Merge branch 'pci-for-jesse' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
[pandora-kernel.git] / arch / arm / include / asm / pgtable.h
1 /*
2  *  arch/arm/include/asm/pgtable.h
3  *
4  *  Copyright (C) 1995-2002 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 #ifndef _ASMARM_PGTABLE_H
11 #define _ASMARM_PGTABLE_H
12
13 #include <asm-generic/4level-fixup.h>
14 #include <asm/proc-fns.h>
15
16 #ifndef CONFIG_MMU
17
18 #include "pgtable-nommu.h"
19
20 #else
21
22 #include <asm/memory.h>
23 #include <mach/vmalloc.h>
24 #include <asm/pgtable-hwdef.h>
25
26 /*
27  * Just any arbitrary offset to the start of the vmalloc VM area: the
28  * current 8MB value just means that there will be a 8MB "hole" after the
29  * physical memory until the kernel virtual memory starts.  That means that
30  * any out-of-bounds memory accesses will hopefully be caught.
31  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
32  * area for the same reason. ;)
33  *
34  * Note that platforms may override VMALLOC_START, but they must provide
35  * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
36  * which may not overlap IO space.
37  */
38 #ifndef VMALLOC_START
39 #define VMALLOC_OFFSET          (8*1024*1024)
40 #define VMALLOC_START           (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
41 #endif
42
43 /*
44  * Hardware-wise, we have a two level page table structure, where the first
45  * level has 4096 entries, and the second level has 256 entries.  Each entry
46  * is one 32-bit word.  Most of the bits in the second level entry are used
47  * by hardware, and there aren't any "accessed" and "dirty" bits.
48  *
49  * Linux on the other hand has a three level page table structure, which can
50  * be wrapped to fit a two level page table structure easily - using the PGD
51  * and PTE only.  However, Linux also expects one "PTE" table per page, and
52  * at least a "dirty" bit.
53  *
54  * Therefore, we tweak the implementation slightly - we tell Linux that we
55  * have 2048 entries in the first level, each of which is 8 bytes (iow, two
56  * hardware pointers to the second level.)  The second level contains two
57  * hardware PTE tables arranged contiguously, followed by Linux versions
58  * which contain the state information Linux needs.  We, therefore, end up
59  * with 512 entries in the "PTE" level.
60  *
61  * This leads to the page tables having the following layout:
62  *
63  *    pgd             pte
64  * |        |
65  * +--------+ +0
66  * |        |-----> +------------+ +0
67  * +- - - - + +4    |  h/w pt 0  |
68  * |        |-----> +------------+ +1024
69  * +--------+ +8    |  h/w pt 1  |
70  * |        |       +------------+ +2048
71  * +- - - - +       | Linux pt 0 |
72  * |        |       +------------+ +3072
73  * +--------+       | Linux pt 1 |
74  * |        |       +------------+ +4096
75  *
76  * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
77  * PTE_xxx for definitions of bits appearing in the "h/w pt".
78  *
79  * PMD_xxx definitions refer to bits in the first level page table.
80  *
81  * The "dirty" bit is emulated by only granting hardware write permission
82  * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
83  * means that a write to a clean page will cause a permission fault, and
84  * the Linux MM layer will mark the page dirty via handle_pte_fault().
85  * For the hardware to notice the permission change, the TLB entry must
86  * be flushed, and ptep_set_access_flags() does that for us.
87  *
88  * The "accessed" or "young" bit is emulated by a similar method; we only
89  * allow accesses to the page if the "young" bit is set.  Accesses to the
90  * page will cause a fault, and handle_pte_fault() will set the young bit
91  * for us as long as the page is marked present in the corresponding Linux
92  * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
93  * up to date.
94  *
95  * However, when the "young" bit is cleared, we deny access to the page
96  * by clearing the hardware PTE.  Currently Linux does not flush the TLB
97  * for us in this case, which means the TLB will retain the transation
98  * until either the TLB entry is evicted under pressure, or a context
99  * switch which changes the user space mapping occurs.
100  */
101 #define PTRS_PER_PTE            512
102 #define PTRS_PER_PMD            1
103 #define PTRS_PER_PGD            2048
104
105 /*
106  * PMD_SHIFT determines the size of the area a second-level page table can map
107  * PGDIR_SHIFT determines what a third-level page table entry can map
108  */
109 #define PMD_SHIFT               21
110 #define PGDIR_SHIFT             21
111
112 #define LIBRARY_TEXT_START      0x0c000000
113
114 #ifndef __ASSEMBLY__
115 extern void __pte_error(const char *file, int line, unsigned long val);
116 extern void __pmd_error(const char *file, int line, unsigned long val);
117 extern void __pgd_error(const char *file, int line, unsigned long val);
118
119 #define pte_ERROR(pte)          __pte_error(__FILE__, __LINE__, pte_val(pte))
120 #define pmd_ERROR(pmd)          __pmd_error(__FILE__, __LINE__, pmd_val(pmd))
121 #define pgd_ERROR(pgd)          __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
122 #endif /* !__ASSEMBLY__ */
123
124 #define PMD_SIZE                (1UL << PMD_SHIFT)
125 #define PMD_MASK                (~(PMD_SIZE-1))
126 #define PGDIR_SIZE              (1UL << PGDIR_SHIFT)
127 #define PGDIR_MASK              (~(PGDIR_SIZE-1))
128
129 /*
130  * This is the lowest virtual address we can permit any user space
131  * mapping to be mapped at.  This is particularly important for
132  * non-high vector CPUs.
133  */
134 #define FIRST_USER_ADDRESS      PAGE_SIZE
135
136 #define FIRST_USER_PGD_NR       1
137 #define USER_PTRS_PER_PGD       ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
138
139 /*
140  * section address mask and size definitions.
141  */
142 #define SECTION_SHIFT           20
143 #define SECTION_SIZE            (1UL << SECTION_SHIFT)
144 #define SECTION_MASK            (~(SECTION_SIZE-1))
145
146 /*
147  * ARMv6 supersection address mask and size definitions.
148  */
149 #define SUPERSECTION_SHIFT      24
150 #define SUPERSECTION_SIZE       (1UL << SUPERSECTION_SHIFT)
151 #define SUPERSECTION_MASK       (~(SUPERSECTION_SIZE-1))
152
153 /*
154  * "Linux" PTE definitions.
155  *
156  * We keep two sets of PTEs - the hardware and the linux version.
157  * This allows greater flexibility in the way we map the Linux bits
158  * onto the hardware tables, and allows us to have YOUNG and DIRTY
159  * bits.
160  *
161  * The PTE table pointer refers to the hardware entries; the "Linux"
162  * entries are stored 1024 bytes below.
163  */
164 #define L_PTE_PRESENT           (1 << 0)
165 #define L_PTE_FILE              (1 << 1)        /* only when !PRESENT */
166 #define L_PTE_YOUNG             (1 << 1)
167 #define L_PTE_BUFFERABLE        (1 << 2)        /* matches PTE */
168 #define L_PTE_CACHEABLE         (1 << 3)        /* matches PTE */
169 #define L_PTE_USER              (1 << 4)
170 #define L_PTE_WRITE             (1 << 5)
171 #define L_PTE_EXEC              (1 << 6)
172 #define L_PTE_DIRTY             (1 << 7)
173 #define L_PTE_SHARED            (1 << 10)       /* shared(v6), coherent(xsc3) */
174
175 #ifndef __ASSEMBLY__
176
177 /*
178  * The pgprot_* and protection_map entries will be fixed up in runtime
179  * to include the cachable and bufferable bits based on memory policy,
180  * as well as any architecture dependent bits like global/ASID and SMP
181  * shared mapping bits.
182  */
183 #define _L_PTE_DEFAULT  L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
184 #define _L_PTE_READ     L_PTE_USER | L_PTE_EXEC
185
186 extern pgprot_t         pgprot_user;
187 extern pgprot_t         pgprot_kernel;
188
189 #define PAGE_NONE       pgprot_user
190 #define PAGE_COPY       __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
191 #define PAGE_SHARED     __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
192                                  L_PTE_WRITE)
193 #define PAGE_READONLY   __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
194 #define PAGE_KERNEL     pgprot_kernel
195
196 #define __PAGE_NONE     __pgprot(_L_PTE_DEFAULT)
197 #define __PAGE_COPY     __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
198 #define __PAGE_SHARED   __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
199 #define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
200
201 #endif /* __ASSEMBLY__ */
202
203 /*
204  * The table below defines the page protection levels that we insert into our
205  * Linux page table version.  These get translated into the best that the
206  * architecture can perform.  Note that on most ARM hardware:
207  *  1) We cannot do execute protection
208  *  2) If we could do execute protection, then read is implied
209  *  3) write implies read permissions
210  */
211 #define __P000  __PAGE_NONE
212 #define __P001  __PAGE_READONLY
213 #define __P010  __PAGE_COPY
214 #define __P011  __PAGE_COPY
215 #define __P100  __PAGE_READONLY
216 #define __P101  __PAGE_READONLY
217 #define __P110  __PAGE_COPY
218 #define __P111  __PAGE_COPY
219
220 #define __S000  __PAGE_NONE
221 #define __S001  __PAGE_READONLY
222 #define __S010  __PAGE_SHARED
223 #define __S011  __PAGE_SHARED
224 #define __S100  __PAGE_READONLY
225 #define __S101  __PAGE_READONLY
226 #define __S110  __PAGE_SHARED
227 #define __S111  __PAGE_SHARED
228
229 #ifndef __ASSEMBLY__
230 /*
231  * ZERO_PAGE is a global shared page that is always zero: used
232  * for zero-mapped memory areas etc..
233  */
234 extern struct page *empty_zero_page;
235 #define ZERO_PAGE(vaddr)        (empty_zero_page)
236
237 #define pte_pfn(pte)            (pte_val(pte) >> PAGE_SHIFT)
238 #define pfn_pte(pfn,prot)       (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
239
240 #define pte_none(pte)           (!pte_val(pte))
241 #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
242 #define pte_page(pte)           (pfn_to_page(pte_pfn(pte)))
243 #define pte_offset_kernel(dir,addr)     (pmd_page_vaddr(*(dir)) + __pte_index(addr))
244 #define pte_offset_map(dir,addr)        (pmd_page_vaddr(*(dir)) + __pte_index(addr))
245 #define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
246 #define pte_unmap(pte)          do { } while (0)
247 #define pte_unmap_nested(pte)   do { } while (0)
248
249 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
250
251 #define set_pte_at(mm,addr,ptep,pteval) do { \
252         set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
253  } while (0)
254
255 /*
256  * The following only work if pte_present() is true.
257  * Undefined behaviour if not..
258  */
259 #define pte_present(pte)        (pte_val(pte) & L_PTE_PRESENT)
260 #define pte_write(pte)          (pte_val(pte) & L_PTE_WRITE)
261 #define pte_dirty(pte)          (pte_val(pte) & L_PTE_DIRTY)
262 #define pte_young(pte)          (pte_val(pte) & L_PTE_YOUNG)
263 #define pte_special(pte)        (0)
264
265 /*
266  * The following only works if pte_present() is not true.
267  */
268 #define pte_file(pte)           (pte_val(pte) & L_PTE_FILE)
269 #define pte_to_pgoff(x)         (pte_val(x) >> 2)
270 #define pgoff_to_pte(x)         __pte(((x) << 2) | L_PTE_FILE)
271
272 #define PTE_FILE_MAX_BITS       30
273
274 #define PTE_BIT_FUNC(fn,op) \
275 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
276
277 PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
278 PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
279 PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
280 PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
281 PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
282 PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
283
284 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
285
286 /*
287  * Mark the prot value as uncacheable and unbufferable.
288  */
289 #define pgprot_noncached(prot)  __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
290 #define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
291
292 #define pmd_none(pmd)           (!pmd_val(pmd))
293 #define pmd_present(pmd)        (pmd_val(pmd))
294 #define pmd_bad(pmd)            (pmd_val(pmd) & 2)
295
296 #define copy_pmd(pmdpd,pmdps)           \
297         do {                            \
298                 pmdpd[0] = pmdps[0];    \
299                 pmdpd[1] = pmdps[1];    \
300                 flush_pmd_entry(pmdpd); \
301         } while (0)
302
303 #define pmd_clear(pmdp)                 \
304         do {                            \
305                 pmdp[0] = __pmd(0);     \
306                 pmdp[1] = __pmd(0);     \
307                 clean_pmd_entry(pmdp);  \
308         } while (0)
309
310 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
311 {
312         unsigned long ptr;
313
314         ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
315         ptr += PTRS_PER_PTE * sizeof(void *);
316
317         return __va(ptr);
318 }
319
320 #define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
321
322 /*
323  * Permanent address of a page. We never have highmem, so this is trivial.
324  */
325 #define pages_to_mb(x)          ((x) >> (20 - PAGE_SHIFT))
326
327 /*
328  * Conversion functions: convert a page and protection to a page entry,
329  * and a page entry and page directory to the page they refer to.
330  */
331 #define mk_pte(page,prot)       pfn_pte(page_to_pfn(page),prot)
332
333 /*
334  * The "pgd_xxx()" functions here are trivial for a folded two-level
335  * setup: the pgd is never bad, and a pmd always exists (as it's folded
336  * into the pgd entry)
337  */
338 #define pgd_none(pgd)           (0)
339 #define pgd_bad(pgd)            (0)
340 #define pgd_present(pgd)        (1)
341 #define pgd_clear(pgdp)         do { } while (0)
342 #define set_pgd(pgd,pgdp)       do { } while (0)
343
344 /* to find an entry in a page-table-directory */
345 #define pgd_index(addr)         ((addr) >> PGDIR_SHIFT)
346
347 #define pgd_offset(mm, addr)    ((mm)->pgd+pgd_index(addr))
348
349 /* to find an entry in a kernel page-table-directory */
350 #define pgd_offset_k(addr)      pgd_offset(&init_mm, addr)
351
352 /* Find an entry in the second-level page table.. */
353 #define pmd_offset(dir, addr)   ((pmd_t *)(dir))
354
355 /* Find an entry in the third-level page table.. */
356 #define __pte_index(addr)       (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
357
358 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
359 {
360         const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
361         pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
362         return pte;
363 }
364
365 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
366
367 /* Encode and decode a swap entry.
368  *
369  * We support up to 32GB of swap on 4k machines
370  */
371 #define __swp_type(x)           (((x).val >> 2) & 0x7f)
372 #define __swp_offset(x)         ((x).val >> 9)
373 #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
374 #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
375 #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
376
377 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
378 /* FIXME: this is not correct */
379 #define kern_addr_valid(addr)   (1)
380
381 #include <asm-generic/pgtable.h>
382
383 /*
384  * We provide our own arch_get_unmapped_area to cope with VIPT caches.
385  */
386 #define HAVE_ARCH_UNMAPPED_AREA
387
388 /*
389  * remap a physical page `pfn' of size `size' with page protection `prot'
390  * into virtual address `from'
391  */
392 #define io_remap_pfn_range(vma,from,pfn,size,prot) \
393                 remap_pfn_range(vma, from, pfn, size, prot)
394
395 #define pgtable_cache_init() do { } while (0)
396
397 #endif /* !__ASSEMBLY__ */
398
399 #endif /* CONFIG_MMU */
400
401 #endif /* _ASMARM_PGTABLE_H */