arch/alpha/kernel/smc37c93x.c

   1 /*
   2  * SMC 37C93X initialization code
   3  */
   4
   5 #include <linux/kernel.h>
   6
   7 #include <linux/mm.h>
   8 #include <linux/init.h>
   9 #include <linux/delay.h>
  10
  11 #include <asm/hwrpb.h>
  12 #include <asm/io.h>
  13 #include <asm/segment.h>
  14
  15 #define SMC_DEBUG 0
  16
  17 #if SMC_DEBUG
  18 # define DBG_DEVS(args)         printk args
  19 #else
  20 # define DBG_DEVS(args)
  21 #endif
  22
  23 #define KB              1024
  24 #define MB              (1024*KB)
  25 #define GB              (1024*MB)
  26
  27 /* device "activate" register contents */
  28 #define DEVICE_ON               1
  29 #define DEVICE_OFF              0
  30
  31 /* configuration on/off keys */
  32 #define CONFIG_ON_KEY           0x55
  33 #define CONFIG_OFF_KEY          0xaa
  34
  35 /* configuration space device definitions */
  36 #define FDC                     0
  37 #define IDE1                    1
  38 #define IDE2                    2
  39 #define PARP                    3
  40 #define SER1                    4
  41 #define SER2                    5
  42 #define RTCL                    6
  43 #define KYBD                    7
  44 #define AUXIO                   8
  45
  46 /* Chip register offsets from base */
  47 #define CONFIG_CONTROL          0x02
  48 #define INDEX_ADDRESS           0x03
  49 #define LOGICAL_DEVICE_NUMBER   0x07
  50 #define DEVICE_ID               0x20
  51 #define DEVICE_REV              0x21
  52 #define POWER_CONTROL           0x22
  53 #define POWER_MGMT              0x23
  54 #define OSC                     0x24
  55
  56 #define ACTIVATE                0x30
  57 #define ADDR_HI                 0x60
  58 #define ADDR_LO                 0x61
  59 #define INTERRUPT_SEL           0x70
  60 #define INTERRUPT_SEL_2         0x72 /* KYBD/MOUS only */
  61 #define DMA_CHANNEL_SEL         0x74 /* FDC/PARP only */
  62
  63 #define FDD_MODE_REGISTER       0x90
  64 #define FDD_OPTION_REGISTER     0x91
  65
  66 /* values that we read back that are expected ... */
  67 #define VALID_DEVICE_ID         2
  68
  69 /* default device addresses */
  70 #define KYBD_INTERRUPT          1
  71 #define MOUS_INTERRUPT          12
  72 #define COM2_BASE               0x2f8
  73 #define COM2_INTERRUPT          3
  74 #define COM1_BASE               0x3f8
  75 #define COM1_INTERRUPT          4
  76 #define PARP_BASE               0x3bc
  77 #define PARP_INTERRUPT          7
  78
  79 static unsigned long __init SMCConfigState(unsigned long baseAddr)
  80 {
  81         unsigned char devId;
  82         unsigned char devRev;
  83
  84         unsigned long configPort;
  85         unsigned long indexPort;
  86         unsigned long dataPort;
  87
  88         int i;
  89
  90         configPort = indexPort = baseAddr;
  91         dataPort = configPort + 1;
  92
  93 #define NUM_RETRIES 5
  94
  95         for (i = 0; i < NUM_RETRIES; i++)
  96         {
  97                 outb(CONFIG_ON_KEY, configPort);
  98                 outb(CONFIG_ON_KEY, configPort);
  99                 outb(DEVICE_ID, indexPort);
 100                 devId = inb(dataPort);
 101                 if (devId == VALID_DEVICE_ID) {
 102                         outb(DEVICE_REV, indexPort);
 103                         devRev = inb(dataPort);
 104                         break;
 105                 }
 106                 else
 107                         udelay(100);
 108         }
 109         return (i != NUM_RETRIES) ? baseAddr : 0L;
 110 }
 111
 112 static void __init SMCRunState(unsigned long baseAddr)
 113 {
 114         outb(CONFIG_OFF_KEY, baseAddr);
 115 }
 116
 117 static unsigned long __init SMCDetectUltraIO(void)
 118 {
 119         unsigned long baseAddr;
 120
 121         baseAddr = 0x3F0;
 122         if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
 123                 return( baseAddr );
 124         }
 125         baseAddr = 0x370;
 126         if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
 127                 return( baseAddr );
 128         }
 129         return( ( unsigned long )0 );
 130 }
 131
 132 static void __init SMCEnableDevice(unsigned long baseAddr,
 133                             unsigned long device,
 134                             unsigned long portaddr,
 135                             unsigned long interrupt)
 136 {
 137         unsigned long indexPort;
 138         unsigned long dataPort;
 139
 140         indexPort = baseAddr;
 141         dataPort = baseAddr + 1;
 142
 143         outb(LOGICAL_DEVICE_NUMBER, indexPort);
 144         outb(device, dataPort);
 145
 146         outb(ADDR_LO, indexPort);
 147         outb(( portaddr & 0xFF ), dataPort);
 148
 149         outb(ADDR_HI, indexPort);
 150         outb((portaddr >> 8) & 0xFF, dataPort);
 151
 152         outb(INTERRUPT_SEL, indexPort);
 153         outb(interrupt, dataPort);
 154
 155         outb(ACTIVATE, indexPort);
 156         outb(DEVICE_ON, dataPort);
 157 }
 158
 159 static void __init SMCEnableKYBD(unsigned long baseAddr)
 160 {
 161         unsigned long indexPort;
 162         unsigned long dataPort;
 163
 164         indexPort = baseAddr;
 165         dataPort = baseAddr + 1;
 166
 167         outb(LOGICAL_DEVICE_NUMBER, indexPort);
 168         outb(KYBD, dataPort);
 169
 170         outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
 171         outb(KYBD_INTERRUPT, dataPort);
 172
 173         outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
 174         outb(MOUS_INTERRUPT, dataPort);
 175
 176         outb(ACTIVATE, indexPort);
 177         outb(DEVICE_ON, dataPort);
 178 }
 179
 180 static void __init SMCEnableFDC(unsigned long baseAddr)
 181 {
 182         unsigned long indexPort;
 183         unsigned long dataPort;
 184
 185         unsigned char oldValue;
 186
 187         indexPort = baseAddr;
 188         dataPort = baseAddr + 1;
 189
 190         outb(LOGICAL_DEVICE_NUMBER, indexPort);
 191         outb(FDC, dataPort);
 192
 193         outb(FDD_MODE_REGISTER, indexPort);
 194         oldValue = inb(dataPort);
 195
 196         oldValue |= 0x0E;                   /* Enable burst mode */
 197         outb(oldValue, dataPort);
 198
 199         outb(INTERRUPT_SEL, indexPort);     /* Primary interrupt select */
 200         outb(0x06, dataPort );
 201
 202         outb(DMA_CHANNEL_SEL, indexPort);   /* DMA channel select */
 203         outb(0x02, dataPort);
 204
 205         outb(ACTIVATE, indexPort);
 206         outb(DEVICE_ON, dataPort);
 207 }
 208
 209 #if SMC_DEBUG
 210 static void __init SMCReportDeviceStatus(unsigned long baseAddr)
 211 {
 212         unsigned long indexPort;
 213         unsigned long dataPort;
 214         unsigned char currentControl;
 215
 216         indexPort = baseAddr;
 217         dataPort = baseAddr + 1;
 218
 219         outb(POWER_CONTROL, indexPort);
 220         currentControl = inb(dataPort);
 221
 222         printk(currentControl & (1 << FDC)
 223                ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
 224         printk(currentControl & (1 << IDE1)
 225                ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
 226         printk(currentControl & (1 << IDE2)
 227                ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
 228         printk(currentControl & (1 << PARP)
 229                ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
 230         printk(currentControl & (1 << SER1)
 231                ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
 232         printk(currentControl & (1 << SER2)
 233                ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
 234
 235         printk( "\n" );
 236 }
 237 #endif
 238
 239 int __init SMC93x_Init(void)
 240 {
 241         unsigned long SMCUltraBase;
 242         unsigned long flags;
 243
 244         local_irq_save(flags);
 245         if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
 246 #if SMC_DEBUG
 247                 SMCReportDeviceStatus(SMCUltraBase);
 248 #endif
 249                 SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
 250                 DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
 251                 SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
 252                 DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
 253                 SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
 254                 DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
 255                 /* On PC164, IDE on the SMC is not enabled;
 256                    CMD646 (PCI) on MB */
 257                 SMCEnableKYBD(SMCUltraBase);
 258                 DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
 259                 SMCEnableFDC(SMCUltraBase);
 260                 DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
 261 #if SMC_DEBUG
 262                 SMCReportDeviceStatus(SMCUltraBase);
 263 #endif
 264                 SMCRunState(SMCUltraBase);
 265                 local_irq_restore(flags);
 266                 printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
 267                        SMCUltraBase);
 268                 return 1;
 269         }
 270         else {
 271                 local_irq_restore(flags);
 272                 DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
 273                 return 0;
 274         }
 275 }