arch/arm/common/sharpsl_pm.c

   1 /*
   2  * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
   3  * series of PDAs
   4  *
   5  * Copyright (c) 2004-2005 Richard Purdie
   6  *
   7  * Based on code written by Sharp for 2.4 kernels
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14
  15 #undef DEBUG
  16
  17 #include <linux/module.h>
  18 #include <linux/timer.h>
  19 #include <linux/init.h>
  20 #include <linux/kernel.h>
  21 #include <linux/apm_bios.h>
  22 #include <linux/delay.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/platform_device.h>
  25
  26 #include <asm/hardware.h>
  27 #include <asm/mach-types.h>
  28 #include <asm/irq.h>
  29 #include <asm/apm.h>
  30 #include <asm/arch/pm.h>
  31 #include <asm/arch/pxa-regs.h>
  32 #include <asm/arch/sharpsl.h>
  33 #include <asm/hardware/sharpsl_pm.h>
  34
  35 /*
  36  * Constants
  37  */
  38 #define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
  39 #define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
  40 #define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
  41 #define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
  42 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
  43 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
  44 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
  45 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
  46 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
  47 #define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
  48 #define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
  49 #define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
  50
  51 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
  52 #define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
  53 #define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
  54 #define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
  55 #define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
  56 #define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
  57
  58 /*
  59  * Prototypes
  60  */
  61 static int sharpsl_off_charge_battery(void);
  62 static int sharpsl_check_battery_temp(void);
  63 static int sharpsl_check_battery_voltage(void);
  64 static int sharpsl_ac_check(void);
  65 static int sharpsl_fatal_check(void);
  66 static int sharpsl_average_value(int ad);
  67 static void sharpsl_average_clear(void);
  68 static void sharpsl_charge_toggle(void *private_);
  69 static void sharpsl_battery_thread(void *private_);
  70
  71
  72 /*
  73  * Variables
  74  */
  75 struct sharpsl_pm_status sharpsl_pm;
  76 DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
  77 DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
  78
  79
  80 static int get_percentage(int voltage)
  81 {
  82         int i = sharpsl_pm.machinfo->bat_levels - 1;
  83         struct battery_thresh *thresh;
  84
  85         if (sharpsl_pm.charge_mode == CHRG_ON)
  86                 thresh=sharpsl_pm.machinfo->bat_levels_acin;
  87         else
  88                 thresh=sharpsl_pm.machinfo->bat_levels_noac;
  89
  90         while (i > 0 && (voltage > thresh[i].voltage))
  91                 i--;
  92
  93         return thresh[i].percentage;
  94 }
  95
  96 static int get_apm_status(int voltage)
  97 {
  98         int low_thresh, high_thresh;
  99
 100         if (sharpsl_pm.charge_mode == CHRG_ON) {
 101                 high_thresh = sharpsl_pm.machinfo->status_high_acin;
 102                 low_thresh = sharpsl_pm.machinfo->status_low_acin;
 103         } else {
 104                 high_thresh = sharpsl_pm.machinfo->status_high_noac;
 105                 low_thresh = sharpsl_pm.machinfo->status_low_noac;
 106         }
 107
 108         if (voltage >= high_thresh)
 109                 return APM_BATTERY_STATUS_HIGH;
 110         if (voltage >= low_thresh)
 111                 return APM_BATTERY_STATUS_LOW;
 112         return APM_BATTERY_STATUS_CRITICAL;
 113 }
 114
 115 void sharpsl_battery_kick(void)
 116 {
 117         schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 118 }
 119 EXPORT_SYMBOL(sharpsl_battery_kick);
 120
 121
 122 static void sharpsl_battery_thread(void *private_)
 123 {
 124         int voltage, percent, apm_status, i = 0;
 125
 126         if (!sharpsl_pm.machinfo)
 127                 return;
 128
 129         sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
 130
 131         /* Corgi cannot confirm when battery fully charged so periodically kick! */
 132         if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
 133                         && time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
 134                 schedule_work(&toggle_charger);
 135
 136         while(1) {
 137                 voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 138
 139                 if (voltage > 0) break;
 140                 if (i++ > 5) {
 141                         voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
 142                         dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
 143                         break;
 144                 }
 145         }
 146
 147         voltage = sharpsl_average_value(voltage);
 148         apm_status = get_apm_status(voltage);
 149         percent = get_percentage(voltage);
 150
 151         /* At low battery voltages, the voltage has a tendency to start
 152            creeping back up so we try to avoid this here */
 153         if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
 154                 sharpsl_pm.battstat.mainbat_voltage = voltage;
 155                 sharpsl_pm.battstat.mainbat_status = apm_status;
 156                 sharpsl_pm.battstat.mainbat_percent = percent;
 157         }
 158
 159         dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
 160                         sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 161
 162         /* If battery is low. limit backlight intensity to save power. */
 163         if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 164                         && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
 165                         (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
 166                 if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
 167                         corgibl_limit_intensity(1);
 168                         sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
 169                 }
 170         } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
 171                 corgibl_limit_intensity(0);
 172                 sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
 173         }
 174
 175         /* Suspend if critical battery level */
 176         if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 177                         && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
 178                         && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
 179                 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 180                 dev_err(sharpsl_pm.dev, "Fatal Off\n");
 181                 apm_queue_event(APM_CRITICAL_SUSPEND);
 182         }
 183
 184         schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
 185 }
 186
 187 void sharpsl_pm_led(int val)
 188 {
 189         if (val == SHARPSL_LED_ERROR) {
 190                 dev_err(sharpsl_pm.dev, "Charging Error!\n");
 191         } else if (val == SHARPSL_LED_ON) {
 192                 dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
 193
 194         } else {
 195                 dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
 196
 197         }
 198 }
 199
 200 static void sharpsl_charge_on(void)
 201 {
 202         dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
 203
 204         sharpsl_pm.full_count = 0;
 205         sharpsl_pm.charge_mode = CHRG_ON;
 206         schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
 207         schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
 208 }
 209
 210 static void sharpsl_charge_off(void)
 211 {
 212         dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
 213
 214         sharpsl_pm.machinfo->charge(0);
 215         sharpsl_pm_led(SHARPSL_LED_OFF);
 216         sharpsl_pm.charge_mode = CHRG_OFF;
 217
 218         schedule_work(&sharpsl_bat);
 219 }
 220
 221 static void sharpsl_charge_error(void)
 222 {
 223         sharpsl_pm_led(SHARPSL_LED_ERROR);
 224         sharpsl_pm.machinfo->charge(0);
 225         sharpsl_pm.charge_mode = CHRG_ERROR;
 226 }
 227
 228 static void sharpsl_charge_toggle(void *private_)
 229 {
 230         dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
 231
 232         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 233                 sharpsl_charge_off();
 234                 return;
 235         } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
 236                 sharpsl_charge_error();
 237                 return;
 238         }
 239
 240         sharpsl_pm_led(SHARPSL_LED_ON);
 241         sharpsl_pm.machinfo->charge(0);
 242         mdelay(SHARPSL_CHARGE_WAIT_TIME);
 243         sharpsl_pm.machinfo->charge(1);
 244
 245         sharpsl_pm.charge_start_time = jiffies;
 246 }
 247
 248 static void sharpsl_ac_timer(unsigned long data)
 249 {
 250         int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 251
 252         dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
 253
 254         sharpsl_average_clear();
 255         if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
 256                 sharpsl_charge_on();
 257         else if (sharpsl_pm.charge_mode == CHRG_ON)
 258                 sharpsl_charge_off();
 259
 260         schedule_work(&sharpsl_bat);
 261 }
 262
 263
 264 irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
 265 {
 266         /* Delay the event slightly to debounce */
 267         /* Must be a smaller delay than the chrg_full_isr below */
 268         mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
 269
 270         return IRQ_HANDLED;
 271 }
 272
 273 static void sharpsl_chrg_full_timer(unsigned long data)
 274 {
 275         dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
 276
 277         sharpsl_pm.full_count++;
 278
 279         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 280                 dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
 281                 if (sharpsl_pm.charge_mode == CHRG_ON)
 282                         sharpsl_charge_off();
 283         } else if (sharpsl_pm.full_count < 2) {
 284                 dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
 285                 schedule_work(&toggle_charger);
 286         } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
 287                 dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
 288                 schedule_work(&toggle_charger);
 289         } else {
 290                 sharpsl_charge_off();
 291                 sharpsl_pm.charge_mode = CHRG_DONE;
 292                 dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
 293         }
 294 }
 295
 296 /* Charging Finished Interrupt (Not present on Corgi) */
 297 /* Can trigger at the same time as an AC staus change so
 298    delay until after that has been processed */
 299 irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
 300 {
 301         if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
 302                 return IRQ_HANDLED;
 303
 304         /* delay until after any ac interrupt */
 305         mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
 306
 307         return IRQ_HANDLED;
 308 }
 309
 310 irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
 311 {
 312         int is_fatal = 0;
 313
 314         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
 315                 dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
 316                 is_fatal = 1;
 317         }
 318
 319         if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
 320                 dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
 321                 is_fatal = 1;
 322         }
 323
 324         if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
 325                 sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 326                 apm_queue_event(APM_CRITICAL_SUSPEND);
 327         }
 328
 329         return IRQ_HANDLED;
 330 }
 331
 332 /*
 333  * Maintain an average of the last 10 readings
 334  */
 335 #define SHARPSL_CNV_VALUE_NUM    10
 336 static int sharpsl_ad_index;
 337
 338 static void sharpsl_average_clear(void)
 339 {
 340         sharpsl_ad_index = 0;
 341 }
 342
 343 static int sharpsl_average_value(int ad)
 344 {
 345         int i, ad_val = 0;
 346         static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
 347
 348         if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
 349                 sharpsl_ad_index = 0;
 350                 return ad;
 351         }
 352
 353         sharpsl_ad[sharpsl_ad_index] = ad;
 354         sharpsl_ad_index++;
 355         if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
 356                 for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
 357                         sharpsl_ad[i] = sharpsl_ad[i+1];
 358                 sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
 359         }
 360         for (i=0; i < sharpsl_ad_index; i++)
 361                 ad_val += sharpsl_ad[i];
 362
 363         return (ad_val / sharpsl_ad_index);
 364 }
 365
 366 /*
 367  * Take an array of 5 integers, remove the maximum and minimum values
 368  * and return the average.
 369  */
 370 static int get_select_val(int *val)
 371 {
 372         int i, j, k, temp, sum = 0;
 373
 374         /* Find MAX val */
 375         temp = val[0];
 376         j=0;
 377         for (i=1; i<5; i++) {
 378                 if (temp < val[i]) {
 379                         temp = val[i];
 380                         j = i;
 381                 }
 382         }
 383
 384         /* Find MIN val */
 385         temp = val[4];
 386         k=4;
 387         for (i=3; i>=0; i--) {
 388                 if (temp > val[i]) {
 389                         temp = val[i];
 390                         k = i;
 391                 }
 392         }
 393
 394         for (i=0; i<5; i++)
 395                 if (i != j && i != k )
 396                         sum += val[i];
 397
 398         dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
 399
 400         return (sum/3);
 401 }
 402
 403 static int sharpsl_check_battery_temp(void)
 404 {
 405         int val, i, buff[5];
 406
 407         /* Check battery temperature */
 408         for (i=0; i<5; i++) {
 409                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 410                 sharpsl_pm.machinfo->measure_temp(1);
 411                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 412                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
 413                 sharpsl_pm.machinfo->measure_temp(0);
 414         }
 415
 416         val = get_select_val(buff);
 417
 418         dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
 419         if (val > SHARPSL_CHARGE_ON_TEMP)
 420                 return -1;
 421
 422         return 0;
 423 }
 424
 425 static int sharpsl_check_battery_voltage(void)
 426 {
 427         int val, i, buff[5];
 428
 429         /* disable charge, enable discharge */
 430         sharpsl_pm.machinfo->charge(0);
 431         sharpsl_pm.machinfo->discharge(1);
 432         mdelay(SHARPSL_WAIT_DISCHARGE_ON);
 433
 434         if (sharpsl_pm.machinfo->discharge1)
 435                 sharpsl_pm.machinfo->discharge1(1);
 436
 437         /* Check battery voltage */
 438         for (i=0; i<5; i++) {
 439                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 440                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 441         }
 442
 443         if (sharpsl_pm.machinfo->discharge1)
 444                 sharpsl_pm.machinfo->discharge1(0);
 445
 446         sharpsl_pm.machinfo->discharge(0);
 447
 448         val = get_select_val(buff);
 449         dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
 450
 451         if (val < SHARPSL_CHARGE_ON_VOLT)
 452                 return -1;
 453
 454         return 0;
 455 }
 456
 457 static int sharpsl_ac_check(void)
 458 {
 459         int temp, i, buff[5];
 460
 461         for (i=0; i<5; i++) {
 462                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
 463                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
 464         }
 465
 466         temp = get_select_val(buff);
 467         dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
 468
 469         if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
 470                 dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
 471                 return -1;
 472         }
 473
 474         return 0;
 475 }
 476
 477 #ifdef CONFIG_PM
 478 static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
 479 {
 480         sharpsl_pm.flags |= SHARPSL_SUSPENDED;
 481         flush_scheduled_work();
 482
 483         if (sharpsl_pm.charge_mode == CHRG_ON)
 484                 sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
 485         else
 486                 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
 487
 488         return 0;
 489 }
 490
 491 static int sharpsl_pm_resume(struct platform_device *pdev)
 492 {
 493         /* Clear the reset source indicators as they break the bootloader upon reboot */
 494         RCSR = 0x0f;
 495         sharpsl_average_clear();
 496         sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
 497         sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
 498
 499         return 0;
 500 }
 501
 502 static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 503 {
 504         dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
 505
 506         dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
 507         /* not charging and AC-IN! */
 508
 509         if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
 510                 dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
 511                 sharpsl_pm.charge_mode = CHRG_OFF;
 512                 sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
 513                 sharpsl_off_charge_battery();
 514         }
 515
 516         sharpsl_pm.machinfo->presuspend();
 517
 518         PEDR = 0xffffffff; /* clear it */
 519
 520         sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
 521         if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
 522                 RTSR &= RTSR_ALE;
 523                 RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
 524                 dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
 525                 sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
 526         } else if (alarm_enable) {
 527                 RTSR &= RTSR_ALE;
 528                 RTAR = alarm_time;
 529                 dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
 530         } else {
 531                 dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
 532         }
 533
 534         pxa_pm_enter(state);
 535
 536         sharpsl_pm.machinfo->postsuspend();
 537
 538         dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
 539 }
 540
 541 static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 542 {
 543         if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
 544         {
 545                 if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
 546                         dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
 547                         corgi_goto_sleep(alarm_time, alarm_enable, state);
 548                         return 1;
 549                 }
 550                 if(sharpsl_off_charge_battery()) {
 551                         dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
 552                         corgi_goto_sleep(alarm_time, alarm_enable, state);
 553                         return 1;
 554                 }
 555                 dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
 556         }
 557
 558         if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
 559         {
 560                 dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
 561                 corgi_goto_sleep(alarm_time, alarm_enable, state);
 562                 return 1;
 563         }
 564
 565         return 0;
 566 }
 567
 568 static int corgi_pxa_pm_enter(suspend_state_t state)
 569 {
 570         unsigned long alarm_time = RTAR;
 571         unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
 572
 573         dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
 574
 575         corgi_goto_sleep(alarm_time, alarm_status, state);
 576
 577         while (corgi_enter_suspend(alarm_time,alarm_status,state))
 578                 {}
 579
 580         dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
 581
 582         return 0;
 583 }
 584 #endif
 585
 586
 587 /*
 588  * Check for fatal battery errors
 589  * Fatal returns -1
 590  */
 591 static int sharpsl_fatal_check(void)
 592 {
 593         int buff[5], temp, i, acin;
 594
 595         dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
 596
 597         /* Check AC-Adapter */
 598         acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 599
 600         if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
 601                 sharpsl_pm.machinfo->charge(0);
 602                 udelay(100);
 603                 sharpsl_pm.machinfo->discharge(1);      /* enable discharge */
 604                 mdelay(SHARPSL_WAIT_DISCHARGE_ON);
 605         }
 606
 607         if (sharpsl_pm.machinfo->discharge1)
 608                 sharpsl_pm.machinfo->discharge1(1);
 609
 610         /* Check battery : check inserting battery ? */
 611         for (i=0; i<5; i++) {
 612                 buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 613                 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 614         }
 615
 616         if (sharpsl_pm.machinfo->discharge1)
 617                 sharpsl_pm.machinfo->discharge1(0);
 618
 619         if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
 620                 udelay(100);
 621                 sharpsl_pm.machinfo->charge(1);
 622                 sharpsl_pm.machinfo->discharge(0);
 623         }
 624
 625         temp = get_select_val(buff);
 626         dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
 627
 628         if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
 629                         (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
 630                 return -1;
 631         return 0;
 632 }
 633
 634 static int sharpsl_off_charge_error(void)
 635 {
 636         dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
 637         sharpsl_pm.machinfo->charge(0);
 638         sharpsl_pm_led(SHARPSL_LED_ERROR);
 639         sharpsl_pm.charge_mode = CHRG_ERROR;
 640         return 1;
 641 }
 642
 643 /*
 644  * Charging Control while suspended
 645  * Return 1 - go straight to sleep
 646  * Return 0 - sleep or wakeup depending on other factors
 647  */
 648 static int sharpsl_off_charge_battery(void)
 649 {
 650         int time;
 651
 652         dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
 653
 654         if (sharpsl_pm.charge_mode == CHRG_OFF) {
 655                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
 656
 657                 /* AC Check */
 658                 if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
 659                         return sharpsl_off_charge_error();
 660
 661                 /* Start Charging */
 662                 sharpsl_pm_led(SHARPSL_LED_ON);
 663                 sharpsl_pm.machinfo->charge(0);
 664                 mdelay(SHARPSL_CHARGE_WAIT_TIME);
 665                 sharpsl_pm.machinfo->charge(1);
 666
 667                 sharpsl_pm.charge_mode = CHRG_ON;
 668                 sharpsl_pm.full_count = 0;
 669
 670                 return 1;
 671         } else if (sharpsl_pm.charge_mode != CHRG_ON) {
 672                 return 1;
 673         }
 674
 675         if (sharpsl_pm.full_count == 0) {
 676                 int time;
 677
 678                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
 679
 680                 if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
 681                         return sharpsl_off_charge_error();
 682
 683                 sharpsl_pm.machinfo->charge(0);
 684                 mdelay(SHARPSL_CHARGE_WAIT_TIME);
 685                 sharpsl_pm.machinfo->charge(1);
 686                 sharpsl_pm.charge_mode = CHRG_ON;
 687
 688                 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 689
 690                 time = RCNR;
 691                 while(1) {
 692                         /* Check if any wakeup event had occured */
 693                         if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 694                                 return 0;
 695                         /* Check for timeout */
 696                         if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
 697                                 return 1;
 698                         if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
 699                                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
 700                                 sharpsl_pm.full_count++;
 701                                 sharpsl_pm.machinfo->charge(0);
 702                                 mdelay(SHARPSL_CHARGE_WAIT_TIME);
 703                                 sharpsl_pm.machinfo->charge(1);
 704                                 return 1;
 705                         }
 706                 }
 707         }
 708
 709         dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
 710
 711         mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 712
 713         time = RCNR;
 714         while(1) {
 715                 /* Check if any wakeup event had occured */
 716                 if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 717                         return 0;
 718                 /* Check for timeout */
 719                 if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
 720                         if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
 721                                 dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
 722                                 sharpsl_pm.full_count = 0;
 723                         }
 724                         sharpsl_pm.full_count++;
 725                         return 1;
 726                 }
 727                 if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
 728                         dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
 729                         sharpsl_pm_led(SHARPSL_LED_OFF);
 730                         sharpsl_pm.machinfo->charge(0);
 731                         sharpsl_pm.charge_mode = CHRG_DONE;
 732                         return 1;
 733                 }
 734         }
 735 }
 736
 737
 738 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
 739 {
 740         return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
 741 }
 742
 743 static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
 744 {
 745         return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
 746 }
 747
 748 static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
 749 static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
 750
 751 extern void (*apm_get_power_status)(struct apm_power_info *);
 752
 753 static void sharpsl_apm_get_power_status(struct apm_power_info *info)
 754 {
 755         info->ac_line_status = sharpsl_pm.battstat.ac_status;
 756
 757         if (sharpsl_pm.charge_mode == CHRG_ON)
 758                 info->battery_status = APM_BATTERY_STATUS_CHARGING;
 759         else
 760                 info->battery_status = sharpsl_pm.battstat.mainbat_status;
 761
 762         info->battery_flag = (1 << info->battery_status);
 763         info->battery_life = sharpsl_pm.battstat.mainbat_percent;
 764 }
 765
 766 static struct pm_ops sharpsl_pm_ops = {
 767         .pm_disk_mode   = PM_DISK_FIRMWARE,
 768         .prepare        = pxa_pm_prepare,
 769         .enter          = corgi_pxa_pm_enter,
 770         .finish         = pxa_pm_finish,
 771 };
 772
 773 static int __init sharpsl_pm_probe(struct platform_device *pdev)
 774 {
 775         if (!pdev->dev.platform_data)
 776                 return -EINVAL;
 777
 778         sharpsl_pm.dev = &pdev->dev;
 779         sharpsl_pm.machinfo = pdev->dev.platform_data;
 780         sharpsl_pm.charge_mode = CHRG_OFF;
 781         sharpsl_pm.flags = 0;
 782
 783         init_timer(&sharpsl_pm.ac_timer);
 784         sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
 785
 786         init_timer(&sharpsl_pm.chrg_full_timer);
 787         sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
 788
 789         sharpsl_pm.machinfo->init();
 790
 791         device_create_file(&pdev->dev, &dev_attr_battery_percentage);
 792         device_create_file(&pdev->dev, &dev_attr_battery_voltage);
 793
 794         apm_get_power_status = sharpsl_apm_get_power_status;
 795
 796         pm_set_ops(&sharpsl_pm_ops);
 797
 798         mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
 799
 800         return 0;
 801 }
 802
 803 static int sharpsl_pm_remove(struct platform_device *pdev)
 804 {
 805         pm_set_ops(NULL);
 806
 807         device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
 808         device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
 809
 810         sharpsl_pm.machinfo->exit();
 811
 812         del_timer_sync(&sharpsl_pm.chrg_full_timer);
 813         del_timer_sync(&sharpsl_pm.ac_timer);
 814
 815         return 0;
 816 }
 817
 818 static struct platform_driver sharpsl_pm_driver = {
 819         .probe          = sharpsl_pm_probe,
 820         .remove         = sharpsl_pm_remove,
 821         .suspend        = sharpsl_pm_suspend,
 822         .resume         = sharpsl_pm_resume,
 823         .driver         = {
 824                 .name           = "sharpsl-pm",
 825         },
 826 };
 827
 828 static int __devinit sharpsl_pm_init(void)
 829 {
 830         return platform_driver_register(&sharpsl_pm_driver);
 831 }
 832
 833 static void sharpsl_pm_exit(void)
 834 {
 835         platform_driver_unregister(&sharpsl_pm_driver);
 836 }
 837
 838 late_initcall(sharpsl_pm_init);
 839 module_exit(sharpsl_pm_exit);