[PATCH] message types updated

[pandora-kernel.git] / Documentation / RCU / whatisRCU.txt

What is RCU?

RCU is a synchronization mechanism that was added to the Linux kernel
during the 2.5 development effort that is optimized for read-mostly
situations.  Although RCU is actually quite simple once you understand it,
getting there can sometimes be a challenge.  Part of the problem is that
most of the past descriptions of RCU have been written with the mistaken
assumption that there is "one true way" to describe RCU.  Instead,
the experience has been that different people must take different paths
to arrive at an understanding of RCU.  This document provides several
different paths, as follows:

1.      RCU OVERVIEW
2.      WHAT IS RCU'S CORE API?
3.      WHAT ARE SOME EXAMPLE USES OF CORE RCU API?
4.      WHAT IF MY UPDATING THREAD CANNOT BLOCK?
5.      WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU?
6.      ANALOGY WITH READER-WRITER LOCKING
7.      FULL LIST OF RCU APIs
8.      ANSWERS TO QUICK QUIZZES

People who prefer starting with a conceptual overview should focus on
Section 1, though most readers will profit by reading this section at
some point.  People who prefer to start with an API that they can then
experiment with should focus on Section 2.  People who prefer to start
with example uses should focus on Sections 3 and 4.  People who need to
understand the RCU implementation should focus on Section 5, then dive
into the kernel source code.  People who reason best by analogy should
focus on Section 6.  Section 7 serves as an index to the docbook API
documentation, and Section 8 is the traditional answer key.

So, start with the section that makes the most sense to you and your
preferred method of learning.  If you need to know everything about
everything, feel free to read the whole thing -- but if you are really
that type of person, you have perused the source code and will therefore
never need this document anyway.  ;-)


1.  RCU OVERVIEW

The basic idea behind RCU is to split updates into "removal" and
"reclamation" phases.  The removal phase removes references to data items
within a data structure (possibly by replacing them with references to
new versions of these data items), and can run concurrently with readers.
The reason that it is safe to run the removal phase concurrently with
readers is the semantics of modern CPUs guarantee that readers will see
either the old or the new version of the data structure rather than a
partially updated reference.  The reclamation phase does the work of reclaiming
(e.g., freeing) the data items removed from the data structure during the
removal phase.  Because reclaiming data items can disrupt any readers
concurrently referencing those data items, the reclamation phase must
not start until readers no longer hold references to those data items.

Splitting the update into removal and reclamation phases permits the
updater to perform the removal phase immediately, and to defer the
reclamation phase until all readers active during the removal phase have
completed, either by blocking until they finish or by registering a
callback that is invoked after they finish.  Only readers that are active
during the removal phase need be considered, because any reader starting
after the removal phase will be unable to gain a reference to the removed
data items, and therefore cannot be disrupted by the reclamation phase.

So the typical RCU update sequence goes something like the following:

a.      Remove pointers to a data structure, so that subsequent
        readers cannot gain a reference to it.

b.      Wait for all previous readers to complete their RCU read-side
        critical sections.

c.      At this point, there cannot be any readers who hold references
        to the data structure, so it now may safely be reclaimed
        (e.g., kfree()d).

Step (b) above is the key idea underlying RCU's deferred destruction.
The ability to wait until all readers are done allows RCU readers to
use much lighter-weight synchronization, in some cases, absolutely no
synchronization at all.  In contrast, in more conventional lock-based
schemes, readers must use heavy-weight synchronization in order to
prevent an updater from deleting the data structure out from under them.
This is because lock-based updaters typically update data items in place,
and must therefore exclude readers.  In contrast, RCU-based updaters
typically take advantage of the fact that writes to single aligned
pointers are atomic on modern CPUs, allowing atomic insertion, removal,
and replacement of data items in a linked structure without disrupting
readers.  Concurrent RCU readers can then continue accessing the old
versions, and can dispense with the atomic operations, memory barriers,
and communications cache misses that are so expensive on present-day
SMP computer systems, even in absence of lock contention.

In the three-step procedure shown above, the updater is performing both
the removal and the reclamation step, but it is often helpful for an
entirely different thread to do the reclamation, as is in fact the case
in the Linux kernel's directory-entry cache (dcache).  Even if the same
thread performs both the update step (step (a) above) and the reclamation
step (step (c) above), it is often helpful to think of them separately.
For example, RCU readers and updaters need not communicate at all,
but RCU provides implicit low-overhead communication between readers
and reclaimers, namely, in step (b) above.

So how the heck can a reclaimer tell when a reader is done, given
that readers are not doing any sort of synchronization operations???
Read on to learn about how RCU's API makes this easy.


2.  WHAT IS RCU'S CORE API?

The core RCU API is quite small:

a.      rcu_read_lock()
b.      rcu_read_unlock()
c.      synchronize_rcu() / call_rcu()
d.      rcu_assign_pointer()
e.      rcu_dereference()

There are many other members of the RCU API, but the rest can be
expressed in terms of these five, though most implementations instead
express synchronize_rcu() in terms of the call_rcu() callback API.

The five core RCU APIs are described below, the other 18 will be enumerated
later.  See the kernel docbook documentation for more info, or look directly
at the function header comments.

rcu_read_lock()

        void rcu_read_lock(void);

        Used by a reader to inform the reclaimer that the reader is
        entering an RCU read-side critical section.  It is illegal
        to block while in an RCU read-side critical section, though
        kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side
        critical sections.  Any RCU-protected data structure accessed
        during an RCU read-side critical section is guaranteed to remain
        unreclaimed for the full duration of that critical section.
        Reference counts may be used in conjunction with RCU to maintain
        longer-term references to data structures.

rcu_read_unlock()

        void rcu_read_unlock(void);

        Used by a reader to inform the reclaimer that the reader is
        exiting an RCU read-side critical section.  Note that RCU
        read-side critical sections may be nested and/or overlapping.

synchronize_rcu()

        void synchronize_rcu(void);

        Marks the end of updater code and the beginning of reclaimer
        code.  It does this by blocking until all pre-existing RCU
        read-side critical sections on all CPUs have completed.
        Note that synchronize_rcu() will -not- necessarily wait for
        any subsequent RCU read-side critical sections to complete.
        For example, consider the following sequence of events:

                 CPU 0                  CPU 1                 CPU 2
             ----------------- ------------------------- ---------------
         1.  rcu_read_lock()
         2.                    enters synchronize_rcu()
         3.                                               rcu_read_lock()
         4.  rcu_read_unlock()
         5.                     exits synchronize_rcu()
         6.                                              rcu_read_unlock()

        To reiterate, synchronize_rcu() waits only for ongoing RCU
        read-side critical sections to complete, not necessarily for
        any that begin after synchronize_rcu() is invoked.

        Of course, synchronize_rcu() does not necessarily return
        -immediately- after the last pre-existing RCU read-side critical
        section completes.  For one thing, there might well be scheduling
        delays.  For another thing, many RCU implementations process
        requests in batches in order to improve efficiencies, which can
        further delay synchronize_rcu().

        Since synchronize_rcu() is the API that must figure out when
        readers are done, its implementation is key to RCU.  For RCU
        to be useful in all but the most read-intensive situations,
        synchronize_rcu()'s overhead must also be quite small.

        The call_rcu() API is a callback form of synchronize_rcu(),
        and is described in more detail in a later section.  Instead of
        blocking, it registers a function and argument which are invoked
        after all ongoing RCU read-side critical sections have completed.
        This callback variant is particularly useful in situations where
        it is illegal to block or where update-side performance is
        critically important.

        However, the call_rcu() API should not be used lightly, as use
        of the synchronize_rcu() API generally results in simpler code.
        In addition, the synchronize_rcu() API has the nice property
        of automatically limiting update rate should grace periods
        be delayed.  This property results in system resilience in face
        of denial-of-service attacks.  Code using call_rcu() should limit
        update rate in order to gain this same sort of resilience.  See
        checklist.txt for some approaches to limiting the update rate.

rcu_assign_pointer()

        typeof(p) rcu_assign_pointer(p, typeof(p) v);

        Yes, rcu_assign_pointer() -is- implemented as a macro, though it
        would be cool to be able to declare a function in this manner.
        (Compiler experts will no doubt disagree.)

        The updater uses this function to assign a new value to an
        RCU-protected pointer, in order to safely communicate the change
        in value from the updater to the reader.  This function returns
        the new value, and also executes any memory-barrier instructions
        required for a given CPU architecture.

        Perhaps just as important, it serves to document (1) which
        pointers are protected by RCU and (2) the point at which a
        given structure becomes accessible to other CPUs.  That said,
        rcu_assign_pointer() is most frequently used indirectly, via
        the _rcu list-manipulation primitives such as list_add_rcu().

rcu_dereference()

        typeof(p) rcu_dereference(p);

        Like rcu_assign_pointer(), rcu_dereference() must be implemented
        as a macro.

        The reader uses rcu_dereference() to fetch an RCU-protected
        pointer, which returns a value that may then be safely
        dereferenced.  Note that rcu_deference() does not actually
        dereference the pointer, instead, it protects the pointer for
        later dereferencing.  It also executes any needed memory-barrier
        instructions for a given CPU architecture.  Currently, only Alpha
        needs memory barriers within rcu_dereference() -- on other CPUs,
        it compiles to nothing, not even a compiler directive.

        Common coding practice uses rcu_dereference() to copy an
        RCU-protected pointer to a local variable, then dereferences
        this local variable, for example as follows:

                p = rcu_dereference(head.next);
                return p->data;

        However, in this case, one could just as easily combine these
        into one statement:

                return rcu_dereference(head.next)->data;

        If you are going to be fetching multiple fields from the
        RCU-protected structure, using the local variable is of
        course preferred.  Repeated rcu_dereference() calls look
        ugly and incur unnecessary overhead on Alpha CPUs.

        Note that the value returned by rcu_dereference() is valid
        only within the enclosing RCU read-side critical section.
        For example, the following is -not- legal:

                rcu_read_lock();
                p = rcu_dereference(head.next);
                rcu_read_unlock();
                x = p->address;
                rcu_read_lock();
                y = p->data;
                rcu_read_unlock();

        Holding a reference from one RCU read-side critical section
        to another is just as illegal as holding a reference from
        one lock-based critical section to another!  Similarly,
        using a reference outside of the critical section in which
        it was acquired is just as illegal as doing so with normal
        locking.

        As with rcu_assign_pointer(), an important function of
        rcu_dereference() is to document which pointers are protected by
        RCU, in particular, flagging a pointer that is subject to changing
        at any time, including immediately after the rcu_dereference().
        And, again like rcu_assign_pointer(), rcu_dereference() is
        typically used indirectly, via the _rcu list-manipulation
        primitives, such as list_for_each_entry_rcu().

The following diagram shows how each API communicates among the
reader, updater, and reclaimer.


            rcu_assign_pointer()
                                    +--------+
            +---------------------->| reader |---------+
            |                       +--------+         |
            |                           |              |
            |                           |              | Protect:
            |                           |              | rcu_read_lock()
            |                           |              | rcu_read_unlock()
            |        rcu_dereference()  |              |
       +---------+                      |              |
       | updater |<---------------------+              |
       +---------+                                     V
            |                                    +-----------+
            +----------------------------------->| reclaimer |
                                                 +-----------+
              Defer:
              synchronize_rcu() & call_rcu()


The RCU infrastructure observes the time sequence of rcu_read_lock(),
rcu_read_unlock(), synchronize_rcu(), and call_rcu() invocations in
order to determine when (1) synchronize_rcu() invocations may return
to their callers and (2) call_rcu() callbacks may be invoked.  Efficient
implementations of the RCU infrastructure make heavy use of batching in
order to amortize their overhead over many uses of the corresponding APIs.

There are no fewer than three RCU mechanisms in the Linux kernel; the
diagram above shows the first one, which is by far the most commonly used.
The rcu_dereference() and rcu_assign_pointer() primitives are used for
all three mechanisms, but different defer and protect primitives are
used as follows:

        Defer                   Protect

a.      synchronize_rcu()       rcu_read_lock() / rcu_read_unlock()
        call_rcu()

b.      call_rcu_bh()           rcu_read_lock_bh() / rcu_read_unlock_bh()

c.      synchronize_sched()     preempt_disable() / preempt_enable()
                                local_irq_save() / local_irq_restore()
                                hardirq enter / hardirq exit
                                NMI enter / NMI exit

These three mechanisms are used as follows:

a.      RCU applied to normal data structures.

b.      RCU applied to networking data structures that may be subjected
        to remote denial-of-service attacks.

c.      RCU applied to scheduler and interrupt/NMI-handler tasks.

Again, most uses will be of (a).  The (b) and (c) cases are important
for specialized uses, but are relatively uncommon.


3.  WHAT ARE SOME EXAMPLE USES OF CORE RCU API?

This section shows a simple use of the core RCU API to protect a
global pointer to a dynamically allocated structure.  More-typical
uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt.

        struct foo {
                int a;
                char b;
                long c;
        };
        DEFINE_SPINLOCK(foo_mutex);

        struct foo *gbl_foo;

        /*
         * Create a new struct foo that is the same as the one currently
         * pointed to by gbl_foo, except that field "a" is replaced
         * with "new_a".  Points gbl_foo to the new structure, and
         * frees up the old structure after a grace period.
         *
         * Uses rcu_assign_pointer() to ensure that concurrent readers
         * see the initialized version of the new structure.
         *
         * Uses synchronize_rcu() to ensure that any readers that might
         * have references to the old structure complete before freeing
         * the old structure.
         */
        void foo_update_a(int new_a)
        {
                struct foo *new_fp;
                struct foo *old_fp;

                new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
                spin_lock(&foo_mutex);
                old_fp = gbl_foo;
                *new_fp = *old_fp;
                new_fp->a = new_a;
                rcu_assign_pointer(gbl_foo, new_fp);
                spin_unlock(&foo_mutex);
                synchronize_rcu();
                kfree(old_fp);
        }

        /*
         * Return the value of field "a" of the current gbl_foo
         * structure.  Use rcu_read_lock() and rcu_read_unlock()
         * to ensure that the structure does not get deleted out
         * from under us, and use rcu_dereference() to ensure that
         * we see the initialized version of the structure (important
         * for DEC Alpha and for people reading the code).
         */
        int foo_get_a(void)
        {
                int retval;

                rcu_read_lock();
                retval = rcu_dereference(gbl_foo)->a;
                rcu_read_unlock();
                return retval;
        }

So, to sum up:

o       Use rcu_read_lock() and rcu_read_unlock() to guard RCU
        read-side critical sections.

o       Within an RCU read-side critical section, use rcu_dereference()
        to dereference RCU-protected pointers.

o       Use some solid scheme (such as locks or semaphores) to
        keep concurrent updates from interfering with each other.

o       Use rcu_assign_pointer() to update an RCU-protected pointer.
        This primitive protects concurrent readers from the updater,
        -not- concurrent updates from each other!  You therefore still
        need to use locking (or something similar) to keep concurrent
        rcu_assign_pointer() primitives from interfering with each other.

o       Use synchronize_rcu() -after- removing a data element from an
        RCU-protected data structure, but -before- reclaiming/freeing
        the data element, in order to wait for the completion of all
        RCU read-side critical sections that might be referencing that
        data item.

See checklist.txt for additional rules to follow when using RCU.
And again, more-typical uses of RCU may be found in listRCU.txt,
arrayRCU.txt, and NMI-RCU.txt.


4.  WHAT IF MY UPDATING THREAD CANNOT BLOCK?

In the example above, foo_update_a() blocks until a grace period elapses.
This is quite simple, but in some cases one cannot afford to wait so
long -- there might be other high-priority work to be done.

In such cases, one uses call_rcu() rather than synchronize_rcu().
The call_rcu() API is as follows:

        void call_rcu(struct rcu_head * head,
                      void (*func)(struct rcu_head *head));

This function invokes func(head) after a grace period has elapsed.
This invocation might happen from either softirq or process context,
so the function is not permitted to block.  The foo struct needs to
have an rcu_head structure added, perhaps as follows:

        struct foo {
                int a;
                char b;
                long c;
                struct rcu_head rcu;
        };

The foo_update_a() function might then be written as follows:

        /*
         * Create a new struct foo that is the same as the one currently
         * pointed to by gbl_foo, except that field "a" is replaced
         * with "new_a".  Points gbl_foo to the new structure, and
         * frees up the old structure after a grace period.
         *
         * Uses rcu_assign_pointer() to ensure that concurrent readers
         * see the initialized version of the new structure.
         *
         * Uses call_rcu() to ensure that any readers that might have
         * references to the old structure complete before freeing the
         * old structure.
         */
        void foo_update_a(int new_a)
        {
                struct foo *new_fp;
                struct foo *old_fp;

                new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
                spin_lock(&foo_mutex);
                old_fp = gbl_foo;
                *new_fp = *old_fp;
                new_fp->a = new_a;
                rcu_assign_pointer(gbl_foo, new_fp);
                spin_unlock(&foo_mutex);
                call_rcu(&old_fp->rcu, foo_reclaim);
        }

The foo_reclaim() function might appear as follows:

        void foo_reclaim(struct rcu_head *rp)
        {
                struct foo *fp = container_of(rp, struct foo, rcu);

                kfree(fp);
        }

The container_of() primitive is a macro that, given a pointer into a
struct, the type of the struct, and the pointed-to field within the
struct, returns a pointer to the beginning of the struct.

The use of call_rcu() permits the caller of foo_update_a() to
immediately regain control, without needing to worry further about the
old version of the newly updated element.  It also clearly shows the
RCU distinction between updater, namely foo_update_a(), and reclaimer,
namely foo_reclaim().

The summary of advice is the same as for the previous section, except
that we are now using call_rcu() rather than synchronize_rcu():

o       Use call_rcu() -after- removing a data element from an
        RCU-protected data structure in order to register a callback
        function that will be invoked after the completion of all RCU
        read-side critical sections that might be referencing that
        data item.

Again, see checklist.txt for additional rules governing the use of RCU.


5.  WHAT ARE SOME SIMPLE IMPLEMENTATIONS OF RCU?

One of the nice things about RCU is that it has extremely simple "toy"
implementations that are a good first step towards understanding the
production-quality implementations in the Linux kernel.  This section
presents two such "toy" implementations of RCU, one that is implemented
in terms of familiar locking primitives, and another that more closely
resembles "classic" RCU.  Both are way too simple for real-world use,
lacking both functionality and performance.  However, they are useful
in getting a feel for how RCU works.  See kernel/rcupdate.c for a
production-quality implementation, and see:

        http://www.rdrop.com/users/paulmck/RCU

for papers describing the Linux kernel RCU implementation.  The OLS'01
and OLS'02 papers are a good introduction, and the dissertation provides
more details on the current implementation as of early 2004.


5A.  "TOY" IMPLEMENTATION #1: LOCKING

This section presents a "toy" RCU implementation that is based on
familiar locking primitives.  Its overhead makes it a non-starter for
real-life use, as does its lack of scalability.  It is also unsuitable
for realtime use, since it allows scheduling latency to "bleed" from
one read-side critical section to another.

However, it is probably the easiest implementation to relate to, so is
a good starting point.

It is extremely simple:

        static DEFINE_RWLOCK(rcu_gp_mutex);

        void rcu_read_lock(void)
        {
                read_lock(&rcu_gp_mutex);
        }

        void rcu_read_unlock(void)
        {
                read_unlock(&rcu_gp_mutex);
        }

        void synchronize_rcu(void)
        {
                write_lock(&rcu_gp_mutex);
                write_unlock(&rcu_gp_mutex);
        }

[You can ignore rcu_assign_pointer() and rcu_dereference() without
missing much.  But here they are anyway.  And whatever you do, don't
forget about them when submitting patches making use of RCU!]

        #define rcu_assign_pointer(p, v)        ({ \
                                                        smp_wmb(); \
                                                        (p) = (v); \
                                                })

        #define rcu_dereference(p)     ({ \
                                        typeof(p) _________p1 = p; \
                                        smp_read_barrier_depends(); \
                                        (_________p1); \
                                        })


The rcu_read_lock() and rcu_read_unlock() primitive read-acquire
and release a global reader-writer lock.  The synchronize_rcu()
primitive write-acquires this same lock, then immediately releases
it.  This means that once synchronize_rcu() exits, all RCU read-side
critical sections that were in progress before synchronize_rcu() was
called are guaranteed to have completed -- there is no way that
synchronize_rcu() would have been able to write-acquire the lock
otherwise.

It is possible to nest rcu_read_lock(), since reader-writer locks may
be recursively acquired.  Note also that rcu_read_lock() is immune
from deadlock (an important property of RCU).  The reason for this is
that the only thing that can block rcu_read_lock() is a synchronize_rcu().
But synchronize_rcu() does not acquire any locks while holding rcu_gp_mutex,
so there can be no deadlock cycle.

Quick Quiz #1:  Why is this argument naive?  How could a deadlock
                occur when using this algorithm in a real-world Linux
                kernel?  How could this deadlock be avoided?


5B.  "TOY" EXAMPLE #2: CLASSIC RCU

This section presents a "toy" RCU implementation that is based on
"classic RCU".  It is also short on performance (but only for updates) and
on features such as hotplug CPU and the ability to run in CONFIG_PREEMPT
kernels.  The definitions of rcu_dereference() and rcu_assign_pointer()
are the same as those shown in the preceding section, so they are omitted.

        void rcu_read_lock(void) { }

        void rcu_read_unlock(void) { }

        void synchronize_rcu(void)
        {
                int cpu;

                for_each_possible_cpu(cpu)
                        run_on(cpu);
        }

Note that rcu_read_lock() and rcu_read_unlock() do absolutely nothing.
This is the great strength of classic RCU in a non-preemptive kernel:
read-side overhead is precisely zero, at least on non-Alpha CPUs.
And there is absolutely no way that rcu_read_lock() can possibly
participate in a deadlock cycle!

The implementation of synchronize_rcu() simply schedules itself on each
CPU in turn.  The run_on() primitive can be implemented straightforwardly
in terms of the sched_setaffinity() primitive.  Of course, a somewhat less
"toy" implementation would restore the affinity upon completion rather
than just leaving all tasks running on the last CPU, but when I said
"toy", I meant -toy-!

So how the heck is this supposed to work???

Remember that it is illegal to block while in an RCU read-side critical
section.  Therefore, if a given CPU executes a context switch, we know
that it must have completed all preceding RCU read-side critical sections.
Once -all- CPUs have executed a context switch, then -all- preceding
RCU read-side critical sections will have completed.

So, suppose that we remove a data item from its structure and then invoke
synchronize_rcu().  Once synchronize_rcu() returns, we are guaranteed
that there are no RCU read-side critical sections holding a reference
to that data item, so we can safely reclaim it.

Quick Quiz #2:  Give an example where Classic RCU's read-side
                overhead is -negative-.

Quick Quiz #3:  If it is illegal to block in an RCU read-side
                critical section, what the heck do you do in
                PREEMPT_RT, where normal spinlocks can block???


6.  ANALOGY WITH READER-WRITER LOCKING

Although RCU can be used in many different ways, a very common use of
RCU is analogous to reader-writer locking.  The following unified
diff shows how closely related RCU and reader-writer locking can be.

        @@ -13,15 +14,15 @@
                struct list_head *lp;
                struct el *p;

        -       read_lock();
        -       list_for_each_entry(p, head, lp) {
        +       rcu_read_lock();
        +       list_for_each_entry_rcu(p, head, lp) {
                        if (p->key == key) {
                                *result = p->data;
        -                       read_unlock();
        +                       rcu_read_unlock();
                                return 1;
                        }
                }
        -       read_unlock();
        +       rcu_read_unlock();
                return 0;
         }

        @@ -29,15 +30,16 @@
         {
                struct el *p;

        -       write_lock(&listmutex);
        +       spin_lock(&listmutex);
                list_for_each_entry(p, head, lp) {
                        if (p->key == key) {
        -                       list_del(&p->list);
        -                       write_unlock(&listmutex);
        +                       list_del_rcu(&p->list);
        +                       spin_unlock(&listmutex);
        +                       synchronize_rcu();
                                kfree(p);
                                return 1;
                        }
                }
        -       write_unlock(&listmutex);
        +       spin_unlock(&listmutex);
                return 0;
         }

Or, for those who prefer a side-by-side listing:

 1 struct el {                          1 struct el {
 2   struct list_head list;             2   struct list_head list;
 3   long key;                          3   long key;
 4   spinlock_t mutex;                  4   spinlock_t mutex;
 5   int data;                          5   int data;
 6   /* Other data fields */            6   /* Other data fields */
 7 };                                   7 };
 8 spinlock_t listmutex;                8 spinlock_t listmutex;
 9 struct el head;                      9 struct el head;

 1 int search(long key, int *result)    1 int search(long key, int *result)
 2 {                                    2 {
 3   struct list_head *lp;              3   struct list_head *lp;
 4   struct el *p;                      4   struct el *p;
 5                                      5
 6   read_lock();                       6   rcu_read_lock();
 7   list_for_each_entry(p, head, lp) { 7   list_for_each_entry_rcu(p, head, lp) {
 8     if (p->key == key) {             8     if (p->key == key) {
 9       *result = p->data;             9       *result = p->data;
10       read_unlock();                10       rcu_read_unlock();
11       return 1;                     11       return 1;
12     }                               12     }
13   }                                 13   }
14   read_unlock();                    14   rcu_read_unlock();
15   return 0;                         15   return 0;
16 }                                   16 }

 1 int delete(long key)                 1 int delete(long key)
 2 {                                    2 {
 3   struct el *p;                      3   struct el *p;
 4                                      4
 5   write_lock(&listmutex);            5   spin_lock(&listmutex);
 6   list_for_each_entry(p, head, lp) { 6   list_for_each_entry(p, head, lp) {
 7     if (p->key == key) {             7     if (p->key == key) {
 8       list_del(&p->list);            8       list_del_rcu(&p->list);
 9       write_unlock(&listmutex);      9       spin_unlock(&listmutex);
                                       10       synchronize_rcu();
10       kfree(p);                     11       kfree(p);
11       return 1;                     12       return 1;
12     }                               13     }
13   }                                 14   }
14   write_unlock(&listmutex);         15   spin_unlock(&listmutex);
15   return 0;                         16   return 0;
16 }                                   17 }

Either way, the differences are quite small.  Read-side locking moves
to rcu_read_lock() and rcu_read_unlock, update-side locking moves from
a reader-writer lock to a simple spinlock, and a synchronize_rcu()
precedes the kfree().

However, there is one potential catch: the read-side and update-side
critical sections can now run concurrently.  In many cases, this will
not be a problem, but it is necessary to check carefully regardless.
For example, if multiple independent list updates must be seen as
a single atomic update, converting to RCU will require special care.

Also, the presence of synchronize_rcu() means that the RCU version of
delete() can now block.  If this is a problem, there is a callback-based
mechanism that never blocks, namely call_rcu(), that can be used in
place of synchronize_rcu().


7.  FULL LIST OF RCU APIs

The RCU APIs are documented in docbook-format header comments in the
Linux-kernel source code, but it helps to have a full list of the
APIs, since there does not appear to be a way to categorize them
in docbook.  Here is the list, by category.

Markers for RCU read-side critical sections:

        rcu_read_lock
        rcu_read_unlock
        rcu_read_lock_bh
        rcu_read_unlock_bh

RCU pointer/list traversal:

        rcu_dereference
        list_for_each_rcu               (to be deprecated in favor of
                                         list_for_each_entry_rcu)
        list_for_each_entry_rcu
        list_for_each_continue_rcu      (to be deprecated in favor of new
                                         list_for_each_entry_continue_rcu)
        hlist_for_each_entry_rcu

RCU pointer update:

        rcu_assign_pointer
        list_add_rcu
        list_add_tail_rcu
        list_del_rcu
        list_replace_rcu
        hlist_del_rcu
        hlist_add_head_rcu

RCU grace period:

        synchronize_net
        synchronize_sched
        synchronize_rcu
        call_rcu
        call_rcu_bh

See the comment headers in the source code (or the docbook generated
from them) for more information.


8.  ANSWERS TO QUICK QUIZZES

Quick Quiz #1:  Why is this argument naive?  How could a deadlock
                occur when using this algorithm in a real-world Linux
                kernel?  [Referring to the lock-based "toy" RCU
                algorithm.]

Answer:         Consider the following sequence of events:

                1.      CPU 0 acquires some unrelated lock, call it
                        "problematic_lock", disabling irq via
                        spin_lock_irqsave().

                2.      CPU 1 enters synchronize_rcu(), write-acquiring
                        rcu_gp_mutex.

                3.      CPU 0 enters rcu_read_lock(), but must wait
                        because CPU 1 holds rcu_gp_mutex.

                4.      CPU 1 is interrupted, and the irq handler
                        attempts to acquire problematic_lock.

                The system is now deadlocked.

                One way to avoid this deadlock is to use an approach like
                that of CONFIG_PREEMPT_RT, where all normal spinlocks
                become blocking locks, and all irq handlers execute in
                the context of special tasks.  In this case, in step 4
                above, the irq handler would block, allowing CPU 1 to
                release rcu_gp_mutex, avoiding the deadlock.

                Even in the absence of deadlock, this RCU implementation
                allows latency to "bleed" from readers to other
                readers through synchronize_rcu().  To see this,
                consider task A in an RCU read-side critical section
                (thus read-holding rcu_gp_mutex), task B blocked
                attempting to write-acquire rcu_gp_mutex, and
                task C blocked in rcu_read_lock() attempting to
                read_acquire rcu_gp_mutex.  Task A's RCU read-side
                latency is holding up task C, albeit indirectly via
                task B.

                Realtime RCU implementations therefore use a counter-based
                approach where tasks in RCU read-side critical sections
                cannot be blocked by tasks executing synchronize_rcu().

Quick Quiz #2:  Give an example where Classic RCU's read-side
                overhead is -negative-.

Answer:         Imagine a single-CPU system with a non-CONFIG_PREEMPT
                kernel where a routing table is used by process-context
                code, but can be updated by irq-context code (for example,
                by an "ICMP REDIRECT" packet).  The usual way of handling
                this would be to have the process-context code disable
                interrupts while searching the routing table.  Use of
                RCU allows such interrupt-disabling to be dispensed with.
                Thus, without RCU, you pay the cost of disabling interrupts,
                and with RCU you don't.

                One can argue that the overhead of RCU in this
                case is negative with respect to the single-CPU
                interrupt-disabling approach.  Others might argue that
                the overhead of RCU is merely zero, and that replacing
                the positive overhead of the interrupt-disabling scheme
                with the zero-overhead RCU scheme does not constitute
                negative overhead.

                In real life, of course, things are more complex.  But
                even the theoretical possibility of negative overhead for
                a synchronization primitive is a bit unexpected.  ;-)

Quick Quiz #3:  If it is illegal to block in an RCU read-side
                critical section, what the heck do you do in
                PREEMPT_RT, where normal spinlocks can block???

Answer:         Just as PREEMPT_RT permits preemption of spinlock
                critical sections, it permits preemption of RCU
                read-side critical sections.  It also permits
                spinlocks blocking while in RCU read-side critical
                sections.

                Why the apparent inconsistency?  Because it is it
                possible to use priority boosting to keep the RCU
                grace periods short if need be (for example, if running
                short of memory).  In contrast, if blocking waiting
                for (say) network reception, there is no way to know
                what should be boosted.  Especially given that the
                process we need to boost might well be a human being
                who just went out for a pizza or something.  And although
                a computer-operated cattle prod might arouse serious
                interest, it might also provoke serious objections.
                Besides, how does the computer know what pizza parlor
                the human being went to???


ACKNOWLEDGEMENTS

My thanks to the people who helped make this human-readable, including
Jon Walpole, Josh Triplett, Serge Hallyn, Suzanne Wood, and Alan Stern.


For more information, see http://www.rdrop.com/users/paulmck/RCU.