From: Bartlomiej Zolnierkiewicz Date: Sat, 17 Mar 2007 20:57:41 +0000 (+0100) Subject: ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options X-Git-Tag: v2.6.21-rc5~69^2 X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=120b9cfddff2e398fece07c5e127f3fdbb660441;p=pandora-kernel.git ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options All modern distributions have been setting these options to "y" for ages. (additionally "n" cases have been obsoleted for few years). Therefore use DMA by default and remove CONFIG_IDEDMA_{ICS,PCI}_AUTO (also remove no longer needed CONFIG_IDEDMA_AUTO). This fixes DMA support for rare configurations where CONFIG_IDEDMA_{ICS,PCI}_AUTO was set to "n" but "hdparm -d 1" was used to enable DMA support and which were forced to PIO mode by "ide: don't allow DMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO=n" patch. There is no functionality loss because "ide=nodma" kernel option is still available. Cc: Patrick Horn Cc: Sergei Shtylyov Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 98a1ff23c34a..8f1fd017679b 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -434,24 +434,8 @@ config BLK_DEV_IDEDMA_FORCED Generally say N here. -config IDEDMA_PCI_AUTO - bool "Use PCI DMA by default when available" - ---help--- - Prior to kernel version 2.1.112, Linux used to automatically use - DMA for IDE drives and chipsets which support it. Due to concerns - about a couple of cases where buggy hardware may have caused damage, - the default is now to NOT use DMA automatically. To revert to the - previous behaviour, say Y to this question. - - If you suspect your hardware is at all flakey, say N here. - Do NOT email the IDE kernel people regarding this issue! - - It is normally safe to answer Y to this question unless your - motherboard uses a VIA VP2 chipset, in which case you should say N. - config IDEDMA_ONLYDISK bool "Enable DMA only for disks " - depends on IDEDMA_PCI_AUTO help This is used if you know your ATAPI Devices are going to fail DMA Transfers. @@ -851,19 +835,6 @@ config BLK_DEV_IDEDMA_ICS Say Y here if you want to add DMA (Direct Memory Access) support to the ICS IDE driver. -config IDEDMA_ICS_AUTO - bool "Use ICS DMA by default" - depends on BLK_DEV_IDEDMA_ICS - help - Prior to kernel version 2.1.112, Linux used to automatically use - DMA for IDE drives and chipsets which support it. Due to concerns - about a couple of cases where buggy hardware may have caused damage, - the default is now to NOT use DMA automatically. To revert to the - previous behaviour, say Y to this question. - - If you suspect your hardware is at all flakey, say N here. - Do NOT email the IDE kernel people regarding this issue! - config BLK_DEV_IDE_RAPIDE tristate "RapIDE interface support" depends on ARM && ARCH_ACORN @@ -1086,9 +1057,6 @@ config IDEDMA_IVB It is normally safe to answer Y; however, the default is N. -config IDEDMA_AUTO - def_bool IDEDMA_PCI_AUTO || IDEDMA_ICS_AUTO - endif config BLK_DEV_HD_ONLY diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 40e5c66b81ce..e2953fc1fafb 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -196,11 +196,6 @@ static void icside_maskproc(ide_drive_t *drive, int mask) } #ifdef CONFIG_BLK_DEV_IDEDMA_ICS - -#ifndef CONFIG_IDEDMA_ICS_AUTO -#warning CONFIG_IDEDMA_ICS_AUTO=n support is obsolete, and will be removed soon. -#endif - /* * SG-DMA support. * @@ -474,12 +469,6 @@ static int icside_dma_lostirq(ide_drive_t *drive) static void icside_dma_init(ide_hwif_t *hwif) { - int autodma = 0; - -#ifdef CONFIG_IDEDMA_ICS_AUTO - autodma = 1; -#endif - printk(" %s: SG-DMA", hwif->name); hwif->atapi_dma = 1; @@ -489,7 +478,7 @@ static void icside_dma_init(ide_hwif_t *hwif) hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; hwif->speedproc = icside_set_speed; - hwif->autodma = autodma; + hwif->autodma = 1; hwif->ide_dma_check = icside_dma_check; hwif->dma_host_off = icside_dma_host_off; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index dfbd74458522..695610f0e3e4 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -177,11 +177,7 @@ DECLARE_MUTEX(ide_cfg_sem); static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ #endif -#ifdef CONFIG_IDEDMA_AUTO int noautodma = 0; -#else -int noautodma = 1; -#endif EXPORT_SYMBOL(noautodma); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index a52c80fe7d3e..118fb3205ca8 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -505,11 +505,6 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwi } } } - -#ifndef CONFIG_IDEDMA_PCI_AUTO -#warning CONFIG_IDEDMA_PCI_AUTO=n support is obsolete, and will be removed soon. -#endif - #endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/ /**