From: David Brownell Date: Thu, 2 Oct 2008 02:48:21 +0000 (-0700) Subject: twl4030-gpio.h removal X-Git-Tag: v2.6.27-omap1~94 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=13d97456d615e339f78afa981e20e80104a03d5d;p=pandora-kernel.git twl4030-gpio.h removal The directory has too many headers for twl4030 support. Start simplifying that by moving twl430-gpio.h into the main twl4030.h and also: - Providing comments to summarize the { module, offset } logical addressing vs the { i2c_client, register } physical addressing. - Moving the { module, offset } based I/O calls next to the place those modules are defined, with slightly improved descriptions. - Adding some section markers internal to twl4030.h so unrelated things can be visually separated. - Move TWL4030_GPIO_MAX adjacent to the other GPIO symbols. - Remove two more now-obsolete symbols (for GPIO pullup/pulldown). - Have global definitions of the three SIH_CTRL register bits, following the pattern of twl4030-core.c (and fixing a minor fault handling bug in reading the clear-on-read bit). To keep things simple, the only blocks with register declarations in this file should be ones with registers that (cleanly) get shared between components ... modules with SIH registers (for IRQ handling) being the obvious candidates. No functional changes. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index d9303f76f7c7..a38a02353372 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -38,7 +38,6 @@ #include #include -#include /* @@ -79,11 +78,6 @@ static int twl4030_gpio_irq_end; #define is_module() false #endif -/* GPIO_SIH_CTRL Fields */ -#define MASK_GPIO_SIH_CTRL_EXCLEN BIT(0) -#define MASK_GPIO_SIH_CTRL_PENDDIS BIT(1) -#define MASK_GPIO_SIH_CTRL_COR BIT(2) - /* GPIO_CTRL Fields */ #define MASK_GPIO_CTRL_GPIO0CD1 BIT(0) #define MASK_GPIO_CTRL_GPIO1CD2 BIT(1) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index 9debab4eccb4..16511637e863 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -39,7 +39,6 @@ #include #include -#include #include #include @@ -183,7 +182,6 @@ static inline void activate_irq(int irq) #define TWL4030_MADC_MADC_SIH_CTRL 0x67 #define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 -#define TWL4030_SIH_CTRL_COR_MASK (1 << 2) /** * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init @@ -341,12 +339,20 @@ struct twl4030mapping { /* mapping the module id to slave id and base address */ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { + /* + * NOTE: don't change this table without updating the + * defines for TWL4030_MODULE_* + * so they continue to match the order in this table. + */ + { TWL4030_SLAVENUM_NUM0, TWL4030_BASEADD_USB }, + { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_AUDIO_VOICE }, { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_GPIO }, { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_INTBR }, { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_PIH }, { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_TEST }, + { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_KEYPAD }, { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_MADC }, { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_INTERRUPTS }, @@ -357,6 +363,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWM1 }, { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMA }, { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMB }, + { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_BACKUP }, { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_INT }, { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_PM_MASTER }, @@ -1080,7 +1087,6 @@ static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t, /* Are ISRs cleared by reads or writes? */ cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl); - WARN_ON(cor < 0); for (j = 0; j < tmr.reg_cnt; j++) { diff --git a/include/linux/i2c/twl4030-gpio.h b/include/linux/i2c/twl4030-gpio.h deleted file mode 100644 index 7cbf610d48cb..000000000000 --- a/include/linux/i2c/twl4030-gpio.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * twl4030-gpio.h - header for TWL4030 GPIO module - * - * Copyright (C) 2005-2006, 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation - * - * Based on tlv320aic23.c: - * Copyright (c) by Kai Svahn - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __TWL4030_GPIO_H_ -#define __TWL4030_GPIO_H_ - -/* - * GPIO Block Register definitions - */ - -#define REG_GPIODATAIN1 0x0 -#define REG_GPIODATAIN2 0x1 -#define REG_GPIODATAIN3 0x2 -#define REG_GPIODATADIR1 0x3 -#define REG_GPIODATADIR2 0x4 -#define REG_GPIODATADIR3 0x5 -#define REG_GPIODATAOUT1 0x6 -#define REG_GPIODATAOUT2 0x7 -#define REG_GPIODATAOUT3 0x8 -#define REG_CLEARGPIODATAOUT1 0x9 -#define REG_CLEARGPIODATAOUT2 0xA -#define REG_CLEARGPIODATAOUT3 0xB -#define REG_SETGPIODATAOUT1 0xC -#define REG_SETGPIODATAOUT2 0xD -#define REG_SETGPIODATAOUT3 0xE -#define REG_GPIO_DEBEN1 0xF -#define REG_GPIO_DEBEN2 0x10 -#define REG_GPIO_DEBEN3 0x11 -#define REG_GPIO_CTRL 0x12 -#define REG_GPIOPUPDCTR1 0x13 -#define REG_GPIOPUPDCTR2 0x14 -#define REG_GPIOPUPDCTR3 0x15 -#define REG_GPIOPUPDCTR4 0x16 -#define REG_GPIOPUPDCTR5 0x17 -#define REG_GPIO_ISR1A 0x19 -#define REG_GPIO_ISR2A 0x1A -#define REG_GPIO_ISR3A 0x1B -#define REG_GPIO_IMR1A 0x1C -#define REG_GPIO_IMR2A 0x1D -#define REG_GPIO_IMR3A 0x1E -#define REG_GPIO_ISR1B 0x1F -#define REG_GPIO_ISR2B 0x20 -#define REG_GPIO_ISR3B 0x21 -#define REG_GPIO_IMR1B 0x22 -#define REG_GPIO_IMR2B 0x23 -#define REG_GPIO_IMR3B 0x24 -#define REG_GPIO_EDR1 0x28 -#define REG_GPIO_EDR2 0x29 -#define REG_GPIO_EDR3 0x2A -#define REG_GPIO_EDR4 0x2B -#define REG_GPIO_EDR5 0x2C -#define REG_GPIO_SIH_CTRL 0x2D - -#endif /* End of __TWL4030_GPIO_H */ diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index f5a1bfa3b6cd..3899c71aa88f 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -25,15 +25,28 @@ #ifndef __TWL4030_H_ #define __TWL4030_H_ -/* USB ID */ +/* + * Using the twl4030 core we address registers using a pair + * { module id, relative register offset } + * which that core then maps to the relevant + * { i2c slave, absolute register address } + * + * The module IDs are meaningful only to the twl4030 core code, + * which uses them as array indices to look up the first register + * address each module uses within a given i2c slave. + */ + +/* Slave 0 (i2c address 0x48) */ #define TWL4030_MODULE_USB 0x00 -/* AUD ID */ + +/* Slave 1 (i2c address 0x49) */ #define TWL4030_MODULE_AUDIO_VOICE 0x01 #define TWL4030_MODULE_GPIO 0x02 #define TWL4030_MODULE_INTBR 0x03 #define TWL4030_MODULE_PIH 0x04 #define TWL4030_MODULE_TEST 0x05 -/* AUX ID */ + +/* Slave 2 (i2c address 0x4a) */ #define TWL4030_MODULE_KEYPAD 0x06 #define TWL4030_MODULE_MADC 0x07 #define TWL4030_MODULE_INTERRUPTS 0x08 @@ -44,7 +57,8 @@ #define TWL4030_MODULE_PWM1 0x0D #define TWL4030_MODULE_PWMA 0x0E #define TWL4030_MODULE_PWMB 0x0F -/* POWER ID */ + +/* Slave 3 (i2c address 0x4b) */ #define TWL4030_MODULE_BACKUP 0x10 #define TWL4030_MODULE_INT 0x11 #define TWL4030_MODULE_PM_MASTER 0x12 @@ -52,6 +66,92 @@ #define TWL4030_MODULE_RTC 0x14 #define TWL4030_MODULE_SECURED_REG 0x15 +/* + * Read and write single 8-bit registers + */ +int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); +int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); + +/* + * Read and write several 8-bit registers at once. + * + * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 + * for the value, and populate your data starting at offset 1. + */ +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); + +/*----------------------------------------------------------------------*/ + +/* + * NOTE: at up to 1024 registers, this is a big chip. + * + * Avoid putting register declarations in this file, instead of into + * a driver-private file, unless some of the registers in a block + * need to be shared with other drivers. One example is blocks that + * have Secondary IRQ Handler (SIH) registers. + */ + +#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) +#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) +#define TWL4030_SIH_CTRL_COR_MASK BIT(2) + +/*----------------------------------------------------------------------*/ + +/* + * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) + */ + +#define REG_GPIODATAIN1 0x0 +#define REG_GPIODATAIN2 0x1 +#define REG_GPIODATAIN3 0x2 +#define REG_GPIODATADIR1 0x3 +#define REG_GPIODATADIR2 0x4 +#define REG_GPIODATADIR3 0x5 +#define REG_GPIODATAOUT1 0x6 +#define REG_GPIODATAOUT2 0x7 +#define REG_GPIODATAOUT3 0x8 +#define REG_CLEARGPIODATAOUT1 0x9 +#define REG_CLEARGPIODATAOUT2 0xA +#define REG_CLEARGPIODATAOUT3 0xB +#define REG_SETGPIODATAOUT1 0xC +#define REG_SETGPIODATAOUT2 0xD +#define REG_SETGPIODATAOUT3 0xE +#define REG_GPIO_DEBEN1 0xF +#define REG_GPIO_DEBEN2 0x10 +#define REG_GPIO_DEBEN3 0x11 +#define REG_GPIO_CTRL 0x12 +#define REG_GPIOPUPDCTR1 0x13 +#define REG_GPIOPUPDCTR2 0x14 +#define REG_GPIOPUPDCTR3 0x15 +#define REG_GPIOPUPDCTR4 0x16 +#define REG_GPIOPUPDCTR5 0x17 +#define REG_GPIO_ISR1A 0x19 +#define REG_GPIO_ISR2A 0x1A +#define REG_GPIO_ISR3A 0x1B +#define REG_GPIO_IMR1A 0x1C +#define REG_GPIO_IMR2A 0x1D +#define REG_GPIO_IMR3A 0x1E +#define REG_GPIO_ISR1B 0x1F +#define REG_GPIO_ISR2B 0x20 +#define REG_GPIO_ISR3B 0x21 +#define REG_GPIO_IMR1B 0x22 +#define REG_GPIO_IMR2B 0x23 +#define REG_GPIO_IMR3B 0x24 +#define REG_GPIO_EDR1 0x28 +#define REG_GPIO_EDR2 0x29 +#define REG_GPIO_EDR3 0x2A +#define REG_GPIO_EDR4 0x2B +#define REG_GPIO_EDR5 0x2C +#define REG_GPIO_SIH_CTRL 0x2D + +/* Up to 18 signals are available as GPIOs, when their + * pins are not assigned to another use (such as ULPI/USB). + */ +#define TWL4030_GPIO_MAX 18 + +/*----------------------------------------------------------------------*/ + struct twl4030_bci_platform_data { int *battery_tmp_tbl; unsigned int tblsize; @@ -109,6 +209,8 @@ struct twl4030_platform_data { /* REVISIT more to come ... _nothing_ should be hard-wired */ }; +/*----------------------------------------------------------------------*/ + /* * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the * IRQ data to subsidiary devices using platform device resources. @@ -148,28 +250,8 @@ struct twl4030_platform_data { /* TWL4030 GPIO interrupt definitions */ -#define TWL4030_GPIO_MAX 18 #define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n)) #define TWL4030_GPIO_IS_ENABLE 1 -#define TWL4030_GPIO_PULL_UP 0 -#define TWL4030_GPIO_PULL_DOWN 1 - -/* Functions to read and write from TWL4030 */ - -/* - * IMP NOTE: - * The base address of the module will be added by the triton driver - * It is the caller's responsibility to ensure sane values - */ -int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); - - /* - * i2c_write: IMPORTANT - Allocate value num_bytes+1 and valid data starts at - * Offset 1. - */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); /* * Exported TWL4030 GPIO APIs