From 005cbdfc29cfc23b8faadd3619eed43e6550bfc1 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 21 Nov 2008 16:49:10 -0800 Subject: [PATCH] e1000e: disable correctable errors for quad ports while going to D3 There has been an issue seen with the pci-e quad port adapters that will cause them to generate a pci-e correctable error on some system while transitioning to D3. Since no action is needed on this correctable error the simplest solution is to mask off the reporting of correctable errors. Signed-off-by: Alexander Duyck Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index cc0502bbb9ff..ebbb9f061c87 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4462,7 +4462,27 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + /* + * The pci-e switch on some quad port adapters will report a + * correctable error when the MAC transitions from D0 to D3. To + * prevent this we need to mask off the correctable errors on the + * downstream port of the pci-e switch. + */ + if (adapter->flags & FLAG_IS_QUAD_PORT) { + struct pci_dev *us_dev = pdev->bus->self; + int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP); + u16 devctl; + + pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl); + pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, + (devctl & ~PCI_EXP_DEVCTL_CERE)); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl); + } else { + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + } return 0; } -- 2.39.2