#!/bin/sh
-# Based on the scripts by JohnX/Mer Project - http://wiki.maemo.org/Mer/
+# Initially based on the scripts by JohnX/Mer Project - http://wiki.maemo.org/Mer/
# Reworked for the OpenPandora - John Willis/Michael Mrozek
# You can start the wizard from the shell using 'xinit ./first-boot-init.sh'
-# Maybe we run it for the first time from rc5.d and delete the symlink at the end of the script?
export LANG=en_GB.UTF-8
export GTK2_RC_FILES=/usr/share/themes/Xfce/gtk-2.0/gtkrc
+xmodmap /etc/skel/.pndXmodmap
# Ensure there is a wheel group for sudoers to be put into.
# TODO: Do this somewhere better.
groupadd wheel
-# We load up a background image here
-export WALLPAPER=/usr/share/xfce4/backdrops/op-firstrun.png
+# We load up a background image here.
+export WALLPAPER='/usr/share/xfce4/backdrops/op-firstrun.png'
hsetroot -center $WALLPAPER
-# Greet the user
-zenity --info --title="Pandoras Box has been opened." --text "Welcome. This wizard will help you setting up your new OpenPandora handheld before the first use."
+# Find out what unit the user has.
+pnd_version=$(dmesg | grep OMAP3 | grep ES | awk '{print $3}')
+es_version=$(dmesg | grep OMAP3 | grep ES | awk '{print $4}')
+if [ "$pnd_version" == "OMAP3630" ]; then
+ pnd_version="1GHz"
+fi
+ if [ "$pnd_version" == "OMAP3430/3530" ]; then
+ pnd_version="Rebirth"
+ if [ "$es_version" == "ES2.1" ]; then
+ pnd_version="Classic"
+ fi
+fi
+
+# Default error message (should a user hit cancel, validation fail etc.).
+ERROR_WINDOW='zenity --title="Error" --error --text="Sorry! Please try again." --timeout 6'
+
+RESET_ROOT="yes"
+
+xset s off
+xset -dpms
-# Calibrate touchscreen?
-if zenity --question --title="Touchscreen calibration" --text="It is recommended to calibrate the devices touchscreen./nDo you wish to calibrate your touchscreen now?" --ok-label="Calibrate" --cancel-label="Do not calibrate"; then
- # Make sure we have a sane environment as this script will be run long before any /etc/profile stuff.
- . /etc/profile.d/tslib.sh
- # rm /etc/pointercal
- /usr/bin/ts_calibrate
+#Stop WiFi
+rmmod board_omap3pandora_wifi wl1251_sdio wl1251
+
+# Greet the user.
+
+if zenity --question --title="Pandoras Box has been opened." --text="Welcome!\n\nPandora's Box has been opened.\n\nThis wizard will help you setting up your $pnd_version OpenPandora handheld before the first use.\n\nYou will be asked a few simple questions to personalise and configure your device.\n\nDo you want to set up your unit now or shut the unit down and do it later?" --ok-label="Start now" --cancel-label="Shutdown" ; then
+# ----
+
+# Calibrate touchscreen.
+
+if zenity --question --title="Calibrate Touchscreen" --text="It is recommended to calibrate the touchscreen to make sure it accurately works.\n\nIf you do so, you will see a moving crosshair.\nUse the stylus to press the crosshair as accurate as possible.\n\nYou can always (re-)calibrate it from the Settings-Menu later in the OS as well." --ok-label="Calibrate Touchscreen" --cancel-label="Don't calibrate it"; then
+ . /etc/profile
+ TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
+ /usr/pandora/scripts/op_touchinit.sh
+while ! zenity --question --title="Check Calibration" --text="Your new calibration setting has been applied.\n\nPlease check if the touchscreen is now working properly.\nIf not, you might want to try a recalibration.\n\n(Hint: use the nubs to press the button if the touchscreen is way off)" --ok-label="The touchscreen is fine" --cancel-label="Recalibrate"; do
+ TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
+ /usr/pandora/scripts/op_touchinit.sh
+done
fi
-# Should we really enable SWAP?
-#swap_part=$(sfdisk -l /dev/mmcblk? | grep swap | cut -d" " -f1)
-#if [ x$swap_part != x ] ; then
-# use_swap=$(zenity --title="Enable swap?" --text "Swap partition found. Would you like to use it?" --list --radiolist --column " " --column "Answer" TRUE "Use swap on $swap_part" FALSE "Do not use swap")
-# if [ "$use_swap" = "Use swap on $swap_part" ] ; then
-# swapon $swap_part
-# echo "$swap_part none swap sw 0 0" >> /etc/fstab
-# fi
-#fi
+# Reset ROOT's password to something random
-# First, setup the full name and username.
+# (I know the image build sets the password to something pusdo-random)
+# (ok, urandom is not 100% secure but it's good enough for our needs)
-while ! name=$(zenity --title="Enter your name" --entry --text "Please enter your full name.") || [ "x$name" = "x" ] ; do
- zenity --title="Error" --error --text="Please try again."
+if [ $RESET_ROOT == "yes" ]; then
+ rootpwd=$(cat /dev/urandom|tr -dc "a-zA-Z0-9-_\$\?"|fold -w 30|head -n 1)
+passwd "root" <<EOF
+$rootpwd
+$rootpwd
+EOF
+ rootpwd=""
+fi
+
+# ----
+
+# Setup the full name and username.
+
+while ! name=$(zenity --title="Please enter your full name" --entry --text "Please enter your full name.") || [ "x$name" = "x" ] ; do
+ zenity --title="Error" --error --text="Please try again." --timeout 6
done
username_guess=$(echo "$name" | cut -d" " -f1 | tr A-Z a-z)
-while ! username=$(zenity --title="Enter your username" --entry --text "Please choose a short username.
-It should be all lowercase and
-contain only letters and numbers." --entry-text "$username_guess") || [ "x$username" = "x" ] ; do
- zenity --title="Error" --error --text="Please try again."
+while ! username=$(zenity --title="Enter your username" --entry --text "Please choose a short username.\n\nIt should be all lowercase and contain only letters and numbers." --entry-text "$username_guess") || [ "x$username" = "x" ] ; do
+ zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev "$username" ; do
- username=$(zenity --title="Please check username" --entry --text "Please be sure that your
-username consists of only
-letters and numbers." --entry-text "$username")
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
+ username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
-sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
+# ----
-# Password setup.
+# Setup the users password.
password=""
while [ x$password = x ] ; do
- password1=$(zenity --title=Password --entry --text="Choose a new password." --hide-text)
+ password1=$(zenity --title=Password --entry --text="Please choose a new password." --hide-text)
password2=$(zenity --title=Confirm --entry --text="Confirm your new password." --hide-text)
if [ $password1 != $password2 ] ; then
- zenity --title="Error" --error --text="Passwords don't match.
-Please try again."
- else if [ x$password1 = x ] ; then
- zenity --title="Error" --error --text="Password can not be blank!
-Please try again."
+ zenity --title="Error" --error --text="The passwords do not match.\n\nPlease try again." --timeout 6
+ else
+ if [ x$password1 = x ] ; then
+ zenity --title="Error" --error --text="Password cannot be blank!\n\nPlease try again." --timeout 6
else
password=$password1
fi
$password
EOF
-# Name our little baby
+# ----
-while ! hostname=$(zenity --title="Name your Pandora" --entry --text "Please choose a name for
-your Pandora. It should only contain
-letters, numbers and dashes." --entry-text "$username-pandora") || [ "x$hostname" = "x" ]; do
+# Pick a name for the OpenPandora.
+
+while ! hostname=$(zenity --title="Name your Pandora" --entry --text "Please choose a name for your OpenPandora.\n\nIt should only contain letters, numbers and dashes, no spaces." --entry-text "$username-openpandora") || [ "x$hostname" = "x" ]; do
zenity --title="Error" --error --text="Please try again."
done
+
+echo $hostname > /etc/hostname
+hostname =$(sed 's/ /_/g' /etc/hostname)
echo $hostname > /etc/hostname
echo "127.0.0.1 localhost.localdomain localhost $hostname" > /etc/hosts
-#cat /usr/share/first-boot-wizard/hosts-template >> /etc/hosts
hostname -F /etc/hostname
-
# Set the correct user for Autologin and enable / disable it.
-if zenity --question --title="Autologin" --text="Do you want to automatically login on startup?\n\nSecurity warning: This skips the password check on startup" --ok-label="Yes, enable Autologin" --cancel-label="Do not enable Autologin"; then
- # echo "PREFERED_USER=$username" > /etc/default/autologin
- sed -i 's/.*auto_login.*/auto_login yes/g' /etc/slim.conf
- else
- sed -i 's/.*auto_login.*/auto_login no/g' /etc/slim.conf
+if zenity --question --title="Autologin" --text="If you like, you can setup your Pandora to autologin into the system at startup.\nWhile this is more convenient for most users, it features a potential security issue, as no password will be needed to access your desktop and personal files.\n\nDo you wish to automatically login at startup?" --ok-label="Yes" --cancel-label="No"; then
+ # echo "PREFERED_USER=$username" > /etc/default/autologin
+ sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
+ sed -i 's/.*auto_login.*/auto_login yes/g' /etc/slim.conf
+else
+ if zenity --question --title="User" --text="Do you wish to have your username automatically populated in the login screen?\n\nNote: This is ideal if you're the only user of the OpenPandora but wish to disable autologin and use a password." --ok-label="Yes" --cancel-label="No"; then
+ sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
+ sed -i 's/.*auto_login.*/auto_login no/g' /etc/slim.conf
+ else
+ sed -i "s/.*default_user.*/default_user/g" /etc/slim.conf
+ sed -i 's/.*auto_login.*/auto_login no/g' /etc/slim.conf
+ fi
+fi
+
+# ----
+
+# Select the default interface and setup SLiM to pass that as a sesion to ~./.xinitrc
+
+selection=""
+while [ x$selection = x ]; do
+selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=310 --title="Select the Default GUI" --list --column "Name" --column "Description" --text "You can now select your preferred GUI - the GUI that will be loaded automatically on startup of the unit.\n\nYou can either select XFCE4, which is a full desktop environment (similar to a normal PC).\nOr you could select MiniMenu, which is a minimal UI similar to gaming devices.\n\nIf you select the last choice (GUISwitch), you will be prompted to choose a GUI each time you boot your Pandora.\n\nThis setting can always be changed later by running the Startup-Settings." )
+if [ x$selection = x ]; then
+ zenity --title="Error" --error --text="Please select a GUI." --timeout=6
+fi
+done
+
+echo $selection
+
+gui=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $3}')
+stopcommand=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $4}')
+
+echo $gui
+
+if [ $gui ]; then
+ sed -i "s/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=$gui/g" /home/$username/.xinitrc
+ echo $selection selected as default interface
+ zenity --info --title="Selected session" --text "You selected $selection as default setting." --timeout 6
+else
+ sed -i 's/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=startxfce4/g' /home/$username/.xinitrc
fi
-# Change the default session in SLiM.
+# ----
+
+# Set the timezone and date/time
+
+while ! area=$(zenity --list --title "Select your time zone" --text="Please select your area" --column="Select your area" --print-column=1 "Africa" "America" "Asia" "Australia" "Europe" "Pacific" --width=500 --height=260) || [ "x$area" = "x" ] ; do
+ zenity --title="Error" --error --text="Please select your area." --timeout=6
+done
+
+while ! timezone=$(ls -1 /usr/share/zoneinfo/$area | zenity ---width=500 --height=200 --title="Select your closest location" --list --column "Closest Location" --text "Please select the location closest to you") || [ "x$timezone" = "x" ] ; do
+ zenity --title="Error" --error --text="Please select your location." --timeout=6
+done
+
+echo $timezone
+rm /etc/localtime && ln -s /usr/share/zoneinfo/$area/$timezone /etc/localtime
+
+#Make sure we clean up any leading zeros in the day (as Zenity freaks out)
+date_d=`date +%d | sed 's/^0//'`
+date_m=`date +%m | sed 's/^0//'`
+date_y=`date +%Y`
+
+while ! date=$(zenity --calendar --text="Please select the current date" --title "Please select the current date" --day=$date_d --month=$date_m --year=$date_y --date-format="%Y%m%d" --width=500) || [ "x$date" = "x" ] ; do
+ zenity --title="Error" --error --text="Please select the date." --timeout 6
+done
+
+echo $date
+
+time_h=`date +%H`
+time_m=`date +%M`
+
+while ! time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
+ zenity --title="Error" --error --text="Please input the time." --timeout 6
+done
+
+while ! date -d $time ; do
+ time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n" --entry-text "$time_h:$time_m")
+done
+
+date +%Y%m%d -s $date
+date +%H:%M -s $time
+hwclock -u -w
+
+
+# Let the user choose his desired clockspeed.
+
+if [ "$pnd_version" == "1GHz" ]; then
+ cpusel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1200" "Clockspeed: 1,2Ghz, OPP4 (probably unstable)" "1100" "Clockspeed: 1,1Ghz, OPP4 (should be stable)" "1000" "Clockspeed: 1GHz, OPP4 (Default Speed)" --ok-label="Select CPU Profile" )
+ else
+ cpusel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "900" "Clockspeed: 900Mhz, OPP5 (probably unstable)" "800" "Clockspeed: 800Mhz, OPP5 (should be stable)" "600" "Clockspeed: 600MHz, OPP3 (Default Speed)" --ok-label="Select CPU Profile" )
+ fi
+
+ case $cpusel in
+ "1200")
+ echo 4 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:4/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1300/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1200/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1200/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 1200
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1,2GHz." --timeout 6
+ ;;
+
+ "1100")
+ echo 4 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:4/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1200/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1100/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1100/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 1100
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1,1GHz." --timeout 6
+ ;;
+
+ "1000")
+ echo 4 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:4/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1100/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1000/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1000/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 1000
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1GHz." --timeout 6
+ ;;
+
+ "900")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:950/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:900/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 900
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 900MHz." --timeout 6
+ ;;
+
+ "800")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 800
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 800MHz." --timeout 6
+ ;;
+
+
+ "600")
+ echo 3 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:700/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:600/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:600/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 600
+ zenity --info --title="CPU Speed set" --text "The maxmimum CPU Speed has been set to 600Mhz." --timeout 6
+ ;;
+
+esac
+
+# ----
-if zenity --question --title="Default Inteface" --text="Now you can choose whether you want to boot into a full desktop interface or a gaming console-like launcher by default.\n\nYou can always change this setting later." --ok-label="Full Desktop (Xfce)" --cancel-label="Games console like Launcher (PMenu)"; then
- echo Xfce4 > /etc/bootup.cfg
- sed -i 's/.*sessions.*/sessions xfce4,pmenu/g' /etc/slim.conf
- else
- echo PMenu > /etc/bootup.cfg
- sed -i 's/.*sessions.*/sessions pmenu,xfce4/g' /etc/slim.conf
+# NOTE: This is just a temporary fix! These daemons should be removed from startup in the OE recipes. Until the time is found, we'll do it from here.
+update-rc.d -f samba remove
+update-rc.d -f xinetd remove
+update-rc.d -f avahi-daemon remove
+update-rc.d -f apmd remove
+update-rc.d -f banner remove
+update-rc.d -f portmap remove
+update-rc.d -f mountnfs remove
+update-rc.d -f blueprobe remove
+update-rc.d -f dropbear remove
+update-rc.d -f wl1251-init remove
+# leave this one alone, needed for OTG host mode, powersaving should be ok on 3.2.39 at least
+#update-rc.d -f usb-gadget remove
+
+# prevent wifi from being autoloaded on later kernels, let wl1251-init script do it
+if ! grep -q 'blacklist wl1251_sdio' /etc/modprobe.conf 2> /dev/null; then
+ echo 'blacklist wl1251_sdio' >> /etc/modprobe.conf
+fi
+# we don't ship firmware for rtl8192cu, and it was reported not to work
+# with the right firmware anyway (not verified though)
+# vendor 8192cu is compiled instead for now
+if ! grep -q 'blacklist rtl8192cu' /etc/modprobe.conf 2> /dev/null; then
+ echo 'blacklist rtl8192cu' >> /etc/modprobe.conf
fi
-zenity --info --title="Finished" --text "This concludes the First Boot Wizard.\nThanks for buying the OpenPandora. Enjoy the device!"
+# add Midi Module and zram
+echo snd-seq>>/etc/modules
+echo zram>>/etc/modules
+
+# get rid of some dirs in /media that OE creates but are unlikely to be used
+rmdir /media/card /media/cf /media/mmc1 /media/net /media/realroot /media/union 2> /dev/null
+
+# Write the control file so this script is not run on next boot
+# (hackish I know but I want the flexability to drop a new script in later esp. in the early firmwares).
+
+touch /etc/pandora/first-boot
+# Make the control file writeable by all to allow the user to delete to rerun the wizard on next boot.
+chmod 0666 /etc/pandora/first-boot
+
+
+
+
+
+# Let the user run optional config stuff.
+
+while mainsel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="This concludes the mandatory part of the First Boot Wizard.\n\nYou can now either continue to boot the system or change some more settings.\n\n\nThank you for buying the OpenPandora. Enjoy using the device." "speed" "Advanced CPU-Speed and Overclocking-Settings" "startup" "Advanced Startup-Settings" "lcd" "LCD-Settings" --ok-label="Change selected Setting" --cancel-label="Finish Setup"); do
+
+case $mainsel in
+ "speed")
+ /usr/pandora/scripts/op_cpusettings.sh
+ ;;
+
+ "startup")
+ echo $username > /tmp/currentuser
+ /usr/pandora/scripts/op_startupmanager.sh
+ ;;
+
+ "lcd")
+ /usr/pandora/scripts/op_lcdsettings.sh
+ ;;
+
+esac
+done
+# ----
+
+rm /tmp/nocleanwarn
+# ----
+else
+poweroff
+fi
git.openpandora.org / openpandora.oe.git / blobdiff