2 # Released under the GPL
3 # CPU-Settings, v1.1, written by Michael Mrozek aka EvilDragon 2011.
4 # This scripts allows you to change Pandora CPU-Settings.
6 while mainsel=$(zenity --title="CPU-Settings" --width="400" --height="380" --list --column "id" --column "Please select" --hide-column=1 --text="Welcome to the CPU-Settings.\nHere, you can configure the behaviour of your CPU \nThis can make your Pandora run faster but also more unstable.\n\nDon't worry though, you cannot permanently damage your unit.\n\nWhat do you want to do?\n" "profile" "Quick-Setup: Select from different profiles" "opp" "Set the max allowed OPP level" "mhz" "Set the maximum allowed MHz" "warning" "Change warning settings" "defaultmhz" "Set the default maximum MHz" --ok-label="Change Setting" --cancel-label="Exit"); do
11 cpusel=$(zenity --title="Optional settings" --width="400" --height="350" --list --column "id" --column "Please select" --hide-column=1 --text="The CPU of the Pandora supports different speed settings.\nHigher speeds might make some units unstable and decrease the lifetime of your CPU.\n\nBelow are some quick profiles which will help you to configure your system the way you like it.\n" "1100" "Clockspeed: 1,1Ghz, OPP5 (should be stable on 1GHz units)" "1000" "Clockspeed: 1GHz, OPP5 (most probably unstable on 600Mhz units)" "800" "Clockspeed: 800MHz, OPP5 (should be stable on all units)" "600" "Clockspeed: 600MHz, OPP3 (600 MHz units only)" --ok-label="Select CPU Profile" )
15 echo 5 > /proc/pandora/cpu_opp_max
16 sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
17 sed -i "s/.*max:.*/max:1200/g" /etc/pandora/conf/cpu.conf
18 sed -i "s/.*default.*/default:1100/g" /etc/pandora/conf/cpu.conf
19 sed -i "s/.*safe.*/safe:1100/g" /etc/pandora/conf/cpu.conf
20 /usr/pandora/scripts/op_cpuspeed.sh -n 1100
21 zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1,1GHz." --timeout 6
25 echo 5 > /proc/pandora/cpu_opp_max
26 sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
27 sed -i "s/.*max:.*/max:1100/g" /etc/pandora/conf/cpu.conf
28 sed -i "s/.*default.*/default:1000/g" /etc/pandora/conf/cpu.conf
29 sed -i "s/.*safe.*/safe:1000/g" /etc/pandora/conf/cpu.conf
30 /usr/pandora/scripts/op_cpuspeed.sh -n 1000
31 zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 1GHz." --timeout 6
35 echo 5 > /proc/pandora/cpu_opp_max
36 sed -i "s/.*maxopp.*/maxopp:5/g" /etc/pandora/conf/cpu.conf
37 sed -i "s/.*max:.*/max:900/g" /etc/pandora/conf/cpu.conf
38 sed -i "s/.*default.*/default:800/g" /etc/pandora/conf/cpu.conf
39 sed -i "s/.*safe.*/safe:800/g" /etc/pandora/conf/cpu.conf
40 /usr/pandora/scripts/op_cpuspeed.sh -n 800
41 zenity --info --title="CPU Speed set" --text "The maximum CPU Speed has been set to 800MHz." --timeout 6
46 echo 3 > /proc/pandora/cpu_opp_max
47 sed -i "s/.*maxopp.*/maxopp:3/g" /etc/pandora/conf/cpu.conf
48 sed -i "s/.*max:.*/max:700/g" /etc/pandora/conf/cpu.conf
49 sed -i "s/.*default.*/default:600/g" /etc/pandora/conf/cpu.conf
50 sed -i "s/.*safe.*/safe:600/g" /etc/pandora/conf/cpu.conf
51 /usr/pandora/scripts/op_cpuspeed.sh -n 600
52 zenity --info --title="CPU Speed set" --text "The maxmimum CPU Speed has been set to 600Mhz." --timeout 6
59 opp="$(cat /etc/pandora/conf/cpu.conf | grep opp | awk -F\: '{print $2}')"
60 if zenity --question --title="OPP Setting Info" --text="WARNING!\n\nIncreasing the maximum allowed OPP will allow you to overclock to higher values.\n\nHowever, besides using more power, it ALSO DECREASES THE LIFETIME OF YOUR CPU!" --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
61 if newopp=$(zenity --scale --text "Set the maximum allowed OPP" --min-value=3 --max-value=5 --value=$opp --step 1); then
62 echo $newopp > /proc/pandora/cpu_opp_max
63 sed -i "s/.*maxopp.*/maxopp:$newopp/g" /etc/pandora/conf/cpu.conf
64 zenity --info --title="OPP Set" --text "The maximum allowed OPP value has been set to $newopp." --timeout 6
66 zenity --info --title="No change" --text "The maximum OPP value has not been changed." --timeout 6
71 min="$(cat /etc/pandora/conf/cpu.conf | grep min | awk -F\: '{print $2}')"
72 max="$(cat /etc/pandora/conf/cpu.conf | grep max: | awk -F\: '{print $2}')"
73 defspeed="$(cat /etc/pandora/conf/cpu.conf | grep default | awk -F\: '{print $2}')"
74 if zenity --question --title="MHz Setting Info" --text="This setting can set the allowed range apps can use on your Pandora.\n\nToo high CPU settings can render your Pandora unstable and crash it. This can lead to data loss!\n\nBe absolutely sure you know what you are doing here.\n\n" --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
75 if newmax=$(zenity --scale --text "Set the maximum allowed MHz" --min-value=500 --max-value=1300 --value=$max --step 1); then
76 sed -i "s/.*max:.*/max:$newmax/g" /etc/pandora/conf/cpu.conf
77 if [ "$defspeed" -gt "$newmax" ]; then
78 sed -i "s/.*default.*/default:$newmax/g" /etc/pandora/conf/cpu.conf
79 zenity --info --title="Default speed info" --text "As your default speed was set higher than your new maximum, it has been changed to the new maximum speed." --timeout 6
80 /usr/pandora/scripts/op_cpuspeed.sh -n $newmax
82 zenity --info --title="MHz range set" --text "The maximum allowed CPU Speed of your Pandora is now $newmax MHz.\n\n" --timeout 6
84 zenity --info --title="No change" --text "The CPU Speed has not been changed." --timeout 6
89 warn="$(cat /etc/pandora/conf/cpu.conf | grep warn | awk -F\: '{print $2}')"
90 safe="$(cat /etc/pandora/conf/cpu.conf | grep safe | awk -F\: '{print $2}')"
91 min="$(cat /etc/pandora/conf/cpu.conf | grep min | awk -F\: '{print $2}')"
92 max="$(cat /etc/pandora/conf/cpu.conf | grep max: | awk -F\: '{print $2}')"
93 if zenity --question --title="Warning Setting Info" --text="The Pandora can display a warning if you try to overclock.\n\nYou can either select at what speed the warning should appear or disable it completely.\n\nBe absolutely sure you know what you are doing here.\n\nThe standard setting is 600MHz." --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
94 if zenity --question --title="Disable Warning?" --text="Do you want to enable or disable the warning?" --ok-label="Enable it" --cancel-label="Disable it"; then
95 if newsafe=$(zenity --scale --text "At what speed should the warning appear?" --min-value=$min --max-value=$max --value=$safe --step 1); then
96 sed -i "s/.*warn.*/warn:yes/g" /etc/pandora/conf/cpu.conf
97 sed -i "s/.*safe.*/safe:$newsafe/g" /etc/pandora/conf/cpu.conf
98 zenity --info --title="Warning enabled" --text "Your Pandora will warn you if you try to clock higher than $newsafe MHz." --timeout 6
100 sed -i "s/.*warn.*/warn:yes/g" /etc/pandora/conf/cpu.conf
101 zenity --info --title="No change" --text "The speed the warning will appear has not been changed and the warning has been enabled." --timeout 6
104 sed -i "s/.*warn.*/warn:no/g" /etc/pandora/conf/cpu.conf
105 zenity --info --title="Warning" --text "Your Pandora will NOT warn you if you try to overclock!" --timeout 6
110 defspeed="$(cat /etc/pandora/conf/cpu.conf | grep default | awk -F\: '{print $2}')"
111 min="$(cat /etc/pandora/conf/cpu.conf | grep min | awk -F\: '{print $2}')"
112 max="$(cat /etc/pandora/conf/cpu.conf | grep max: | awk -F\: '{print $2}')"
113 if zenity --question --title="Default CPU Speed" --text="WARNING!\n\nYou are about to change the default clockspeed your Pandora will be running when you start it.\nIf it is set too high, the Pandora will crash.\n\nIf that happens, the Pandora will NOT change the clockspeed on the next boot, so you can access the OS and fix the default clock speed.\n\nHowever, each crash can lead to data loss - so please be sure to absolutely know what you're doing!" --ok-label="Yes, I know what I'm doing!" --cancel-label="I'm scared!"; then
114 if newdefault=$(zenity --scale --text "Set the default CPU speed" --min-value=$min --max-value=$max --value=$defspeed --step 1); then
115 /usr/pandora/scripts/op_cpuspeed.sh -n $newdefault
116 sed -i "s/.*default.*/default:$newdefault/g" /etc/pandora/conf/cpu.conf
117 zenity --info --title="Default speed set" --text "The default clock speed has been set to $newdefault." --timeout 6
119 zenity --info --title="No change" --text "The default CPU speed has not been changed." --timeout 6