From: Linus Torvalds Date: Thu, 1 May 2008 15:28:26 +0000 (-0700) Subject: Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6 X-Git-Tag: v2.6.26-rc1~22 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c92758ceda477b1333fde35327cfa867dcc47bd1;hp=03fc922f4085a0139f313831fe2dc6fed467cd2d;p=pandora-kernel.git Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6 * 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (adt7473) minor cleanup / refactoring hwmon: (asb100) Remove some dead code hwmon: (lm75) Fix an incorrect comment hwmon: (w83793) VID and VRM handling cleanups hwmon: (w83l785ts) Don't ask the user to report failures hwmon: (smsc47b397) add a new chip id (0x8c) --- diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts index 1841cedc25b2..bd1fa9d4468d 100644 --- a/Documentation/hwmon/w83l785ts +++ b/Documentation/hwmon/w83l785ts @@ -33,7 +33,8 @@ Known Issues ------------ On some systems (Asus), the BIOS is known to interfere with the driver -and cause read errors. The driver will retry a given number of times +and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable, +we don't really know. The driver will retry a given number of times (5 by default) and then give up, returning the old value (or 0 if there is no old value). It seems to work well enough so that you should not notice anything. Thanks to James Bolt for helping test this feature. diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 9587869bdba0..c1009d6f9796 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -422,18 +422,14 @@ static ssize_t show_volt(struct device *dev, struct device_attribute *devattr, * number in the range -128 to 127, or as an unsigned number that must * be offset by 64. */ -static int decode_temp(struct adt7473_data *data, u8 raw) +static int decode_temp(u8 twos_complement, u8 raw) { - if (data->temp_twos_complement) - return (s8)raw; - return raw - 64; + return twos_complement ? (s8)raw : raw - 64; } -static u8 encode_temp(struct adt7473_data *data, int cooked) +static u8 encode_temp(u8 twos_complement, int cooked) { - if (data->temp_twos_complement) - return (cooked & 0xFF); - return cooked + 64; + return twos_complement ? cooked & 0xFF : cooked + 64; } static ssize_t show_temp_min(struct device *dev, @@ -442,8 +438,9 @@ static ssize_t show_temp_min(struct device *dev, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - 1000 * decode_temp(data, data->temp_min[attr->index])); + return sprintf(buf, "%d\n", 1000 * decode_temp( + data->temp_twos_complement, + data->temp_min[attr->index])); } static ssize_t set_temp_min(struct device *dev, @@ -455,7 +452,7 @@ static ssize_t set_temp_min(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); int temp = simple_strtol(buf, NULL, 10) / 1000; - temp = encode_temp(data, temp); + temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -472,8 +469,9 @@ static ssize_t show_temp_max(struct device *dev, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - 1000 * decode_temp(data, data->temp_max[attr->index])); + return sprintf(buf, "%d\n", 1000 * decode_temp( + data->temp_twos_complement, + data->temp_max[attr->index])); } static ssize_t set_temp_max(struct device *dev, @@ -485,7 +483,7 @@ static ssize_t set_temp_max(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); int temp = simple_strtol(buf, NULL, 10) / 1000; - temp = encode_temp(data, temp); + temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -501,8 +499,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - 1000 * decode_temp(data, data->temp[attr->index])); + return sprintf(buf, "%d\n", 1000 * decode_temp( + data->temp_twos_complement, + data->temp[attr->index])); } static ssize_t show_fan_min(struct device *dev, @@ -671,8 +670,9 @@ static ssize_t show_temp_tmax(struct device *dev, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - 1000 * decode_temp(data, data->temp_tmax[attr->index])); + return sprintf(buf, "%d\n", 1000 * decode_temp( + data->temp_twos_complement, + data->temp_tmax[attr->index])); } static ssize_t set_temp_tmax(struct device *dev, @@ -684,7 +684,7 @@ static ssize_t set_temp_tmax(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); int temp = simple_strtol(buf, NULL, 10) / 1000; - temp = encode_temp(data, temp); + temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); data->temp_tmax[attr->index] = temp; @@ -701,8 +701,9 @@ static ssize_t show_temp_tmin(struct device *dev, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adt7473_data *data = adt7473_update_device(dev); - return sprintf(buf, "%d\n", - 1000 * decode_temp(data, data->temp_tmin[attr->index])); + return sprintf(buf, "%d\n", 1000 * decode_temp( + data->temp_twos_complement, + data->temp_tmin[attr->index])); } static ssize_t set_temp_tmin(struct device *dev, @@ -714,7 +715,7 @@ static ssize_t set_temp_tmin(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); int temp = simple_strtol(buf, NULL, 10) / 1000; - temp = encode_temp(data, temp); + temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); data->temp_tmin[attr->index] = temp; diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 84712a22acea..fe2eea4d799b 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -953,12 +953,8 @@ static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value) static void asb100_init_client(struct i2c_client *client) { struct asb100_data *data = i2c_get_clientdata(client); - int vid = 0; - vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f; - vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; data->vrm = vid_which_vrm(); - vid = vid_from_reg(vid, data->vrm); /* Start monitoring */ asb100_write_value(client, ASB100_REG_CONFIG, diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 115f4090b98e..fa7696905154 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -248,7 +248,7 @@ static int lm75_detach_client(struct i2c_client *client) /* All registers are word-sized, except for the configuration register. LM75 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ + the SMBus standard. */ static int lm75_read_value(struct i2c_client *client, u8 reg) { if (reg == LM75_REG_CONF) @@ -257,9 +257,6 @@ static int lm75_read_value(struct i2c_client *client, u8 reg) return swab16(i2c_smbus_read_word_data(client, reg)); } -/* All registers are word-sized, except for the configuration register. - LM75 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) { if (reg == LM75_REG_CONF) diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index f61d8f4185b2..eb03544c731c 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -335,11 +335,23 @@ exit: static int __init smsc47b397_find(unsigned short *addr) { u8 id, rev; + char *name; superio_enter(); id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); - if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) { + switch(id) { + case 0x81: + name = "SCH5307-NS"; + break; + case 0x6f: + name = "LPC47B397-NC"; + break; + case 0x85: + case 0x8c: + name = "SCH5317"; + break; + default: superio_exit(); return -ENODEV; } @@ -352,8 +364,7 @@ static int __init smsc47b397_find(unsigned short *addr) printk(KERN_INFO DRVNAME ": found SMSC %s " "(base address 0x%04x, revision %u)\n", - id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" : - "LPC47B397-NC", *addr, rev); + name, *addr, rev); superio_exit(); return 0; diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index ee35af93b574..ed3c019b78c7 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -1024,10 +1024,9 @@ static struct sensor_device_attribute_2 w83793_vid[] = { SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0), SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1), }; +static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm); static struct sensor_device_attribute_2 sda_single_files[] = { - SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm, - NOT_USED, NOT_USED), SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep, store_chassis_clear, ALARM_STATUS, 30), SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable, @@ -1080,6 +1079,7 @@ static int w83793_detach_client(struct i2c_client *client) for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) device_remove_file(dev, &w83793_vid[i].dev_attr); + device_remove_file(dev, &dev_attr_vrm); for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++) device_remove_file(dev, &w83793_left_fan[i].dev_attr); @@ -1282,7 +1282,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) /* Initialize the chip */ w83793_init_client(client); - data->vrm = vid_which_vrm(); /* Only fan 1-5 has their own input pins, Pwm 1-3 has their own pins @@ -1293,7 +1292,9 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) val = w83793_read_value(client, W83793_REG_FANIN_CTRL); /* check the function of pins 49-56 */ - if (!(tmp & 0x80)) { + if (tmp & 0x80) { + data->has_vid |= 0x2; /* has VIDB */ + } else { data->has_pwm |= 0x18; /* pwm 4,5 */ if (val & 0x01) { /* fan 6 */ data->has_fan |= 0x20; @@ -1309,13 +1310,15 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) } } + /* check the function of pins 37-40 */ + if (!(tmp & 0x29)) + data->has_vid |= 0x1; /* has VIDA */ if (0x08 == (tmp & 0x0c)) { if (val & 0x08) /* fan 9 */ data->has_fan |= 0x100; if (val & 0x10) /* fan 10 */ data->has_fan |= 0x200; } - if (0x20 == (tmp & 0x30)) { if (val & 0x20) /* fan 11 */ data->has_fan |= 0x400; @@ -1359,13 +1362,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) if (tmp & 0x02) data->has_temp |= 0x20; - /* Detect the VID usage and ignore unused input */ - tmp = w83793_read_value(client, W83793_REG_MFC); - if (!(tmp & 0x29)) - data->has_vid |= 0x1; /* has VIDA */ - if (tmp & 0x80) - data->has_vid |= 0x2; /* has VIDB */ - /* Register sysfs hooks */ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) { err = device_create_file(dev, @@ -1381,6 +1377,12 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) if (err) goto exit_remove; } + if (data->has_vid) { + data->vrm = vid_which_vrm(); + err = device_create_file(dev, &dev_attr_vrm); + if (err) + goto exit_remove; + } for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) { err = device_create_file(dev, &sda_single_files[i].dev_attr); diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 77f2d482888b..52e268e25dab 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -301,8 +301,8 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) msleep(i); } - dev_err(&client->dev, "Couldn't read value from register 0x%02x. " - "Please report.\n", reg); + dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n", + reg); return defval; }