RESET_ROOT="yes"
-DISPLAY=:0 xset s off
+xset s off
+xset -dpms
+
+#Stop WiFi
+rmmod board_omap3pandora_wifi wl1251_sdio wl1251
# Greet the user.
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
selection=""
while [ x$selection = x ]; do
-selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=310 --title="Select the Default GUI" --list --column "Name" --column "Description" --text "You can now select your preferred GUI (the GUI that will be loaded automatically on startup of the unit.\n\nYou can either select XFCE4, which is a full desktop environment (similar to a normal PC).\nOr you could select MiniMenu, which is a minimal UI similar to gaming devices.\n\nIf you select the last choice (GUISwitch), you will be prompted to choose a GUI each time you boot your Pandora.\n\nThis setting can always be changed later by running the Startup-Settings." )
+selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=310 --title="Select the Default GUI" --list --column "Name" --column "Description" --text "You can now select your preferred GUI - the GUI that will be loaded automatically on startup of the unit.\n\nYou can either select XFCE4, which is a full desktop environment (similar to a normal PC).\nOr you could select MiniMenu, which is a minimal UI similar to gaming devices.\n\nIf you select the last choice (GUISwitch), you will be prompted to choose a GUI each time you boot your Pandora.\n\nThis setting can always be changed later by running the Startup-Settings." )
if [ x$selection = x ]; then
zenity --title="Error" --error --text="Please select a GUI." --timeout=6
fi
time_h=`date +%H`
time_m=`date +%M`
-while ! time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n\nThe screen might blank out after you changed the time.\nDon't panic. Simply press a button on the keyboard.\n" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
+while ! time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
zenity --title="Error" --error --text="Please input the time." --timeout 6
done
while ! date -d $time ; do
- time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n\nThe screen might blank out after you changed the time.\nDon't panic. Simply press a button on the keyboard.\n" --entry-text "$time_h:$time_m")
+ time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n" --entry-text "$time_h:$time_m")
done
date +%Y%m%d -s $date
date +%H:%M -s $time
+hwclock -u -w
+
+
+#Let's ask the user about clockspeed
+while ! cpusel=$(zenity --title="Optional settings" --width="400" --height="350" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1100" "Clockspeed: 1,1Ghz, OPP5 (should be stable on 1GHz units)" "1000" "Clockspeed: 1GHz, OPP5 (most probably unstable on 600Mhz units)" "800" "Clockspeed: 800MHz, OPP5 (should be stable on all units)" "600" "Clockspeed: 600MHz, OPP3 (600 MHz units only)" --ok-label="Select CPU Profile" ); do
+ zenity --title="Error" --error --text="Please select your desired CPU Speed profile." --timeout=6
+done
+
+case $cpusel in
+ "1100")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1200/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1100/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1100/g" /etc/pandora/conf/cpu.conf
+ default_cpu=1100
+ ;;
+
+ "1000")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1100/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1000/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1000/g" /etc/pandora/conf/cpu.conf
+ default_cpu=1000
+ ;;
+
+ "800")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
+ default_cpu=800
+ ;;
+
+
+
+ "600")
+ echo 3 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:700/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:600/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:600/g" /etc/pandora/conf/cpu.conf
+ default_cpu=600
+ ;;
+
+esac
# ----
update-rc.d -f xinetd remove
update-rc.d -f avahi-daemon remove
update-rc.d -f apmd remove
-update-rc.d -f usb-gadget remove
update-rc.d -f banner remove
update-rc.d -f portmap remove
update-rc.d -f mountnfs remove
update-rc.d -f blueprobe remove
update-rc.d -f dropbear remove
update-rc.d -f wl1251-init remove
+# leave this one alone, needed for OTG host mode, powersaving should be ok on 3.2.39 at least
+#update-rc.d -f usb-gadget remove
+# prevent wifi from being autoloaded on later kernels, let wl1251-init script do it
+if ! grep -q 'blacklist wl1251_sdio' /etc/modprobe.conf 2> /dev/null; then
+ echo 'blacklist wl1251_sdio' >> /etc/modprobe.conf
+fi
+# we don't ship firmware for rtl8192cu, and it was reported not to work
+# with the right firmware anyway (not verified though)
+# vendor 8192cu is compiled instead for now
+if ! grep -q 'blacklist rtl8192cu' /etc/modprobe.conf 2> /dev/null; then
+ echo 'blacklist rtl8192cu' >> /etc/modprobe.conf
+fi
+
+# add Midi Module and zram
+echo snd-seq>>/etc/modules
+echo zram>>/etc/modules
+
+# get rid of some dirs in /media that OE creates but are unlikely to be used
+rmdir /media/card /media/cf /media/mmc1 /media/net /media/realroot /media/union 2> /dev/null
# Write the control file so this script is not run on next boot
# (hackish I know but I want the flexability to drop a new script in later esp. in the early firmwares).
# Make the control file writeable by all to allow the user to delete to rerun the wizard on next boot.
chmod 0666 /etc/pandora/first-boot
+if zenity --question --title="Calibrate Touchscreen" --text="It is recommended to calibrate the touchscreen to make sure it accurately works.\n\nIf you do so, you will see a moving crosshair.\nUse the stylus to press the crosshair as accurate as possible.\n\nYou can always (re-)calibrate it from the Settings-Menu later in the OS as well." --ok-label="Calibrate Touchscreen" --cancel-label="Don't calibrate it"; then
+ . /etc/profile
+ TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
+ /usr/pandora/scripts/op_touchinit.sh
+while ! zenity --question --title="Check Calibration" --text="Your new calibration setting has been applied.\n\nPlease check if the touchscreen is now working properly.\nIf not, you might want to try a recalibration.\n\n(Hint: use the nubs to press the button if the touchscreen is way off)" --ok-label="The touchscreen is fine" --cancel-label="Recalibrate"; do
+ TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
+ /usr/pandora/scripts/op_touchinit.sh
+done
+fi
+
+
# Let the user run optional config stuff.
-while mainsel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="This concludes the mandatory part of the First Boot Wizard.\n\nYou can now either continue to boot the system or change some more settings.\n\n\nThank you for buying the OpenPandora. Enjoy using the device." "speed" "CPU-Speed and Overclocking-Settings" "startup" "Startup-Settings" "lcd" "LCD-Settings" --ok-label="Change selected Setting" --cancel-label="Continue to Boot"); do
+while mainsel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="This concludes the mandatory part of the First Boot Wizard.\n\nYou can now either continue to boot the system or change some more settings.\n\n\nThank you for buying the OpenPandora. Enjoy using the device." "speed" "Advanced CPU-Speed and Overclocking-Settings" "startup" "Advanced Startup-Settings" "lcd" "LCD-Settings" --ok-label="Change selected Setting" --cancel-label="Finish Setup"); do
case $mainsel in
"speed")
esac
done
-
# ----
-
+rm /tmp/nocleanwarn
# ----
else
poweroff
-fi
\ No newline at end of file
+fi
git.openpandora.org / openpandora.oe.git / blobdiff