Merge branch 'topic/misc' into for-next

ALSA: control: clean up snd_ctl_hole_check()

The return value of snd_ctl_hole_check() is used only to detect whether
to continue the loop in snd_ctl_find_hole() or not, so we can simplify
the code by changing this return type to a boolean.  Also rename this
function to better show what it actually does.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: control: fix numid conflict check for new controls

The purpose of the snd_ctl_hole_check() function is to find conflicts
between the numerical IDs of the new control and those of any existing
controls.  However, it would fail to detect an existing control whose
count is smaller than the new control's count and whose interval of IDs
is entirely contained in the interval of the new control's IDs.

To fix this, use the correct formula to detect overlapping intervals,
which happens to simplify the condition.

This problem was not encountered so far because ALSA does not yet allow
drivers to allocate specific control IDs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Add firmware ID for older AES32 cards.

The current AES32 firmware revision ID is 234, however, a user confirmed
that everything works fine with the previous revision, too.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/hda' into for-next

ALSA: hda - Don't set to D3 in Cirrus errata init verbs

The errata init verbs for CS42xx codecs contain the verbs to set
the power-state of SPDIF nodes to D3, which seem to break the SPDIF
output on some MacBooks.  Since this is executed during the power-up
initialization, we shouldn't turn them down there.

Reported-by: Arun Raghavan <arun.raghavan@collabora.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/hda' into for-next

ALSA: hda - add new Fermi 5xx codec IDs to snd-hda

Added the missing HDMI codec IDs for new Nvidia stuff.
Note that ID 0x17 isn't assigned to anything so far, as suggested by
Stephen.

[Modified to get rid of 0x17 by tiwai]

Signed-off-by: Richard Samson <samson.richard@gmail.com>
Acked-by: Acked-By: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/asoc' into for-next

ASoC: Add platform data for WM9081 IRQ pin configuration

The WM9081 IRQ output can be either active high or active low and can
support either CMOS or open drain modes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Remove module probe announcements from CODEC drivers

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Fix burstsize and DSP_B format problems in imx-ssi.

When choosing IMX_DMA flag, burtsizes are set to its default
value (0) which leads to driver malfunction. Change them to 4.

DSP_B interface needs additional flag to match DSP_B formats
as described in several codecs as wm8741 and aic3205.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: WM8994: Ensure MICBIAS is provided with a clock

The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle
this case properly.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge branch 'for-2.6.38' into for-2.6.39

ASoC: WM8994: Ensure late enable events are processed for the ADCs

Ensure that the ADCs are provided with a clock as the previous patch
"ASoC: WM8994: Improve playback robustness" did not handle this case
properly.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionaly

Since we began using the late clock disable functionality, ensure that
we don't disable the clock if any of the ADC or DAC paths are still
enabled.  This happens when we have simultaneous playback and recording.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

ASoC: Fix WM9081 platform data initialisation

It went AWOL in the multi-component conversion.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

Merge branch 'fix/hda' into for-next

ALSA: hda - Fix unable to record issue on ASUS N82JV

The codec of N82JV is ALC269VB.

Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/hda' into for-next

ALSA: HDA: Realtek: Fixup jack detection to input subsystem

This patch fixes an error in the jack detection reporting,
causing the jack detection sometimes not to be reported
correctly to the input subsystem. It should apply to several
Realtek codecs.

Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/asoc' into for-next

ASoC: Tegra: Fix error handling in DMA channel alloc

tegra_dma_allocate_channel() returns NULL on errors, not an error pointer.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge branch 'topic/misc' into for-next

ALSA: hdspm - Fix midi port initialization

Depending on the model and the presence of a TCO module, the number of
midi ports varies. Some have 1 port (MADIface), some have 2 (default),
with TCO, there are 3.

Don't hardcode the number of midi ports to initialize.

This patch also fixes a boot lockup on MADIface.

[Coding-style fixes by tiwai]

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Abort on unknown firmware revision

Don't continue if we cannot detect the real card type, otherwise, all
subsequent functions, especially strcpy(), would fail, leaving the whole
driver in an unusable state.

Without such a protection, dmesg would look like this:

Pid: 1525, comm: modprobe Not tainted 2.6.38-rc6 #1 MSI MS-7250/MS-7250
EIP: 0060:[<c114e700>] EFLAGS: 00010296 CPU: 1
EIP is at strcpy+0x10/0x30
EAX: f4d33e58 EBX: f5990800 ECX: f4d33e58 EDX: 00000000
ESI: 00000000 EDI: f4d33e58 EBP: f5990930 ESP: f3dd3e0c
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
f53d4204 00000000 f90bfc03 00000001 00000001 f3dd3e64 c10fedff f3dd3e7c
f3d854e4 f53d4000 c10307b8 00000001 c10307b8 f5990860 c10307b8 00000001
c10332e5 f59908bc c12f4339 f59908bc f5990860 c11ef207 f4d33e00 f53d4000
[<f90bfc03>] ? snd_hdspm_probe+0x7e7/0x1166 [snd_hdspm]
[<c10fedff>] ? __sysfs_add_one+0x1f/0xf0
[<c10307b8>] ? get_parent_ip+0x8/0x20
[<c10307b8>] ? get_parent_ip+0x8/0x20
[<c10307b8>] ? get_parent_ip+0x8/0x20
[<c10332e5>] ? add_preempt_count+0xa5/0xd0
[<c12f4339>] ? _raw_spin_lock_irqsave+0x19/0x40
[<c11ef207>] ? pm_runtime_enable+0x17/0x80
[<c1160172>] ? local_pci_probe+0x42/0xb0
[<c1161091>] ? pci_device_probe+0x61/0x80
[<c11e9587>] ? driver_probe_device+0x77/0x180
[<c11600f0>] ? pci_match_device+0xa0/0xc0
[<c11e9709>] ? __driver_attach+0x79/0x80
[<c11e9690>] ? __driver_attach+0x0/0x80
[<c11e8e32>] ? bus_for_each_dev+0x52/0x80
[<c11e9416>] ? driver_attach+0x16/0x20
[<c11e9690>] ? __driver_attach+0x0/0x80
[<c11e8771>] ? bus_add_driver+0xa1/0x220
[<c1160f20>] ? pci_device_remove+0x0/0xf0
[<c11e99a3>] ? driver_register+0x63/0x120
[<c11612bd>] ? __pci_register_driver+0x3d/0xb0
[<c1001132>] ? do_one_initcall+0x32/0x160
[<f90d6000>] ? alsa_card_hdspm_init+0x0/0x14 [snd_hdspm]
[<c10676a9>] ? sys_init_module+0x99/0x1e0
[<c10ade3d>] ? sys_close+0x6d/0xc0
[<c1002c90>] ? sysenter_do_call+0x12/0x26
---[ end trace 239f0661c558378b ]---

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Add updated firmware revision for AES32

In contrast to the PCIe version (RME AES), the PCI version (RME AES32)
has a different firmware revision.

This patch adds the missing PCI revision.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - AES32: Use define instead of hardcoded channel count

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Staticise non-exported symbols in SGTL5000

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: remove unnecessary header including in SGTL5000 codec driver

Remove unnecessary headers:
 - mach/hardware.h in sgtl5000.c
 - linux/i2c.h in sgtl5000.h

Signed-off-by: Zeng Zhaoming <b32542@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge branch 'topic/misc' into for-next

ALSA: powermac - Allow input from microphone on Tumbler

Allow input from microphone on remaining PowerBooks and iBooks with Tumbler.
Tested only with PowerBook G4 Gigabit Ethernet (PowerBook3,3).

[Fixed to use of_machine_is_compatible by tiwai]

Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/misc' into for-next

sound:core:seq:seq_ports.c Remove one to many n's in a word.

The Patch below removes one to many "n's" in a word..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/asoc' into for-linus

Merge branch 'fix/asoc' into for-next

Merge branch 'for-2.6.38' into for-2.6.39

Merge branch 'topic/asoc' into for-next

ASoC: eukrea-tlv320: add MBIMXSD51 support

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Liam Girdwood <lrg@slimogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: Move WM2000 to dev_pm_ops

There's a general move to use dev_pm_ops rather than bus specific functions
in order to facilitate work on the PM core. Do this conversion to WM2000.
The driver ought to be updated to work better in a multi-component model
but the mechanical conversion ensures that we avoid blocking PM core work
until that happens.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

eukrea-tlv320: fix platform_name

commit f0fba2ad1b6b53d5360125c41953b7afcd6deff0 included a mistake
on the name of the platform in the snd_soc_dai_link structure.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

ASoC: Add Freescale SGTL5000 codec support

Add Freescale SGTL5000 codec support.
Supported features:
 - line-in and mic input
 - headphone and line-out output
 - line-in bypass ADC and DAC to headphone
 - 16, 20, 24, 32 bit audio
 - 8 ~ 96k sample rates

Signed-off-by: Zeng Zhaoming <zhaoming.zeng@freescale.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge branch 'fix/asoc' into for-next

ASoC: remove one to many l's in the word

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge branch 'for-2.6.38' into for-2.6.39

ASoC: Tegra: Move utilities to separate module

The utilities will be required by every machine driver. Including the
utility object directly into every machine driver causes a build failure
if the modules are actually built into the kernel, since each will define
the symbols exported by the utility file. Solve this by moving the
utility object into a separate module.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: soc-dapm: Include quotes around contents in debugfs entries

Sometimes the name of the control switch of a dapm route contains
spaces which makes it impossible to distinguish it from the source widget.
Add quotes around the names of the widgets to makes these parsable.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: Remove -codec suffix from WM9081 driver

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: correct pxa AC97 DAI names

Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix
that for all PXA platforms.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

Merge branch 'topic/misc' into for-next

ALSA: emu10k1 - emu10k1_main.c remove one to many l's in the word.

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda - patch_realtek.c remove one to many l's in the word.

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/hda' into for-next

ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs

Also fix number of 92HD87 pins to exclude invalid pins.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Pass the jack to jack notifiers

We're currently not passing anything and this will make the card and so on
more discoverable.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Merge branch 'topic/hda' into for-next

ALSA: hda - 4930g add internal lfe slider

Lately I sent patch that switched lfe with side in mixer for
acer-aspire-4930g. Then I connected 5.1 speaker system and noticed that
lfe slider wasn't working and that old lfe slider worked. What I'm doing
now is:

- reverting old patch
- adding internal lfe slider
- removing side as it is superfluous (ALC888S-VC is 7.1 but in fact
  laptop can only do 5.1 and it is so in drivers for MS Windows)

Signed-off-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/hda' into for-next

ALSA: HDA: Add ideapad quirk for two Dell machines

These two Dell machines have been reported working well with
the ideapad model.

BugLink: http://bugs.launchpad.net/bugs/723676
Cc: stable@kernel.org
Tested-by: David Chen <david.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: HDA: Add a new Conexant codec 506e (20590)

Conexant 506e/20590 has the same graph as the rest of the 5066 family.

BugLink: http://bugs.launchpad.net/bugs/723672
Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/misc' into for-next

ALSA: hdspm - Fix lock/sync reporting on MADI and AES32

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - prevent reading unitialized stack memory

Original patch by Dan Rosenberg <drosenberg@vsecurity.com> under commit
e68d3b316ab7b02a074edc4f770e6a746390cb7d. I'm copying his text here:

The SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl in hdspm.c allow unprivileged
users to read uninitialized kernel stack memory, because several fields
of the hdspm_config struct declared on the stack are not altered
or zeroed before being copied back to the user.  This patch takes care
of it.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - fix sync check on AES32

Fredrik Lingvall <fredrik.lingvall@gmail.com> has discovered wrong
frequency and sync detection on AES32. According to him, the provided
patch fixes these issues.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Remove input selector on MADIface

In contrast to the RME MADI card, coax/optical selection on the MADIface
is done via a physical switch located at the breakout box. Obviously,
the driver cannot switch ports in software.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Fix DS/QS output channel mappings on RME MADI/MADIface

Caused by two typos, no output channel mappings were assigned for
MADI/MADIface at double/quad speed.

The channel mapping is indeed identical to the single speed mapping, the
cards will simply use the first N channels.

Signed-off-by: Florian Faber <faber@faberman.de>
Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Restrict channel count on RME AES/AES32

Without calling an appropriate rule, AES/AES32 cards would announce a
theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the
already known bug:

[37422.640481] ------------[ cut here ]------------
[37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449
snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]()
[37422.640489] Hardware name: PRIMERGY RX100 S6
[37422.640490] BUG? (info->channel >= hdspm->max_channels_in)
[37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog
ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e
snd_rawmidi power_meter [last unloaded: snd_hdspm]
[37422.640501] Pid: 22231, comm: jackd Tainted: G      D W
2.6.36-gentoo-r5 #5
[37422.640502] Call Trace:
[37422.640508]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
[37422.640511]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
[37422.640514]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
[37422.640518]  [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202
[snd_hdspm]
[37422.640522]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
[37422.640525]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
[37422.640527]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
[37422.640531]  [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59
[37422.640533]  [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227
[37422.640537]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
[37422.640540]  [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e
[37422.640543]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
[37422.640546]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
[37422.640549]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
[37422.640552] ---[ end trace 0cd919cd68118082 ]---

We already have all the right values in place, we simply have to inform
the upper layers about this restriction.

Note that snd_hdspm_hw_rule_rate_out_channels and
snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because
the channel count is always 16, no matter of the samplerate in use.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm - Fix buffer handling on RME MADI/MADIface/AES(32)

Only RayDAT and AIO provide sane buffer pointers that can be used with
HDSPM_BufferPositionMask, on all other cards, this would result in a
wrong HW pointer leading to xruns and these messages:

[260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512
[260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hpdsm - RME AES(32): Fix missing channel mappings

On RME AES and AES(32), none of the required information
(max_channels_in, max_channels_out, channel mappings, port names) was
set, leading to the BUG below.

This patch adds the missing bits, thus fixing the bug.

125.058768] ------------[ cut here ]------------
[  125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389
snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]()
[  125.058775] Hardware name: PRIMERGY RX100 S6
[  125.058777] BUG? (info->channel >= hdspm->max_channels_out)
[  125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si
ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi
i2c_i801
[  125.058787] Pid: 3652, comm: audacity Tainted: G        W
2.6.36-gentoo-r5 #5
[  125.058788] Call Trace:
[  125.058792]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
[  125.058796]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
[  125.058800]  [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8
[snd_hdspm]
[  125.058803]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
[  125.058806]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
[  125.058809]  [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6
[  125.058812]  [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227
[  125.058815]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
[  125.058818]  [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e
[  125.058821]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
[  125.058824]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
[  125.058827]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
[  125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]---

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Florian Faber <faber@faberman.de>
Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/misc' into for-next

ALSA: usb-audio: fix oops due to cleanup race when disconnecting

When a USB audio device is disconnected, snd_usb_audio_disconnect()
kills all audio URBs.  At the same time, the application, after being
notified of the disconnection, might close the device, in which case
ALSA calls the .hw_free callback, which should free the URBs too.

Commit de1b8b93a0ba "[ALSA] Fix hang-up at disconnection of usb-audio"
prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that
resulted from this race, but this introduced another race because the
URB callbacks could now be executed after snd_usb_hw_free() has
returned, and try to access already freed data.

Fix the first race by introducing a mutex to serialize the disconnect
callback and all PCM callbacks that manage URBs (hw_free and hw_params).

Reported-and-tested-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: <stable@kernel.org>
[CL: also serialize hw_params callback]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Simplify default WM8958 jack detection code

The default WM8958 jack detection handler implements a full set of buttons
and also support for video detection. Support for multi-button jacks is
fairly system specific and will usually require some tuning for headsets
so simplify the implementation to only report a simple short to ground
button, leaving multi-button headsets to be handled by system specific
code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Support configuration of WM8958 microphone bias analogue parameters

The WM8958 has a different microphone bias architecture to WM8994 so needs
different configuration to WM8994. Support this in platform data.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Support WM8958 direct microphone detection IRQ

Allow direct routing of the WM8958 microphone detection signal to a GPIO
to be used, saving the need to demux the interrupt.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Mark WM8958 microphone bias registers as readable

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Run bias level changes for all DAPM contexts in parallel

As bias level changes can be quite time consuming and the bias changes
for multiple devices aren't strongly tied to each other (if anything it
can be advantageous to bring different devices up together) we can improve
the state transition time for multi-component systems by running the bias
level changes for all the devices in parallel. This is very simple to
achieve using the kernel async functionality so use that to schedule the
work.

This should have no practical effect for the overwhelming majority of
systems which have a single DAPM context - we'll bounce into another
thread to do the bias level change but otherwise everything will happen
in exactly the same order as it did before.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Remove card from snd_soc_dapm_set_bias_level()

We can get the card from the DAPM context so don't bother passing it as
an argument.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Merge branch 'for-2.6.38' into for-2.6.39

ASoC: Hook wm_hubs micbiases up to CLK_SYS

The microphone detection functionality requires a clock to work. In any
non-detection case where the MICBIAS is enabled CLK_SYS will be needed
anyway so there is no negative impact on power consumption.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Correct definition of WM8903_VMID_RES_5K

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Fix WM8958 default microphone detection argument ordering

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Merge branch 'fix/hda' into for-next

ALSA: HDA: Fix mic initialization in VIA auto parser

This typo caused some microphone inputs not to be correctly
initialized on VIA codecs.

Reported-By: Mark Goldstein <goldstein.mark@gmail.com>
Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/misc' into for-next

ALSA: fix one memory leak in sound jack

Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/misc' into for-next

ALSA - au88x0 - add Playback Volume to 10 bands Equalizer Controls

Add " Playback Volume" to 10 bands Equalizer Controls of au88x0 so that
alsa-lib won't regard them as "Capture Volume".

Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'fix/hda' into for-next

ALSA: HDA: Do not announce false surround in Conexant auto

Without this patch, one line-out and one speaker and
Conexant's auto parser would announce (non-working) surround
capabilities.

BugLink: http://bugs.launchpad.net/bugs/721126
Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: HDA: Conexant auto: Handle multiple connections to ADC node

Conexant 20641 has several inputs to its ADC node, with one selector
and individual amps for all inputs. This patch adds support in the
Conexant auto parser to handle that case.

It also means that the pin node's volume is being renamed to "Boost"
to avoid name clash with the new volume controls on the ADC node.

BugLink: http://bugs.launchpad.net/bugs/719524
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'topic/misc' into for-next

Merge branch 'topic/asoc' into for-next

ALSA: azt3328: hook up new emulated AC97 on AC97 patch side

Make newly created AC97 emulation of azt3328 known to the AC97 layer
side.
- relocate common functions to the top (due to definition after use)
- rename control names
- adjust 3D settings to the card's custom layout of this register

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: azt3328: add custom AC97 semi-emulation use standard ALSA AC97 layer

Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!)
on this weird AC97 copycat hardware,
via semi-extended I/O translation/emulation.

Some 5kB binary/loaded size saved (well... additional huge AC97 module
penalty not factored in, of course ;-P).
Given that the driver previously had 20kB that's not bad,
but the much more important thing is to have AC97 layer stress-tested
with a thoroughly weird AC97 copycat (or, simply put, if it were not for
this AC97 test aspect, this effort would merely have been a nut job ;).

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Hook wm_hubs micbiases up to CLK_SYS

The microphone detection functionality requires a clock to work. In any
non-detection case where the MICBIAS is enabled CLK_SYS will be needed
anyway so there is no negative impact on power consumption.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: Mark WM8958 microphone detection registers readable

So they show up in codec_reg.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ASoC: Add kerneldoc for jack_status_check callback

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Allow GPIO jack detection to be configured as a wake source

Some systems wish to use jacks as wake sources. Provide a wake flag in the
GPIO configuration which causes the driver to enable the IRQ as a wake
source.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Log wm_hubs DC servo operation code when reporting a timeout

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

ASoC: Remove export of snd_soc_dapm_stream_event()

The only thing that should ever be calling this is soc-core and that is
built as part of the same module so doesn't need the export.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>