arch/arm/boot/compressed/head-sharpsl.S

   1 /*
   2  * linux/arch/arm/boot/compressed/head-sharpsl.S
   3  *
   4  * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
   5  *
   6  * Sharp's bootloader doesn't pass any kind of machine ID
   7  * so we have to figure out the machine for ourselves...
   8  *
   9  * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
  10  * and Husky (SL-C760).
  11  *
  12  */
  13
  14 #include <linux/config.h>
  15 #include <linux/linkage.h>
  16 #include <asm/mach-types.h>
  17
  18 #ifndef CONFIG_PXA_SHARPSL
  19 #error What am I doing here...
  20 #endif
  21
  22                 .section        ".start", "ax"
  23
  24 __SharpSL_start:
  25
  26         ldr     r1, .W100ADDR           @ Base address of w100 chip + regs offset
  27
  28         mov r6, #0x31                   @ Load Magic Init value
  29         str     r6, [r1, #0x280]        @ to SCRATCH_UMSK
  30         mov r5, #0x3000
  31 .W100LOOP:
  32         subs r5, r5, #1
  33     bne .W100LOOP
  34         mov r6, #0x30                   @ Load 2nd Magic Init value
  35         str     r6, [r1, #0x280]        @ to SCRATCH_UMSK
  36
  37         ldr     r6, [r1, #0]            @ Load Chip ID
  38         ldr     r3, .W100ID
  39         ldr     r7, .POODLEID
  40         cmp     r6, r3
  41         bne     .SHARPEND                       @ We have no w100 - Poodle
  42
  43         mrc p15, 0, r6, c0, c0  @ Get Processor ID
  44         and     r6, r6, #0xffffff00
  45         ldr     r7, .CORGIID
  46         ldr     r3, .PXA255ID
  47         cmp     r6, r3
  48         blo     .SHARPEND                       @ We have a PXA250 - Corgi
  49
  50         mov     r1, #0x0c000000         @ Base address of NAND chip
  51         ldrb    r3, [r1, #24]   @ Load FLASHCTL
  52         bic     r3, r3, #0x11           @ SET NCE
  53         orr     r3, r3, #0x0a           @ SET CLR + FLWP
  54         strb    r3, [r1, #24]   @ Save to FLASHCTL
  55         mov     r2, #0x90               @ Command "readid"
  56         strb    r2, [r1, #20]   @ Save to FLASHIO
  57         bic     r3, r3, #2                      @ CLR CLE
  58         orr     r3, r3, #4                      @ SET ALE
  59         strb    r3, [r1, #24]   @ Save to FLASHCTL
  60         mov             r2, #0                  @ Address 0x00
  61         strb    r2, [r1, #20]   @ Save to FLASHIO
  62         bic     r3, r3, #4                      @ CLR ALE
  63         strb    r3, [r1, #24]   @ Save to FLASHCTL
  64 .SHARP1:
  65         ldrb    r3, [r1, #24]   @ Load FLASHCTL
  66         tst     r3, #32                         @ Is chip ready?
  67         beq     .SHARP1
  68         ldrb    r2, [r1, #20]   @ NAND Manufacturer ID
  69         ldrb    r3, [r1, #20]   @ NAND Chip ID
  70         ldr     r7, .SHEPHERDID
  71         cmp     r3, #0x76                       @ 64MiB flash
  72         beq     .SHARPEND                       @ We have Shepherd
  73         ldr     r7, .HUSKYID            @ Must be Husky
  74         b .SHARPEND
  75
  76 .PXA255ID:
  77         .word   0x69052d00              @ PXA255 Processor ID
  78 .W100ID:
  79         .word   0x57411002              @ w100 Chip ID
  80 .W100ADDR:
  81         .word   0x08010000              @ w100 Chip ID Reg Address
  82 .POODLEID:
  83         .word   MACH_TYPE_POODLE
  84 .CORGIID:
  85         .word   MACH_TYPE_CORGI
  86 .SHEPHERDID:
  87         .word   MACH_TYPE_SHEPHERD
  88 .HUSKYID:
  89         .word   MACH_TYPE_HUSKY
  90 .SHARPEND:
  91
  92