From: J. Neuschäfer Date: Tue, 20 Jan 2026 15:20:38 +0000 (+0100) Subject: board: sunxi: Add X96Q support X-Git-Tag: v2026.04-rc1~4^2 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8805aa120ca5341ca14d8f7f2311f7a85d57a5f9;p=pandora-u-boot.git board: sunxi: Add X96Q support The X96Q is a set-top box with an H313 SoC, AXP305 PMIC, 1 or 2 GiB RAM, 8 or 16 GiB eMMC flash, 2x USB A, Micro-SD, HDMI, Ethernet, audio/video output, and infrared input. https://x96mini.com/products/x96q-tv-box-android-10-set-top-box This commit adds a defconfig and some documentation. The devicetree is already in dts/upstream. The CONFIG_DRAM_SUNXI_* settings are chosen such that the register values in the DRAM PHY's MMIO space are as close as possible to those observed when booting with the preinstalled vendor U-Boot. The DRAM clock frequency of 600 MHz was reported in the vendor U-Boot's output. Signed-off-by: J. Neuschäfer Reviewed-by: Andre Przywara --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index c52e8a34c85..775d0f7ae83 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -611,6 +611,11 @@ M: Andre Przywara S: Maintained F: configs/x96_mate_defconfig +X96Q TV BOX +M: J. Neuschäfer +S: Maintained +F: configs/x96q_defconfig + X96Q PRO+ TV BOX M: Andre Przywara S: Maintained diff --git a/configs/x96q_defconfig b/configs/x96q_defconfig new file mode 100644 index 00000000000..59f01aae4eb --- /dev/null +++ b/configs/x96q_defconfig @@ -0,0 +1,27 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h313-x96q" +CONFIG_DRAM_CLK=600 +CONFIG_SPL=y +CONFIG_DRAM_SUNXI_DX_ODT=0x03030303 +CONFIG_DRAM_SUNXI_DX_DRI=0x0e0e0e0e +CONFIG_DRAM_SUNXI_CA_DRI=0x1f12 +CONFIG_DRAM_SUNXI_TPR0=0xc0001002 +CONFIG_DRAM_SUNXI_TPR2=0x00000100 +CONFIG_DRAM_SUNXI_TPR10=0x002f0107 +CONFIG_DRAM_SUNXI_TPR11=0xddddcccc +CONFIG_DRAM_SUNXI_TPR12=0xeddc7665 +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_SUN8I_EMAC=y +CONFIG_AXP305_POWER=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y