468 *       -ENODEV - Device handed in is invalid.
 469 *       -EINVAL Invalid parameters
 470 *       -ENOMEM Memory exhausted
 471 */
 472 /****************************************************************************/
 473
 474 int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
 475                                    dma_addr_t srcData,  /* Place to get data to write to device */
 476                                    dma_addr_t dstData,  /* Pointer to device data address */
 477                                    size_t numBytes      /* Number of bytes to transfer to the device */
 478     ) {
 479         int numDescriptors;
 480         DMA_DeviceAttribute_t *devAttr;
 481
 482         if (!IsDeviceValid(device)) {
 483                 return -ENODEV;
 484         }
 485         devAttr = &DMA_gDeviceAttribute[device];
 486
 487         numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
 488                                                               (void *)srcData,
 489                                                               (void *)dstData,
 490                                                               numBytes);
 491         if (numDescriptors < 0) {
 492                 printk(KERN_ERR
 493                        "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
 494                 return -EINVAL;
 495         }
 496
 497         return numDescriptors;
 498 }
 499
 500 EXPORT_SYMBOL(dma_calculate_descriptor_count);
 501
 502 /****************************************************************************/
 503 /**
 504 *   Adds a region of memory to the descriptor ring. Note that it may take
 505 *   multiple descriptors for each region of memory. It is the callers
 506 *   responsibility to allocate a sufficiently large descriptor ring.
 507 *
 508 *   @return
 509 *       0       Descriptors were added successfully
 510 *       -ENODEV Device handed in is invalid.
 511 *       -EINVAL Invalid parameters
 512 *       -ENOMEM Memory exhausted
 513 */
 514 /****************************************************************************/
 515
 516 int dma_add_descriptors(DMA_DescriptorRing_t *ring,     /* Descriptor ring to add descriptors to */
 517                         DMA_Device_t device,    /* DMA Device that descriptors are for */
 518                         dma_addr_t srcData,     /* Place to get data (memory or device) */
 519                         dma_addr_t dstData,     /* Place to put data (memory or device) */
 520                         size_t numBytes /* Number of bytes to transfer to the device */
 521     ) {
 522         int rc;
 523         DMA_DeviceAttribute_t *devAttr;
 524
 525         if (!IsDeviceValid(device)) {
 526                 return -ENODEV;
 527         }
 528         devAttr = &DMA_gDeviceAttribute[device];
 529
 530         rc = dmacHw_setDataDescriptor(&devAttr->config,
 531                                       ring->virtAddr,
 532                                       (void *)srcData,
 533                                       (void *)dstData, numBytes);
 534         if (rc < 0) {
 535                 printk(KERN_ERR
 536                        "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
 537                        rc);
 538                 return -ENOMEM;
 539         }
 540
 541         return 0;
 542 }
 543
 544 EXPORT_SYMBOL(dma_add_descriptors);
 545
 546 /****************************************************************************/
 547 /**
 548 *   Sets the descriptor ring associated with a device.
 549 *
 550 *   Once set, the descriptor ring will be associated with the device, even
 551 *   across channel request/free calls. Passing in a NULL descriptor ring
 552 *   will release any descriptor ring currently associated with the device.
 553 *
 554 *   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
 555 *         the descriptor ring may be released and reallocated.
 556 *
 557 *   Note: This function will release the descriptor memory for any current
 558 *         descriptor ring associated with this device.
 559 *
 560 *   @return
 561 *       0       Descriptors were added successfully
 562 *       -ENODEV Device handed in is invalid.
 563 */
 564 /****************************************************************************/
 565
 566 int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
 567                                    DMA_DescriptorRing_t *ring   /* Descriptor ring to add descriptors to */
 568     ) {
 569         DMA_DeviceAttribute_t *devAttr;
 570
 571         if (!IsDeviceValid(device)) {
 572                 return -ENODEV;
 573         }
 574         devAttr = &DMA_gDeviceAttribute[device];
 575
 576         /* Free the previously allocated descriptor ring */
 577
 578         dma_free_descriptor_ring(&devAttr->ring);
 579
 580         if (ring != NULL) {
 581                 /* Copy in the new one */
 582
 583                 devAttr->ring = *ring;
 584         }
 585
 586         /* Set things up so that if dma_transfer is called then this descriptor */
 587         /* ring will get freed. */
 588
 589         devAttr->prevSrcData = 0;
 590         devAttr->prevDstData = 0;
 591         devAttr->prevNumBytes = 0;
 592
 593         return 0;
 594 }
 595
 596 EXPORT_SYMBOL(dma_set_device_descriptor_ring);
 597
 598 /****************************************************************************/
 599 /**
 600 *   Retrieves the descriptor ring associated with a device.
 601 *
 602 *   @return
 603 *       0       Descriptors were added successfully
 604 *       -ENODEV Device handed in is invalid.
 605 */
 606 /****************************************************************************/
 607
 608 int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
 609                                    DMA_DescriptorRing_t *ring   /* Place to store retrieved ring */
 610     ) {
 611         DMA_DeviceAttribute_t *devAttr;
 612
 613         memset(ring, 0, sizeof(*ring));
 614
 615         if (!IsDeviceValid(device)) {
 616                 return -ENODEV;
 617         }
 618         devAttr = &DMA_gDeviceAttribute[device];
 619
 620         *ring = devAttr->ring;
 621
 622         return 0;
 623 }
 624
 625 EXPORT_SYMBOL(dma_get_device_descriptor_ring);
 626
 627 /****************************************************************************/
 628 /**
 629 *   Configures a DMA channel.
 630 *
 631 *   @return
 632 *       >= 0    - Initialization was successfull.
 633 *
 634 *       -EBUSY  - Device is currently being used.
 635 *       -ENODEV - Device handed in is invalid.
 636 */
 637 /****************************************************************************/
 638
 639 static int ConfigChannel(DMA_Handle_t handle)
 640 {
 641         DMA_Channel_t *channel;
 642         DMA_DeviceAttribute_t *devAttr;
 643         int controllerIdx;
 644
 645         channel = HandleToChannel(handle);
 646         if (channel == NULL) {
 647                 return -ENODEV;
 648         }
 649         devAttr = &DMA_gDeviceAttribute[channel->devType];
 650         controllerIdx = CONTROLLER_FROM_HANDLE(handle);
 651
 652         if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
 653                 if (devAttr->config.transferType ==
 654                     dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
 655                         devAttr->config.dstPeripheralPort =
 656                             devAttr->dmacPort[controllerIdx];
 657                 } else if (devAttr->config.transferType ==
 658                            dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
 659                         devAttr->config.srcPeripheralPort =
 660                             devAttr->dmacPort[controllerIdx];
 661                 }
 662         }
 663
 664         if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
 665                 printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
 666                 return -EIO;
 667         }
 668
 669         return 0;
 670 }
 671
 672 /****************************************************************************/
 673 /**
 674 *   Initializes all of the data structures associated with the DMA.
 675 *   @return
 676 *       >= 0    - Initialization was successfull.
 677 *
 678 *       -EBUSY  - Device is currently being used.
 679 *       -ENODEV - Device handed in is invalid.
 680 */
 681 /****************************************************************************/
 682
 683 int dma_init(void)
 684 {
 685         int rc = 0;
 686         int controllerIdx;
 687         int channelIdx;
 688         DMA_Device_t devIdx;
 689         DMA_Channel_t *channel;
 690         DMA_Handle_t dedicatedHandle;
 691
 692         memset(&gDMA, 0, sizeof(gDMA));
 693
 694         sema_init(&gDMA.lock, 0);
 695         init_waitqueue_head(&gDMA.freeChannelQ);
 696
 697         /* Initialize the Hardware */
 698
 699         dmacHw_initDma();
 700
 701         /* Start off by marking all of the DMA channels as shared. */
 702
 703         for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
 704              controllerIdx++) {
 705                 for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
 706                      channelIdx++) {
 707                         channel =
 708                             &gDMA.controller[controllerIdx].channel[channelIdx];
 709
 710                         channel->flags = 0;
 711                         channel->devType = DMA_DEVICE_NONE;
 712                         channel->lastDevType = DMA_DEVICE_NONE;
 713
 714 #if (DMA_DEBUG_TRACK_RESERVATION)
 715                         channel->fileName = "";
 716                         channel->lineNum = 0;
 717 #endif
 718
 719                         channel->dmacHwHandle =
 720                             dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
 721                                                     (controllerIdx,
 722                                                      channelIdx));
 723                         dmacHw_initChannel(channel->dmacHwHandle);
 724                 }
 725         }
 726
 727         /* Record any special attributes that channels may have */
 728
 729         gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
 730         gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
 731         gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
 732         gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
 733
 734         /* Now walk through and record the dedicated channels. */
 735
 736         for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
 737                 DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
 738
 739                 if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
 740                     && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
 741                         printk(KERN_ERR
 742                                "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
 743                                devAttr->name);
 744                         rc = -EINVAL;
 745                         goto out;
 746                 }
 747
 748                 if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
 749                         /* This is a dedicated device. Mark the channel as being reserved. */
 750
 751                         if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
 752                                 printk(KERN_ERR
 753                                        "DMA Device: %s DMA Controller %d is out of range\n",
 754                                        devAttr->name,
 755                                        devAttr->dedicatedController);
 756                                 rc = -EINVAL;
 757                                 goto out;
 758                         }
 759
 760                         if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
 761                                 printk(KERN_ERR
 762                                        "DMA Device: %s DMA Channel %d is out of range\n",
 763                                        devAttr->name,
 764                                        devAttr->dedicatedChannel);
 765                                 rc = -EINVAL;
 766                                 goto out;
 767                         }
 768
 769                         dedicatedHandle =
 770                             MAKE_HANDLE(devAttr->dedicatedController,
 771                                         devAttr->dedicatedChannel);
 772                         channel = HandleToChannel(dedicatedHandle);
 773
 774                         if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
 775                             0) {
 776                                 printk
 777                                     ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
 778                                      devAttr->name,
 779                                      devAttr->dedicatedController,
 780                                      devAttr->dedicatedChannel,
 781                                      DMA_gDeviceAttribute[channel->devType].
 782                                      name);
 783                                 rc = -EBUSY;
 784                                 goto out;
 785                         }
 786
 787                         channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
 788                         channel->devType = devIdx;
 789
 790                         if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
 791                                 channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
 792                         }
 793
 794                         /* For dedicated channels, we can go ahead and configure the DMA channel now */
 795                         /* as well. */
 796
 797                         ConfigChannel(dedicatedHandle);
 798                 }
 799         }
 800
 801         /* Go through and register the interrupt handlers */
 802
 803         for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
 804              controllerIdx++) {
 805                 for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
 806                      channelIdx++) {
 807                         channel =
 808                             &gDMA.controller[controllerIdx].channel[channelIdx];
 809
 810                         if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
 811                                 snprintf(channel->name, sizeof(channel->name),
 812                                          "dma %d:%d %s", controllerIdx,
 813                                          channelIdx,
 814                                          channel->devType ==
 815                                          DMA_DEVICE_NONE ? "" :
 816                                          DMA_gDeviceAttribute[channel->devType].
 817                                          name);
 818
 819                                 rc =
 820                                      request_irq(IRQ_DMA0C0 +
 821                                                  (controllerIdx *
 822                                                   DMA_NUM_CHANNELS) +
 823                                                  channelIdx,
 824                                                  dma_interrupt_handler,
 825                                                  IRQF_DISABLED, channel->name,
 826                                                  channel);
 827                                 if (rc != 0) {
 828                                         printk(KERN_ERR
 829                                                "request_irq for IRQ_DMA%dC%d failed\n",
 830                                                controllerIdx, channelIdx);
 831                                 }
 832                         }
 833                 }
 834         }
 835
 836         /* Create /proc/dma/channels and /proc/dma/devices */
 837
 838         gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
 839
 840         if (gDmaDir == NULL) {
 841                 printk(KERN_ERR "Unable to create /proc/dma\n");
 842         } else {
 843                 create_proc_read_entry("channels", 0, gDmaDir,
 844                                        dma_proc_read_channels, NULL);
 845                 create_proc_read_entry("devices", 0, gDmaDir,
 846                                        dma_proc_read_devices, NULL);
 847                 create_proc_read_entry("mem-type", 0, gDmaDir,
 848                                        dma_proc_read_mem_type, NULL);
 849         }
 850
 851 out:
 852
 853         up(&gDMA.lock);
 854
 855         return rc;
 856 }
 857
 858 /****************************************************************************/
 859 /**
 860 *   Reserves a channel for use with @a dev. If the device is setup to use
 861 *   a shared channel, then this function will block until a free channel
 862 *   becomes available.
 863 *
 864 *   @return
 865 *       >= 0    - A valid DMA Handle.
 866 *       -EBUSY  - Device is currently being used.
 867 *       -ENODEV - Device handed in is invalid.
 868 */
 869 /****************************************************************************/
 870
 871 #if (DMA_DEBUG_TRACK_RESERVATION)
 872 DMA_Handle_t dma_request_channel_dbg
 873     (DMA_Device_t dev, const char *fileName, int lineNum)
 874 #else
 875 DMA_Handle_t dma_request_channel(DMA_Device_t dev)
 876 #endif
 877 {
 878         DMA_Handle_t handle;
 879         DMA_DeviceAttribute_t *devAttr;
 880         DMA_Channel_t *channel;
 881         int controllerIdx;
 882         int controllerIdx2;
 883         int channelIdx;
 884
 885         if (down_interruptible(&gDMA.lock) < 0) {
 886                 return -ERESTARTSYS;
 887         }
 888
 889         if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
 890                 handle = -ENODEV;
 891                 goto out;
 892         }
 893         devAttr = &DMA_gDeviceAttribute[dev];
 894
 895 #if (DMA_DEBUG_TRACK_RESERVATION)
 896         {
 897                 char *s;
 898
 899                 s = strrchr(fileName, '/');
 900                 if (s != NULL) {
 901                         fileName = s + 1;
 902                 }
 903         }
 904 #endif
 905         if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
 906                 /* This device has already been requested and not been freed */
 907
 908                 printk(KERN_ERR "%s: device %s is already requested\n",
 909                        __func__, devAttr->name);
 910                 handle = -EBUSY;
 911                 goto out;
 912         }
 913
 914         if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
 915                 /* This device has a dedicated channel. */
 916
 917                 channel =
 918                     &gDMA.controller[devAttr->dedicatedController].
 919                     channel[devAttr->dedicatedChannel];
 920                 if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
 921                         handle = -EBUSY;
 922                         goto out;
 923                 }
 924
 925                 channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
 926                 devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
 927
 928 #if (DMA_DEBUG_TRACK_RESERVATION)
 929                 channel->fileName = fileName;
 930                 channel->lineNum = lineNum;
 931 #endif
 932                 handle =
 933                     MAKE_HANDLE(devAttr->dedicatedController,
 934                                 devAttr->dedicatedChannel);
 935                 goto out;
 936         }
 937
 938         /* This device needs to use one of the shared channels. */
 939
 940         handle = DMA_INVALID_HANDLE;
 941         while (handle == DMA_INVALID_HANDLE) {
 942                 /* Scan through the shared channels and see if one is available */
 943
 944                 for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
 945                      controllerIdx2++) {
 946                         /* Check to see if we should try on controller 1 first. */
 947
 948                         controllerIdx = controllerIdx2;
 949                         if ((devAttr->
 950                              flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
 951                                 controllerIdx = 1 - controllerIdx;
 952                         }
 953
 954                         /* See if the device is available on the controller being tested */
 955
 956                         if ((devAttr->
 957                              flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
 958                             != 0) {
 959                                 for (channelIdx = 0;
 960                                      channelIdx < DMA_NUM_CHANNELS;
 961                                      channelIdx++) {
 962                                         channel =
 963                                             &gDMA.controller[controllerIdx].
 964                                             channel[channelIdx];
 965
 966                                         if (((channel->
 967                                               flags &
 968                                               DMA_CHANNEL_FLAG_IS_DEDICATED) ==
 969                                              0)
 970                                             &&
 971                                             ((channel->
 972                                               flags & DMA_CHANNEL_FLAG_IN_USE)
 973                                              == 0)) {
 974                                                 if (((channel->
 975                                                       flags &
 976                                                       DMA_CHANNEL_FLAG_LARGE_FIFO)
 977                                                      != 0)
 978                                                     &&
 979                                                     ((devAttr->
 980                                                       flags &
 981                                                       DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
 982                                                      == 0)) {
 983                                                         /* This channel is a large fifo - don't tie it up */
 984                                                         /* with devices that we don't want using it. */
 985
 986                                                         continue;
 987                                                 }
 988
 989                                                 channel->flags |=
 990                                                     DMA_CHANNEL_FLAG_IN_USE;
 991                                                 channel->devType = dev;
 992                                                 devAttr->flags |=
 993                                                     DMA_DEVICE_FLAG_IN_USE;
 994
 995 #if (DMA_DEBUG_TRACK_RESERVATION)
 996                                                 channel->fileName = fileName;
 997                                                 channel->lineNum = lineNum;
 998 #endif
 999                                                 handle =
1000                                                     MAKE_HANDLE(controllerIdx,
1001                                                                 channelIdx);
1002
1003                                                 /* Now that we've reserved the channel - we can go ahead and configure it */
1004
1005                                                 if (ConfigChannel(handle) != 0) {
1006                                                         handle = -EIO;
1007                                                         printk(KERN_ERR
1008                                                                "dma_request_channel: ConfigChannel failed\n");
1009                                                 }
1010                                                 goto out;
1011                                         }
1012                                 }
1013                         }
1014                 }
1015
1016                 /* No channels are currently available. Let's wait for one to free up. */
1017
1018                 {
1019                         DEFINE_WAIT(wait);
1020
1021                         prepare_to_wait(&gDMA.freeChannelQ, &wait,
1022                                         TASK_INTERRUPTIBLE);
1023                         up(&gDMA.lock);
1024                         schedule();
1025                         finish_wait(&gDMA.freeChannelQ, &wait);
1026
1027                         if (signal_pending(current)) {
1028                                 /* We don't currently hold gDMA.lock, so we return directly */
1029
1030                                 return -ERESTARTSYS;
1031                         }
1032                 }
1033
1034                 if (down_interruptible(&gDMA.lock)) {
1035                         return -ERESTARTSYS;
1036                 }
1037         }
1038
1039 out:
1040         up(&gDMA.lock);
1041
1042         return handle;
1043 }
1044
1045 /* Create both _dbg and non _dbg functions for modules. */
1046
1047 #if (DMA_DEBUG_TRACK_RESERVATION)
1048 #undef dma_request_channel
1049 DMA_Handle_t dma_request_channel(DMA_Device_t dev)
1050 {
1051         return dma_request_channel_dbg(dev, __FILE__, __LINE__);
1052 }
1053
1054 EXPORT_SYMBOL(dma_request_channel_dbg);
1055 #endif
1056 EXPORT_SYMBOL(dma_request_channel);
1057
1058 /****************************************************************************/
1059 /**
1060 *   Frees a previously allocated DMA Handle.
1061 */
1062 /****************************************************************************/
1063
1064 int dma_free_channel(DMA_Handle_t handle        /* DMA handle. */
1065     ) {
1066         int rc = 0;
1067         DMA_Channel_t *channel;
1068         DMA_DeviceAttribute_t *devAttr;
1069
1070         if (down_interruptible(&gDMA.lock) < 0) {
1071                 return -ERESTARTSYS;
1072         }
1073
1074         channel = HandleToChannel(handle);
1075         if (channel == NULL) {
1076                 rc = -EINVAL;
1077                 goto out;
1078         }
1079
1080         devAttr = &DMA_gDeviceAttribute[channel->devType];
1081
1082         if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
1083                 channel->lastDevType = channel->devType;
1084                 channel->devType = DMA_DEVICE_NONE;
1085         }
1086         channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
1087         devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
1088
1089 out:
1090         up(&gDMA.lock);
1091
1092         wake_up_interruptible(&gDMA.freeChannelQ);
1093
1094         return rc;
1095 }
1096
1097 EXPORT_SYMBOL(dma_free_channel);
1098
1099 /****************************************************************************/
1100 /**
1101 *   Determines if a given device has been configured as using a shared
1102 *   channel.
1103 *
1104 *   @return
1105 *       0           Device uses a dedicated channel
1106 *       > zero      Device uses a shared channel
1107 *       < zero      Error code
1108 */
1109 /****************************************************************************/
1110
1111 int dma_device_is_channel_shared(DMA_Device_t device    /* Device to check. */
1112     ) {
1113         DMA_DeviceAttribute_t *devAttr;
1114
1115         if (!IsDeviceValid(device)) {
1116                 return -ENODEV;
1117         }
1118         devAttr = &DMA_gDeviceAttribute[device];
1119
1120         return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
1121 }
1122
1123 EXPORT_SYMBOL(dma_device_is_channel_shared);
1124
1125 /****************************************************************************/
1126 /**
1127 *   Allocates buffers for the descriptors. This is normally done automatically
1128 *   but needs to be done explicitly when initiating a dma from interrupt
1129 *   context.
1130 *
1131 *   @return
1132 *       0       Descriptors were allocated successfully
1133 *       -EINVAL Invalid device type for this kind of transfer
1134 *               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
1135 *       -ENOMEM Memory exhausted
1136 */
1137 /****************************************************************************/
1138
1139 int dma_alloc_descriptors(DMA_Handle_t handle,  /* DMA Handle */
1140                           dmacHw_TRANSFER_TYPE_e transferType,  /* Type of transfer being performed */
1141                           dma_addr_t srcData,   /* Place to get data to write to device */
1142                           dma_addr_t dstData,   /* Pointer to device data address */
1143                           size_t numBytes       /* Number of bytes to transfer to the device */
1144     ) {
1145         DMA_Channel_t *channel;
1146         DMA_DeviceAttribute_t *devAttr;
1147         int numDescriptors;
1148         size_t ringBytesRequired;
1149         int rc = 0;
1150
1151         channel = HandleToChannel(handle);
1152         if (channel == NULL) {
1153                 return -ENODEV;
1154         }
1155
1156         devAttr = &DMA_gDeviceAttribute[channel->devType];
1157
1158         if (devAttr->config.transferType != transferType) {
1159                 return -EINVAL;
1160         }
1161
1162         /* Figure out how many descriptors we need. */
1163
1164         /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
1165         /*        srcData, dstData, numBytes); */
1166
1167         numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
1168                                                               (void *)srcData,
1169                                                               (void *)dstData,
1170                                                               numBytes);
1171         if (numDescriptors < 0) {
1172                 printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
1173                        __func__);
1174                 return -EINVAL;
1175         }
1176
1177         /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
1178         /* a new one. */
1179
1180         ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
1181
1182         /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
1183
1184         if (ringBytesRequired > devAttr->ring.bytesAllocated) {
1185                 /* Make sure that this code path is never taken from interrupt context. */
1186                 /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
1187                 /* allocation needs to have already been done. */
1188
1189                 might_sleep();
1190
1191                 /* Free the old descriptor ring and allocate a new one. */
1192
1193                 dma_free_descriptor_ring(&devAttr->ring);
1194
1195                 /* And allocate a new one. */
1196
1197                 rc =
1198                      dma_alloc_descriptor_ring(&devAttr->ring,
1199                                                numDescriptors);
1200                 if (rc < 0) {
1201                         printk(KERN_ERR
1202                                "%s: dma_alloc_descriptor_ring(%d) failed\n",
1203                                __func__, numDescriptors);
1204                         return rc;
1205                 }
1206                 /* Setup the descriptor for this transfer */
1207
1208                 if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
1209                                           devAttr->ring.physAddr,
1210                                           devAttr->ring.bytesAllocated,
1211                                           numDescriptors) < 0) {
1212                         printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
1213                                __func__);
1214                         return -EINVAL;
1215                 }
1216         } else {
1217                 /* We've already got enough ring buffer allocated. All we need to do is reset */
1218                 /* any control information, just in case the previous DMA was stopped. */
1219
1220                 dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
1221         }
1222
1223         /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
1224         /* as last time, then we don't need to call setDataDescriptor again. */
1225
1226         if (dmacHw_setDataDescriptor(&devAttr->config,
1227                                      devAttr->ring.virtAddr,
1228                                      (void *)srcData,
1229                                      (void *)dstData, numBytes) < 0) {
1230                 printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
1231                        __func__);
1232                 return -EINVAL;
1233         }
1234
1235         /* Remember the critical information for this transfer so that we can eliminate */
1236         /* another call to dma_alloc_descriptors if the caller reuses the same buffers */
1237
1238         devAttr->prevSrcData = srcData;
1239         devAttr->prevDstData = dstData;
1240         devAttr->prevNumBytes = numBytes;
1241
1242         return 0;
1243 }
1244
1245 EXPORT_SYMBOL(dma_alloc_descriptors);
1246
1247 /****************************************************************************/
1248 /**
1249 *   Allocates and sets up descriptors for a double buffered circular buffer.
1250 *
1251 *   This is primarily intended to be used for things like the ingress samples
1252 *   from a microphone.
1253 *
1254 *   @return
1255 *       > 0     Number of descriptors actually allocated.
1256 *       -EINVAL Invalid device type for this kind of transfer
1257 *               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
1258 *       -ENOMEM Memory exhausted
1259 */
1260 /****************************************************************************/
1261
1262 int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,       /* DMA Handle */
1263                                      dma_addr_t srcData,        /* Physical address of source data */
1264                                      dma_addr_t dstData1,       /* Physical address of first destination buffer */
1265                                      dma_addr_t dstData2,       /* Physical address of second destination buffer */
1266                                      size_t numBytes    /* Number of bytes in each destination buffer */
1267     ) {
1268         DMA_Channel_t *channel;
1269         DMA_DeviceAttribute_t *devAttr;
1270         int numDst1Descriptors;
1271         int numDst2Descriptors;
1272         int numDescriptors;
1273         size_t ringBytesRequired;
1274         int rc = 0;
1275
1276         channel = HandleToChannel(handle);
1277         if (channel == NULL) {
1278                 return -ENODEV;
1279         }
1280
1281         devAttr = &DMA_gDeviceAttribute[channel->devType];
1282
1283         /* Figure out how many descriptors we need. */
1284
1285         /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
1286         /*        srcData, dstData, numBytes); */
1287
1288         numDst1Descriptors =
1289              dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
1290                                              (void *)dstData1, numBytes);
1291         if (numDst1Descriptors < 0) {
1292                 return -EINVAL;
1293         }
1294         numDst2Descriptors =
1295              dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
1296                                              (void *)dstData2, numBytes);
1297         if (numDst2Descriptors < 0) {
1298                 return -EINVAL;
1299         }
1300         numDescriptors = numDst1Descriptors + numDst2Descriptors;
1301         /* printk("numDescriptors: %d\n", numDescriptors); */
1302
1303         /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
1304         /* a new one. */
1305
1306         ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
1307
1308         /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
1309
1310         if (ringBytesRequired > devAttr->ring.bytesAllocated) {
1311                 /* Make sure that this code path is never taken from interrupt context. */
1312                 /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
1313                 /* allocation needs to have already been done. */
1314
1315                 might_sleep();
1316
1317                 /* Free the old descriptor ring and allocate a new one. */
1318
1319                 dma_free_descriptor_ring(&devAttr->ring);
1320
1321                 /* And allocate a new one. */
1322
1323                 rc =
1324                      dma_alloc_descriptor_ring(&devAttr->ring,
1325                                                numDescriptors);
1326                 if (rc < 0) {
1327                         printk(KERN_ERR
1328                                "%s: dma_alloc_descriptor_ring(%d) failed\n",
1329                                __func__, ringBytesRequired);
1330                         return rc;
1331                 }
1332         }
1333
1334         /* Setup the descriptor for this transfer. Since this function is used with */
1335         /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
1336         /* setDataDescriptor will keep trying to append onto the end. */
1337
1338         if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
1339                                   devAttr->ring.physAddr,
1340                                   devAttr->ring.bytesAllocated,
1341                                   numDescriptors) < 0) {
1342                 printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
1343                 return -EINVAL;
1344         }
1345
1346         /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
1347         /* as last time, then we don't need to call setDataDescriptor again. */
1348
1349         if (dmacHw_setDataDescriptor(&devAttr->config,
1350                                      devAttr->ring.virtAddr,
1351                                      (void *)srcData,
1352                                      (void *)dstData1, numBytes) < 0) {
1353                 printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
1354                        __func__);
1355                 return -EINVAL;
1356         }
1357         if (dmacHw_setDataDescriptor(&devAttr->config,
1358                                      devAttr->ring.virtAddr,
1359                                      (void *)srcData,
1360                                      (void *)dstData2, numBytes) < 0) {
1361                 printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
1362                        __func__);
1363                 return -EINVAL;
1364         }
1365
1366         /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
1367         /* try to make the 'prev' variables right. */
1368
1369         devAttr->prevSrcData = 0;
1370         devAttr->prevDstData = 0;
1371         devAttr->prevNumBytes = 0;
1372
1373         return numDescriptors;
1374 }
1375
1376 EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
1377
1378 /****************************************************************************/
1379 /**
1380 *   Initiates a transfer when the descriptors have already been setup.
1381 *
1382 *   This is a special case, and normally, the dma_transfer_xxx functions should
1383 *   be used.
1384 *
1385 *   @return
1386 *       0       Transfer was started successfully
1387 *       -ENODEV Invalid handle
1388 */
1389 /****************************************************************************/
1390
1391 int dma_start_transfer(DMA_Handle_t handle)
1392 {
1393         DMA_Channel_t *channel;
1394         DMA_DeviceAttribute_t *devAttr;
1395
1396         channel = HandleToChannel(handle);
1397         if (channel == NULL) {
1398                 return -ENODEV;
1399         }
1400         devAttr = &DMA_gDeviceAttribute[channel->devType];
1401
1402         dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
1403                                 devAttr->ring.virtAddr);
1404
1405         /* Since we got this far, everything went successfully */
1406
1407         return 0;
1408 }
1409
1410 EXPORT_SYMBOL(dma_start_transfer);
1411
1412 /****************************************************************************/
1413 /**
1414 *   Stops a previously started DMA transfer.
1415 *
1416 *   @return
1417 *       0       Transfer was stopped successfully
1418 *       -ENODEV Invalid handle
1419 */
1420 /****************************************************************************/
1421
1422 int dma_stop_transfer(DMA_Handle_t handle)
1423 {
1424         DMA_Channel_t *channel;
1425
1426         channel = HandleToChannel(handle);
1427         if (channel == NULL) {
1428                 return -ENODEV;
1429         }
1430
1431         dmacHw_stopTransfer(channel->dmacHwHandle);
1432
1433         return 0;
1434 }
1435
1436 EXPORT_SYMBOL(dma_stop_transfer);
1437
1438 /****************************************************************************/
1439 /**
1440 *   Waits for a DMA to complete by polling. This function is only intended
1441 *   to be used for testing. Interrupts should be used for most DMA operations.
1442 */
1443 /****************************************************************************/
1444
1445 int dma_wait_transfer_done(DMA_Handle_t handle)
1446 {
1447         DMA_Channel_t *channel;
1448         dmacHw_TRANSFER_STATUS_e status;
1449
1450         channel = HandleToChannel(handle);
1451         if (channel == NULL) {
1452                 return -ENODEV;
1453         }
1454
1455         while ((status =
1456                 dmacHw_transferCompleted(channel->dmacHwHandle)) ==
1457                dmacHw_TRANSFER_STATUS_BUSY) {
1458                 ;
1459         }
1460
1461         if (status == dmacHw_TRANSFER_STATUS_ERROR) {
1462                 printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
1463                 return -EIO;
1464         }
1465         return 0;
1466 }
1467
1468 EXPORT_SYMBOL(dma_wait_transfer_done);
1469
1470 /****************************************************************************/
1471 /**
1472 *   Initiates a DMA, allocating the descriptors as required.
1473 *
1474 *   @return
1475 *       0       Transfer was started successfully
1476 *       -EINVAL Invalid device type for this kind of transfer
1477 *               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
1478 */
1479 /****************************************************************************/
1480
1481 int dma_transfer(DMA_Handle_t handle,   /* DMA Handle */
1482                  dmacHw_TRANSFER_TYPE_e transferType,   /* Type of transfer being performed */
1483                  dma_addr_t srcData,    /* Place to get data to write to device */
1484                  dma_addr_t dstData,    /* Pointer to device data address */
1485                  size_t numBytes        /* Number of bytes to transfer to the device */
1486     ) {
1487         DMA_Channel_t *channel;
1488         DMA_DeviceAttribute_t *devAttr;
1489         int rc = 0;
1490
1491         channel = HandleToChannel(handle);
1492         if (channel == NULL) {
1493                 return -ENODEV;
1494         }
1495
1496         devAttr = &DMA_gDeviceAttribute[channel->devType];
1497
1498         if (devAttr->config.transferType != transferType) {
1499                 return -EINVAL;
1500         }
1501
1502         /* We keep track of the information about the previous request for this */
1503         /* device, and if the attributes match, then we can use the descriptors we setup */
1504         /* the last time, and not have to reinitialize everything. */
1505
1506         {
1507                 rc =
1508                      dma_alloc_descriptors(handle, transferType, srcData,
1509                                            dstData, numBytes);
1510                 if (rc != 0) {
1511                         return rc;
1512                 }
1513         }
1514
1515         /* And kick off the transfer */
1516
1517         devAttr->numBytes = numBytes;
1518         devAttr->transferStartTime = timer_get_tick_count();
1519
1520         dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
1521                                 devAttr->ring.virtAddr);
1522
1523         /* Since we got this far, everything went successfully */
1524
1525         return 0;
1526 }
1527
1528 EXPORT_SYMBOL(dma_transfer);
1529
1530 /****************************************************************************/
1531 /**
1532 *   Set the callback function which will be called when a transfer completes.
1533 *   If a NULL callback function is set, then no callback will occur.
1534 *
1535 *   @note   @a devHandler will be called from IRQ context.
1536 *
1537 *   @return
1538 *       0       - Success
1539 *       -ENODEV - Device handed in is invalid.
1540 */
1541 /****************************************************************************/
1542
1543 int dma_set_device_handler(DMA_Device_t dev,    /* Device to set the callback for. */
1544                            DMA_DeviceHandler_t devHandler,      /* Function to call when the DMA completes */
1545                            void *userData       /* Pointer which will be passed to devHandler. */
1546     ) {
1547         DMA_DeviceAttribute_t *devAttr;
1548         unsigned long flags;
1549
1550         if (!IsDeviceValid(dev)) {
1551                 return -ENODEV;
1552         }
1553         devAttr = &DMA_gDeviceAttribute[dev];
1554
1555         local_irq_save(flags);
1556
1557         devAttr->userData = userData;
1558         devAttr->devHandler = devHandler;
1559
1560         local_irq_restore(flags);
1561
1562         return 0;
1563 }
1564
1565 EXPORT_SYMBOL(dma_set_device_handler);
1566
1567 /****************************************************************************/
1568 /**
1569 *   Initializes a memory mapping structure
1570 */
1571 /****************************************************************************/
1572
1573 int dma_init_mem_map(DMA_MemMap_t *memMap)
1574 {
1575         memset(memMap, 0, sizeof(*memMap));
1576
1577         sema_init(&memMap->lock, 1);
1578
1579         return 0;
1580 }
1581
1582 EXPORT_SYMBOL(dma_init_mem_map);
1583
1584 /****************************************************************************/
1585 /**
1586 *   Releases any memory currently being held by a memory mapping structure.
1587 */
1588 /****************************************************************************/
1589
1590 int dma_term_mem_map(DMA_MemMap_t *memMap)
1591 {
1592         down(&memMap->lock);    /* Just being paranoid */
1593
1594         /* Free up any allocated memory */
1595
1596         up(&memMap->lock);
1597         memset(memMap, 0, sizeof(*memMap));
1598
1599         return 0;
1600 }
1601
1602 EXPORT_SYMBOL(dma_term_mem_map);
1603
1604 /****************************************************************************/
1605 /**
1606 *   Looks at a memory address and categorizes it.
1607 *
1608 *   @return One of the values from the DMA_MemType_t enumeration.
1609 */
1610 /****************************************************************************/
1611
1612 DMA_MemType_t dma_mem_type(void *addr)
1613 {
1614         unsigned long addrVal = (unsigned long)addr;
1615
1616         if (addrVal >= VMALLOC_END) {
1617                 /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
1618
1619                 /* dma_alloc_xxx pages are physically and virtually contiguous */
1620
1621                 return DMA_MEM_TYPE_DMA;
1622         }
1623
1624         /* Technically, we could add one more classification. Addresses between VMALLOC_END */
1625         /* and the beginning of the DMA virtual address could be considered to be I/O space. */
1626         /* Right now, nobody cares about this particular classification, so we ignore it. */
1627
1628         if (is_vmalloc_addr(addr)) {
1629                 /* Address comes from the vmalloc'd region. Pages are virtually */
1630                 /* contiguous but NOT physically contiguous */
1631
1632                 return DMA_MEM_TYPE_VMALLOC;
1633         }
1634
1635         if (addrVal >= PAGE_OFFSET) {
1636                 /* PAGE_OFFSET is typically 0xC0000000 */
1637
1638                 /* kmalloc'd pages are physically contiguous */
1639
1640                 return DMA_MEM_TYPE_KMALLOC;
1641         }
1642
1643         return DMA_MEM_TYPE_USER;
1644 }
1645
1646 EXPORT_SYMBOL(dma_mem_type);
1647
1648 /****************************************************************************/
1649 /**
1650 *   Looks at a memory address and determines if we support DMA'ing to/from
1651 *   that type of memory.
1652 *
1653 *   @return boolean -
1654 *               return value != 0 means dma supported
1655 *               return value == 0 means dma not supported
1656 */
1657 /****************************************************************************/
1658
1659 int dma_mem_supports_dma(void *addr)
1660 {
1661         DMA_MemType_t memType = dma_mem_type(addr);
1662
1663         return (memType == DMA_MEM_TYPE_DMA)
1664 #if ALLOW_MAP_OF_KMALLOC_MEMORY
1665             || (memType == DMA_MEM_TYPE_KMALLOC)
1666 #endif
1667             || (memType == DMA_MEM_TYPE_USER);
1668 }
1669
1670 EXPORT_SYMBOL(dma_mem_supports_dma);
1671
1672 /****************************************************************************/
1673 /**
1674 *   Maps in a memory region such that it can be used for performing a DMA.
1675 *
1676 *   @return
1677 */
1678 /****************************************************************************/
1679
1680 int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
1681                   enum dma_data_direction dir   /* Direction that the mapping will be going */
1682     ) {
1683         int rc;
1684
1685         down(&memMap->lock);
1686
1687         DMA_MAP_PRINT("memMap: %p\n", memMap);
1688
1689         if (memMap->inUse) {
1690                 printk(KERN_ERR "%s: memory map %p is already being used\n",
1691                        __func__, memMap);
1692                 rc = -EBUSY;
1693                 goto out;
1694         }
1695
1696         memMap->inUse = 1;
1697         memMap->dir = dir;
1698         memMap->numRegionsUsed = 0;
1699
1700         rc = 0;
1701
1702 out:
1703
1704         DMA_MAP_PRINT("returning %d", rc);
1705
1706         up(&memMap->lock);
1707
1708         return rc;
1709 }
1710
1711 EXPORT_SYMBOL(dma_map_start);
1712
1713 /****************************************************************************/
1714 /**
1715 *   Adds a segment of memory to a memory map. Each segment is both
1716 *   physically and virtually contiguous.
1717 *
1718 *   @return     0 on success, error code otherwise.
1719 */
1720 /****************************************************************************/
1721
1722 static int dma_map_add_segment(DMA_MemMap_t *memMap,    /* Stores state information about the map */
1723                                DMA_Region_t *region,    /* Region that the segment belongs to */
1724                                void *virtAddr,  /* Virtual address of the segment being added */
1725                                dma_addr_t physAddr,     /* Physical address of the segment being added */
1726                                size_t numBytes  /* Number of bytes of the segment being added */
1727     ) {
1728         DMA_Segment_t *segment;
1729
1730         DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
1731                       physAddr, numBytes);
1732
1733         /* Sanity check */
1734
1735         if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
1736             || (((unsigned long)virtAddr + numBytes)) >
1737             ((unsigned long)region->virtAddr + region->numBytes)) {
1738                 printk(KERN_ERR
1739                        "%s: virtAddr %p is outside region @ %p len: %d\n",
1740                        __func__, virtAddr, region->virtAddr, region->numBytes);
1741                 return -EINVAL;
1742         }
1743
1744         if (region->numSegmentsUsed > 0) {
1745                 /* Check to see if this segment is physically contiguous with the previous one */
1746
1747                 segment = &region->segment[region->numSegmentsUsed - 1];
1748
1749                 if ((segment->physAddr + segment->numBytes) == physAddr) {
1750                         /* It is - just add on to the end */
1751
1752                         DMA_MAP_PRINT("appending %d bytes to last segment\n",
1753                                       numBytes);
1754
1755                         segment->numBytes += numBytes;
1756
1757                         return 0;
1758                 }
1759         }
1760
1761         /* Reallocate to hold more segments, if required. */
1762
1763         if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
1764                 DMA_Segment_t *newSegment;
1765                 size_t oldSize =
1766                     region->numSegmentsAllocated * sizeof(*newSegment);
1767                 int newAlloc = region->numSegmentsAllocated + 4;
1768                 size_t newSize = newAlloc * sizeof(*newSegment);
1769
1770                 newSegment = kmalloc(newSize, GFP_KERNEL);
1771                 if (newSegment == NULL) {
1772                         return -ENOMEM;
1773                 }
1774                 memcpy(newSegment, region->segment, oldSize);
1775                 memset(&((uint8_t *) newSegment)[oldSize], 0,
1776                        newSize - oldSize);
1777                 kfree(region->segment);
1778
1779                 region->numSegmentsAllocated = newAlloc;
1780                 region->segment = newSegment;
1781         }
1782
1783         segment = &region->segment[region->numSegmentsUsed];
1784         region->numSegmentsUsed++;
1785
1786         segment->virtAddr = virtAddr;
1787         segment->physAddr = physAddr;
1788         segment->numBytes = numBytes;
1789
1790         DMA_MAP_PRINT("returning success\n");
1791
1792         return 0;
1793 }
1794
1795 /****************************************************************************/
1796 /**
1797 *   Adds a region of memory to a memory map. Each region is virtually
1798 *   contiguous, but not necessarily physically contiguous.
1799 *
1800 *   @return     0 on success, error code otherwise.
1801 */
1802 /****************************************************************************/
1803
1804 int dma_map_add_region(DMA_MemMap_t *memMap,    /* Stores state information about the map */
1805                        void *mem,       /* Virtual address that we want to get a map of */
1806                        size_t numBytes  /* Number of bytes being mapped */
1807     ) {
1808         unsigned long addr = (unsigned long)mem;
1809         unsigned int offset;
1810         int rc = 0;
1811         DMA_Region_t *region;
1812         dma_addr_t physAddr;
1813
1814         down(&memMap->lock);
1815
1816         DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
1817
1818         if (!memMap->inUse) {
1819                 printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
1820                        __func__);
1821                 rc = -EINVAL;
1822                 goto out;
1823         }
1824
1825         /* Reallocate to hold more regions. */
1826
1827         if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
1828                 DMA_Region_t *newRegion;
1829                 size_t oldSize =
1830                     memMap->numRegionsAllocated * sizeof(*newRegion);
1831                 int newAlloc = memMap->numRegionsAllocated + 4;
1832                 size_t newSize = newAlloc * sizeof(*newRegion);
1833
1834                 newRegion = kmalloc(newSize, GFP_KERNEL);
1835                 if (newRegion == NULL) {
1836                         rc = -ENOMEM;
1837                         goto out;
1838                 }
1839                 memcpy(newRegion, memMap->region, oldSize);
1840                 memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
1841
1842                 kfree(memMap->region);
1843
1844                 memMap->numRegionsAllocated = newAlloc;
1845                 memMap->region = newRegion;
1846         }
1847
1848         region = &memMap->region[memMap->numRegionsUsed];
1849         memMap->numRegionsUsed++;
1850
1851         offset = addr & ~PAGE_MASK;
1852
1853         region->memType = dma_mem_type(mem);
1854         region->virtAddr = mem;
1855         region->numBytes = numBytes;
1856         region->numSegmentsUsed = 0;
1857         region->numLockedPages = 0;
1858         region->lockedPages = NULL;
1859
1860         switch (region->memType) {
1861         case DMA_MEM_TYPE_VMALLOC:
1862                 {
1863                         atomic_inc(&gDmaStatMemTypeVmalloc);
1864
1865                         /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
1866
1867                         /* vmalloc'd pages are not physically contiguous */
1868
1869                         rc = -EINVAL;
1870                         break;
1871                 }
1872
1873         case DMA_MEM_TYPE_KMALLOC:
1874                 {
1875                         atomic_inc(&gDmaStatMemTypeKmalloc);
1876
1877                         /* kmalloc'd pages are physically contiguous, so they'll have exactly */
1878                         /* one segment */
1879
1880 #if ALLOW_MAP_OF_KMALLOC_MEMORY
1881                         physAddr =
1882                             dma_map_single(NULL, mem, numBytes, memMap->dir);
1883                         rc = dma_map_add_segment(memMap, region, mem, physAddr,
1884                                                  numBytes);
1885 #else
1886                         rc = -EINVAL;
1887 #endif
1888                         break;
1889                 }
1890
1891         case DMA_MEM_TYPE_DMA:
1892                 {
1893                         /* dma_alloc_xxx pages are physically contiguous */
1894
1895                         atomic_inc(&gDmaStatMemTypeCoherent);
1896
1897                         physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
1898
1899                         dma_sync_single_for_cpu(NULL, physAddr, numBytes,
1900                                                 memMap->dir);
1901                         rc = dma_map_add_segment(memMap, region, mem, physAddr,
1902                                                  numBytes);
1903                         break;
1904                 }
1905
1906         case DMA_MEM_TYPE_USER:
1907                 {
1908                         size_t firstPageOffset;
1909                         size_t firstPageSize;
1910                         struct page **pages;
1911                         struct task_struct *userTask;
1912
1913                         atomic_inc(&gDmaStatMemTypeUser);
1914
1915 #if 1
1916                         /* If the pages are user pages, then the dma_mem_map_set_user_task function */
1917                         /* must have been previously called. */
1918
1919                         if (memMap->userTask == NULL) {
1920                                 printk(KERN_ERR
1921                                        "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
1922                                        __func__);
1923                                 return -EINVAL;
1924                         }
1925
1926                         /* User pages need to be locked. */
1927
1928                         firstPageOffset =
1929                             (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
1930                         firstPageSize = PAGE_SIZE - firstPageOffset;
1931
1932                         region->numLockedPages = (firstPageOffset
1933                                                   + region->numBytes +
1934                                                   PAGE_SIZE - 1) / PAGE_SIZE;
1935                         pages =
1936                             kmalloc(region->numLockedPages *
1937                                     sizeof(struct page *), GFP_KERNEL);
1938
1939                         if (pages == NULL) {
1940                                 region->numLockedPages = 0;
1941                                 return -ENOMEM;
1942                         }
1943
1944                         userTask = memMap->userTask;
1945
1946                         down_read(&userTask->mm->mmap_sem);
1947                         rc = get_user_pages(userTask,   /* task */
1948                                             userTask->mm,       /* mm */
1949                                             (unsigned long)region->virtAddr,    /* start */
1950                                             region->numLockedPages,     /* len */
1951                                             memMap->dir == DMA_FROM_DEVICE,     /* write */
1952                                             0,  /* force */
1953                                             pages,      /* pages (array of pointers to page) */
1954                                             NULL);      /* vmas */
1955                         up_read(&userTask->mm->mmap_sem);
1956
1957                         if (rc != region->numLockedPages) {
1958                                 kfree(pages);
1959                                 region->numLockedPages = 0;
1960
1961                                 if (rc >= 0) {
1962                                         rc = -EINVAL;
1963                                 }
1964                         } else {
1965                                 uint8_t *virtAddr = region->virtAddr;
1966                                 size_t bytesRemaining;
1967                                 int pageIdx;
1968
1969                                 rc = 0; /* Since get_user_pages returns +ve number */
1970
1971                                 region->lockedPages = pages;
1972
1973                                 /* We've locked the user pages. Now we need to walk them and figure */
1974                                 /* out the physical addresses. */
1975
1976                                 /* The first page may be partial */
1977
1978                                 dma_map_add_segment(memMap,
1979                                                     region,
1980                                                     virtAddr,
1981                                                     PFN_PHYS(page_to_pfn
1982                                                              (pages[0])) +
1983                                                     firstPageOffset,
1984                                                     firstPageSize);
1985
1986                                 virtAddr += firstPageSize;
1987                                 bytesRemaining =
1988                                     region->numBytes - firstPageSize;
1989
1990                                 for (pageIdx = 1;
1991                                      pageIdx < region->numLockedPages;
1992                                      pageIdx++) {
1993                                         size_t bytesThisPage =
1994                                             (bytesRemaining >
1995                                              PAGE_SIZE ? PAGE_SIZE :
1996                                              bytesRemaining);
1997
1998                                         DMA_MAP_PRINT
1999                                             ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
2000                                              pageIdx, pages[pageIdx],
2001                                              page_to_pfn(pages[pageIdx]),
2002                                              PFN_PHYS(page_to_pfn
2003                                                       (pages[pageIdx])));
2004
2005                                         dma_map_add_segment(memMap,
2006                                                             region,
2007                                                             virtAddr,
2008                                                             PFN_PHYS(page_to_pfn
2009                                                                      (pages
2010                                                                       [pageIdx])),
2011                                                             bytesThisPage);
2012
2013                                         virtAddr += bytesThisPage;
2014                                         bytesRemaining -= bytesThisPage;
2015                                 }
2016                         }
2017 #else
2018                         printk(KERN_ERR
2019                                "%s: User mode pages are not yet supported\n",
2020                                __func__);
2021
2022                         /* user pages are not physically contiguous */
2023
2024                         rc = -EINVAL;
2025 #endif
2026                         break;
2027                 }
2028
2029         default:
2030                 {
2031                         printk(KERN_ERR "%s: Unsupported memory type: %d\n",
2032                                __func__, region->memType);
2033
2034                         rc = -EINVAL;
2035                         break;
2036                 }
2037         }
2038
2039         if (rc != 0) {
2040                 memMap->numRegionsUsed--;
2041         }
2042
2043 out:
2044
2045         DMA_MAP_PRINT("returning %d\n", rc);
2046
2047         up(&memMap->lock);
2048
2049         return rc;
2050 }
2051
2052 EXPORT_SYMBOL(dma_map_add_segment);
2053
2054 /****************************************************************************/
2055 /**
2056 *   Maps in a memory region such that it can be used for performing a DMA.
2057 *
2058 *   @return     0 on success, error code otherwise.
2059 */
2060 /****************************************************************************/
2061
2062 int dma_map_mem(DMA_MemMap_t *memMap,   /* Stores state information about the map */
2063                 void *mem,      /* Virtual address that we want to get a map of */
2064                 size_t numBytes,        /* Number of bytes being mapped */
2065                 enum dma_data_direction dir     /* Direction that the mapping will be going */
2066     ) {
2067         int rc;
2068
2069         rc = dma_map_start(memMap, dir);
2070         if (rc == 0) {
2071                 rc = dma_map_add_region(memMap, mem, numBytes);
2072                 if (rc < 0) {
2073                         /* Since the add fails, this function will fail, and the caller won't */
2074                         /* call unmap, so we need to do it here. */
2075
2076                         dma_unmap(memMap, 0);
2077                 }
2078         }
2079
2080         return rc;
2081 }
2082
2083 EXPORT_SYMBOL(dma_map_mem);
2084
2085 /****************************************************************************/
2086 /**
2087 *   Setup a descriptor ring for a given memory map.
2088 *
2089 *   It is assumed that the descriptor ring has already been initialized, and
2090 *   this routine will only reallocate a new descriptor ring if the existing
2091 *   one is too small.
2092 *
2093 *   @return     0 on success, error code otherwise.
2094 */
2095 /****************************************************************************/
2096
2097 int dma_map_create_descriptor_ring(DMA_Device_t dev,    /* DMA device (where the ring is stored) */
2098                                    DMA_MemMap_t *memMap,        /* Memory map that will be used */
2099                                    dma_addr_t devPhysAddr       /* Physical address of device */
2100     ) {
2101         int rc;
2102         int numDescriptors;
2103         DMA_DeviceAttribute_t *devAttr;
2104         DMA_Region_t *region;
2105         DMA_Segment_t *segment;
2106         dma_addr_t srcPhysAddr;
2107         dma_addr_t dstPhysAddr;
2108         int regionIdx;
2109         int segmentIdx;
2110
2111         devAttr = &DMA_gDeviceAttribute[dev];
2112
2113         down(&memMap->lock);
2114
2115         /* Figure out how many descriptors we need */
2116
2117         numDescriptors = 0;
2118         for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
2119                 region = &memMap->region[regionIdx];
2120
2121                 for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
2122                      segmentIdx++) {
2123                         segment = &region->segment[segmentIdx];
2124
2125                         if (memMap->dir == DMA_TO_DEVICE) {
2126                                 srcPhysAddr = segment->physAddr;
2127                                 dstPhysAddr = devPhysAddr;
2128                         } else {
2129                                 srcPhysAddr = devPhysAddr;
2130                                 dstPhysAddr = segment->physAddr;
2131                         }
2132
2133                         rc =
2134                              dma_calculate_descriptor_count(dev, srcPhysAddr,
2135                                                             dstPhysAddr,
2136                                                             segment->
2137                                                             numBytes);
2138                         if (rc < 0) {
2139                                 printk(KERN_ERR
2140                                        "%s: dma_calculate_descriptor_count failed: %d\n",
2141                                        __func__, rc);
2142                                 goto out;
2143                         }
2144                         numDescriptors += rc;
2145                 }
2146         }
2147
2148         /* Adjust the size of the ring, if it isn't big enough */
2149
2150         if (numDescriptors > devAttr->ring.descriptorsAllocated) {
2151                 dma_free_descriptor_ring(&devAttr->ring);
2152                 rc =
2153                      dma_alloc_descriptor_ring(&devAttr->ring,
2154                                                numDescriptors);
2155                 if (rc < 0) {
2156                         printk(KERN_ERR
2157                                "%s: dma_alloc_descriptor_ring failed: %d\n",
2158                                __func__, rc);
2159                         goto out;
2160                 }
2161         } else {
2162                 rc =
2163                      dma_init_descriptor_ring(&devAttr->ring,
2164                                               numDescriptors);
2165                 if (rc < 0) {
2166                         printk(KERN_ERR
2167                                "%s: dma_init_descriptor_ring failed: %d\n",
2168                                __func__, rc);
2169                         goto out;
2170                 }
2171         }
2172
2173         /* Populate the descriptors */
2174
2175         for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
2176                 region = &memMap->region[regionIdx];
2177
2178                 for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
2179                      segmentIdx++) {
2180                         segment = &region->segment[segmentIdx];
2181
2182                         if (memMap->dir == DMA_TO_DEVICE) {
2183                                 srcPhysAddr = segment->physAddr;
2184                                 dstPhysAddr = devPhysAddr;
2185                         } else {
2186                                 srcPhysAddr = devPhysAddr;
2187                                 dstPhysAddr = segment->physAddr;
2188                         }
2189
2190                         rc =
2191                              dma_add_descriptors(&devAttr->ring, dev,
2192                                                  srcPhysAddr, dstPhysAddr,
2193                                                  segment->numBytes);
2194                         if (rc < 0) {
2195                                 printk(KERN_ERR
2196                                        "%s: dma_add_descriptors failed: %d\n",
2197                                        __func__, rc);
2198                                 goto out;
2199                         }
2200                 }
2201         }
2202
2203         rc = 0;
2204
2205 out:
2206
2207         up(&memMap->lock);
2208         return rc;
2209 }
2210
2211 EXPORT_SYMBOL(dma_map_create_descriptor_ring);
2212
2213 /****************************************************************************/
2214 /**
2215 *   Maps in a memory region such that it can be used for performing a DMA.
2216 *
2217 *   @return
2218 */
2219 /****************************************************************************/
2220
2221 int dma_unmap(DMA_MemMap_t *memMap,     /* Stores state information about the map */
2222               int dirtied       /* non-zero if any of the pages were modified */
2223     ) {
2224
2225         int rc = 0;
2226         int regionIdx;
2227         int segmentIdx;
2228         DMA_Region_t *region;
2229         DMA_Segment_t *segment;
2230
2231         down(&memMap->lock);
2232
2233         for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
2234                 region = &memMap->region[regionIdx];
2235
2236                 for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
2237                      segmentIdx++) {
2238                         segment = &region->segment[segmentIdx];
2239
2240                         switch (region->memType) {
2241                         case DMA_MEM_TYPE_VMALLOC:
2242                                 {
2243                                         printk(KERN_ERR
2244                                                "%s: vmalloc'd pages are not yet supported\n",
2245                                                __func__);
2246                                         rc = -EINVAL;
2247                                         goto out;
2248                                 }
2249
2250                         case DMA_MEM_TYPE_KMALLOC:
2251                                 {
2252 #if ALLOW_MAP_OF_KMALLOC_MEMORY
2253                                         dma_unmap_single(NULL,
2254                                                          segment->physAddr,
2255                                                          segment->numBytes,
2256                                                          memMap->dir);
2257 #endif
2258                                         break;
2259                                 }
2260
2261                         case DMA_MEM_TYPE_DMA:
2262                                 {
2263                                         dma_sync_single_for_cpu(NULL,
2264                                                                 segment->
2265                                                                 physAddr,
2266                                                                 segment->
2267                                                                 numBytes,
2268                                                                 memMap->dir);
2269                                         break;
2270                                 }
2271
2272                         case DMA_MEM_TYPE_USER:
2273                                 {
2274                                         /* Nothing to do here. */
2275
2276                                         break;
2277                                 }
2278
2279                         default:
2280                                 {
2281                                         printk(KERN_ERR
2282                                                "%s: Unsupported memory type: %d\n",
2283                                                __func__, region->memType);
2284                                         rc = -EINVAL;
2285                                         goto out;
2286                                 }
2287                         }
2288
2289                         segment->virtAddr = NULL;
2290                         segment->physAddr = 0;
2291                         segment->numBytes = 0;
2292                 }
2293
2294                 if (region->numLockedPages > 0) {
2295                         int pageIdx;
2296
2297                         /* Some user pages were locked. We need to go and unlock them now. */
2298
2299                         for (pageIdx = 0; pageIdx < region->numLockedPages;
2300                              pageIdx++) {
2301                                 struct page *page =
2302                                     region->lockedPages[pageIdx];
2303
2304                                 if (memMap->dir == DMA_FROM_DEVICE) {
2305                                         SetPageDirty(page);
2306                                 }
2307                                 page_cache_release(page);
2308                         }
2309                         kfree(region->lockedPages);
2310                         region->numLockedPages = 0;
2311                         region->lockedPages = NULL;
2312                 }
2313
2314                 region->memType = DMA_MEM_TYPE_NONE;
2315                 region->virtAddr = NULL;
2316                 region->numBytes = 0;
2317                 region->numSegmentsUsed = 0;
2318         }
2319         memMap->userTask = NULL;
2320         memMap->numRegionsUsed = 0;
2321         memMap->inUse = 0;
2322
2323 out:
2324         up(&memMap->lock);
2325
2326         return rc;
2327 }
2328
2329 EXPORT_SYMBOL(dma_unmap);