arm/tegra: add support for ventana pinmuxing Add support for ventana pinmuxing as a seaboard derivative. This is a cut down version of work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
gpio/tegra: Move Tegra gpio driver to drivers/gpio As part of the gpio driver consolidation, this patch moves the Tegra driver into drivers/gpio Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
ARM: tegra: irq: Move legacy_irq.c into irq.c Now that irq.c is just an interface layer between the gic and legacy_irq.c, move the contents of legacy_irq.c into irq.c. Signed-off-by: Colin Cross <ccross@android.com>
Merge branch 'for-linus' of git://android.git./kernel/tegra * 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: tegra: harmony: initialize the TPS65862 PMIC ARM: tegra: update defconfig ARM: tegra: harmony: update PCI-e initialization sequence ARM: tegra: trimslice: enable MMC/SD slots ARM: tegra: enable new drivers in defconfig ARM: tegra: Add Toshiba AC100 support ARM: tegra: harmony: Set WM8903 gpio_base ARM: tegra: harmony: I2C-related portions of audio support ARM: tegra: harmony: register i2c devices ARM: tegra: seaboard: register i2c devices ARM: tegra: harmony: Beginnings of audio support ARM: tegra: create defines for SD-related GPIO names ARM: tegra: add devices.c entries for audio
Merge branch 'usb-next' of git://git./linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits) USB: Add support for SuperSpeed isoc endpoints xhci: Clean up cycle bit math used during stalls. xhci: Fix cycle bit calculation during stall handling. xhci: Update internal dequeue pointers after stalls. USB: Disable auto-suspend for USB 3.0 hubs. USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol. xhci: Return canceled URBs immediately when host is halted. xhci: Fixes for suspend/resume of shared HCDs. xhci: Fix re-init on power loss after resume. xhci: Make roothub functions deal with device removal. xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports. xhci: Return a USB 3.0 hub descriptor for USB3 roothub. xhci: Register second xHCI roothub. xhci: Change xhci_find_slot_id_by_port() API. xhci: Refactor bus suspend state into a struct. xhci: Index with a port array instead of PORTSC addresses. USB: Set usb_hcd->state and flags for shared roothubs. usb: Make core allocate resources per PCI-device. usb: Store bus type in usb_hcd, not in driver flags. usb: Change usb_hcd->bandwidth_mutex to a pointer. ...
ARM: tegra: harmony: initialize the TPS65862 PMIC Initialize the PMIC voltage regulators and provide the supply map for PCI-e clock supply. The rest of the supplies should be added together with the drivers that use them. Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: tegra: Add support for Tegra USB PHYs Interface used by Tegra's gadget driver and ehci driver to power on and configure the USB PHYs. Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ARM: tegra: Add Toshiba AC100 support This patch adds the config infrastructure, the pinmux and basic board setup code for PAZ00 (name of board inside the AC100/AZ). Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
ARM: tegra: common device resources Add a common location to register resources for used on-chip devices that are commonly configured on boards. Devices will be added to this file as more drivers are added that can make use of them. This is based on work contributed by several people, most of it from Colin Cross and Erik Gilling. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
ARM: tegra: Add external memory controller driver The frequency memory bus on Tegra can be adjusted without disabling accesses to memory by updating the memory configuration registers from a per-board table, and then changing the clock frequency. The clock controller and memory controller have an interlock that prevents the new memory registers from taking effect until the clock frequency change. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
ARM: tegra: clock: Drop CPU dvfs The existing version did not extend well to core dvfs, drop it for now until the new clk api with clk_prepare and clk_unprepare is ready and non-atomic clocks are possible. Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
ARM: tegra: add TrimSlice board Add basic support for CompuLab TrimSlice platform Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Colin Cross <ccross@android.com>
ARM: tegra: Add api to control internal powergating Signed-off-by: Colin Cross <ccross@android.com>
tegra: harmony: enable PCI Express Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Olof Johansson <olof@lixom.net> CC: Gary King <GKing@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com>
tegra: add PCI Express support Change-Id: Ibd0bcd46895eb88952b9db29e1f68572d39aae01 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Arnd Bergmann <arnd@arndb.de> CC: Russell King <linux@arm.linux.org.uk> CC: Gary King <GKing@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com>
[ARM] tegra: Add APB DMA support The APB DMA block handles DMA transfers to and from some peripherals in the Tegra SOC. It reads from sequential addresses on the memory bus, and writes repeatedly to the same address on the APB bus. Two transfer modes are supported, oneshot for transferring a known size to or from a peripheral, and continuous for streaming data. In continuous mode, a callback occurs when the buffer is half full to allow the existing data to be handled and a new request queued.x v2 changes: dma API no longer uses PTR_ERR Signed-off-by: Erik Gilling <konkers@android.com> Signed-off-by: Colin Cross <ccross@android.com>
[ARM] tegra: Add cpufreq support Implement cpufreq support for the Tegra SOC. DVFS is handled by the core virtual cpu clock. The frequencies of the two cores are tied together, the highest frequency requested by either core determines the actual frequency. Signed-off-by: Colin Cross <ccross@android.com>
[ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups - Add drivers to clock lookup table - Add new pll_m entries - Support I2C U16 divider - Fix rate reporting on 32.768kHz clock - Call propagate rate only if set_rate succeeds - Add support for audio_sync clock - Add 24MHz to PLLA frequency list - Correct i2s1/2/spdifout mux - Add suspend support - Fix enable/disable parent clocks in set_parent - Add max_rate parameter to all clocks - DVFS support - Add virtual cpu clock with dvfs - Support clk_round_rate - Fix requesting very high periph frequencies - Add quirks for PLLU: PLLU is slightly different from the rest of the PLLs. The lock enable bit is at bit 22 instead of 18 in the MISC register, and the post divider field is a single bit with reversed values from other PLLs. - Simplify recalculating clock rates - Fix UART divider flags - Remove unused clock ops Signed-off-by: Colin Cross <ccross@android.com>