#Let's ask the user about clockspeed
-while ! cpusel=$(zenity --title="Optional settings" --width="400" --height="350" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1100" "Clockspeed: 1,1Ghz, OPP5 (should be stable on 1GHz units)" "1000" "Clockspeed: 1GHz, OPP5 (probably unstable on 600Mhz units)" "800" "Clockspeed: 800MHz, OPP5 (should be stable on all units)" "600" "Default Speed: 600MHz, OPP3 (stable on all units, longest battery time)" --ok-label="Select CPU Profile" ); do
+while ! cpusel=$(zenity --title="Optional settings" --width="400" --height="350" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1100" "Clockspeed: 1,1Ghz, OPP5 (should be stable on 1GHz units)" "1000" "Clockspeed: 1GHz, OPP5 (most probably unstable on 600Mhz units)" "8003" "Clockspeed: 800MHz, OPP3 (Stable on 1GHz units, probably unstable on 600MHz units)" "800" "Clockspeed: 800MHz, OPP5 (600MHz units only, should be stable on all units)" "600" "Clockspeed: 600MHz, OPP3 (600 MHz units only)" --ok-label="Select CPU Profile" ); do
zenity --title="Error" --error --text="Please select your desired CPU Speed profile." --timeout=6
done
default_cpu=800
;;
+ "8003")
+ echo 3 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
+ /usr/pandora/scripts/op_cpuspeed.sh -n 800
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 800MHz." --timeout 6
+ ;;
+
+
"600")
echo 3 > /proc/pandora/cpu_opp_max
sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
# CPU-Settings, v1.1, written by Michael Mrozek aka EvilDragon 2011.
# This scripts allows you to change Pandora CPU-Settings.
-while mainsel=$(zenity --title="CPU-Settings" --width="400" --height="380" --list --column "id" --column "Please select" --hide-column=1 --text="Welcome to the CPU-Settings.\nHere, you can configure the behaviour of your CPU \nThis can make your Pandora run faster but also more unstable.\n\nDon't worry though, you cannot permanently damage your unit.\n\nWhat do you want to do?\n" "profile" "Quick-Setup: Select from different profiles" "opp" "Set the max allowed OPP level" "mhz" "Set the minimum / maximum allowed MHz" "warning" "Change warning settings" "defaultmhz" "Set the default MHz" --ok-label="Change Setting" --cancel-label="Exit"); do
+while mainsel=$(zenity --title="CPU-Settings" --width="400" --height="380" --list --column "id" --column "Please select" --hide-column=1 --text="Welcome to the CPU-Settings.\nHere, you can configure the behaviour of your CPU \nThis can make your Pandora run faster but also more unstable.\n\nDon't worry though, you cannot permanently damage your unit.\n\nWhat do you want to do?\n" "profile" "Quick-Setup: Select from different profiles" "opp" "Set the max allowed OPP level" "mhz" "Set the maximum allowed MHz" "warning" "Change warning settings" "defaultmhz" "Set the default maximum MHz" --ok-label="Change Setting" --cancel-label="Exit"); do
case $mainsel in
"profile")
- cpusel=$(zenity --title="Optional settings" --width="400" --height="350" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1100" "Clockspeed: 1,1Ghz, OPP5 (should be stable on 1GHz units)" "1000" "Clockspeed: 1GHz, OPP5 (most probably unstable on 600Mhz units)" "800" "Clockspeed: 800MHz, OPP5 (should be stable on all units)" "600" "Clockspeed: 600MHz, OPP3 (stable on all units, longest battery time)" --ok-label="Select CPU Profile" )
+ cpusel=$(zenity --title="Optional settings" --width="400" --height="350" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1100" "Clockspeed: 1,1Ghz, OPP5 (should be stable on 1GHz units)" "1000" "Clockspeed: 1GHz, OPP5 (most probably unstable on 600Mhz units)" "8003" "Clockspeed: 800MHz, OPP3 (Stable on 1GHz units, probably unstable on 600MHz units)" "800" "Clockspeed: 800MHz, OPP5 (600MHz units only, should be stable on all units)" "600" "Clockspeed: 600MHz, OPP3 (600 MHz units only)" --ok-label="Select CPU Profile" )
case $cpusel in
"1100")
sed -i "s/.*default.*/default:1100/g" /etc/pandora/conf/cpu.conf
sed -i "s/.*safe.*/safe:1100/g" /etc/pandora/conf/cpu.conf
/usr/pandora/scripts/op_cpuspeed.sh -n 1100
- zenity --info --title="CPU Speed set" --text "The CPU Speed has been set to 1,1GHz." --timeout 6
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1,1GHz." --timeout 6
;;
"1000")
sed -i "s/.*default.*/default:1000/g" /etc/pandora/conf/cpu.conf
sed -i "s/.*safe.*/safe:1000/g" /etc/pandora/conf/cpu.conf
/usr/pandora/scripts/op_cpuspeed.sh -n 1000
- zenity --info --title="CPU Speed set" --text "The CPU Speed has been set to 1GHz." --timeout 6
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1GHz." --timeout 6
;;
"800")
sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
/usr/pandora/scripts/op_cpuspeed.sh -n 800
- zenity --info --title="CPU Speed set" --text "The CPU Speed has been set to 800MHz." --timeout 6
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 800MHz." --timeout 6
+ ;;
+
+ "8003")
+ echo 3 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
+ /usr/pandora/scripts/op_cpuspeed.sh -n 800
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 800MHz." --timeout 6
;;
"600")
sed -i "s/.*default.*/default:600/g" /etc/pandora/conf/cpu.conf
sed -i "s/.*safe.*/safe:600/g" /etc/pandora/conf/cpu.conf
/usr/pandora/scripts/op_cpuspeed.sh -n 600
- zenity --info --title="CPU Speed set" --text "The CPU Speed has been set to 600Mhz." --timeout 6
+ zenity --info --title="CPU Speed set" --text "The maxmimum CPU Speed has been set to 600Mhz." --timeout 6
;;
esac
"opp")
opp="$(cat /etc/pandora/conf/cpu.conf | grep opp | awk -F\: '{print $2}')"
- if zenity --question --title="OPP Setting Info" --text="WARNING!\n\nIncreasing the maximum allowed OPP will allow you to overclock to higher values.\n\nHowever, besides using more power, it ALSO DECREASES THE LIFETIME OF YOUR CPU!\n\nBe absolutely sure you know what you are doing here. \n\nThe standard OPP setting is 3, everything above is out of the specification!" --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
+ if zenity --question --title="OPP Setting Info" --text="WARNING!\n\nIncreasing the maximum allowed OPP will allow you to overclock to higher values.\n\nHowever, besides using more power, it ALSO DECREASES THE LIFETIME OF YOUR CPU!" --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
if newopp=$(zenity --scale --text "Set the maximum allowed OPP" --min-value=3 --max-value=5 --value=$opp --step 1); then
echo $newopp > /proc/pandora/cpu_opp_max
sed -i "s/.*maxopp.*/maxopp:$newopp/g" /etc/pandora/conf/cpu.conf
min="$(cat /etc/pandora/conf/cpu.conf | grep min | awk -F\: '{print $2}')"
max="$(cat /etc/pandora/conf/cpu.conf | grep max: | awk -F\: '{print $2}')"
defspeed="$(cat /etc/pandora/conf/cpu.conf | grep default | awk -F\: '{print $2}')"
- if zenity --question --title="MHz Setting Info" --text="This setting can set the allowed range apps can use on your Pandora.\n\nToo high CPU settings can render your Pandora unstable and crash it. This can lead to data loss!\n\nBe absolutely sure you know what you are doing here.\n\nThe standard maximum setting is 800MHz, the standard minimum setting 125MHz." --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
+ if zenity --question --title="MHz Setting Info" --text="This setting can set the allowed range apps can use on your Pandora.\n\nToo high CPU settings can render your Pandora unstable and crash it. This can lead to data loss!\n\nPlease note: The allowed minimum-CPU-Speed depends on the set OPP-Value, so it might be your system ignores maximum CPU-Speeds which are set too low.\n\nBe absolutely sure you know what you are doing here.\n\n" --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
if newmax=$(zenity --scale --text "Set the maximum allowed MHz" --min-value=500 --max-value=1300 --value=$max --step 1); then
- if newmin=$(zenity --scale --text "Set the minimum allowed MHz" --min-value=20 --max-value=500 --value=$min --step 1); then
sed -i "s/.*max:.*/max:$newmax/g" /etc/pandora/conf/cpu.conf
- sed -i "s/.*min:.*/min:$newmin/g" /etc/pandora/conf/cpu.conf
if [ "$defspeed" -gt "$newmax" ]; then
sed -i "s/.*default.*/default:$newmax/g" /etc/pandora/conf/cpu.conf
- zenity --info --title="Default speed info" --text "As your default speed was set higher than your new maximum,\nit has been changed to the new maximum speed." --timeout 6
+ zenity --info --title="Default speed info" --text "As your default speed was set higher than your new maximum, it has been changed to the new maximum speed." --timeout 6
/usr/pandora/scripts/op_cpuspeed.sh -n $newmax
fi
- zenity --info --title="MHz range set" --text "Your Pandora can now set the CPU clock between $newmin and $newmax MHz." --timeout 6
+ zenity --info --title="MHz range set" --text "The maximum allowed CPU Speed of your Pandora is now $newmax MHz.\n\nPlease note that some OPP-Settings require a minimum-CPU-Speed. If your maximum set CPU Speed is below that value, it will be ignored." --timeout 6
else
zenity --info --title="No change" --text "The CPU Speed has not been changed." --timeout 6
- fi
else
zenity --info --title="No change" --text "The CPU Speed has not been changed." --timeout 6
fi
safe="$(cat /etc/pandora/conf/cpu.conf | grep safe | awk -F\: '{print $2}')"
min="$(cat /etc/pandora/conf/cpu.conf | grep min | awk -F\: '{print $2}')"
max="$(cat /etc/pandora/conf/cpu.conf | grep max: | awk -F\: '{print $2}')"
- if zenity --question --title="Warning Setting Info" --text="The Pandora usually displays a warning if you try to overclock.\n\nYou can either select at what speed the warning should appear or disable it completely.\n\nBe absolutely sure you know what you are doing here.\n\nThe standard setting is 600MHz." --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
+ if zenity --question --title="Warning Setting Info" --text="The Pandora can display a warning if you try to overclock.\n\nYou can either select at what speed the warning should appear or disable it completely.\n\nBe absolutely sure you know what you are doing here.\n\nThe standard setting is 600MHz." --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
if zenity --question --title="Disable Warning?" --text="Do you want to enable or disable the warning?" --ok-label="Enable it" --cancel-label="Disable it"; then
if newsafe=$(zenity --scale --text "At what speed should the warning appear?" --min-value=$min --max-value=$max --value=$safe --step 1); then
sed -i "s/.*warn.*/warn:yes/g" /etc/pandora/conf/cpu.conf
if newdefault=$(zenity --scale --text "Set the default CPU speed" --min-value=$min --max-value=$max --value=$defspeed --step 1); then
/usr/pandora/scripts/op_cpuspeed.sh -n $newdefault
sed -i "s/.*default.*/default:$newdefault/g" /etc/pandora/conf/cpu.conf
- zenity --info --title="Default speed set" --text "The default clock speed has been set to $newdefault." --timeout 6
+ zenity --info --title="Default speed set" --text "The default clock speed has been set to $newdefault.\n\nPlease note that some OPP-Settings require a minimum-CPU-Speed. If your default set CPU Speed is below that value, it will be ignored." --timeout 6
else
zenity --info --title="No change" --text "The default CPU speed has not been changed." --timeout 6
fi