arch/arm/mach-at91/at91rm9200_devices.c

   1 /*
   2  * arch/arm/mach-at91/at91rm9200_devices.c
   3  *
   4  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   5  *  Copyright (C) 2005 David Brownell
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  */
  13 #include <asm/mach/arch.h>
  14 #include <asm/mach/map.h>
  15
  16 #include <linux/dma-mapping.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/i2c-gpio.h>
  19
  20 #include <mach/board.h>
  21 #include <mach/gpio.h>
  22 #include <mach/at91rm9200.h>
  23 #include <mach/at91rm9200_mc.h>
  24
  25 #include "generic.h"
  26
  27
  28 /* --------------------------------------------------------------------
  29  *  USB Host
  30  * -------------------------------------------------------------------- */
  31
  32 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  33 static u64 ohci_dmamask = DMA_BIT_MASK(32);
  34 static struct at91_usbh_data usbh_data;
  35
  36 static struct resource usbh_resources[] = {
  37         [0] = {
  38                 .start  = AT91RM9200_UHP_BASE,
  39                 .end    = AT91RM9200_UHP_BASE + SZ_1M - 1,
  40                 .flags  = IORESOURCE_MEM,
  41         },
  42         [1] = {
  43                 .start  = AT91RM9200_ID_UHP,
  44                 .end    = AT91RM9200_ID_UHP,
  45                 .flags  = IORESOURCE_IRQ,
  46         },
  47 };
  48
  49 static struct platform_device at91rm9200_usbh_device = {
  50         .name           = "at91_ohci",
  51         .id             = -1,
  52         .dev            = {
  53                                 .dma_mask               = &ohci_dmamask,
  54                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
  55                                 .platform_data          = &usbh_data,
  56         },
  57         .resource       = usbh_resources,
  58         .num_resources  = ARRAY_SIZE(usbh_resources),
  59 };
  60
  61 void __init at91_add_device_usbh(struct at91_usbh_data *data)
  62 {
  63         if (!data)
  64                 return;
  65
  66         usbh_data = *data;
  67         platform_device_register(&at91rm9200_usbh_device);
  68 }
  69 #else
  70 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  71 #endif
  72
  73
  74 /* --------------------------------------------------------------------
  75  *  USB Device (Gadget)
  76  * -------------------------------------------------------------------- */
  77
  78 #ifdef CONFIG_USB_GADGET_AT91
  79 static struct at91_udc_data udc_data;
  80
  81 static struct resource udc_resources[] = {
  82         [0] = {
  83                 .start  = AT91RM9200_BASE_UDP,
  84                 .end    = AT91RM9200_BASE_UDP + SZ_16K - 1,
  85                 .flags  = IORESOURCE_MEM,
  86         },
  87         [1] = {
  88                 .start  = AT91RM9200_ID_UDP,
  89                 .end    = AT91RM9200_ID_UDP,
  90                 .flags  = IORESOURCE_IRQ,
  91         },
  92 };
  93
  94 static struct platform_device at91rm9200_udc_device = {
  95         .name           = "at91_udc",
  96         .id             = -1,
  97         .dev            = {
  98                                 .platform_data          = &udc_data,
  99         },
 100         .resource       = udc_resources,
 101         .num_resources  = ARRAY_SIZE(udc_resources),
 102 };
 103
 104 void __init at91_add_device_udc(struct at91_udc_data *data)
 105 {
 106         if (!data)
 107                 return;
 108
 109         if (data->vbus_pin) {
 110                 at91_set_gpio_input(data->vbus_pin, 0);
 111                 at91_set_deglitch(data->vbus_pin, 1);
 112         }
 113         if (data->pullup_pin)
 114                 at91_set_gpio_output(data->pullup_pin, 0);
 115
 116         udc_data = *data;
 117         platform_device_register(&at91rm9200_udc_device);
 118 }
 119 #else
 120 void __init at91_add_device_udc(struct at91_udc_data *data) {}
 121 #endif
 122
 123
 124 /* --------------------------------------------------------------------
 125  *  Ethernet
 126  * -------------------------------------------------------------------- */
 127
 128 #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
 129 static u64 eth_dmamask = DMA_BIT_MASK(32);
 130 static struct at91_eth_data eth_data;
 131
 132 static struct resource eth_resources[] = {
 133         [0] = {
 134                 .start  = AT91_VA_BASE_EMAC,
 135                 .end    = AT91_VA_BASE_EMAC + SZ_16K - 1,
 136                 .flags  = IORESOURCE_MEM,
 137         },
 138         [1] = {
 139                 .start  = AT91RM9200_ID_EMAC,
 140                 .end    = AT91RM9200_ID_EMAC,
 141                 .flags  = IORESOURCE_IRQ,
 142         },
 143 };
 144
 145 static struct platform_device at91rm9200_eth_device = {
 146         .name           = "at91_ether",
 147         .id             = -1,
 148         .dev            = {
 149                                 .dma_mask               = &eth_dmamask,
 150                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 151                                 .platform_data          = &eth_data,
 152         },
 153         .resource       = eth_resources,
 154         .num_resources  = ARRAY_SIZE(eth_resources),
 155 };
 156
 157 void __init at91_add_device_eth(struct at91_eth_data *data)
 158 {
 159         if (!data)
 160                 return;
 161
 162         if (data->phy_irq_pin) {
 163                 at91_set_gpio_input(data->phy_irq_pin, 0);
 164                 at91_set_deglitch(data->phy_irq_pin, 1);
 165         }
 166
 167         /* Pins used for MII and RMII */
 168         at91_set_A_periph(AT91_PIN_PA16, 0);    /* EMDIO */
 169         at91_set_A_periph(AT91_PIN_PA15, 0);    /* EMDC */
 170         at91_set_A_periph(AT91_PIN_PA14, 0);    /* ERXER */
 171         at91_set_A_periph(AT91_PIN_PA13, 0);    /* ERX1 */
 172         at91_set_A_periph(AT91_PIN_PA12, 0);    /* ERX0 */
 173         at91_set_A_periph(AT91_PIN_PA11, 0);    /* ECRS_ECRSDV */
 174         at91_set_A_periph(AT91_PIN_PA10, 0);    /* ETX1 */
 175         at91_set_A_periph(AT91_PIN_PA9, 0);     /* ETX0 */
 176         at91_set_A_periph(AT91_PIN_PA8, 0);     /* ETXEN */
 177         at91_set_A_periph(AT91_PIN_PA7, 0);     /* ETXCK_EREFCK */
 178
 179         if (!data->is_rmii) {
 180                 at91_set_B_periph(AT91_PIN_PB19, 0);    /* ERXCK */
 181                 at91_set_B_periph(AT91_PIN_PB18, 0);    /* ECOL */
 182                 at91_set_B_periph(AT91_PIN_PB17, 0);    /* ERXDV */
 183                 at91_set_B_periph(AT91_PIN_PB16, 0);    /* ERX3 */
 184                 at91_set_B_periph(AT91_PIN_PB15, 0);    /* ERX2 */
 185                 at91_set_B_periph(AT91_PIN_PB14, 0);    /* ETXER */
 186                 at91_set_B_periph(AT91_PIN_PB13, 0);    /* ETX3 */
 187                 at91_set_B_periph(AT91_PIN_PB12, 0);    /* ETX2 */
 188         }
 189
 190         eth_data = *data;
 191         platform_device_register(&at91rm9200_eth_device);
 192 }
 193 #else
 194 void __init at91_add_device_eth(struct at91_eth_data *data) {}
 195 #endif
 196
 197
 198 /* --------------------------------------------------------------------
 199  *  Compact Flash / PCMCIA
 200  * -------------------------------------------------------------------- */
 201
 202 #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 203 static struct at91_cf_data cf_data;
 204
 205 #define CF_BASE         AT91_CHIPSELECT_4
 206
 207 static struct resource cf_resources[] = {
 208         [0] = {
 209                 .start  = CF_BASE,
 210                 /* ties up CS4, CS5 and CS6 */
 211                 .end    = CF_BASE + (0x30000000 - 1),
 212                 .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 213         },
 214 };
 215
 216 static struct platform_device at91rm9200_cf_device = {
 217         .name           = "at91_cf",
 218         .id             = -1,
 219         .dev            = {
 220                                 .platform_data          = &cf_data,
 221         },
 222         .resource       = cf_resources,
 223         .num_resources  = ARRAY_SIZE(cf_resources),
 224 };
 225
 226 void __init at91_add_device_cf(struct at91_cf_data *data)
 227 {
 228         unsigned int csa;
 229
 230         if (!data)
 231                 return;
 232
 233         data->chipselect = 4;           /* can only use EBI ChipSelect 4 */
 234
 235         /* CF takes over CS4, CS5, CS6 */
 236         csa = at91_sys_read(AT91_EBI_CSA);
 237         at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
 238
 239         /*
 240          * Static memory controller timing adjustments.
 241          * REVISIT:  these timings are in terms of MCK cycles, so
 242          * when MCK changes (cpufreq etc) so must these values...
 243          */
 244         at91_sys_write(AT91_SMC_CSR(4),
 245                                   AT91_SMC_ACSS_STD
 246                                 | AT91_SMC_DBW_16
 247                                 | AT91_SMC_BAT
 248                                 | AT91_SMC_WSEN
 249                                 | AT91_SMC_NWS_(32)     /* wait states */
 250                                 | AT91_SMC_RWSETUP_(6)  /* setup time */
 251                                 | AT91_SMC_RWHOLD_(4)   /* hold time */
 252         );
 253
 254         /* input/irq */
 255         if (data->irq_pin) {
 256                 at91_set_gpio_input(data->irq_pin, 1);
 257                 at91_set_deglitch(data->irq_pin, 1);
 258         }
 259         at91_set_gpio_input(data->det_pin, 1);
 260         at91_set_deglitch(data->det_pin, 1);
 261
 262         /* outputs, initially off */
 263         if (data->vcc_pin)
 264                 at91_set_gpio_output(data->vcc_pin, 0);
 265         at91_set_gpio_output(data->rst_pin, 0);
 266
 267         /* force poweron defaults for these pins ... */
 268         at91_set_A_periph(AT91_PIN_PC9, 0);     /* A25/CFRNW */
 269         at91_set_A_periph(AT91_PIN_PC10, 0);    /* NCS4/CFCS */
 270         at91_set_A_periph(AT91_PIN_PC11, 0);    /* NCS5/CFCE1 */
 271         at91_set_A_periph(AT91_PIN_PC12, 0);    /* NCS6/CFCE2 */
 272
 273         /* nWAIT is _not_ a default setting */
 274         at91_set_A_periph(AT91_PIN_PC6, 1);     /* nWAIT */
 275
 276         cf_data = *data;
 277         platform_device_register(&at91rm9200_cf_device);
 278 }
 279 #else
 280 void __init at91_add_device_cf(struct at91_cf_data *data) {}
 281 #endif
 282
 283
 284 /* --------------------------------------------------------------------
 285  *  MMC / SD
 286  * -------------------------------------------------------------------- */
 287
 288 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 289 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 290 static struct at91_mmc_data mmc_data;
 291
 292 static struct resource mmc_resources[] = {
 293         [0] = {
 294                 .start  = AT91RM9200_BASE_MCI,
 295                 .end    = AT91RM9200_BASE_MCI + SZ_16K - 1,
 296                 .flags  = IORESOURCE_MEM,
 297         },
 298         [1] = {
 299                 .start  = AT91RM9200_ID_MCI,
 300                 .end    = AT91RM9200_ID_MCI,
 301                 .flags  = IORESOURCE_IRQ,
 302         },
 303 };
 304
 305 static struct platform_device at91rm9200_mmc_device = {
 306         .name           = "at91_mci",
 307         .id             = -1,
 308         .dev            = {
 309                                 .dma_mask               = &mmc_dmamask,
 310                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 311                                 .platform_data          = &mmc_data,
 312         },
 313         .resource       = mmc_resources,
 314         .num_resources  = ARRAY_SIZE(mmc_resources),
 315 };
 316
 317 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 318 {
 319         if (!data)
 320                 return;
 321
 322         /* input/irq */
 323         if (data->det_pin) {
 324                 at91_set_gpio_input(data->det_pin, 1);
 325                 at91_set_deglitch(data->det_pin, 1);
 326         }
 327         if (data->wp_pin)
 328                 at91_set_gpio_input(data->wp_pin, 1);
 329         if (data->vcc_pin)
 330                 at91_set_gpio_output(data->vcc_pin, 0);
 331
 332         /* CLK */
 333         at91_set_A_periph(AT91_PIN_PA27, 0);
 334
 335         if (data->slot_b) {
 336                 /* CMD */
 337                 at91_set_B_periph(AT91_PIN_PA8, 1);
 338
 339                 /* DAT0, maybe DAT1..DAT3 */
 340                 at91_set_B_periph(AT91_PIN_PA9, 1);
 341                 if (data->wire4) {
 342                         at91_set_B_periph(AT91_PIN_PA10, 1);
 343                         at91_set_B_periph(AT91_PIN_PA11, 1);
 344                         at91_set_B_periph(AT91_PIN_PA12, 1);
 345                 }
 346         } else {
 347                 /* CMD */
 348                 at91_set_A_periph(AT91_PIN_PA28, 1);
 349
 350                 /* DAT0, maybe DAT1..DAT3 */
 351                 at91_set_A_periph(AT91_PIN_PA29, 1);
 352                 if (data->wire4) {
 353                         at91_set_B_periph(AT91_PIN_PB3, 1);
 354                         at91_set_B_periph(AT91_PIN_PB4, 1);
 355                         at91_set_B_periph(AT91_PIN_PB5, 1);
 356                 }
 357         }
 358
 359         mmc_data = *data;
 360         platform_device_register(&at91rm9200_mmc_device);
 361 }
 362 #else
 363 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 364 #endif
 365
 366
 367 /* --------------------------------------------------------------------
 368  *  NAND / SmartMedia
 369  * -------------------------------------------------------------------- */
 370
 371 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 372 static struct atmel_nand_data nand_data;
 373
 374 #define NAND_BASE       AT91_CHIPSELECT_3
 375
 376 static struct resource nand_resources[] = {
 377         {
 378                 .start  = NAND_BASE,
 379                 .end    = NAND_BASE + SZ_256M - 1,
 380                 .flags  = IORESOURCE_MEM,
 381         }
 382 };
 383
 384 static struct platform_device at91rm9200_nand_device = {
 385         .name           = "atmel_nand",
 386         .id             = -1,
 387         .dev            = {
 388                                 .platform_data  = &nand_data,
 389         },
 390         .resource       = nand_resources,
 391         .num_resources  = ARRAY_SIZE(nand_resources),
 392 };
 393
 394 void __init at91_add_device_nand(struct atmel_nand_data *data)
 395 {
 396         unsigned int csa;
 397
 398         if (!data)
 399                 return;
 400
 401         /* enable the address range of CS3 */
 402         csa = at91_sys_read(AT91_EBI_CSA);
 403         at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
 404
 405         /* set the bus interface characteristics */
 406         at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
 407                 | AT91_SMC_NWS_(5)
 408                 | AT91_SMC_TDF_(1)
 409                 | AT91_SMC_RWSETUP_(0)  /* tDS Data Set up Time 30 - ns */
 410                 | AT91_SMC_RWHOLD_(1)   /* tDH Data Hold Time 20 - ns */
 411         );
 412
 413         /* enable pin */
 414         if (data->enable_pin)
 415                 at91_set_gpio_output(data->enable_pin, 1);
 416
 417         /* ready/busy pin */
 418         if (data->rdy_pin)
 419                 at91_set_gpio_input(data->rdy_pin, 1);
 420
 421         /* card detect pin */
 422         if (data->det_pin)
 423                 at91_set_gpio_input(data->det_pin, 1);
 424
 425         at91_set_A_periph(AT91_PIN_PC1, 0);             /* SMOE */
 426         at91_set_A_periph(AT91_PIN_PC3, 0);             /* SMWE */
 427
 428         nand_data = *data;
 429         platform_device_register(&at91rm9200_nand_device);
 430 }
 431 #else
 432 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 433 #endif
 434
 435
 436 /* --------------------------------------------------------------------
 437  *  TWI (i2c)
 438  * -------------------------------------------------------------------- */
 439
 440 /*
 441  * Prefer the GPIO code since the TWI controller isn't robust
 442  * (gets overruns and underruns under load) and can only issue
 443  * repeated STARTs in one scenario (the driver doesn't yet handle them).
 444  */
 445 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 446
 447 static struct i2c_gpio_platform_data pdata = {
 448         .sda_pin                = AT91_PIN_PA25,
 449         .sda_is_open_drain      = 1,
 450         .scl_pin                = AT91_PIN_PA26,
 451         .scl_is_open_drain      = 1,
 452         .udelay                 = 2,            /* ~100 kHz */
 453 };
 454
 455 static struct platform_device at91rm9200_twi_device = {
 456         .name                   = "i2c-gpio",
 457         .id                     = -1,
 458         .dev.platform_data      = &pdata,
 459 };
 460
 461 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 462 {
 463         at91_set_GPIO_periph(AT91_PIN_PA25, 1);         /* TWD (SDA) */
 464         at91_set_multi_drive(AT91_PIN_PA25, 1);
 465
 466         at91_set_GPIO_periph(AT91_PIN_PA26, 1);         /* TWCK (SCL) */
 467         at91_set_multi_drive(AT91_PIN_PA26, 1);
 468
 469         i2c_register_board_info(0, devices, nr_devices);
 470         platform_device_register(&at91rm9200_twi_device);
 471 }
 472
 473 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 474
 475 static struct resource twi_resources[] = {
 476         [0] = {
 477                 .start  = AT91RM9200_BASE_TWI,
 478                 .end    = AT91RM9200_BASE_TWI + SZ_16K - 1,
 479                 .flags  = IORESOURCE_MEM,
 480         },
 481         [1] = {
 482                 .start  = AT91RM9200_ID_TWI,
 483                 .end    = AT91RM9200_ID_TWI,
 484                 .flags  = IORESOURCE_IRQ,
 485         },
 486 };
 487
 488 static struct platform_device at91rm9200_twi_device = {
 489         .name           = "at91_i2c",
 490         .id             = -1,
 491         .resource       = twi_resources,
 492         .num_resources  = ARRAY_SIZE(twi_resources),
 493 };
 494
 495 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 496 {
 497         /* pins used for TWI interface */
 498         at91_set_A_periph(AT91_PIN_PA25, 0);            /* TWD */
 499         at91_set_multi_drive(AT91_PIN_PA25, 1);
 500
 501         at91_set_A_periph(AT91_PIN_PA26, 0);            /* TWCK */
 502         at91_set_multi_drive(AT91_PIN_PA26, 1);
 503
 504         i2c_register_board_info(0, devices, nr_devices);
 505         platform_device_register(&at91rm9200_twi_device);
 506 }
 507 #else
 508 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 509 #endif
 510
 511
 512 /* --------------------------------------------------------------------
 513  *  SPI
 514  * -------------------------------------------------------------------- */
 515
 516 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 517 static u64 spi_dmamask = DMA_BIT_MASK(32);
 518
 519 static struct resource spi_resources[] = {
 520         [0] = {
 521                 .start  = AT91RM9200_BASE_SPI,
 522                 .end    = AT91RM9200_BASE_SPI + SZ_16K - 1,
 523                 .flags  = IORESOURCE_MEM,
 524         },
 525         [1] = {
 526                 .start  = AT91RM9200_ID_SPI,
 527                 .end    = AT91RM9200_ID_SPI,
 528                 .flags  = IORESOURCE_IRQ,
 529         },
 530 };
 531
 532 static struct platform_device at91rm9200_spi_device = {
 533         .name           = "atmel_spi",
 534         .id             = 0,
 535         .dev            = {
 536                                 .dma_mask               = &spi_dmamask,
 537                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 538         },
 539         .resource       = spi_resources,
 540         .num_resources  = ARRAY_SIZE(spi_resources),
 541 };
 542
 543 static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
 544
 545 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 546 {
 547         int i;
 548         unsigned long cs_pin;
 549
 550         at91_set_A_periph(AT91_PIN_PA0, 0);     /* MISO */
 551         at91_set_A_periph(AT91_PIN_PA1, 0);     /* MOSI */
 552         at91_set_A_periph(AT91_PIN_PA2, 0);     /* SPCK */
 553
 554         /* Enable SPI chip-selects */
 555         for (i = 0; i < nr_devices; i++) {
 556                 if (devices[i].controller_data)
 557                         cs_pin = (unsigned long) devices[i].controller_data;
 558                 else
 559                         cs_pin = spi_standard_cs[devices[i].chip_select];
 560
 561                 if (devices[i].chip_select == 0)        /* for CS0 errata */
 562                         at91_set_A_periph(cs_pin, 0);
 563                 else
 564                         at91_set_gpio_output(cs_pin, 1);
 565
 566
 567                 /* pass chip-select pin to driver */
 568                 devices[i].controller_data = (void *) cs_pin;
 569         }
 570
 571         spi_register_board_info(devices, nr_devices);
 572         platform_device_register(&at91rm9200_spi_device);
 573 }
 574 #else
 575 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 576 #endif
 577
 578
 579 /* --------------------------------------------------------------------
 580  *  Timer/Counter blocks
 581  * -------------------------------------------------------------------- */
 582
 583 #ifdef CONFIG_ATMEL_TCLIB
 584
 585 static struct resource tcb0_resources[] = {
 586         [0] = {
 587                 .start  = AT91RM9200_BASE_TCB0,
 588                 .end    = AT91RM9200_BASE_TCB0 + SZ_16K - 1,
 589                 .flags  = IORESOURCE_MEM,
 590         },
 591         [1] = {
 592                 .start  = AT91RM9200_ID_TC0,
 593                 .end    = AT91RM9200_ID_TC0,
 594                 .flags  = IORESOURCE_IRQ,
 595         },
 596         [2] = {
 597                 .start  = AT91RM9200_ID_TC1,
 598                 .end    = AT91RM9200_ID_TC1,
 599                 .flags  = IORESOURCE_IRQ,
 600         },
 601         [3] = {
 602                 .start  = AT91RM9200_ID_TC2,
 603                 .end    = AT91RM9200_ID_TC2,
 604                 .flags  = IORESOURCE_IRQ,
 605         },
 606 };
 607
 608 static struct platform_device at91rm9200_tcb0_device = {
 609         .name           = "atmel_tcb",
 610         .id             = 0,
 611         .resource       = tcb0_resources,
 612         .num_resources  = ARRAY_SIZE(tcb0_resources),
 613 };
 614
 615 static struct resource tcb1_resources[] = {
 616         [0] = {
 617                 .start  = AT91RM9200_BASE_TCB1,
 618                 .end    = AT91RM9200_BASE_TCB1 + SZ_16K - 1,
 619                 .flags  = IORESOURCE_MEM,
 620         },
 621         [1] = {
 622                 .start  = AT91RM9200_ID_TC3,
 623                 .end    = AT91RM9200_ID_TC3,
 624                 .flags  = IORESOURCE_IRQ,
 625         },
 626         [2] = {
 627                 .start  = AT91RM9200_ID_TC4,
 628                 .end    = AT91RM9200_ID_TC4,
 629                 .flags  = IORESOURCE_IRQ,
 630         },
 631         [3] = {
 632                 .start  = AT91RM9200_ID_TC5,
 633                 .end    = AT91RM9200_ID_TC5,
 634                 .flags  = IORESOURCE_IRQ,
 635         },
 636 };
 637
 638 static struct platform_device at91rm9200_tcb1_device = {
 639         .name           = "atmel_tcb",
 640         .id             = 1,
 641         .resource       = tcb1_resources,
 642         .num_resources  = ARRAY_SIZE(tcb1_resources),
 643 };
 644
 645 static void __init at91_add_device_tc(void)
 646 {
 647         /* this chip has a separate clock and irq for each TC channel */
 648         at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
 649         at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
 650         at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
 651         platform_device_register(&at91rm9200_tcb0_device);
 652
 653         at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
 654         at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
 655         at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
 656         platform_device_register(&at91rm9200_tcb1_device);
 657 }
 658 #else
 659 static void __init at91_add_device_tc(void) { }
 660 #endif
 661
 662
 663 /* --------------------------------------------------------------------
 664  *  RTC
 665  * -------------------------------------------------------------------- */
 666
 667 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
 668 static struct platform_device at91rm9200_rtc_device = {
 669         .name           = "at91_rtc",
 670         .id             = -1,
 671         .num_resources  = 0,
 672 };
 673
 674 static void __init at91_add_device_rtc(void)
 675 {
 676         platform_device_register(&at91rm9200_rtc_device);
 677 }
 678 #else
 679 static void __init at91_add_device_rtc(void) {}
 680 #endif
 681
 682
 683 /* --------------------------------------------------------------------
 684  *  Watchdog
 685  * -------------------------------------------------------------------- */
 686
 687 #if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
 688 static struct platform_device at91rm9200_wdt_device = {
 689         .name           = "at91_wdt",
 690         .id             = -1,
 691         .num_resources  = 0,
 692 };
 693
 694 static void __init at91_add_device_watchdog(void)
 695 {
 696         platform_device_register(&at91rm9200_wdt_device);
 697 }
 698 #else
 699 static void __init at91_add_device_watchdog(void) {}
 700 #endif
 701
 702
 703 /* --------------------------------------------------------------------
 704  *  SSC -- Synchronous Serial Controller
 705  * -------------------------------------------------------------------- */
 706
 707 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
 708 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
 709
 710 static struct resource ssc0_resources[] = {
 711         [0] = {
 712                 .start  = AT91RM9200_BASE_SSC0,
 713                 .end    = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
 714                 .flags  = IORESOURCE_MEM,
 715         },
 716         [1] = {
 717                 .start  = AT91RM9200_ID_SSC0,
 718                 .end    = AT91RM9200_ID_SSC0,
 719                 .flags  = IORESOURCE_IRQ,
 720         },
 721 };
 722
 723 static struct platform_device at91rm9200_ssc0_device = {
 724         .name   = "ssc",
 725         .id     = 0,
 726         .dev    = {
 727                 .dma_mask               = &ssc0_dmamask,
 728                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 729         },
 730         .resource       = ssc0_resources,
 731         .num_resources  = ARRAY_SIZE(ssc0_resources),
 732 };
 733
 734 static inline void configure_ssc0_pins(unsigned pins)
 735 {
 736         if (pins & ATMEL_SSC_TF)
 737                 at91_set_A_periph(AT91_PIN_PB0, 1);
 738         if (pins & ATMEL_SSC_TK)
 739                 at91_set_A_periph(AT91_PIN_PB1, 1);
 740         if (pins & ATMEL_SSC_TD)
 741                 at91_set_A_periph(AT91_PIN_PB2, 1);
 742         if (pins & ATMEL_SSC_RD)
 743                 at91_set_A_periph(AT91_PIN_PB3, 1);
 744         if (pins & ATMEL_SSC_RK)
 745                 at91_set_A_periph(AT91_PIN_PB4, 1);
 746         if (pins & ATMEL_SSC_RF)
 747                 at91_set_A_periph(AT91_PIN_PB5, 1);
 748 }
 749
 750 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
 751
 752 static struct resource ssc1_resources[] = {
 753         [0] = {
 754                 .start  = AT91RM9200_BASE_SSC1,
 755                 .end    = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
 756                 .flags  = IORESOURCE_MEM,
 757         },
 758         [1] = {
 759                 .start  = AT91RM9200_ID_SSC1,
 760                 .end    = AT91RM9200_ID_SSC1,
 761                 .flags  = IORESOURCE_IRQ,
 762         },
 763 };
 764
 765 static struct platform_device at91rm9200_ssc1_device = {
 766         .name   = "ssc",
 767         .id     = 1,
 768         .dev    = {
 769                 .dma_mask               = &ssc1_dmamask,
 770                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 771         },
 772         .resource       = ssc1_resources,
 773         .num_resources  = ARRAY_SIZE(ssc1_resources),
 774 };
 775
 776 static inline void configure_ssc1_pins(unsigned pins)
 777 {
 778         if (pins & ATMEL_SSC_TF)
 779                 at91_set_A_periph(AT91_PIN_PB6, 1);
 780         if (pins & ATMEL_SSC_TK)
 781                 at91_set_A_periph(AT91_PIN_PB7, 1);
 782         if (pins & ATMEL_SSC_TD)
 783                 at91_set_A_periph(AT91_PIN_PB8, 1);
 784         if (pins & ATMEL_SSC_RD)
 785                 at91_set_A_periph(AT91_PIN_PB9, 1);
 786         if (pins & ATMEL_SSC_RK)
 787                 at91_set_A_periph(AT91_PIN_PB10, 1);
 788         if (pins & ATMEL_SSC_RF)
 789                 at91_set_A_periph(AT91_PIN_PB11, 1);
 790 }
 791
 792 static u64 ssc2_dmamask = DMA_BIT_MASK(32);
 793
 794 static struct resource ssc2_resources[] = {
 795         [0] = {
 796                 .start  = AT91RM9200_BASE_SSC2,
 797                 .end    = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
 798                 .flags  = IORESOURCE_MEM,
 799         },
 800         [1] = {
 801                 .start  = AT91RM9200_ID_SSC2,
 802                 .end    = AT91RM9200_ID_SSC2,
 803                 .flags  = IORESOURCE_IRQ,
 804         },
 805 };
 806
 807 static struct platform_device at91rm9200_ssc2_device = {
 808         .name   = "ssc",
 809         .id     = 2,
 810         .dev    = {
 811                 .dma_mask               = &ssc2_dmamask,
 812                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 813         },
 814         .resource       = ssc2_resources,
 815         .num_resources  = ARRAY_SIZE(ssc2_resources),
 816 };
 817
 818 static inline void configure_ssc2_pins(unsigned pins)
 819 {
 820         if (pins & ATMEL_SSC_TF)
 821                 at91_set_A_periph(AT91_PIN_PB12, 1);
 822         if (pins & ATMEL_SSC_TK)
 823                 at91_set_A_periph(AT91_PIN_PB13, 1);
 824         if (pins & ATMEL_SSC_TD)
 825                 at91_set_A_periph(AT91_PIN_PB14, 1);
 826         if (pins & ATMEL_SSC_RD)
 827                 at91_set_A_periph(AT91_PIN_PB15, 1);
 828         if (pins & ATMEL_SSC_RK)
 829                 at91_set_A_periph(AT91_PIN_PB16, 1);
 830         if (pins & ATMEL_SSC_RF)
 831                 at91_set_A_periph(AT91_PIN_PB17, 1);
 832 }
 833
 834 /*
 835  * SSC controllers are accessed through library code, instead of any
 836  * kind of all-singing/all-dancing driver.  For example one could be
 837  * used by a particular I2S audio codec's driver, while another one
 838  * on the same system might be used by a custom data capture driver.
 839  */
 840 void __init at91_add_device_ssc(unsigned id, unsigned pins)
 841 {
 842         struct platform_device *pdev;
 843
 844         /*
 845          * NOTE: caller is responsible for passing information matching
 846          * "pins" to whatever will be using each particular controller.
 847          */
 848         switch (id) {
 849         case AT91RM9200_ID_SSC0:
 850                 pdev = &at91rm9200_ssc0_device;
 851                 configure_ssc0_pins(pins);
 852                 at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 853                 break;
 854         case AT91RM9200_ID_SSC1:
 855                 pdev = &at91rm9200_ssc1_device;
 856                 configure_ssc1_pins(pins);
 857                 at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 858                 break;
 859         case AT91RM9200_ID_SSC2:
 860                 pdev = &at91rm9200_ssc2_device;
 861                 configure_ssc2_pins(pins);
 862                 at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
 863                 break;
 864         default:
 865                 return;
 866         }
 867
 868         platform_device_register(pdev);
 869 }
 870
 871 #else
 872 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 873 #endif
 874
 875
 876 /* --------------------------------------------------------------------
 877  *  UART
 878  * -------------------------------------------------------------------- */
 879
 880 #if defined(CONFIG_SERIAL_ATMEL)
 881 static struct resource dbgu_resources[] = {
 882         [0] = {
 883                 .start  = AT91_VA_BASE_SYS + AT91_DBGU,
 884                 .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 885                 .flags  = IORESOURCE_MEM,
 886         },
 887         [1] = {
 888                 .start  = AT91_ID_SYS,
 889                 .end    = AT91_ID_SYS,
 890                 .flags  = IORESOURCE_IRQ,
 891         },
 892 };
 893
 894 static struct atmel_uart_data dbgu_data = {
 895         .use_dma_tx     = 0,
 896         .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
 897         .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 898 };
 899
 900 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
 901
 902 static struct platform_device at91rm9200_dbgu_device = {
 903         .name           = "atmel_usart",
 904         .id             = 0,
 905         .dev            = {
 906                                 .dma_mask               = &dbgu_dmamask,
 907                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 908                                 .platform_data          = &dbgu_data,
 909         },
 910         .resource       = dbgu_resources,
 911         .num_resources  = ARRAY_SIZE(dbgu_resources),
 912 };
 913
 914 static inline void configure_dbgu_pins(void)
 915 {
 916         at91_set_A_periph(AT91_PIN_PA30, 0);            /* DRXD */
 917         at91_set_A_periph(AT91_PIN_PA31, 1);            /* DTXD */
 918 }
 919
 920 static struct resource uart0_resources[] = {
 921         [0] = {
 922                 .start  = AT91RM9200_BASE_US0,
 923                 .end    = AT91RM9200_BASE_US0 + SZ_16K - 1,
 924                 .flags  = IORESOURCE_MEM,
 925         },
 926         [1] = {
 927                 .start  = AT91RM9200_ID_US0,
 928                 .end    = AT91RM9200_ID_US0,
 929                 .flags  = IORESOURCE_IRQ,
 930         },
 931 };
 932
 933 static struct atmel_uart_data uart0_data = {
 934         .use_dma_tx     = 1,
 935         .use_dma_rx     = 1,
 936 };
 937
 938 static u64 uart0_dmamask = DMA_BIT_MASK(32);
 939
 940 static struct platform_device at91rm9200_uart0_device = {
 941         .name           = "atmel_usart",
 942         .id             = 1,
 943         .dev            = {
 944                                 .dma_mask               = &uart0_dmamask,
 945                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 946                                 .platform_data          = &uart0_data,
 947         },
 948         .resource       = uart0_resources,
 949         .num_resources  = ARRAY_SIZE(uart0_resources),
 950 };
 951
 952 static inline void configure_usart0_pins(unsigned pins)
 953 {
 954         at91_set_A_periph(AT91_PIN_PA17, 1);            /* TXD0 */
 955         at91_set_A_periph(AT91_PIN_PA18, 0);            /* RXD0 */
 956
 957         if (pins & ATMEL_UART_CTS)
 958                 at91_set_A_periph(AT91_PIN_PA20, 0);    /* CTS0 */
 959
 960         if (pins & ATMEL_UART_RTS) {
 961                 /*
 962                  * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
 963                  *  We need to drive the pin manually.  Default is off (RTS is active low).
 964                  */
 965                 at91_set_gpio_output(AT91_PIN_PA21, 1);
 966         }
 967 }
 968
 969 static struct resource uart1_resources[] = {
 970         [0] = {
 971                 .start  = AT91RM9200_BASE_US1,
 972                 .end    = AT91RM9200_BASE_US1 + SZ_16K - 1,
 973                 .flags  = IORESOURCE_MEM,
 974         },
 975         [1] = {
 976                 .start  = AT91RM9200_ID_US1,
 977                 .end    = AT91RM9200_ID_US1,
 978                 .flags  = IORESOURCE_IRQ,
 979         },
 980 };
 981
 982 static struct atmel_uart_data uart1_data = {
 983         .use_dma_tx     = 1,
 984         .use_dma_rx     = 1,
 985 };
 986
 987 static u64 uart1_dmamask = DMA_BIT_MASK(32);
 988
 989 static struct platform_device at91rm9200_uart1_device = {
 990         .name           = "atmel_usart",
 991         .id             = 2,
 992         .dev            = {
 993                                 .dma_mask               = &uart1_dmamask,
 994                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 995                                 .platform_data          = &uart1_data,
 996         },
 997         .resource       = uart1_resources,
 998         .num_resources  = ARRAY_SIZE(uart1_resources),
 999 };
1000
1001 static inline void configure_usart1_pins(unsigned pins)
1002 {
1003         at91_set_A_periph(AT91_PIN_PB20, 1);            /* TXD1 */
1004         at91_set_A_periph(AT91_PIN_PB21, 0);            /* RXD1 */
1005
1006         if (pins & ATMEL_UART_RI)
1007                 at91_set_A_periph(AT91_PIN_PB18, 0);    /* RI1 */
1008         if (pins & ATMEL_UART_DTR)
1009                 at91_set_A_periph(AT91_PIN_PB19, 0);    /* DTR1 */
1010         if (pins & ATMEL_UART_DCD)
1011                 at91_set_A_periph(AT91_PIN_PB23, 0);    /* DCD1 */
1012         if (pins & ATMEL_UART_CTS)
1013                 at91_set_A_periph(AT91_PIN_PB24, 0);    /* CTS1 */
1014         if (pins & ATMEL_UART_DSR)
1015                 at91_set_A_periph(AT91_PIN_PB25, 0);    /* DSR1 */
1016         if (pins & ATMEL_UART_RTS)
1017                 at91_set_A_periph(AT91_PIN_PB26, 0);    /* RTS1 */
1018 }
1019
1020 static struct resource uart2_resources[] = {
1021         [0] = {
1022                 .start  = AT91RM9200_BASE_US2,
1023                 .end    = AT91RM9200_BASE_US2 + SZ_16K - 1,
1024                 .flags  = IORESOURCE_MEM,
1025         },
1026         [1] = {
1027                 .start  = AT91RM9200_ID_US2,
1028                 .end    = AT91RM9200_ID_US2,
1029                 .flags  = IORESOURCE_IRQ,
1030         },
1031 };
1032
1033 static struct atmel_uart_data uart2_data = {
1034         .use_dma_tx     = 1,
1035         .use_dma_rx     = 1,
1036 };
1037
1038 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1039
1040 static struct platform_device at91rm9200_uart2_device = {
1041         .name           = "atmel_usart",
1042         .id             = 3,
1043         .dev            = {
1044                                 .dma_mask               = &uart2_dmamask,
1045                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1046                                 .platform_data          = &uart2_data,
1047         },
1048         .resource       = uart2_resources,
1049         .num_resources  = ARRAY_SIZE(uart2_resources),
1050 };
1051
1052 static inline void configure_usart2_pins(unsigned pins)
1053 {
1054         at91_set_A_periph(AT91_PIN_PA22, 0);            /* RXD2 */
1055         at91_set_A_periph(AT91_PIN_PA23, 1);            /* TXD2 */
1056
1057         if (pins & ATMEL_UART_CTS)
1058                 at91_set_B_periph(AT91_PIN_PA30, 0);    /* CTS2 */
1059         if (pins & ATMEL_UART_RTS)
1060                 at91_set_B_periph(AT91_PIN_PA31, 0);    /* RTS2 */
1061 }
1062
1063 static struct resource uart3_resources[] = {
1064         [0] = {
1065                 .start  = AT91RM9200_BASE_US3,
1066                 .end    = AT91RM9200_BASE_US3 + SZ_16K - 1,
1067                 .flags  = IORESOURCE_MEM,
1068         },
1069         [1] = {
1070                 .start  = AT91RM9200_ID_US3,
1071                 .end    = AT91RM9200_ID_US3,
1072                 .flags  = IORESOURCE_IRQ,
1073         },
1074 };
1075
1076 static struct atmel_uart_data uart3_data = {
1077         .use_dma_tx     = 1,
1078         .use_dma_rx     = 1,
1079 };
1080
1081 static u64 uart3_dmamask = DMA_BIT_MASK(32);
1082
1083 static struct platform_device at91rm9200_uart3_device = {
1084         .name           = "atmel_usart",
1085         .id             = 4,
1086         .dev            = {
1087                                 .dma_mask               = &uart3_dmamask,
1088                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1089                                 .platform_data          = &uart3_data,
1090         },
1091         .resource       = uart3_resources,
1092         .num_resources  = ARRAY_SIZE(uart3_resources),
1093 };
1094
1095 static inline void configure_usart3_pins(unsigned pins)
1096 {
1097         at91_set_B_periph(AT91_PIN_PA5, 1);             /* TXD3 */
1098         at91_set_B_periph(AT91_PIN_PA6, 0);             /* RXD3 */
1099
1100         if (pins & ATMEL_UART_CTS)
1101                 at91_set_B_periph(AT91_PIN_PB1, 0);     /* CTS3 */
1102         if (pins & ATMEL_UART_RTS)
1103                 at91_set_B_periph(AT91_PIN_PB0, 0);     /* RTS3 */
1104 }
1105
1106 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1107 struct platform_device *atmel_default_console_device;   /* the serial console device */
1108
1109 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1110 {
1111         struct platform_device *pdev;
1112
1113         switch (id) {
1114                 case 0:         /* DBGU */
1115                         pdev = &at91rm9200_dbgu_device;
1116                         configure_dbgu_pins();
1117                         at91_clock_associate("mck", &pdev->dev, "usart");
1118                         break;
1119                 case AT91RM9200_ID_US0:
1120                         pdev = &at91rm9200_uart0_device;
1121                         configure_usart0_pins(pins);
1122                         at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1123                         break;
1124                 case AT91RM9200_ID_US1:
1125                         pdev = &at91rm9200_uart1_device;
1126                         configure_usart1_pins(pins);
1127                         at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1128                         break;
1129                 case AT91RM9200_ID_US2:
1130                         pdev = &at91rm9200_uart2_device;
1131                         configure_usart2_pins(pins);
1132                         at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1133                         break;
1134                 case AT91RM9200_ID_US3:
1135                         pdev = &at91rm9200_uart3_device;
1136                         configure_usart3_pins(pins);
1137                         at91_clock_associate("usart3_clk", &pdev->dev, "usart");
1138                         break;
1139                 default:
1140                         return;
1141         }
1142         pdev->id = portnr;              /* update to mapped ID */
1143
1144         if (portnr < ATMEL_MAX_UART)
1145                 at91_uarts[portnr] = pdev;
1146 }
1147
1148 void __init at91_set_serial_console(unsigned portnr)
1149 {
1150         if (portnr < ATMEL_MAX_UART)
1151                 atmel_default_console_device = at91_uarts[portnr];
1152 }
1153
1154 void __init at91_add_device_serial(void)
1155 {
1156         int i;
1157
1158         for (i = 0; i < ATMEL_MAX_UART; i++) {
1159                 if (at91_uarts[i])
1160                         platform_device_register(at91_uarts[i]);
1161         }
1162
1163         if (!atmel_default_console_device)
1164                 printk(KERN_INFO "AT91: No default serial console defined.\n");
1165 }
1166 #else
1167 void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
1168 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1169 void __init at91_set_serial_console(unsigned portnr) {}
1170 void __init at91_add_device_serial(void) {}
1171 #endif
1172
1173
1174 /* -------------------------------------------------------------------- */
1175
1176 /*
1177  * These devices are always present and don't need any board-specific
1178  * setup.
1179  */
1180 static int __init at91_add_standard_devices(void)
1181 {
1182         at91_add_device_rtc();
1183         at91_add_device_watchdog();
1184         at91_add_device_tc();
1185         return 0;
1186 }
1187
1188 arch_initcall(at91_add_standard_devices);