arch/alpha/kernel/semaphore.c

   1 /*
   2  * Alpha semaphore implementation.
   3  *
   4  * (C) Copyright 1996 Linus Torvalds
   5  * (C) Copyright 1999, 2000 Richard Henderson
   6  */
   7
   8 #include <linux/errno.h>
   9 #include <linux/sched.h>
  10 #include <linux/init.h>
  11
  12 /*
  13  * This is basically the PPC semaphore scheme ported to use
  14  * the Alpha ll/sc sequences, so see the PPC code for
  15  * credits.
  16  */
  17
  18 /*
  19  * Atomically update sem->count.
  20  * This does the equivalent of the following:
  21  *
  22  *      old_count = sem->count;
  23  *      tmp = MAX(old_count, 0) + incr;
  24  *      sem->count = tmp;
  25  *      return old_count;
  26  */
  27 static inline int __sem_update_count(struct semaphore *sem, int incr)
  28 {
  29         long old_count, tmp = 0;
  30
  31         __asm__ __volatile__(
  32         "1:     ldl_l   %0,%2\n"
  33         "       cmovgt  %0,%0,%1\n"
  34         "       addl    %1,%3,%1\n"
  35         "       stl_c   %1,%2\n"
  36         "       beq     %1,2f\n"
  37         "       mb\n"
  38         ".subsection 2\n"
  39         "2:     br      1b\n"
  40         ".previous"
  41         : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
  42         : "Ir" (incr), "1" (tmp), "m" (sem->count));
  43
  44         return old_count;
  45 }
  46
  47 /*
  48  * Perform the "down" function.  Return zero for semaphore acquired,
  49  * return negative for signalled out of the function.
  50  *
  51  * If called from down, the return is ignored and the wait loop is
  52  * not interruptible.  This means that a task waiting on a semaphore
  53  * using "down()" cannot be killed until someone does an "up()" on
  54  * the semaphore.
  55  *
  56  * If called from down_interruptible, the return value gets checked
  57  * upon return.  If the return value is negative then the task continues
  58  * with the negative value in the return register (it can be tested by
  59  * the caller).
  60  *
  61  * Either form may be used in conjunction with "up()".
  62  */
  63
  64 void __sched
  65 __down_failed(struct semaphore *sem)
  66 {
  67         struct task_struct *tsk = current;
  68         DECLARE_WAITQUEUE(wait, tsk);
  69
  70 #ifdef CONFIG_DEBUG_SEMAPHORE
  71         printk("%s(%d): down failed(%p)\n",
  72                tsk->comm, task_pid_nr(tsk), sem);
  73 #endif
  74
  75         tsk->state = TASK_UNINTERRUPTIBLE;
  76         wmb();
  77         add_wait_queue_exclusive(&sem->wait, &wait);
  78
  79         /*
  80          * Try to get the semaphore.  If the count is > 0, then we've
  81          * got the semaphore; we decrement count and exit the loop.
  82          * If the count is 0 or negative, we set it to -1, indicating
  83          * that we are asleep, and then sleep.
  84          */
  85         while (__sem_update_count(sem, -1) <= 0) {
  86                 schedule();
  87                 set_task_state(tsk, TASK_UNINTERRUPTIBLE);
  88         }
  89         remove_wait_queue(&sem->wait, &wait);
  90         tsk->state = TASK_RUNNING;
  91
  92         /*
  93          * If there are any more sleepers, wake one of them up so
  94          * that it can either get the semaphore, or set count to -1
  95          * indicating that there are still processes sleeping.
  96          */
  97         wake_up(&sem->wait);
  98
  99 #ifdef CONFIG_DEBUG_SEMAPHORE
 100         printk("%s(%d): down acquired(%p)\n",
 101                tsk->comm, task_pid_nr(tsk), sem);
 102 #endif
 103 }
 104
 105 int __sched
 106 __down_failed_interruptible(struct semaphore *sem)
 107 {
 108         struct task_struct *tsk = current;
 109         DECLARE_WAITQUEUE(wait, tsk);
 110         long ret = 0;
 111
 112 #ifdef CONFIG_DEBUG_SEMAPHORE
 113         printk("%s(%d): down failed(%p)\n",
 114                tsk->comm, task_pid_nr(tsk), sem);
 115 #endif
 116
 117         tsk->state = TASK_INTERRUPTIBLE;
 118         wmb();
 119         add_wait_queue_exclusive(&sem->wait, &wait);
 120
 121         while (__sem_update_count(sem, -1) <= 0) {
 122                 if (signal_pending(current)) {
 123                         /*
 124                          * A signal is pending - give up trying.
 125                          * Set sem->count to 0 if it is negative,
 126                          * since we are no longer sleeping.
 127                          */
 128                         __sem_update_count(sem, 0);
 129                         ret = -EINTR;
 130                         break;
 131                 }
 132                 schedule();
 133                 set_task_state(tsk, TASK_INTERRUPTIBLE);
 134         }
 135
 136         remove_wait_queue(&sem->wait, &wait);
 137         tsk->state = TASK_RUNNING;
 138         wake_up(&sem->wait);
 139
 140 #ifdef CONFIG_DEBUG_SEMAPHORE
 141         printk("%s(%d): down %s(%p)\n",
 142                current->comm, task_pid_nr(current),
 143                (ret < 0 ? "interrupted" : "acquired"), sem);
 144 #endif
 145         return ret;
 146 }
 147
 148 void
 149 __up_wakeup(struct semaphore *sem)
 150 {
 151         /*
 152          * Note that we incremented count in up() before we came here,
 153          * but that was ineffective since the result was <= 0, and
 154          * any negative value of count is equivalent to 0.
 155          * This ends up setting count to 1, unless count is now > 0
 156          * (i.e. because some other cpu has called up() in the meantime),
 157          * in which case we just increment count.
 158          */
 159         __sem_update_count(sem, 1);
 160         wake_up(&sem->wait);
 161 }
 162
 163 void __sched
 164 down(struct semaphore *sem)
 165 {
 166 #ifdef WAITQUEUE_DEBUG
 167         CHECK_MAGIC(sem->__magic);
 168 #endif
 169 #ifdef CONFIG_DEBUG_SEMAPHORE
 170         printk("%s(%d): down(%p) <count=%d> from %p\n",
 171                current->comm, task_pid_nr(current), sem,
 172                atomic_read(&sem->count), __builtin_return_address(0));
 173 #endif
 174         __down(sem);
 175 }
 176
 177 int __sched
 178 down_interruptible(struct semaphore *sem)
 179 {
 180 #ifdef WAITQUEUE_DEBUG
 181         CHECK_MAGIC(sem->__magic);
 182 #endif
 183 #ifdef CONFIG_DEBUG_SEMAPHORE
 184         printk("%s(%d): down(%p) <count=%d> from %p\n",
 185                current->comm, task_pid_nr(current), sem,
 186                atomic_read(&sem->count), __builtin_return_address(0));
 187 #endif
 188         return __down_interruptible(sem);
 189 }
 190
 191 int
 192 down_trylock(struct semaphore *sem)
 193 {
 194         int ret;
 195
 196 #ifdef WAITQUEUE_DEBUG
 197         CHECK_MAGIC(sem->__magic);
 198 #endif
 199
 200         ret = __down_trylock(sem);
 201
 202 #ifdef CONFIG_DEBUG_SEMAPHORE
 203         printk("%s(%d): down_trylock %s from %p\n",
 204                current->comm, task_pid_nr(current),
 205                ret ? "failed" : "acquired",
 206                __builtin_return_address(0));
 207 #endif
 208
 209         return ret;
 210 }
 211
 212 void
 213 up(struct semaphore *sem)
 214 {
 215 #ifdef WAITQUEUE_DEBUG
 216         CHECK_MAGIC(sem->__magic);
 217 #endif
 218 #ifdef CONFIG_DEBUG_SEMAPHORE
 219         printk("%s(%d): up(%p) <count=%d> from %p\n",
 220                current->comm, task_pid_nr(current), sem,
 221                atomic_read(&sem->count), __builtin_return_address(0));
 222 #endif
 223         __up(sem);
 224 }