arch/arm/boot/dts/vfxxx.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  */
   9
  10 #include "vf610-pinfunc.h"
  11 #include <dt-bindings/clock/vf610-clock.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         aliases {
  17                 can0 = &can0;
  18                 can1 = &can1;
  19                 serial0 = &uart0;
  20                 serial1 = &uart1;
  21                 serial2 = &uart2;
  22                 serial3 = &uart3;
  23                 serial4 = &uart4;
  24                 serial5 = &uart5;
  25                 gpio0 = &gpio0;
  26                 gpio1 = &gpio1;
  27                 gpio2 = &gpio2;
  28                 gpio3 = &gpio3;
  29                 gpio4 = &gpio4;
  30                 usbphy0 = &usbphy0;
  31                 usbphy1 = &usbphy1;
  32         };
  33
  34         fxosc: fxosc {
  35                 compatible = "fixed-clock";
  36                 #clock-cells = <0>;
  37                 clock-frequency = <24000000>;
  38         };
  39
  40         sxosc: sxosc {
  41                 compatible = "fixed-clock";
  42                 #clock-cells = <0>;
  43                 clock-frequency = <32768>;
  44         };
  45
  46         reboot: syscon-reboot {
  47                 compatible = "syscon-reboot";
  48                 regmap = <&src>;
  49                 offset = <0x0>;
  50                 mask = <0x1000>;
  51         };
  52
  53         soc {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "simple-bus";
  57                 ranges;
  58
  59                 aips0: aips-bus@40000000 {
  60                         compatible = "fsl,aips-bus", "simple-bus";
  61                         #address-cells = <1>;
  62                         #size-cells = <1>;
  63                         ranges;
  64
  65                         edma0: dma-controller@40018000 {
  66                                 #dma-cells = <2>;
  67                                 compatible = "fsl,vf610-edma";
  68                                 reg = <0x40018000 0x2000>,
  69                                         <0x40024000 0x1000>,
  70                                         <0x40025000 0x1000>;
  71                                 dma-channels = <32>;
  72                                 clock-names = "dmamux0", "dmamux1";
  73                                 clocks = <&clks VF610_CLK_DMAMUX0>,
  74                                         <&clks VF610_CLK_DMAMUX1>;
  75                                 status = "disabled";
  76                         };
  77
  78                         can0: flexcan@40020000 {
  79                                 compatible = "fsl,vf610-flexcan";
  80                                 reg = <0x40020000 0x4000>;
  81                                 clocks = <&clks VF610_CLK_FLEXCAN0>,
  82                                          <&clks VF610_CLK_FLEXCAN0>;
  83                                 clock-names = "ipg", "per";
  84                                 status = "disabled";
  85                         };
  86
  87                         uart0: serial@40027000 {
  88                                 compatible = "fsl,vf610-lpuart";
  89                                 reg = <0x40027000 0x1000>;
  90                                 clocks = <&clks VF610_CLK_UART0>;
  91                                 clock-names = "ipg";
  92                                 dmas = <&edma0 0 2>,
  93                                         <&edma0 0 3>;
  94                                 dma-names = "rx","tx";
  95                                 status = "disabled";
  96                         };
  97
  98                         uart1: serial@40028000 {
  99                                 compatible = "fsl,vf610-lpuart";
 100                                 reg = <0x40028000 0x1000>;
 101                                 clocks = <&clks VF610_CLK_UART1>;
 102                                 clock-names = "ipg";
 103                                 dmas = <&edma0 0 4>,
 104                                         <&edma0 0 5>;
 105                                 dma-names = "rx","tx";
 106                                 status = "disabled";
 107                         };
 108
 109                         uart2: serial@40029000 {
 110                                 compatible = "fsl,vf610-lpuart";
 111                                 reg = <0x40029000 0x1000>;
 112                                 clocks = <&clks VF610_CLK_UART2>;
 113                                 clock-names = "ipg";
 114                                 dmas = <&edma0 0 6>,
 115                                         <&edma0 0 7>;
 116                                 dma-names = "rx","tx";
 117                                 status = "disabled";
 118                         };
 119
 120                         uart3: serial@4002a000 {
 121                                 compatible = "fsl,vf610-lpuart";
 122                                 reg = <0x4002a000 0x1000>;
 123                                 clocks = <&clks VF610_CLK_UART3>;
 124                                 clock-names = "ipg";
 125                                 dmas = <&edma0 0 8>,
 126                                         <&edma0 0 9>;
 127                                 dma-names = "rx","tx";
 128                                 status = "disabled";
 129                         };
 130
 131                         dspi0: dspi0@4002c000 {
 132                                 #address-cells = <1>;
 133                                 #size-cells = <0>;
 134                                 compatible = "fsl,vf610-dspi";
 135                                 reg = <0x4002c000 0x1000>;
 136                                 clocks = <&clks VF610_CLK_DSPI0>;
 137                                 clock-names = "dspi";
 138                                 spi-num-chipselects = <5>;
 139                                 status = "disabled";
 140                         };
 141
 142                         sai2: sai@40031000 {
 143                                 compatible = "fsl,vf610-sai";
 144                                 reg = <0x40031000 0x1000>;
 145                                 clocks = <&clks VF610_CLK_SAI2>;
 146                                 clock-names = "sai";
 147                                 dma-names = "tx", "rx";
 148                                 dmas = <&edma0 0 21>,
 149                                         <&edma0 0 20>;
 150                                 status = "disabled";
 151                         };
 152
 153                         pit: pit@40037000 {
 154                                 compatible = "fsl,vf610-pit";
 155                                 reg = <0x40037000 0x1000>;
 156                                 clocks = <&clks VF610_CLK_PIT>;
 157                                 clock-names = "pit";
 158                         };
 159
 160                         pwm0: pwm@40038000 {
 161                                 compatible = "fsl,vf610-ftm-pwm";
 162                                 #pwm-cells = <3>;
 163                                 reg = <0x40038000 0x1000>;
 164                                 clock-names = "ftm_sys", "ftm_ext",
 165                                               "ftm_fix", "ftm_cnt_clk_en";
 166                                 clocks = <&clks VF610_CLK_FTM0>,
 167                                         <&clks VF610_CLK_FTM0_EXT_SEL>,
 168                                         <&clks VF610_CLK_FTM0_FIX_SEL>,
 169                                         <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 170                                 status = "disabled";
 171                         };
 172
 173                         pwm1: pwm@40039000 {
 174                                 compatible = "fsl,vf610-ftm-pwm";
 175                                 #pwm-cells = <3>;
 176                                 reg = <0x40039000 0x1000>;
 177                                 clock-names = "ftm_sys", "ftm_ext",
 178                                               "ftm_fix", "ftm_cnt_clk_en";
 179                                 clocks = <&clks VF610_CLK_FTM1>,
 180                                         <&clks VF610_CLK_FTM1_EXT_SEL>,
 181                                         <&clks VF610_CLK_FTM1_FIX_SEL>,
 182                                         <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 183                                 status = "disabled";
 184                         };
 185
 186                         adc0: adc@4003b000 {
 187                                 compatible = "fsl,vf610-adc";
 188                                 reg = <0x4003b000 0x1000>;
 189                                 clocks = <&clks VF610_CLK_ADC0>;
 190                                 clock-names = "adc";
 191                                 status = "disabled";
 192                         };
 193
 194                         wdoga5: wdog@4003e000 {
 195                                 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 196                                 reg = <0x4003e000 0x1000>;
 197                                 clocks = <&clks VF610_CLK_WDT>;
 198                                 clock-names = "wdog";
 199                                 status = "disabled";
 200                         };
 201
 202                         qspi0: quadspi@40044000 {
 203                                 #address-cells = <1>;
 204                                 #size-cells = <0>;
 205                                 compatible = "fsl,vf610-qspi";
 206                                 reg = <0x40044000 0x1000>;
 207                                 clocks = <&clks VF610_CLK_QSPI0_EN>,
 208                                         <&clks VF610_CLK_QSPI0>;
 209                                 clock-names = "qspi_en", "qspi";
 210                                 status = "disabled";
 211                         };
 212
 213                         iomuxc: iomuxc@40048000 {
 214                                 compatible = "fsl,vf610-iomuxc";
 215                                 reg = <0x40048000 0x1000>;
 216                                 #gpio-range-cells = <3>;
 217                         };
 218
 219                         gpio0: gpio@40049000 {
 220                                 compatible = "fsl,vf610-gpio";
 221                                 reg = <0x40049000 0x1000 0x400ff000 0x40>;
 222                                 gpio-controller;
 223                                 #gpio-cells = <2>;
 224                                 interrupt-controller;
 225                                 #interrupt-cells = <2>;
 226                                 gpio-ranges = <&iomuxc 0 0 32>;
 227                         };
 228
 229                         gpio1: gpio@4004a000 {
 230                                 compatible = "fsl,vf610-gpio";
 231                                 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 232                                 gpio-controller;
 233                                 #gpio-cells = <2>;
 234                                 interrupt-controller;
 235                                 #interrupt-cells = <2>;
 236                                 gpio-ranges = <&iomuxc 0 32 32>;
 237                         };
 238
 239                         gpio2: gpio@4004b000 {
 240                                 compatible = "fsl,vf610-gpio";
 241                                 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 242                                 gpio-controller;
 243                                 #gpio-cells = <2>;
 244                                 interrupt-controller;
 245                                 #interrupt-cells = <2>;
 246                                 gpio-ranges = <&iomuxc 0 64 32>;
 247                         };
 248
 249                         gpio3: gpio@4004c000 {
 250                                 compatible = "fsl,vf610-gpio";
 251                                 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 252                                 gpio-controller;
 253                                 #gpio-cells = <2>;
 254                                 interrupt-controller;
 255                                 #interrupt-cells = <2>;
 256                                 gpio-ranges = <&iomuxc 0 96 32>;
 257                         };
 258
 259                         gpio4: gpio@4004d000 {
 260                                 compatible = "fsl,vf610-gpio";
 261                                 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 262                                 gpio-controller;
 263                                 #gpio-cells = <2>;
 264                                 interrupt-controller;
 265                                 #interrupt-cells = <2>;
 266                                 gpio-ranges = <&iomuxc 0 128 7>;
 267                         };
 268
 269                         anatop: anatop@40050000 {
 270                                 compatible = "fsl,vf610-anatop", "syscon";
 271                                 reg = <0x40050000 0x400>;
 272                         };
 273
 274                         usbphy0: usbphy@40050800 {
 275                                 compatible = "fsl,vf610-usbphy";
 276                                 reg = <0x40050800 0x400>;
 277                                 clocks = <&clks VF610_CLK_USBPHY0>;
 278                                 fsl,anatop = <&anatop>;
 279                                 status = "disabled";
 280                         };
 281
 282                         usbphy1: usbphy@40050c00 {
 283                                 compatible = "fsl,vf610-usbphy";
 284                                 reg = <0x40050c00 0x400>;
 285                                 clocks = <&clks VF610_CLK_USBPHY1>;
 286                                 fsl,anatop = <&anatop>;
 287                                 status = "disabled";
 288                         };
 289
 290                         i2c0: i2c@40066000 {
 291                                 #address-cells = <1>;
 292                                 #size-cells = <0>;
 293                                 compatible = "fsl,vf610-i2c";
 294                                 reg = <0x40066000 0x1000>;
 295                                 clocks = <&clks VF610_CLK_I2C0>;
 296                                 clock-names = "ipg";
 297                                 dmas = <&edma0 0 50>,
 298                                         <&edma0 0 51>;
 299                                 dma-names = "rx","tx";
 300                                 status = "disabled";
 301                         };
 302
 303                         clks: ccm@4006b000 {
 304                                 compatible = "fsl,vf610-ccm";
 305                                 reg = <0x4006b000 0x1000>;
 306                                 clocks = <&sxosc>, <&fxosc>;
 307                                 clock-names = "sxosc", "fxosc";
 308                                 #clock-cells = <1>;
 309                         };
 310
 311                         usbdev0: usb@40034000 {
 312                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 313                                 reg = <0x40034000 0x800>;
 314                                 clocks = <&clks VF610_CLK_USBC0>;
 315                                 fsl,usbphy = <&usbphy0>;
 316                                 fsl,usbmisc = <&usbmisc0 0>;
 317                                 dr_mode = "peripheral";
 318                                 status = "disabled";
 319                         };
 320
 321                         usbmisc0: usb@40034800 {
 322                                 #index-cells = <1>;
 323                                 compatible = "fsl,vf610-usbmisc";
 324                                 reg = <0x40034800 0x200>;
 325                                 clocks = <&clks VF610_CLK_USBC0>;
 326                                 status = "disabled";
 327                         };
 328
 329                         src: src@4006e000 {
 330                                 compatible = "fsl,vf610-src", "syscon";
 331                                 reg = <0x4006e000 0x1000>;
 332                         };
 333                 };
 334
 335                 aips1: aips-bus@40080000 {
 336                         compatible = "fsl,aips-bus", "simple-bus";
 337                         #address-cells = <1>;
 338                         #size-cells = <1>;
 339                         ranges;
 340
 341                         edma1: dma-controller@40098000 {
 342                                 #dma-cells = <2>;
 343                                 compatible = "fsl,vf610-edma";
 344                                 reg = <0x40098000 0x2000>,
 345                                         <0x400a1000 0x1000>,
 346                                         <0x400a2000 0x1000>;
 347                                 dma-channels = <32>;
 348                                 clock-names = "dmamux0", "dmamux1";
 349                                 clocks = <&clks VF610_CLK_DMAMUX2>,
 350                                         <&clks VF610_CLK_DMAMUX3>;
 351                                 status = "disabled";
 352                         };
 353
 354                         snvs0: snvs@400a7000 {
 355                             compatible = "fsl,sec-v4.0-mon", "simple-bus";
 356                                 #address-cells = <1>;
 357                                 #size-cells = <1>;
 358                                 ranges = <0 0x400a7000 0x2000>;
 359
 360                                 snvsrtc: snvs-rtc-lp@34 {
 361                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 362                                         reg = <0x34 0x58>;
 363                                         clocks = <&clks VF610_CLK_SNVS>;
 364                                         clock-names = "snvs-rtc";
 365                                 };
 366                         };
 367
 368                         uart4: serial@400a9000 {
 369                                 compatible = "fsl,vf610-lpuart";
 370                                 reg = <0x400a9000 0x1000>;
 371                                 clocks = <&clks VF610_CLK_UART4>;
 372                                 clock-names = "ipg";
 373                                 status = "disabled";
 374                         };
 375
 376                         uart5: serial@400aa000 {
 377                                 compatible = "fsl,vf610-lpuart";
 378                                 reg = <0x400aa000 0x1000>;
 379                                 clocks = <&clks VF610_CLK_UART5>;
 380                                 clock-names = "ipg";
 381                                 status = "disabled";
 382                         };
 383
 384                         adc1: adc@400bb000 {
 385                                 compatible = "fsl,vf610-adc";
 386                                 reg = <0x400bb000 0x1000>;
 387                                 clocks = <&clks VF610_CLK_ADC1>;
 388                                 clock-names = "adc";
 389                                 status = "disabled";
 390                         };
 391
 392                         esdhc1: esdhc@400b2000 {
 393                                 compatible = "fsl,imx53-esdhc";
 394                                 reg = <0x400b2000 0x1000>;
 395                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 396                                         <&clks VF610_CLK_PLATFORM_BUS>,
 397                                         <&clks VF610_CLK_ESDHC1>;
 398                                 clock-names = "ipg", "ahb", "per";
 399                                 status = "disabled";
 400                         };
 401
 402                         usbh1: usb@400b4000 {
 403                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 404                                 reg = <0x400b4000 0x800>;
 405                                 clocks = <&clks VF610_CLK_USBC1>;
 406                                 fsl,usbphy = <&usbphy1>;
 407                                 fsl,usbmisc = <&usbmisc1 0>;
 408                                 dr_mode = "host";
 409                                 status = "disabled";
 410                         };
 411
 412                         usbmisc1: usb@400b4800 {
 413                                 #index-cells = <1>;
 414                                 compatible = "fsl,vf610-usbmisc";
 415                                 reg = <0x400b4800 0x200>;
 416                                 clocks = <&clks VF610_CLK_USBC1>;
 417                                 status = "disabled";
 418                         };
 419
 420                         ftm: ftm@400b8000 {
 421                                 compatible = "fsl,ftm-timer";
 422                                 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 423                                 clock-names = "ftm-evt", "ftm-src",
 424                                         "ftm-evt-counter-en", "ftm-src-counter-en";
 425                                 clocks = <&clks VF610_CLK_FTM2>,
 426                                         <&clks VF610_CLK_FTM3>,
 427                                         <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 428                                         <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 429                                 status = "disabled";
 430                         };
 431
 432                         fec0: ethernet@400d0000 {
 433                                 compatible = "fsl,mvf600-fec";
 434                                 reg = <0x400d0000 0x1000>;
 435                                 clocks = <&clks VF610_CLK_ENET0>,
 436                                         <&clks VF610_CLK_ENET0>,
 437                                         <&clks VF610_CLK_ENET>;
 438                                 clock-names = "ipg", "ahb", "ptp";
 439                                 status = "disabled";
 440                         };
 441
 442                         fec1: ethernet@400d1000 {
 443                                 compatible = "fsl,mvf600-fec";
 444                                 reg = <0x400d1000 0x1000>;
 445                                 clocks = <&clks VF610_CLK_ENET1>,
 446                                         <&clks VF610_CLK_ENET1>,
 447                                         <&clks VF610_CLK_ENET>;
 448                                 clock-names = "ipg", "ahb", "ptp";
 449                                 status = "disabled";
 450                         };
 451
 452                         can1: flexcan@400d4000 {
 453                                 compatible = "fsl,vf610-flexcan";
 454                                 reg = <0x400d4000 0x4000>;
 455                                 clocks = <&clks VF610_CLK_FLEXCAN1>,
 456                                          <&clks VF610_CLK_FLEXCAN1>;
 457                                 clock-names = "ipg", "per";
 458                                 status = "disabled";
 459                         };
 460
 461                 };
 462         };
 463 };