From 859ae7f01237dfb024951a759087790e4d4232e1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 21 May 2014 13:08:18 -0300 Subject: [PATCH] [media] xc5000: get rid of positive error codes Errors should also be negative and should follow the Kernel standards. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/tuners/xc5000.c | 104 ++++++++++++++++------------------ 1 file changed, 48 insertions(+), 56 deletions(-) diff --git a/drivers/media/tuners/xc5000.c b/drivers/media/tuners/xc5000.c index 5cd09a681b6a..94278cc5f3ef 100644 --- a/drivers/media/tuners/xc5000.c +++ b/drivers/media/tuners/xc5000.c @@ -75,13 +75,6 @@ struct xc5000_priv { #define XC_RF_MODE_AIR 0 #define XC_RF_MODE_CABLE 1 -/* Result codes */ -#define XC_RESULT_SUCCESS 0 -#define XC_RESULT_RESET_FAILURE 1 -#define XC_RESULT_I2C_WRITE_FAILURE 2 -#define XC_RESULT_I2C_READ_FAILURE 3 -#define XC_RESULT_OUT_OF_RANGE 5 - /* Product id */ #define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000 #define XC_PRODUCT_ID_FW_LOADED 0x1388 @@ -258,9 +251,9 @@ static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len); - return XC_RESULT_I2C_WRITE_FAILURE; + return -EREMOTEIO; } - return XC_RESULT_SUCCESS; + return 0; } #if 0 @@ -297,7 +290,7 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) } *val = (bval[0] << 8) | bval[1]; - return XC_RESULT_SUCCESS; + return 0; } static void xc_wait(int wait_ms) @@ -320,13 +313,13 @@ static int xc5000_TunerReset(struct dvb_frontend *fe) XC5000_TUNER_RESET, 0); if (ret) { printk(KERN_ERR "xc5000: reset failed\n"); - return XC_RESULT_RESET_FAILURE; + return ret; } } else { printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n"); - return XC_RESULT_RESET_FAILURE; + return -EINVAL; } - return XC_RESULT_SUCCESS; + return 0; } static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) @@ -340,11 +333,11 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) buf[2] = (i2cData >> 8) & 0xFF; buf[3] = i2cData & 0xFF; result = xc_send_i2c_data(priv, buf, 4); - if (result == XC_RESULT_SUCCESS) { + if (result == 0) { /* wait for busy flag to clear */ - while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) { + while ((WatchDogTimer > 0) && (result == 0)) { result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf); - if (result == XC_RESULT_SUCCESS) { + if (result == 0) { if ((buf[0] == 0) && (buf[1] == 0)) { /* busy flag cleared */ break; @@ -356,7 +349,7 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) } } if (WatchDogTimer <= 0) - result = XC_RESULT_I2C_WRITE_FAILURE; + result = -EREMOTEIO; return result; } @@ -377,7 +370,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) /* RESET command */ result = xc5000_TunerReset(fe); index += 2; - if (result != XC_RESULT_SUCCESS) + if (result != 0) return result; } else if (len & 0x8000) { /* WAIT command */ @@ -404,7 +397,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) result = xc_send_i2c_data(priv, buf, nbytes_to_send); - if (result != XC_RESULT_SUCCESS) + if (result != 0) return result; pos += nbytes_to_send - 2; @@ -412,7 +405,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) index += len; } } - return XC_RESULT_SUCCESS; + return 0; } static int xc_initialize(struct xc5000_priv *priv) @@ -437,7 +430,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, } ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode); - if (ret == XC_RESULT_SUCCESS) + if (ret == 0) ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode); return ret; @@ -467,7 +460,7 @@ static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || (freq_hz < xc5000_tuner_ops.info.frequency_min)) - return XC_RESULT_OUT_OF_RANGE; + return -EINVAL; freq_code = (u16)(freq_hz / 15625); @@ -500,7 +493,7 @@ static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) u32 tmp; result = xc5000_readreg(priv, XREG_FREQ_ERROR, ®Data); - if (result != XC_RESULT_SUCCESS) + if (result != 0) return result; tmp = (u32)regData; @@ -521,7 +514,7 @@ static int xc_get_version(struct xc5000_priv *priv, int result; result = xc5000_readreg(priv, XREG_VERSION, &data); - if (result != XC_RESULT_SUCCESS) + if (result != 0) return result; (*hw_majorversion) = (data >> 12) & 0x0F; @@ -543,7 +536,7 @@ static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz) int result; result = xc5000_readreg(priv, XREG_HSYNC_FREQ, ®Data); - if (result != XC_RESULT_SUCCESS) + if (result != 0) return result; (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100; @@ -593,7 +586,7 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) dprintk(1, "%s(%u)\n", __func__, freq_hz); - if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) + if (xc_set_RF_frequency(priv, freq_hz) != 0) return 0; if (mode == XC_TUNE_ANALOG) { @@ -607,7 +600,7 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) static int xc_set_xtal(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; - int ret = XC_RESULT_SUCCESS; + int ret = 0; switch (priv->chip_id) { default: @@ -649,23 +642,22 @@ static int xc5000_fwupload(struct dvb_frontend *fe) priv->i2c_props.adap->dev.parent); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); - ret = XC_RESULT_RESET_FAILURE; goto out; } else { printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n", fw->size); - ret = XC_RESULT_SUCCESS; + ret = 0; } if (fw->size != desired_fw->size) { printk(KERN_ERR "xc5000: firmware incorrect size\n"); - ret = XC_RESULT_RESET_FAILURE; + ret = -EINVAL; } else { printk(KERN_INFO "xc5000: firmware uploading...\n"); ret = xc_load_i2c_sequence(fe, fw->data); - if (XC_RESULT_SUCCESS == ret) + if (0 == ret) ret = xc_set_xtal(fe); - if (XC_RESULT_SUCCESS == ret) + if (0 == ret) printk(KERN_INFO "xc5000: firmware upload complete...\n"); else printk(KERN_ERR "xc5000: firmware upload failed...\n"); @@ -744,7 +736,7 @@ static int xc5000_set_params(struct dvb_frontend *fe) u32 freq = fe->dtv_property_cache.frequency; u32 delsys = fe->dtv_property_cache.delivery_system; - if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) { + if (xc_load_fw_and_init_tuner(fe, 0) != 0) { dprintk(1, "Unable to load firmware and init tuner\n"); return -EINVAL; } @@ -821,7 +813,7 @@ static int xc5000_set_params(struct dvb_frontend *fe) __func__, freq, priv->freq_hz); ret = xc_SetSignalSource(priv, priv->rf_mode); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_SetSignalSource(%d) failed\n", priv->rf_mode); @@ -831,13 +823,13 @@ static int xc5000_set_params(struct dvb_frontend *fe) ret = xc_SetTVStandard(priv, XC5000_Standard[priv->video_standard].VideoMode, XC5000_Standard[priv->video_standard].AudioMode, 0); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); return -EREMOTEIO; } ret = xc_set_IF_frequency(priv, priv->if_khz); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", priv->if_khz); return -EIO; @@ -862,15 +854,15 @@ static int xc5000_is_firmware_loaded(struct dvb_frontend *fe) u16 id; ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id); - if (ret == XC_RESULT_SUCCESS) { + if (ret == 0) { if (id == XC_PRODUCT_ID_FW_NOT_LOADED) - ret = XC_RESULT_RESET_FAILURE; + ret = -ENOENT; else - ret = XC_RESULT_SUCCESS; + ret = 0; } dprintk(1, "%s() returns %s id = 0x%x\n", __func__, - ret == XC_RESULT_SUCCESS ? "True" : "False", id); + ret == 0 ? "True" : "False", id); return ret; } @@ -937,7 +929,7 @@ static int xc5000_set_tv_freq(struct dvb_frontend *fe, tune_channel: ret = xc_SetSignalSource(priv, priv->rf_mode); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_SetSignalSource(%d) failed\n", priv->rf_mode); @@ -947,7 +939,7 @@ tune_channel: ret = xc_SetTVStandard(priv, XC5000_Standard[priv->video_standard].VideoMode, XC5000_Standard[priv->video_standard].AudioMode, 0); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); return -EREMOTEIO; } @@ -966,7 +958,7 @@ tune_channel: /* PLL is unlocked, force reload of the firmware */ dprintk(1, "xc5000: PLL not locked (0x%x). Reloading...\n", pll_lock_status); - if (xc_load_fw_and_init_tuner(fe, 1) != XC_RESULT_SUCCESS) { + if (xc_load_fw_and_init_tuner(fe, 1) != 0) { printk(KERN_ERR "xc5000: Unable to reload fw\n"); return -EREMOTEIO; } @@ -1011,13 +1003,13 @@ static int xc5000_set_radio_freq(struct dvb_frontend *fe, ret = xc_SetTVStandard(priv, XC5000_Standard[radio_input].VideoMode, XC5000_Standard[radio_input].AudioMode, radio_input); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); return -EREMOTEIO; } ret = xc_SetSignalSource(priv, priv->rf_mode); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: xc_SetSignalSource(%d) failed\n", priv->rf_mode); @@ -1044,7 +1036,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, if (priv->i2c_props.adap == NULL) return -EINVAL; - if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) { + if (xc_load_fw_and_init_tuner(fe, 0) != 0) { dprintk(1, "Unable to load firmware and init tuner\n"); return -EINVAL; } @@ -1105,23 +1097,23 @@ static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force) { struct xc5000_priv *priv = fe->tuner_priv; - int ret = XC_RESULT_SUCCESS; + int ret = 0; u16 pll_lock_status; u16 fw_ck; - if (force || xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { + if (force || xc5000_is_firmware_loaded(fe) != 0) { fw_retry: ret = xc5000_fwupload(fe); - if (ret != XC_RESULT_SUCCESS) + if (ret != 0) return ret; msleep(20); if (priv->fw_checksum_supported) { if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck) - != XC_RESULT_SUCCESS) { + != 0) { dprintk(1, "%s() FW checksum reading failed.\n", __func__); goto fw_retry; @@ -1137,7 +1129,7 @@ fw_retry: /* Start the tuner self-calibration process */ ret |= xc_initialize(priv); - if (ret != XC_RESULT_SUCCESS) + if (ret != 0) goto fw_retry; /* Wait for calibration to complete. @@ -1148,7 +1140,7 @@ fw_retry: xc_wait(100); if (priv->init_status_supported) { - if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != XC_RESULT_SUCCESS) { + if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck) != 0) { dprintk(1, "%s() FW failed reading init status.\n", __func__); goto fw_retry; @@ -1191,13 +1183,13 @@ static int xc5000_sleep(struct dvb_frontend *fe) was removed in newer versions of the firmware. The "supported" way to sleep the tuner is to pull the reset pin low for 10ms */ ret = xc5000_TunerReset(fe); - if (ret != XC_RESULT_SUCCESS) { + if (ret != 0) { printk(KERN_ERR "xc5000: %s() unable to shutdown tuner\n", __func__); return -EREMOTEIO; } else - return XC_RESULT_SUCCESS; + return 0; } static int xc5000_init(struct dvb_frontend *fe) @@ -1205,7 +1197,7 @@ static int xc5000_init(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; dprintk(1, "%s()\n", __func__); - if (xc_load_fw_and_init_tuner(fe, 0) != XC_RESULT_SUCCESS) { + if (xc_load_fw_and_init_tuner(fe, 0) != 0) { printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); return -EREMOTEIO; } @@ -1327,7 +1319,7 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ - if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS) + if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) goto fail; switch (id) { -- 2.39.2