Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek...
[pandora-kernel.git] / arch / arm / include / asm / pgtable.h
1 /*
2  *  arch/arm/include/asm/pgtable.h
3  *
4  *  Copyright (C) 1995-2002 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 #ifndef _ASMARM_PGTABLE_H
11 #define _ASMARM_PGTABLE_H
12
13 #include <asm-generic/4level-fixup.h>
14 #include <asm/proc-fns.h>
15
16 #ifndef CONFIG_MMU
17
18 #include "pgtable-nommu.h"
19
20 #else
21
22 #include <asm/memory.h>
23 #include <mach/vmalloc.h>
24 #include <asm/pgtable-hwdef.h>
25
26 /*
27  * Just any arbitrary offset to the start of the vmalloc VM area: the
28  * current 8MB value just means that there will be a 8MB "hole" after the
29  * physical memory until the kernel virtual memory starts.  That means that
30  * any out-of-bounds memory accesses will hopefully be caught.
31  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
32  * area for the same reason. ;)
33  *
34  * Note that platforms may override VMALLOC_START, but they must provide
35  * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
36  * which may not overlap IO space.
37  */
38 #ifndef VMALLOC_START
39 #define VMALLOC_OFFSET          (8*1024*1024)
40 #define VMALLOC_START           (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
41 #endif
42
43 /*
44  * Hardware-wise, we have a two level page table structure, where the first
45  * level has 4096 entries, and the second level has 256 entries.  Each entry
46  * is one 32-bit word.  Most of the bits in the second level entry are used
47  * by hardware, and there aren't any "accessed" and "dirty" bits.
48  *
49  * Linux on the other hand has a three level page table structure, which can
50  * be wrapped to fit a two level page table structure easily - using the PGD
51  * and PTE only.  However, Linux also expects one "PTE" table per page, and
52  * at least a "dirty" bit.
53  *
54  * Therefore, we tweak the implementation slightly - we tell Linux that we
55  * have 2048 entries in the first level, each of which is 8 bytes (iow, two
56  * hardware pointers to the second level.)  The second level contains two
57  * hardware PTE tables arranged contiguously, followed by Linux versions
58  * which contain the state information Linux needs.  We, therefore, end up
59  * with 512 entries in the "PTE" level.
60  *
61  * This leads to the page tables having the following layout:
62  *
63  *    pgd             pte
64  * |        |
65  * +--------+ +0
66  * |        |-----> +------------+ +0
67  * +- - - - + +4    |  h/w pt 0  |
68  * |        |-----> +------------+ +1024
69  * +--------+ +8    |  h/w pt 1  |
70  * |        |       +------------+ +2048
71  * +- - - - +       | Linux pt 0 |
72  * |        |       +------------+ +3072
73  * +--------+       | Linux pt 1 |
74  * |        |       +------------+ +4096
75  *
76  * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
77  * PTE_xxx for definitions of bits appearing in the "h/w pt".
78  *
79  * PMD_xxx definitions refer to bits in the first level page table.
80  *
81  * The "dirty" bit is emulated by only granting hardware write permission
82  * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
83  * means that a write to a clean page will cause a permission fault, and
84  * the Linux MM layer will mark the page dirty via handle_pte_fault().
85  * For the hardware to notice the permission change, the TLB entry must
86  * be flushed, and ptep_set_access_flags() does that for us.
87  *
88  * The "accessed" or "young" bit is emulated by a similar method; we only
89  * allow accesses to the page if the "young" bit is set.  Accesses to the
90  * page will cause a fault, and handle_pte_fault() will set the young bit
91  * for us as long as the page is marked present in the corresponding Linux
92  * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
93  * up to date.
94  *
95  * However, when the "young" bit is cleared, we deny access to the page
96  * by clearing the hardware PTE.  Currently Linux does not flush the TLB
97  * for us in this case, which means the TLB will retain the transation
98  * until either the TLB entry is evicted under pressure, or a context
99  * switch which changes the user space mapping occurs.
100  */
101 #define PTRS_PER_PTE            512
102 #define PTRS_PER_PMD            1
103 #define PTRS_PER_PGD            2048
104
105 /*
106  * PMD_SHIFT determines the size of the area a second-level page table can map
107  * PGDIR_SHIFT determines what a third-level page table entry can map
108  */
109 #define PMD_SHIFT               21
110 #define PGDIR_SHIFT             21
111
112 #define LIBRARY_TEXT_START      0x0c000000
113
114 #ifndef __ASSEMBLY__
115 extern void __pte_error(const char *file, int line, unsigned long val);
116 extern void __pmd_error(const char *file, int line, unsigned long val);
117 extern void __pgd_error(const char *file, int line, unsigned long val);
118
119 #define pte_ERROR(pte)          __pte_error(__FILE__, __LINE__, pte_val(pte))
120 #define pmd_ERROR(pmd)          __pmd_error(__FILE__, __LINE__, pmd_val(pmd))
121 #define pgd_ERROR(pgd)          __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
122 #endif /* !__ASSEMBLY__ */
123
124 #define PMD_SIZE                (1UL << PMD_SHIFT)
125 #define PMD_MASK                (~(PMD_SIZE-1))
126 #define PGDIR_SIZE              (1UL << PGDIR_SHIFT)
127 #define PGDIR_MASK              (~(PGDIR_SIZE-1))
128
129 /*
130  * This is the lowest virtual address we can permit any user space
131  * mapping to be mapped at.  This is particularly important for
132  * non-high vector CPUs.
133  */
134 #define FIRST_USER_ADDRESS      PAGE_SIZE
135
136 #define FIRST_USER_PGD_NR       1
137 #define USER_PTRS_PER_PGD       ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
138
139 /*
140  * section address mask and size definitions.
141  */
142 #define SECTION_SHIFT           20
143 #define SECTION_SIZE            (1UL << SECTION_SHIFT)
144 #define SECTION_MASK            (~(SECTION_SIZE-1))
145
146 /*
147  * ARMv6 supersection address mask and size definitions.
148  */
149 #define SUPERSECTION_SHIFT      24
150 #define SUPERSECTION_SIZE       (1UL << SUPERSECTION_SHIFT)
151 #define SUPERSECTION_MASK       (~(SUPERSECTION_SIZE-1))
152
153 /*
154  * "Linux" PTE definitions.
155  *
156  * We keep two sets of PTEs - the hardware and the linux version.
157  * This allows greater flexibility in the way we map the Linux bits
158  * onto the hardware tables, and allows us to have YOUNG and DIRTY
159  * bits.
160  *
161  * The PTE table pointer refers to the hardware entries; the "Linux"
162  * entries are stored 1024 bytes below.
163  */
164 #define L_PTE_PRESENT           (1 << 0)
165 #define L_PTE_YOUNG             (1 << 1)
166 #define L_PTE_FILE              (1 << 2)        /* only when !PRESENT */
167 #define L_PTE_DIRTY             (1 << 6)
168 #define L_PTE_WRITE             (1 << 7)
169 #define L_PTE_USER              (1 << 8)
170 #define L_PTE_EXEC              (1 << 9)
171 #define L_PTE_SHARED            (1 << 10)       /* shared(v6), coherent(xsc3) */
172
173 /*
174  * These are the memory types, defined to be compatible with
175  * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
176  */
177 #define L_PTE_MT_UNCACHED       (0x00 << 2)     /* 0000 */
178 #define L_PTE_MT_BUFFERABLE     (0x01 << 2)     /* 0001 */
179 #define L_PTE_MT_WRITETHROUGH   (0x02 << 2)     /* 0010 */
180 #define L_PTE_MT_WRITEBACK      (0x03 << 2)     /* 0011 */
181 #define L_PTE_MT_MINICACHE      (0x06 << 2)     /* 0110 (sa1100, xscale) */
182 #define L_PTE_MT_WRITEALLOC     (0x07 << 2)     /* 0111 */
183 #define L_PTE_MT_DEV_SHARED     (0x04 << 2)     /* 0100 */
184 #define L_PTE_MT_DEV_NONSHARED  (0x0c << 2)     /* 1100 */
185 #define L_PTE_MT_DEV_WC         (0x09 << 2)     /* 1001 */
186 #define L_PTE_MT_DEV_CACHED     (0x0b << 2)     /* 1011 */
187 #define L_PTE_MT_MASK           (0x0f << 2)
188
189 #ifndef __ASSEMBLY__
190
191 /*
192  * The pgprot_* and protection_map entries will be fixed up in runtime
193  * to include the cachable and bufferable bits based on memory policy,
194  * as well as any architecture dependent bits like global/ASID and SMP
195  * shared mapping bits.
196  */
197 #define _L_PTE_DEFAULT  L_PTE_PRESENT | L_PTE_YOUNG
198
199 extern pgprot_t         pgprot_user;
200 extern pgprot_t         pgprot_kernel;
201
202 #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
203
204 #define PAGE_NONE               pgprot_user
205 #define PAGE_SHARED             _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE)
206 #define PAGE_SHARED_EXEC        _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
207 #define PAGE_COPY               _MOD_PROT(pgprot_user, L_PTE_USER)
208 #define PAGE_COPY_EXEC          _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
209 #define PAGE_READONLY           _MOD_PROT(pgprot_user, L_PTE_USER)
210 #define PAGE_READONLY_EXEC      _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
211 #define PAGE_KERNEL             pgprot_kernel
212 #define PAGE_KERNEL_EXEC        _MOD_PROT(pgprot_kernel, L_PTE_EXEC)
213
214 #define __PAGE_NONE             __pgprot(_L_PTE_DEFAULT)
215 #define __PAGE_SHARED           __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE)
216 #define __PAGE_SHARED_EXEC      __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
217 #define __PAGE_COPY             __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
218 #define __PAGE_COPY_EXEC        __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
219 #define __PAGE_READONLY         __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
220 #define __PAGE_READONLY_EXEC    __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
221
222 #endif /* __ASSEMBLY__ */
223
224 /*
225  * The table below defines the page protection levels that we insert into our
226  * Linux page table version.  These get translated into the best that the
227  * architecture can perform.  Note that on most ARM hardware:
228  *  1) We cannot do execute protection
229  *  2) If we could do execute protection, then read is implied
230  *  3) write implies read permissions
231  */
232 #define __P000  __PAGE_NONE
233 #define __P001  __PAGE_READONLY
234 #define __P010  __PAGE_COPY
235 #define __P011  __PAGE_COPY
236 #define __P100  __PAGE_READONLY_EXEC
237 #define __P101  __PAGE_READONLY_EXEC
238 #define __P110  __PAGE_COPY_EXEC
239 #define __P111  __PAGE_COPY_EXEC
240
241 #define __S000  __PAGE_NONE
242 #define __S001  __PAGE_READONLY
243 #define __S010  __PAGE_SHARED
244 #define __S011  __PAGE_SHARED
245 #define __S100  __PAGE_READONLY_EXEC
246 #define __S101  __PAGE_READONLY_EXEC
247 #define __S110  __PAGE_SHARED_EXEC
248 #define __S111  __PAGE_SHARED_EXEC
249
250 #ifndef __ASSEMBLY__
251 /*
252  * ZERO_PAGE is a global shared page that is always zero: used
253  * for zero-mapped memory areas etc..
254  */
255 extern struct page *empty_zero_page;
256 #define ZERO_PAGE(vaddr)        (empty_zero_page)
257
258 #define pte_pfn(pte)            (pte_val(pte) >> PAGE_SHIFT)
259 #define pfn_pte(pfn,prot)       (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
260
261 #define pte_none(pte)           (!pte_val(pte))
262 #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
263 #define pte_page(pte)           (pfn_to_page(pte_pfn(pte)))
264 #define pte_offset_kernel(dir,addr)     (pmd_page_vaddr(*(dir)) + __pte_index(addr))
265
266 #define pte_offset_map(dir,addr)        (__pte_map(dir) + __pte_index(addr))
267 #define pte_unmap(pte)                  __pte_unmap(pte)
268
269 #ifndef CONFIG_HIGHPTE
270 #define __pte_map(dir)          pmd_page_vaddr(*(dir))
271 #define __pte_unmap(pte)        do { } while (0)
272 #else
273 #define __pte_map(dir)          ((pte_t *)kmap_atomic(pmd_page(*(dir))) + PTRS_PER_PTE)
274 #define __pte_unmap(pte)        kunmap_atomic((pte - PTRS_PER_PTE))
275 #endif
276
277 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
278
279 #if __LINUX_ARM_ARCH__ < 6
280 static inline void __sync_icache_dcache(pte_t pteval)
281 {
282 }
283 #else
284 extern void __sync_icache_dcache(pte_t pteval);
285 #endif
286
287 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
288                               pte_t *ptep, pte_t pteval)
289 {
290         if (addr >= TASK_SIZE)
291                 set_pte_ext(ptep, pteval, 0);
292         else {
293                 __sync_icache_dcache(pteval);
294                 set_pte_ext(ptep, pteval, PTE_EXT_NG);
295         }
296 }
297
298 /*
299  * The following only work if pte_present() is true.
300  * Undefined behaviour if not..
301  */
302 #define pte_present(pte)        (pte_val(pte) & L_PTE_PRESENT)
303 #define pte_write(pte)          (pte_val(pte) & L_PTE_WRITE)
304 #define pte_dirty(pte)          (pte_val(pte) & L_PTE_DIRTY)
305 #define pte_young(pte)          (pte_val(pte) & L_PTE_YOUNG)
306 #define pte_exec(pte)           (pte_val(pte) & L_PTE_EXEC)
307 #define pte_special(pte)        (0)
308
309 #define pte_present_user(pte) \
310         ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
311          (L_PTE_PRESENT | L_PTE_USER))
312
313 #define PTE_BIT_FUNC(fn,op) \
314 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
315
316 PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
317 PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
318 PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
319 PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
320 PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
321 PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
322
323 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
324
325 #define __pgprot_modify(prot,mask,bits)         \
326         __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
327
328 /*
329  * Mark the prot value as uncacheable and unbufferable.
330  */
331 #define pgprot_noncached(prot) \
332         __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
333 #define pgprot_writecombine(prot) \
334         __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
335 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
336 #define pgprot_dmacoherent(prot) \
337         __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
338 #define __HAVE_PHYS_MEM_ACCESS_PROT
339 struct file;
340 extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
341                                      unsigned long size, pgprot_t vma_prot);
342 #else
343 #define pgprot_dmacoherent(prot) \
344         __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
345 #endif
346
347 #define pmd_none(pmd)           (!pmd_val(pmd))
348 #define pmd_present(pmd)        (pmd_val(pmd))
349 #define pmd_bad(pmd)            (pmd_val(pmd) & 2)
350
351 #define copy_pmd(pmdpd,pmdps)           \
352         do {                            \
353                 pmdpd[0] = pmdps[0];    \
354                 pmdpd[1] = pmdps[1];    \
355                 flush_pmd_entry(pmdpd); \
356         } while (0)
357
358 #define pmd_clear(pmdp)                 \
359         do {                            \
360                 pmdp[0] = __pmd(0);     \
361                 pmdp[1] = __pmd(0);     \
362                 clean_pmd_entry(pmdp);  \
363         } while (0)
364
365 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
366 {
367         unsigned long ptr;
368
369         ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
370         ptr += PTRS_PER_PTE * sizeof(void *);
371
372         return __va(ptr);
373 }
374
375 #define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
376
377 /*
378  * Conversion functions: convert a page and protection to a page entry,
379  * and a page entry and page directory to the page they refer to.
380  */
381 #define mk_pte(page,prot)       pfn_pte(page_to_pfn(page),prot)
382
383 /*
384  * The "pgd_xxx()" functions here are trivial for a folded two-level
385  * setup: the pgd is never bad, and a pmd always exists (as it's folded
386  * into the pgd entry)
387  */
388 #define pgd_none(pgd)           (0)
389 #define pgd_bad(pgd)            (0)
390 #define pgd_present(pgd)        (1)
391 #define pgd_clear(pgdp)         do { } while (0)
392 #define set_pgd(pgd,pgdp)       do { } while (0)
393
394 /* to find an entry in a page-table-directory */
395 #define pgd_index(addr)         ((addr) >> PGDIR_SHIFT)
396
397 #define pgd_offset(mm, addr)    ((mm)->pgd+pgd_index(addr))
398
399 /* to find an entry in a kernel page-table-directory */
400 #define pgd_offset_k(addr)      pgd_offset(&init_mm, addr)
401
402 /* Find an entry in the second-level page table.. */
403 #define pmd_offset(dir, addr)   ((pmd_t *)(dir))
404
405 /* Find an entry in the third-level page table.. */
406 #define __pte_index(addr)       (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
407
408 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
409 {
410         const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
411         pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
412         return pte;
413 }
414
415 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
416
417 /*
418  * Encode and decode a swap entry.  Swap entries are stored in the Linux
419  * page tables as follows:
420  *
421  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
422  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
423  *   <--------------- offset --------------------> <- type --> 0 0 0
424  *
425  * This gives us up to 63 swap files and 32GB per swap file.  Note that
426  * the offset field is always non-zero.
427  */
428 #define __SWP_TYPE_SHIFT        3
429 #define __SWP_TYPE_BITS         6
430 #define __SWP_TYPE_MASK         ((1 << __SWP_TYPE_BITS) - 1)
431 #define __SWP_OFFSET_SHIFT      (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
432
433 #define __swp_type(x)           (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
434 #define __swp_offset(x)         ((x).val >> __SWP_OFFSET_SHIFT)
435 #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
436
437 #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
438 #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
439
440 /*
441  * It is an error for the kernel to have more swap files than we can
442  * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
443  * is increased beyond what we presently support.
444  */
445 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
446
447 /*
448  * Encode and decode a file entry.  File entries are stored in the Linux
449  * page tables as follows:
450  *
451  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
452  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
453  *   <----------------------- offset ------------------------> 1 0 0
454  */
455 #define pte_file(pte)           (pte_val(pte) & L_PTE_FILE)
456 #define pte_to_pgoff(x)         (pte_val(x) >> 3)
457 #define pgoff_to_pte(x)         __pte(((x) << 3) | L_PTE_FILE)
458
459 #define PTE_FILE_MAX_BITS       29
460
461 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
462 /* FIXME: this is not correct */
463 #define kern_addr_valid(addr)   (1)
464
465 #include <asm-generic/pgtable.h>
466
467 /*
468  * We provide our own arch_get_unmapped_area to cope with VIPT caches.
469  */
470 #define HAVE_ARCH_UNMAPPED_AREA
471
472 /*
473  * remap a physical page `pfn' of size `size' with page protection `prot'
474  * into virtual address `from'
475  */
476 #define io_remap_pfn_range(vma,from,pfn,size,prot) \
477                 remap_pfn_range(vma, from, pfn, size, prot)
478
479 #define pgtable_cache_init() do { } while (0)
480
481 #endif /* !__ASSEMBLY__ */
482
483 #endif /* CONFIG_MMU */
484
485 #endif /* _ASMARM_PGTABLE_H */