From d7880f10c5d42ba182a97c1fd41d41d0b8837097 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 18 Jun 2009 00:40:16 -0300 Subject: [PATCH] thinkpad-acpi: forbid the use of HBRV on Lenovo ThinkPads Forcing thinkpad-acpi to do EC-based brightness control (HBRV) on a X61 has very... interesting effects, instead of doing nothing (since it doesn't have EC-based backlight control), it causes "weirdness" in the fan tachometer readings, for example. This means the EC register that used to be HBRV has been reused by Lenovo for something else, but they didn't remove it from the DSDT. Make sure the documentation reflects this data, and forbid the user from forcing the driver to access HBRV on Lenovo ThinkPads. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 14 ++++++++------ drivers/platform/x86/thinkpad_acpi.c | 10 ++++++++++ 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 88fc0661de56..f2ff638cce8d 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1169,17 +1169,19 @@ may not be distinct. Later Lenovo models that implement the ACPI display backlight brightness control methods have 16 levels, ranging from 0 to 15. -There are two interfaces to the firmware for direct brightness control, -EC and UCMS (or CMOS). To select which one should be used, use the -brightness_mode module parameter: brightness_mode=1 selects EC mode, -brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC -mode with NVRAM backing (so that brightness changes are remembered -across shutdown/reboot). +For IBM ThinkPads, there are two interfaces to the firmware for direct +brightness control, EC and UCMS (or CMOS). To select which one should be +used, use the brightness_mode module parameter: brightness_mode=1 selects +EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC +mode with NVRAM backing (so that brightness changes are remembered across +shutdown/reboot). The driver tries to select which interface to use from a table of defaults for each ThinkPad model. If it makes a wrong choice, please report this as a bug, so that we can fix it. +Lenovo ThinkPads only support brightness_mode=2 (UCMS). + When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct ThinkPad-specific interface. The driver will disable its native diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 5a22a064222c..c8d74dbacbbd 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -5696,6 +5696,10 @@ static struct ibm_struct ecdump_driver_data = { * Bit 3-0: backlight brightness level * * brightness_get_raw returns status data in the HBRV layout + * + * WARNING: The X61 has been verified to use HBRV for something else, so + * this should be used _only_ on IBM ThinkPads, and maybe with some careful + * testing on the very early *60 Lenovo models... */ enum { @@ -5996,6 +6000,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm) brightness_mode); } + /* Safety */ + if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM && + (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM || + brightness_mode == TPACPI_BRGHT_MODE_EC)) + return -EINVAL; + if (tpacpi_brightness_get_raw(&b) < 0) return 1; -- 2.39.2