From 58d39bbd773965404cd8cc41ebb94488b48ac1a4 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Wed, 30 Jul 2025 23:52:45 +0000 Subject: [PATCH] rockchip: rk3528: Disable USB3OTG U3 port early The RK3528 SoC comes with USB OTG support using a DWC3 controller with a USB2 PHY and a USB3 PHY (COMBPHY). Some board designs may not use the COMBPHY for USB3 purpose. For these board to use USB OTG the input clock source must change to use UTMI clk instead of PIPE clk. Change to always disable the USB3OTG U3 port early and leave it to the COMBPHY driver to re-enable the U3 port when a usb3-phy is described in the board device tree. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- arch/arm/mach-rockchip/rk3528/rk3528.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-rockchip/rk3528/rk3528.c b/arch/arm/mach-rockchip/rk3528/rk3528.c index 4892ff6ba9d..f9bfc445b85 100644 --- a/arch/arm/mach-rockchip/rk3528/rk3528.c +++ b/arch/arm/mach-rockchip/rk3528/rk3528.c @@ -9,6 +9,9 @@ #include #include +#define VPU_GRF_BASE 0xff340000 +#define USB3OTG_CON1 0x44 + #define FIREWALL_DDR_BASE 0xff2e0000 #define FW_DDR_MST6_REG 0x58 #define FW_DDR_MST7_REG 0x5c @@ -69,6 +72,9 @@ int arch_cpu_init(void) val = readl(FIREWALL_DDR_BASE + FW_DDR_MST16_REG); writel(val & 0xffff0000, FIREWALL_DDR_BASE + FW_DDR_MST16_REG); + /* Disable USB3OTG U3 port, later enabled in COMBPHY driver */ + writel(0xffff0181, VPU_GRF_BASE + USB3OTG_CON1); + return 0; } -- 2.47.3