netfilter: ipt_addrtype: rename to xt_addrtype Followup patch will add ipv6 support. ipt_addrtype.h is retained for compatibility reasons, but no longer used by the kernel. Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: add device group match Add a new 'devgroup' match to match on the device group of the incoming and outgoing network device of a packet. Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: ipset: install ipset related header files Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: remove extraneous header that slipped in Commit 0b8ad87 (netfilter: xtables: add missing header files to export list) erroneously added this. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: add missing header files to export list Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
netfilter: audit target to record accepted/dropped packets This patch adds a new netfilter target which creates audit records for packets traversing a certain chain. It can be used to record packets which are rejected administraively as follows: -N AUDIT_DROP -A AUDIT_DROP -j AUDIT --type DROP -A AUDIT_DROP -j DROP a rule which would typically drop or reject a packet would then invoke the new chain to record packets before dropping them. -j AUDIT_DROP The module is protocol independant and works for iptables, ip6tables and ebtables. The following information is logged: - netfilter hook - packet length - incomming/outgoing interface - MAC src/dst/proto for ethernet packets - src/dst/protocol address for IPv4/IPv6 - src/dst port for TCP/UDP/UDPLITE - icmp type/code Cc: Patrick McHardy <kaber@trash.net> Cc: Eric Paris <eparis@parisplace.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
include: replace unifdef-y with header-y unifdef-y and header-y has same semantic. So there is no need to have both. Drop the unifdef-y variant and sort all lines again Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
netfilter: add xt_cpu match In some situations a CPU match permits a better spreading of connections, or select targets only for a given cpu. With Remote Packet Steering or multiqueue NIC and appropriate IRQ affinities, we can distribute trafic on available cpus, per session. (all RX packets for a given flow is handled by a given cpu) Some legacy applications being not SMP friendly, one way to scale a server is to run multiple copies of them. Instead of randomly choosing an instance, we can use the cpu number as a key so that softirq handler for a whole instance is running on a single cpu, maximizing cache effects in TCP/UDP stacks. Using NAT for example, a four ways machine might run four copies of server application, using a separate listening port for each instance, but still presenting an unique external port : iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 0 \ -j REDIRECT --to-port 8080 iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 1 \ -j REDIRECT --to-port 8081 iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 2 \ -j REDIRECT --to-port 8082 iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 3 \ -j REDIRECT --to-port 8083 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xt_ipvs (netfilter matcher for IPVS) This implements the kernel-space side of the netfilter matcher xt_ipvs. [ minor fixes by Simon Horman <horms@verge.net.au> ] Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: Simon Horman <horms@verge.net.au> [ Patrick: added xt_ipvs.h to Kbuild ] Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: correct CHECKSUM header and export it Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: idletimer target implementation This patch implements an idletimer Xtables target that can be used to identify when interfaces have been idle for a certain period of time. Timers are identified by labels and are created when a rule is set with a new label. The rules also take a timeout value (in seconds) as an option. If more than one rule uses the same timer label, the timer will be restarted whenever any of the rules get a hit. One entry for each timer is created in sysfs. This attribute contains the timer remaining for the timer to expire. The attributes are located under the xt_idletimer class: /sys/class/xt_idletimer/timers/<label> When the timer expires, the target module sends a sysfs notification to the userspace, which can then decide what to do (eg. disconnect to save power). Cc: Timo Teras <timo.teras@iki.fi> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: inclusion of xt_TEE xt_TEE can be used to clone and reroute a packet. This can for example be used to copy traffic at a router for logging purposes to another dedicated machine. References: http://www.gossamer-threads.com/lists/iptables/devel/68781 Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: add CT target Add a new target for the raw table, which can be used to specify conntrack parameters for specific connections, f.i. the conntrack helper. The target attaches a "template" connection tracking entry to the skb, which is used by the conntrack core when initializing a new conntrack. Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: passive OS fingerprint xtables match Passive OS fingerprinting netfilter module allows to passively detect remote OS and perform various netfilter actions based on that knowledge. This module compares some data (WS, MSS, options and it's order, ttl, df and others) from packets with SYN bit set with dynamically loaded OS fingerprints. Fingerprint matching rules can be downloaded from OpenBSD source tree or found in archive and loaded via netfilter netlink subsystem into the kernel via special util found in archive. Archive contains library file (also attached), which was shipped with iptables extensions some time ago (at least when ipt_osf existed in patch-o-matic). Following changes were made in this release: * added NLM_F_CREATE/NLM_F_EXCL checks * dropped _rcu list traversing helpers in the protected add/remove calls * dropped unneded structures, debug prints, obscure comment and check Fingerprints can be downloaded from http://www.openbsd.org/cgi-bin/cvsweb/src/etc/pf.os or can be found in archive Example usage: -d switch removes fingerprints Please consider for inclusion. Thank you. Passive OS fingerprint homepage (archives, examples): http://www.ioremap.net/projects/osf Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: install missing headers iptables imports headers from (the unifdefed headers of a) kernel tree, but some headers happened to not be installed. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: x_tables: add LED trigger target Kernel module providing implementation of LED netfilter target. Each instance of the target appears as a led-trigger device, which can be associated with one or more LEDs in /sys/class/leds/ Signed-off-by: Adam Nielsen <a.nielsen@shikadi.net> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
netfilter: rename ipt_recent to xt_recent Like with other modules (such as ipt_state), ipt_recent.h is changed to forward definitions to (IOW include) xt_recent.h, and xt_recent.c is changed to use the new constant names. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
[NETFILTER]: Make sure xt_policy.h is unifdef'ed. Since the header file xt_policy.h tests __KERNEL__, it should be unifdef'ed before exporting to userspace. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
[NETFILTER]: Rename ipt_iprange to xt_iprange This patch moves ipt_iprange to xt_iprange, in preparation for adding IPv6 support to xt_iprange. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>