#!/bin/bash
# Released under the GPL
-# Nub-Settings, v1.0, written by Michael Mrozek aka EvilDragon 2010
+# Nub-Settings, v1.1, written by Michael Mrozek aka EvilDragon 2010
# This scripts allows you to configure all parameters of the Pandora-Nubs. The left and right nub can both be configured individually.
-while mainsel=$(zenity --title="Nub-Configuration" --width="430" --height="400" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "nub0mode" "Change the mode for the left nub" "nub0msense" "Change the mouse speed for the left nub" "nub0ssense" "Change the scroll sensitivity for the left nub" "nub0rate" "Change the scroll speed for the left nub" "nub0thres" "Change the mouse button sensitivity for the left nub" "nub1mode" "Change the mode for the right nub" "nub1msense" "Change the mouse speed for the right nub" "nub1ssense" "Change the scroll sensitivity for the right nub" "nub1rate" "Change the scroll speed for the right nub" "nub1thres" "Change the mouse button sensitivity for the right nub" "default" "Restore default settings for both nubs"); do
+while mainsel=$(zenity --title="Nub-Configuration" --width="380" --height="200" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "leftnub" "Configure left nub" "rightnub" "Configure right nub" "default" "Restore default settings for both nubs"); do
case $mainsel in
+ "leftnub")
- "nub0mode")
- if nubm=$(zenity --height=300 --list --title="Select Nub-mode for the left nub" --text="Please select the modus for the left nub.\n\nNote: This can affect running programs.\nSome programs also may change the nub mode themselves." --column "return" --hide-column=1 --column "Nub Mode" "mouse" "Use the nub as mouse" "mbuttons" "Use the nub for mousebuttons" "scroll" "Use the nub for scrolling" "absolute" "Use the nub as joystick") ; then
+ while leftsel=$(zenity --title="Configure Left Nub" --width="430" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "nub0mode" "Change Nub mode" "nub0msense" "Change the mouse speed" "nub0ssense" "Change the scroll sensitivity" "nub0rate" "Change the scroll speed" "nub0thres" "Change the mouse button sensitivity" "nub0reset" "Reset Nub"); do
+ case $leftsel in
- echo $nubm > /proc/pandora/nub0/mode
- fi;;
+ "nub0mode")
+ if nubm=$(zenity --height=300 --list --title="Select Nub-mode for the left nub" --text="Please select the modus for the left nub.\n\nNote: This can affect running programs.\nSome programs also may change the nub mode themselves." --column "return" --hide-column=1 --column "Nub Mode" "mouse" "Use the nub as mouse" "mbuttons" "Use the nub for mousebuttons" "scroll" "Use the nub for scrolling" "absolute" "Use the nub as joystick") ; then
- "nub0msense")
- curmsense=$(cat /proc/pandora/nub0/mouse_sensitivity)
- newmsense=$(zenity --scale --text "Set speed for left nub mouse.\nThe default value is 150. Higher value means faster mouse." --min-value=50 --max-value=300 --value=$curmsense --step 1)
- echo $newmsense > /proc/pandora/nub0/mouse_sensitivity
- ;;
+ echo $nubm > /proc/pandora/nub0/mode
+ fi;;
+
+ "nub0msense")
+ curmsense=$(cat /proc/pandora/nub0/mouse_sensitivity)
+ newmsense=$(zenity --scale --text "Set speed for left nub mouse.\nThe default value is 150. Higher value means faster mouse." --min-value=50 --max-value=300 --value=$curmsense --step 1)
+ echo $newmsense > /proc/pandora/nub0/mouse_sensitivity
+ ;;
- "nub0ssense")
- curssense=$(cat /proc/pandora/nub0/scrollx_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the left nub for the X-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub0/scrollx_sensitivity
- curssense=$(cat /proc/pandora/nub0/scrolly_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the left nub for the Y-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub0/scrolly_sensitivity
- ;;
+ "nub0ssense")
+ curssense=$(cat /proc/pandora/nub0/scrollx_sensitivity)
+ newssense=$(zenity --scale --text "Set the scroll sensitivity for the left nub for the X-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
+ echo $newssense > /proc/pandora/nub0/scrollx_sensitivity
+ curssense=$(cat /proc/pandora/nub0/scrolly_sensitivity)
+ newssense=$(zenity --scale --text "Set the scroll sensitivity for the left nub for the Y-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
+ echo $newssense > /proc/pandora/nub0/scrolly_sensitivity
+ ;;
- "nub0rate")
- currate=$(cat /proc/pandora/nub0/scroll_rate)
- newrate=$(zenity --scale --text "Set the scroll speed for the left nub.\nThe default value is 20. Higher value means more sensitive." --min-value=1 --max-value=40 --value=$currate --step 1)
- echo $newrate > /proc/pandora/nub0/scroll_rate
- ;;
+ "nub0rate")
+ currate=$(cat /proc/pandora/nub0/scroll_rate)
+ newrate=$(zenity --scale --text "Set the scroll speed for the left nub.\nThe default value is 20. Higher value means more sensitive." --min-value=1 --max-value=40 --value=$currate --step 1)
+ echo $newrate > /proc/pandora/nub0/scroll_rate
+ ;;
- "nub0thres")
- curthres=$(cat /proc/pandora/nub0/mbutton_threshold)
- newthres=$(zenity --scale --text "Change the mousebutton sensitivity for the left nub.\nThe default value is 20.\nThe higher the value the higher you need to move the nub" --min-value=1 --max-value=40 --value=$curthres --step 1)
- echo $newthres > /proc/pandora/nub0/mbutton_threshold
- ;;
-
- "nub1mode")
- if nubm=$(zenity --height=300 --list --title="Select Nub-mode for the right nub" --text="Please select the modus for the right nub.\n\nNote: This can affect running programs.\nSome programs also may change the nub mode themselves." --column "return" --hide-column=1 --column "Nub Mode" "mouse" "Use the nub as mouse" "mbuttons" "Use the nub for mousebuttons" "scroll" "Use the nub for scrolling" "absolute" "Use the nub as joystick") ; then
+ "nub0thres")
+ curthres=$(cat /proc/pandora/nub0/mbutton_threshold)
+ newthres=$(zenity --scale --text "Change the mousebutton sensitivity for the left nub.\nThe default value is 20.\nThe higher the value the higher you need to move the nub" --min-value=1 --max-value=40 --value=$curthres --step 1)
+ echo $newthres > /proc/pandora/nub0/mbutton_threshold
+ ;;
+
+ "nub0reset")
+ echo 1 > /sys/bus/i2c/drivers/vsense/3-0066/reset
+ sleep 1
+ echo 0 > /sys/bus/i2c/drivers/vsense/3-0066/reset
+ curmode=$(cat /proc/pandora/nub0/mode)
+ echo mouse > /proc/pandora/nub0/mode
+ while ! zenity --question --title="Resetted left nub" --text="The left nub has been resetted.\nPlease try to move the mouse cursor\nto test if it is working properly." --ok-label="Working properly" --cancel-label="Reset again"; do
+ echo 1 > /sys/bus/i2c/drivers/vsense/3-0066/reset
+ sleep 1
+ echo 0 > /sys/bus/i2c/drivers/vsense/3-0066/reset
+ done
+ echo curmode > /proc/pandora/nub0/mode
+ ;;
+ esac
+ done
+ ;;
+
+ "rightnub")
+
+ while rightsel=$(zenity --title="Configure Right Nub" --width="430" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="What do you want to do?" "nub1mode" "Change Nub mode" "nub1msense" "Change the mouse speed" "nub1ssense" "Change the scroll sensitivity" "nub1rate" "Change the scroll speed" "nub1thres" "Change the mouse button sensitivity" "nub1reset" "Reset Nub"); do
+ case $rightsel in
+
+ "nub1mode")
+ if nubm=$(zenity --height=300 --list --title="Select Nub-mode for the right nub" --text="Please select the modus for the right nub.\n\nNote: This can affect running programs.\nSome programs also may change the nub mode themselves." --column "return" --hide-column=1 --column "Nub Mode" "mouse" "Use the nub as mouse" "mbuttons" "Use the nub for mousebuttons" "scroll" "Use the nub for scrolling" "absolute" "Use the nub as joystick") ; then
- echo $nubm > /proc/pandora/nub1/mode
- fi;;
+ echo $nubm > /proc/pandora/nub1/mode
+ fi;;
- "nub1msense")
- curmsense=$(cat /proc/pandora/nub1/mouse_sensitivity)
- newmsense=$(zenity --scale --text "Set speed for right nub mouse.\nThe default value is 150. Higher value means faster mouse." --min-value=50 --max-value=300 --value=$curmsense --step 1)
- echo $newmsense > /proc/pandora/nub1/mouse_sensitivity
- ;;
+ "nub1msense")
+ curmsense=$(cat /proc/pandora/nub1/mouse_sensitivity)
+ newmsense=$(zenity --scale --text "Set speed for right nub mouse.\nThe default value is 150. Higher value means faster mouse." --min-value=50 --max-value=300 --value=$curmsense --step 1)
+ echo $newmsense > /proc/pandora/nub1/mouse_sensitivity
+ ;;
- "nub1ssense")
- curssense=$(cat /proc/pandora/nub1/scrollx_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the right nub for the X-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub1/scrollx_sensitivity
- curssense=$(cat /proc/pandora/nub1/scrolly_sensitivity)
- newssense=$(zenity --scale --text "Set the scroll sensitivity for the right nub for the Y-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
- echo $newssense > /proc/pandora/nub1/scrolly_sensitivity
- ;;
+ "nub1ssense")
+ curssense=$(cat /proc/pandora/nub1/scrollx_sensitivity)
+ newssense=$(zenity --scale --text "Set the scroll sensitivity for the right nub for the X-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
+ echo $newssense > /proc/pandora/nub1/scrollx_sensitivity
+ curssense=$(cat /proc/pandora/nub1/scrolly_sensitivity)
+ newssense=$(zenity --scale --text "Set the scroll sensitivity for the right nub for the Y-Axis.\nThe default value is 7. Higher value means more sensitive.\nA negative value inverts the axis." --min-value=-32 --max-value=32 --value=$curssense --step 1)
+ echo $newssense > /proc/pandora/nub1/scrolly_sensitivity
+ ;;
- "nub1rate")
- currate=$(cat /proc/pandora/nub1/scroll_rate)
- newrate=$(zenity --scale --text "Set the scroll speed for the right nub.\nThe default value is 20. Higher value means more sensitive." --min-value=1 --max-value=40 --value=$currate --step 1)
- echo $newrate > /proc/pandora/nub1/scroll_rate
- ;;
+ "nub1rate")
+ currate=$(cat /proc/pandora/nub1/scroll_rate)
+ newrate=$(zenity --scale --text "Set the scroll speed for the right nub.\nThe default value is 20. Higher value means more sensitive." --min-value=1 --max-value=40 --value=$currate --step 1)
+ echo $newrate > /proc/pandora/nub1/scroll_rate
+ ;;
- "nub1thres")
- curthres=$(cat /proc/pandora/nub1/mbutton_threshold)
- newthres=$(zenity --scale --text "Change the mousebutton sensitivity for the right nub.\nThe default value is 20.\nThe higher the value the higher you need to move the nub" --min-value=1 --max-value=40 --value=$curthres --step 1)
- echo $newthres > /proc/pandora/nub1/mbutton_threshold
- ;;
- "default")
+ "nub1thres")
+ curthres=$(cat /proc/pandora/nub1/mbutton_threshold)
+ newthres=$(zenity --scale --text "Change the mousebutton sensitivity for the right nub.\nThe default value is 20.\nThe higher the value the higher you need to move the nub" --min-value=1 --max-value=40 --value=$curthres --step 1)
+ echo $newthres > /proc/pandora/nub1/mbutton_threshold
+ ;;
+
+ "nub1reset")
+ echo 1 > /sys/bus/i2c/drivers/vsense/3-0067/reset
+ sleep 1
+ echo 0 > /sys/bus/i2c/drivers/vsense/3-0067/reset
+ curmode=$(cat /proc/pandora/nub1/mode)
+ echo mouse > /proc/pandora/nub1/mode
+ while ! zenity --question --title="Resetted right nub" --text="The right nub has been resetted.\nPlease try to move the mouse cursor\nto test if it is working properly." --ok-label="Working properly" --cancel-label="Reset again"; do
+ echo 1 > /sys/bus/i2c/drivers/vsense/3-0067/reset
+ sleep 1
+ echo 0 > /sys/bus/i2c/drivers/vsense/3-0067/reset
+ done
+ echo curmode > /proc/pandora/nub1/mode
+ ;;
+ esac
+ done
+ ;;
+
+"default")
echo mouse > /proc/pandora/nub0/mode
echo 150 > /proc/pandora/nub0/mouse_sensitivity
echo 7 > /proc/pandora/nub0/scrollx_sensitivity
git.openpandora.org / openpandora.oe.git / blobdiff