export WALLPAPER='/usr/share/xfce4/backdrops/op-firstrun.png'
hsetroot -center $WALLPAPER
+# Find out what unit the user has.
+pnd_version=$(dmesg | grep OMAP3 | grep ES | awk '{print $3}')
+es_version=$(dmesg | grep OMAP3 | grep ES | awk '{print $4}')
+if [ "$pnd_version" == "OMAP3630" ]; then
+ pnd_version="1GHz"
+fi
+ if [ "$pnd_version" == "OMAP3430/3530" ]; then
+ pnd_version="Rebirth"
+ if [ "$es_version" == "ES2.1" ]; then
+ pnd_version="Classic"
+ fi
+fi
+
+# Enable TV Out
+/usr/pandora/scripts/op_tvout.sh
+
# Default error message (should a user hit cancel, validation fail etc.).
ERROR_WINDOW='zenity --title="Error" --error --text="Sorry! Please try again." --timeout 6'
RESET_ROOT="yes"
+xset s off
+xset -dpms
+
+#Stop WiFi
+rmmod board_omap3pandora_wifi wl1251_sdio wl1251
+
# Greet the user.
-if zenity --question --title="Pandoras Box has been opened." --text="Welcome!\n\nPandora's Box has been opened.\n\nThis wizard will help you setting up your new OpenPandora handheld before the first use.\n\nYou will be asked a few simple questions to personalise and configure your device.\n\nDo you want to set up your unit now or shut the unit down and do it later?" --ok-label="Start now" --cancel-label="Shutdown" ; then
+if zenity --question --title="Pandoras Box has been opened." --text="Welcome!\n\nPandora's Box has been opened.\n\nThis wizard will help you setting up your $pnd_version OpenPandora handheld before the first use.\n\nYou will be asked a few simple questions to personalise and configure your device.\n\nDo you want to set up your unit now or shut the unit down and do it later?" --ok-label="Start now" --cancel-label="Shutdown" ; then
# ----
+# Calibrate touchscreen.
+
+if zenity --question --title="Calibrate Touchscreen" --text="It is recommended to calibrate the touchscreen to make sure it accurately works.\n\nIf you do so, you will see a moving crosshair.\nUse the stylus to press the crosshair as accurate as possible.\n\nYou can always (re-)calibrate it from the Settings-Menu later in the OS as well." --ok-label="Calibrate Touchscreen" --cancel-label="Don't calibrate it"; then
+ . /etc/profile
+ TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
+ /usr/pandora/scripts/op_touchinit.sh
+while ! zenity --question --title="Check Calibration" --text="Your new calibration setting has been applied.\n\nPlease check if the touchscreen is now working properly.\nIf not, you might want to try a recalibration.\n\n(Hint: use the nubs to press the button if the touchscreen is way off)" --ok-label="The touchscreen is fine" --cancel-label="Recalibrate"; do
+ TSLIB_CONSOLEDEVICE=none op_runfbapp ts_calibrate
+ /usr/pandora/scripts/op_touchinit.sh
+done
+fi
+
# Reset ROOT's password to something random
# (I know the image build sets the password to something pusdo-random)
# ----
-# Ask the user to calibrate the touchscreen.
-
-#if zenity --question --title="Touchscreen calibration" --text="It is recommended to calibrate and test the device touchscreen.\n\nDo you wish to calibrate the touchscreen now?" --ok-label="Yes" --cancel-label="No"; then
-# # Make sure we have a sane environment as this script will be run long before any /etc/profile stuff.
-# . /etc/profile.d/tslib.sh
-# # Delete the pointercal file (do we want to do that?)
-# # rm /etc/pointercal
-# # Spawn the ts_* tools as subprocesses that will return to the script.
-# echo Running ts_calibrate
-# /usr/bin/ts_calibrate
-# wait
-# echo Running ts_test
-# /usr/bin/ts_test
-# wait
-#fi
-
-# ----
-
-# Setup swap partition if the user has placed an SD with a swap partition on it.
-
-#swap_part=$(sfdisk -l /dev/mmcblk? | grep swap | cut -d" " -f1)
-#if [ x$swap_part != x ] ; then
-# use_swap=$(zenity --title="Enable swap?" --text "Swap partition found on SD card. Would you like to use it?\n\nWarning: This SD must remain in the system to use the swap." --list --radiolist --column " " --column "Answer" TRUE "Use swap on $swap_part" FALSE "Do not use swap")
-# if [ "$use_swap" = "Use swap on $swap_part" ] ; then
-# swapon $swap_part
-# echo "$swap_part none swap sw 0 0" >> /etc/fstab
-# fi
-#fi
-
-# ----
-
# Setup the full name and username.
while ! name=$(zenity --title="Please enter your full name" --entry --text "Please enter your full name.") || [ "x$name" = "x" ] ; do
zenity --title="Error" --error --text="Please try again." --timeout 6
done
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
+while ! useradd -c "$name,,," -G adm,audio,cdrom,netdev,plugdev,users,video,wheel,dialout "$username" ; do
username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
done
echo $hostname > /etc/hostname
-sed 's/ /_/g' /etc/hostname
+hostname=$(sed 's/ /_/g' /etc/hostname)
+echo $hostname > /etc/hostname
echo "127.0.0.1 localhost.localdomain localhost $hostname" > /etc/hosts
hostname -F /etc/hostname
# Set the correct user for Autologin and enable / disable it.
-if zenity --question --title="Autologin" --text="Do you wish to automatically login at startup?\n\nSecurity warning: This skips the password check on startup" --ok-label="Yes" --cancel-label="No"; then
+if zenity --question --title="Autologin" --text="If you like, you can setup your Pandora to autologin into the system at startup.\nWhile this is more convenient for most users, it features a potential security issue, as no password will be needed to access your desktop and personal files.\n\nDo you wish to automatically login at startup?" --ok-label="Yes" --cancel-label="No"; then
# echo "PREFERED_USER=$username" > /etc/default/autologin
sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
sed -i 's/.*auto_login.*/auto_login yes/g' /etc/slim.conf
# Select the default interface and setup SLiM to pass that as a sesion to ~./.xinitrc
-while ! selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=300 --title="Select the Default GUI" --list --column "Name" --column "Description" --text "Please select the Default GUI" ); do
+selection=""
+while [ x$selection = x ]; do
+selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=310 --title="Select the Default GUI" --list --column "Name" --column "Description" --text "You can now select your preferred GUI - the GUI that will be loaded automatically on startup of the unit.\n\nYou can either select XFCE4, which is a full desktop environment (similar to a normal PC).\nOr you could select MiniMenu, which is a minimal UI similar to gaming devices.\n\nIf you select the last choice (GUISwitch), you will be prompted to choose a GUI each time you boot your Pandora.\n\nThis setting can always be changed later by running the Startup-Settings." )
+if [ x$selection = x ]; then
zenity --title="Error" --error --text="Please select a GUI." --timeout=6
+fi
done
echo $selection
if [ $gui ]; then
sed -i "s/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=$gui/g" /home/$username/.xinitrc
echo $selection selected as default interface
- zenity --info --title="Selected session" --text "You selected $selection as default setting. You can always change your default GUI later." --timeout 6
+ zenity --info --title="Selected session" --text "You selected $selection as default setting." --timeout 6
else
sed -i 's/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=startxfce4/g' /home/$username/.xinitrc
fi
# Set the timezone and date/time
-while ! timezone=$(zenity --list --title "Select your timezone" --text="Please select your timezone" --column="Select your timezone" --print-column=1 "GMT (London, Lisbon, Portugal, Casablanca, Morocco)" "GMT+1 (Paris, Berlin, Amsterdam, Bern, Stockholm)" "GMT+2 (Athens, Helsinki, Istanbul)" "GMT+3 (Kuwait, Nairobi, Riyadh, Moscow)" "GMT+4 (Abu Dhabi, Iraq, Muscat, Kabul)" "GMT+5 (Calcutta, Colombo, Islamabad, Madras, New Delhi)" "GMT+6 (Almaty, Dhakar, Kathmandu)" "GMT+7 (Bangkok, Hanoi, Jakarta)" "GMT+8 (Beijing, Hong Kong, Kuala Lumpar, Singapore, Taipei)" "GMT+9 (Osaka, Seoul, Sapporo, Tokyo, Yakutsk)" "GMT+10 (Brisbane, Melbourne, Sydney, Vladivostok)" "GMT+11 (Magadan, New Caledonia, Solomon Is)" "GMT+12 (Auckland, Fiji, Kamchatka, Marshall Is., Wellington, Suva)" "GMT-1 (Azores, Cape Verde Is.)" "GMT-2 (Mid-Atlantic)" "GMT-3 (Brasilia, Buenos Aires, Georgetown)" "GMT-4 (Atlantic Time, Caracas)" "GMT-5 (Bogota, Lima, New York)" "GMT-6 (Mexico City, Saskatchewan, Chicago, Guatamala)" "GMT-7 (Denver, Edmonton, Mountain Time, Phoenix, Salt Lake City)" "GMT-8 (Anchorage, Los Angeles, San Francisco, Seattle)" "GMT-9 (Alaska)" "GMT-10 (Hawaii, Honolulu)" "GMT-11 (Midway Island, Samoa)" "GMT-12 (Eniwetok, Kwaialein)" "UTC" "Universal" --width=500 --height=450) || [ "x$timezone" = "x" ] ; do
- zenity --title="Error" --error --text="Please select a timezone." --timeout=6
+while [ "x$timezone" = "x" ]; do
+
+ while ! area=$(zenity --list --title "Select your time zone" --text="Please select your area" --column="Select your area" --print-column=1 "Africa" "America" "Asia" "Australia" "Europe" "Pacific" --width=500 --height=260) || [ "x$area" = "x" ] ; do
+ zenity --title="Error" --error --text="Please select your area." --timeout=6
+ done
+
+ timezone=$(ls -1 /usr/share/zoneinfo/$area | zenity ---width=500 --height=200 --title="Select your closest location" --list --column "Closest Location" --text "Please select the location closest to you")
+
done
-timezone=`echo $timezone | sed 's/(.*)//g'`
+
echo $timezone
-echo rm /etc/localtime && ln -s /usr/share/zoneinfo/Etc/$timezone /etc/localtime
+rm /etc/localtime && ln -s /usr/share/zoneinfo/$area/$timezone /etc/localtime
+echo "$area/$timezone" > /etc/timezone
#Make sure we clean up any leading zeros in the day (as Zenity freaks out)
date_d=`date +%d | sed 's/^0//'`
-date_m=`date +%m`
+date_m=`date +%m | sed 's/^0//'`
date_y=`date +%Y`
while ! date=$(zenity --calendar --text="Please select the current date" --title "Please select the current date" --day=$date_d --month=$date_m --year=$date_y --date-format="%Y%m%d" --width=500) || [ "x$date" = "x" ] ; do
time_h=`date +%H`
time_m=`date +%M`
-while ! time=$(zenity --title="Enter actual time" --entry --text "Please enter the time in 24hour format (HH:MM):" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
+while ! time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
zenity --title="Error" --error --text="Please input the time." --timeout 6
done
while ! date -d $time ; do
- time=$(zenity --title="Enter actual time" --entry --text "Please enter the time in 24hour format (HH:MM):" --entry-text "$time_h:$time_m")
+ time=$(zenity --title="Enter current time" --entry --text "Please enter the time in 24hour format (HH:MM).\n" --entry-text "$time_h:$time_m")
done
date +%Y%m%d -s $date
date +%H:%M -s $time
-
-# ----
-
-# Finsh up and boot the system.
-
-zenity --info --title="Finished" --text "This concludes the First Boot Wizard.\n\nYour chosen interface will start in a few seconds\n\nThankyou for buying the OpenPandora. Enjoy using the device!" --timeout 6
+hwclock -u -w
+
+
+# Let the user choose his desired clockspeed.
+
+if [ "$pnd_version" == "1GHz" ]; then
+ cpusel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1200" "Clockspeed: 1,2GHz, OPP4 (probably unstable)" "1100" "Clockspeed: 1,1GHz, OPP4 (should be stable)" "1000" "Clockspeed: 1GHz, OPP4 (Default Speed)" --ok-label="Select CPU Profile" )
+ else
+ cpusel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "900" "Clockspeed: 900MHz, OPP5 (probably unstable)" "800" "Clockspeed: 800MHz, OPP5 (should be stable)" "600" "Clockspeed: 600MHz, OPP3 (Default Speed)" --ok-label="Select CPU Profile" )
+ fi
+
+ case $cpusel in
+ "1200")
+ echo 4 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:4/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1300/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1200/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1200/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 1200
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1,2GHz." --timeout 6
+ ;;
+
+ "1100")
+ echo 4 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:4/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1200/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1100/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1100/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 1100
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1,1GHz." --timeout 6
+ ;;
+
+ "1000")
+ echo 4 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:4/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:1100/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:1000/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:1000/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 1000
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1GHz." --timeout 6
+ ;;
+
+ "900")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:950/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:900/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 900
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 900MHz." --timeout 6
+ ;;
+
+ "800")
+ echo 5 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:900/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 800
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 800MHz." --timeout 6
+ ;;
+
+
+ "600")
+ echo 3 > /proc/pandora/cpu_opp_max
+ sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*max:.*/max:700/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*default.*/default:600/g" /etc/pandora/conf/cpu.conf
+ sed -i "s/.*safe.*/safe:600/g" /etc/pandora/conf/cpu.conf
+ sync
+ /usr/pandora/scripts/op_cpuspeed.sh -n 600
+ zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 600MHz." --timeout 6
+ ;;
+
+esac
+
+#Enable / Disable TV Out on Startup
+
+if zenity --question --title="TV Out on startup" --text="Do you want to enable the TV Output on startup?\n(Note: This needs a bit more power)" --ok-label="Enable TV Out" --cancel-label="Disable TV Out"; then
+ touch /etc/pandora/conf/tvout.state
+ zenity --info --title="TV Out" --text "TV Out will be switched on with the last saved settings on bootup." --timeout 6
+ else
+ /usr/pandora/scripts/op_tvout.sh -d
+ if [ -f /etc/pandora/conf/tvout.state ]; then
+ rm /etc/pandora/conf/tvout.state
+ fi
+ zenity --info --title="TV Out" --text "TV Out will not be switched on on bootup." --timeout 6
+fi
# ----
update-rc.d -f xinetd remove
update-rc.d -f avahi-daemon remove
update-rc.d -f apmd remove
-update-rc.d -f usb-gadget remove
update-rc.d -f banner remove
update-rc.d -f portmap remove
update-rc.d -f mountnfs remove
update-rc.d -f blueprobe remove
update-rc.d -f dropbear remove
update-rc.d -f wl1251-init remove
+# leave this one alone, needed for OTG host mode, powersaving should be ok on 3.2.39 at least
+#update-rc.d -f usb-gadget remove
+# prevent wifi from being autoloaded on later kernels, let wl1251-init script do it
+if ! grep -q 'blacklist wl1251_sdio' /etc/modprobe.conf 2> /dev/null; then
+ echo 'blacklist wl1251_sdio' >> /etc/modprobe.conf
+fi
+# we don't ship firmware for rtl8192cu, and it was reported not to work
+# with the right firmware anyway (not verified though)
+# vendor 8192cu is compiled instead for now
+if ! grep -q 'blacklist rtl8192cu' /etc/modprobe.conf 2> /dev/null; then
+ echo 'blacklist rtl8192cu' >> /etc/modprobe.conf
+fi
+
+# add Midi module - handled in pandora-skel.bb
+# echo snd-seq > /etc/modutils/snd-seq
+# zram doesn't seem to help, disabled
+# echo zram > /etc/modutils/zram
+
+# get rid of some dirs in /media that OE creates but are unlikely to be used
+rmdir /media/card /media/cf /media/mmc1 /media/net /media/realroot /media/union 2> /dev/null
# Write the control file so this script is not run on next boot
# (hackish I know but I want the flexability to drop a new script in later esp. in the early firmwares).
# Make the control file writeable by all to allow the user to delete to rerun the wizard on next boot.
chmod 0666 /etc/pandora/first-boot
+
+
+
+
+# Let the user run optional config stuff.
+
+while mainsel=$(zenity --title="Optional settings" --width="400" --height="300" --list --column "id" --column "Please select" --hide-column=1 --text="This concludes the mandatory part of the First Boot Wizard.\n\nYou can now either continue to boot the system or change some more settings.\n\n\nThank you for buying the OpenPandora. Enjoy using the device." "speed" "Advanced CPU-Speed and Overclocking-Settings" "startup" "Advanced Startup-Settings" "video" "Video Settings" --ok-label="Change selected Setting" --cancel-label="Finish Setup"); do
+
+case $mainsel in
+ "speed")
+ /usr/pandora/scripts/op_cpusettings.sh
+ ;;
+
+ "startup")
+ echo $username > /tmp/currentuser
+ /usr/pandora/scripts/op_startupmanager.sh
+ ;;
+
+ "video")
+ /usr/pandora/scripts/op_lcdsettings.sh
+ ;;
+
+esac
+done
+# ----
+
+rm /tmp/nocleanwarn
# ----
else
poweroff
-fi
\ No newline at end of file
+fi
git.openpandora.org / openpandora.oe.git / blobdiff