Merge tag 'imx-features-board-20120411-2' of git://git.pengutronix.de/git/imx/linux...
authorOlof Johansson <olof@lixom.net>
Wed, 25 Apr 2012 18:04:14 +0000 (11:04 -0700)
committerOlof Johansson <olof@lixom.net>
Wed, 25 Apr 2012 18:04:14 +0000 (11:04 -0700)
* tag 'imx-features-board-20120411-2' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX: Visstrim_M10: Add board version detection.
  ARM: imx_v4_v5_defconfig: enable adc and touch driver of mc13783
  ARM: i.MX: i.MX35-PDK: Add regulator support

1  2 
arch/arm/configs/imx_v4_v5_defconfig
arch/arm/mach-imx/mach-mx35_3ds.c

@@@ -92,6 -92,7 +92,7 @@@ CONFIG_INPUT_EVDEV=
  # CONFIG_INPUT_MOUSE is not set
  CONFIG_INPUT_TOUCHSCREEN=y
  CONFIG_TOUCHSCREEN_ADS7846=m
+ CONFIG_TOUCHSCREEN_MC13783=m
  # CONFIG_SERIO is not set
  # CONFIG_LEGACY_PTYS is not set
  CONFIG_SERIAL_8250=m
@@@ -107,12 -108,12 +108,13 @@@ CONFIG_SPI_SPIDEV=
  CONFIG_W1=y
  CONFIG_W1_MASTER_MXC=y
  CONFIG_W1_SLAVE_THERM=y
- # CONFIG_HWMON is not set
+ CONFIG_HWMON=m
+ CONFIG_SENSORS_MC13783_ADC=m
  CONFIG_WATCHDOG=y
  CONFIG_IMX2_WDT=y
  CONFIG_MFD_MC13XXX=y
  CONFIG_REGULATOR=y
 +CONFIG_REGULATOR_FIXED_VOLTAGE=y
  CONFIG_REGULATOR_MC13783=y
  CONFIG_REGULATOR_MC13892=y
  CONFIG_FB=y
@@@ -34,6 -34,8 +34,8 @@@
  #include <linux/usb/otg.h>
  
  #include <linux/mtd/physmap.h>
+ #include <linux/mfd/mc13892.h>
+ #include <linux/regulator/machine.h>
  
  #include <asm/mach-types.h>
  #include <asm/mach/arch.h>
@@@ -97,7 -99,7 +99,7 @@@ static struct i2c_board_info __initdat
  static int lcd_power_gpio = -ENXIO;
  
  static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
 -                                                   void *data)
 +                                                   const void *data)
  {
        return !strcmp(chip->label, data);
  }
@@@ -253,6 -255,8 +255,8 @@@ static iomux_v3_cfg_t mx35pdk_pads[] = 
        MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
        MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
        MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
+       /*PMIC IRQ*/
+       MX35_PAD_GPIO2_0__GPIO2_0,
  };
  
  /*
@@@ -317,6 -321,193 +321,193 @@@ static struct platform_device mx35_3ds_
        },
  };
  
+ static struct regulator_consumer_supply sw1_consumers[] = {
+       {
+               .supply = "cpu_vcc",
+       }
+ };
+ static struct regulator_consumer_supply vcam_consumers[] = {
+       /* sgtl5000 */
+       REGULATOR_SUPPLY("VDDA", "0-000a"),
+ };
+ static struct regulator_consumer_supply vaudio_consumers[] = {
+       REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
+ };
+ static struct regulator_init_data sw1_init = {
+       .constraints = {
+               .name = "SW1",
+               .min_uV = 600000,
+               .max_uV = 1375000,
+               .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+               .valid_modes_mask = 0,
+               .always_on = 1,
+               .boot_on = 1,
+       },
+       .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+       .consumer_supplies = sw1_consumers,
+ };
+ static struct regulator_init_data sw2_init = {
+       .constraints = {
+               .name = "SW2",
+               .always_on = 1,
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data sw3_init = {
+       .constraints = {
+               .name = "SW3",
+               .always_on = 1,
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data sw4_init = {
+       .constraints = {
+               .name = "SW4",
+               .always_on = 1,
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data viohi_init = {
+       .constraints = {
+               .name = "VIOHI",
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data vusb_init = {
+       .constraints = {
+               .name = "VUSB",
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data vdig_init = {
+       .constraints = {
+               .name = "VDIG",
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data vpll_init = {
+       .constraints = {
+               .name = "VPLL",
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data vusb2_init = {
+       .constraints = {
+               .name = "VUSB2",
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data vvideo_init = {
+       .constraints = {
+               .name = "VVIDEO",
+               .boot_on = 1
+       }
+ };
+ static struct regulator_init_data vaudio_init = {
+       .constraints = {
+               .name = "VAUDIO",
+               .min_uV = 2300000,
+               .max_uV = 3000000,
+               .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+               .boot_on = 1
+       },
+       .num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
+       .consumer_supplies = vaudio_consumers,
+ };
+ static struct regulator_init_data vcam_init = {
+       .constraints = {
+               .name = "VCAM",
+               .min_uV = 2500000,
+               .max_uV = 3000000,
+               .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                                       REGULATOR_CHANGE_MODE,
+               .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+               .boot_on = 1
+       },
+       .num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
+       .consumer_supplies = vcam_consumers,
+ };
+ static struct regulator_init_data vgen1_init = {
+       .constraints = {
+               .name = "VGEN1",
+       }
+ };
+ static struct regulator_init_data vgen2_init = {
+       .constraints = {
+               .name = "VGEN2",
+               .boot_on = 1,
+       }
+ };
+ static struct regulator_init_data vgen3_init = {
+       .constraints = {
+               .name = "VGEN3",
+       }
+ };
+ static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
+       { .id = MC13892_SW1, .init_data = &sw1_init },
+       { .id = MC13892_SW2, .init_data = &sw2_init },
+       { .id = MC13892_SW3, .init_data = &sw3_init },
+       { .id = MC13892_SW4, .init_data = &sw4_init },
+       { .id = MC13892_VIOHI, .init_data = &viohi_init },
+       { .id = MC13892_VPLL, .init_data = &vpll_init },
+       { .id = MC13892_VDIG, .init_data = &vdig_init },
+       { .id = MC13892_VUSB2, .init_data = &vusb2_init },
+       { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+       { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+       { .id = MC13892_VCAM, .init_data = &vcam_init },
+       { .id = MC13892_VGEN1, .init_data = &vgen1_init },
+       { .id = MC13892_VGEN2, .init_data = &vgen2_init },
+       { .id = MC13892_VGEN3, .init_data = &vgen3_init },
+       { .id = MC13892_VUSB, .init_data = &vusb_init },
+ };
+ static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
+       .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
+       .regulators = {
+               .num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
+               .regulators = mx35_3ds_regulators,
+       },
+ };
+ #define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
+ static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
+       I2C_BOARD_INFO("mc13892", 0x08),
+       .platform_data = &mx35_3ds_mc13892_data,
+       .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ };
+ static void __init imx35_3ds_init_mc13892(void)
+ {
+       int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
+       if (ret) {
+               pr_err("failed to get pmic irq: %d\n", ret);
+               return;
+       }
+       i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
+ }
  static int mx35_3ds_otg_init(struct platform_device *pdev)
  {
        return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
@@@ -412,6 -603,8 +603,8 @@@ static void __init mx35_3ds_init(void
        imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
        mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
        platform_device_register(&mx35_3ds_lcd);
+       imx35_3ds_init_mc13892();
  }
  
  static void __init mx35pdk_timer_init(void)