device tree bindings for your controller.
GPIOs mappings are defined in the consumer device's node, in a property named
-<function>-gpios, where <function> is the function the driver will request
-through gpiod_get(). For example:
+either <function>-gpios or <function>-gpio, where <function> is the function
+the driver will request through gpiod_get(). For example:
foo_device {
compatible = "acme,foo";
<&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
<&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
- power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
};
This property will make GPIOs 15, 16 and 17 available to the driver under the
struct gpio_desc *red, *green, *blue, *power;
- red = gpiod_get_index(dev, "led", 0);
- green = gpiod_get_index(dev, "led", 1);
- blue = gpiod_get_index(dev, "led", 2);
+ red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+ green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+ blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
- power = gpiod_get(dev, "power");
+ power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
gpiod_is_active_low(power) will be true).
+The second parameter of the gpiod_get() functions, the con_id string, has to be
+the <function>-prefix of the GPIO suffixes ("gpios" or "gpio", automatically
+looked up by the gpiod functions internally) used in the device tree. With above
+"led-gpios" example, use the prefix without the "-" as con_id parameter: "led".
+
+Internally, the GPIO subsystem prefixes the GPIO suffix ("gpios" or "gpio")
+with the string passed in con_id to get the resulting string
+(snprintf(... "%s-%s", con_id, gpio_suffixes[]).
+
ACPI
----
ACPI also supports function names for GPIOs in a similar fashion to DT.
struct gpio_desc *red, *green, *blue, *power;
- red = gpiod_get_index(dev, "led", 0);
- green = gpiod_get_index(dev, "led", 1);
- blue = gpiod_get_index(dev, "led", 2);
+ red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+ green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+ blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
- power = gpiod_get(dev, "power");
- gpiod_direction_output(power, 1);
+ power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
-Since the "power" GPIO is mapped as active-low, its actual signal will be 0
-after this code. Contrary to the legacy integer GPIO interface, the active-low
-property is handled during mapping and is thus transparent to GPIO consumers.
+Since the "led" GPIOs are mapped as active-high, this example will switch their
+signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
+as active-low, its actual signal will be 0 after this code. Contrary to the legacy
+integer GPIO interface, the active-low property is handled during mapping and is
+thus transparent to GPIO consumers.
const char *con_id, unsigned int idx,
enum gpiod_flags flags)
+For a more detailed description of the con_id parameter in the DeviceTree case
+see Documentation/gpio/board.txt
+
The flags parameter is used to optionally specify a direction and initial value
for the GPIO. Values can be:
LD += -EL
endif
+#
+# The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and
+# later may result in code being generated that handles signed short and signed
+# char struct members incorrectly. So disable it.
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932)
+#
+KBUILD_CFLAGS += $(call cc-option,-fno-ipa-sra)
+
# This selects which instruction set is used.
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
#endif
.endm
- .macro uaccess_save_and_disable, tmp
- uaccess_save \tmp
- uaccess_disable \tmp
- .endm
-
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro ret\c, reg
#if __LINUX_ARM_ARCH__ < 6
"2:\t.asciz " #__file "\n" \
".popsection\n" \
".pushsection __bug_table,\"a\"\n" \
+ ".align 2\n" \
"3:\t.word 1b, 2b\n" \
"\t.hword " #__line ", 0\n" \
".popsection"); \
#ifndef __ASSEMBLY__
#include <asm/barrier.h>
+#include <asm/thread_info.h>
#endif
/*
asm(
"mrc p15, 0, %0, c3, c0 @ get domain"
- : "=r" (domain));
+ : "=r" (domain)
+ : "m" (current_thread_info()->cpu_domain));
return domain;
}
{
asm volatile(
"mcr p15, 0, %0, c3, c0 @ set domain"
- : : "r" (val));
+ : : "r" (val) : "memory");
isb();
}
struct task_struct;
#include <asm/types.h>
-#include <asm/domain.h>
typedef unsigned long mm_segment_t;
memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
+#ifdef CONFIG_CPU_USE_DOMAINS
/*
* Copy the initial value of the domain access control register
* from the current thread: thread->addr_limit will have been
* kernel/fork.c
*/
thread->cpu_domain = get_domain();
+#endif
if (likely(!(p->flags & PF_KTHREAD))) {
*childregs = *current_pt_regs();
reteq r4 @ no, return failure
next:
+ uaccess_enable r3
.Lx1: ldrt r6, [r5], #4 @ get the next instruction and
@ increment PC
-
+ uaccess_disable r3
and r2, r6, #0x0F000000 @ test for FP insns
teq r2, #0x0C000000
teqne r2, #0x0D000000
mov r1, r2
mov r2, r3
ldr r3, [sp, #8]
+ /*
+ * Privcmd calls are issued by the userspace. We need to allow the
+ * kernel to access the userspace memory before issuing the hypercall.
+ */
+ uaccess_enable r4
+
+ /* r4 is loaded now as we use it as scratch register before */
ldr r4, [sp, #4]
__HVC(XEN_IMM)
+
+ /*
+ * Disable userspace access from kernel. This is fine to do it
+ * unconditionally as no set_fs(KERNEL_DS)/set_fs(get_ds()) is
+ * called before.
+ */
+ uaccess_disable r4
+
ldm sp!, {r4}
ret lr
ENDPROC(privcmd_call);
-#define NR_syscalls 319 /* length of syscall table */
+#define NR_syscalls 321 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_memfd_create 1340
#define __NR_bpf 1341
#define __NR_execveat 1342
+#define __NR_userfaultfd 1343
+#define __NR_membarrier 1344
#endif /* _UAPI_ASM_IA64_UNISTD_H */
data8 sys_memfd_create // 1340
data8 sys_bpf
data8 sys_execveat
+ data8 sys_userfaultfd
+ data8 sys_membarrier
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
char *xbuf[XBUFSIZE];
char *xoutbuf[XBUFSIZE];
int ret = -ENOMEM;
+ unsigned int ivsize = crypto_skcipher_ivsize(tfm);
if (testmgr_alloc_buf(xbuf))
goto out_nobuf;
continue;
if (template[i].iv)
- memcpy(iv, template[i].iv, MAX_IVLEN);
+ memcpy(iv, template[i].iv, ivsize);
else
memset(iv, 0, MAX_IVLEN);
continue;
if (template[i].iv)
- memcpy(iv, template[i].iv, MAX_IVLEN);
+ memcpy(iv, template[i].iv, ivsize);
else
memset(iv, 0, MAX_IVLEN);
#include <linux/err.h>
#include <linux/device.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
static DEFINE_SPINLOCK(clklock);
config COMMON_CLK_HI6220
bool "Hi6220 Clock Driver"
- depends on (ARCH_HISI || COMPILE_TEST) && MAILBOX
+ depends on ARCH_HISI || COMPILE_TEST
default ARCH_HISI
help
Build the Hisilicon Hi6220 clock driver based on the common clock framework.
+
+config STUB_CLK_HI6220
+ bool "Hi6220 Stub Clock Driver"
+ depends on COMMON_CLK_HI6220 && MAILBOX
+ help
+ Build the Hisilicon Hi6220 stub clock driver.
obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
-obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o clk-hi6220-stub.o
+obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o
+obj-$(CONFIG_STUB_CLK_HI6220) += clk-hi6220-stub.o
"aclk_cpu",
"aclk_peri",
"hclk_peri",
+ "pclk_cpu",
+ "pclk_peri",
};
static void __init rk3188_common_clk_init(struct device_node *np)
rockchip_clk_register_branches(common_clk_branches,
ARRAY_SIZE(common_clk_branches));
- rockchip_clk_protect_critical(rk3188_critical_clocks,
- ARRAY_SIZE(rk3188_critical_clocks));
rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
ROCKCHIP_SOFTRST_HIWORD_MASK);
mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
&rk3066_cpuclk_data, rk3066_cpuclk_rates,
ARRAY_SIZE(rk3066_cpuclk_rates));
+ rockchip_clk_protect_critical(rk3188_critical_clocks,
+ ARRAY_SIZE(rk3188_critical_clocks));
}
CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n",
__func__);
}
+
+ rockchip_clk_protect_critical(rk3188_critical_clocks,
+ ARRAY_SIZE(rk3188_critical_clocks));
}
CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init);
config CRYPTO_DEV_VMX
bool "Support for VMX cryptographic acceleration instructions"
- depends on PPC64
+ depends on PPC64 && VSX
help
Support for VMX cryptographic acceleration instructions.
sg_miter_next(&mo);
oo = 0;
}
- } while (mo.length > 0);
+ } while (oleft > 0);
if (areq->info) {
for (i = 0; i < 4 && i < ivsize / 4; i++) {
config GPIO_RCAR
tristate "Renesas R-Car GPIO"
- depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+ depends on ARCH_SHMOBILE || COMPILE_TEST
select GPIOLIB_IRQCHIP
help
Say yes here to support GPIO on Renesas R-Car SoCs.
return 0;
}
-static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
+static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
port->base, handle_level_irq);
+ if (!gc)
+ return -ENOMEM;
gc->private = port;
ct = gc->chip_types;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
IRQ_NOREQUEST, 0);
+
+ return 0;
}
static void mxc_gpio_get_hw(struct platform_device *pdev)
}
/* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port, irq_base);
+ err = mxc_gpio_init_gc(port, irq_base);
+ if (err < 0)
+ goto out_irqdomain_remove;
list_add_tail(&port->node, &mxc_gpio_ports);
return 0;
+out_irqdomain_remove:
+ irq_domain_remove(port->domain);
out_irqdesc_free:
irq_free_descs(irq_base, 32);
out_gpiochip_remove:
return 0;
}
-static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
+static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
port->base, handle_level_irq);
+ if (!gc)
+ return -ENOMEM;
+
gc->private = port;
ct = gc->chip_types;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
IRQ_NOREQUEST, 0);
+
+ return 0;
}
static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
}
/* gpio-mxs can be a generic irq chip */
- mxs_gpio_init_gc(port, irq_base);
+ err = mxs_gpio_init_gc(port, irq_base);
+ if (err < 0)
+ goto out_irqdomain_remove;
/* setup one handler for each entry */
irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
out_bgpio_remove:
bgpio_remove(&port->bgc);
+out_irqdomain_remove:
+ irq_domain_remove(port->domain);
out_irqdesc_free:
irq_free_descs(irq_base, 32);
return err;
} else {
bank->chip.label = "gpio";
bank->chip.base = gpio;
- gpio += bank->width;
}
bank->chip.ngpio = bank->width;
return ret;
}
+ if (!bank->is_mpuio)
+ gpio += bank->width;
+
#ifdef CONFIG_ARCH_OMAP1
/*
* REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
omap_gpio_mod_init(bank);
ret = omap_gpio_chip_init(bank, irqc);
- if (ret)
+ if (ret) {
+ pm_runtime_put_sync(bank->dev);
+ pm_runtime_disable(bank->dev);
return ret;
+ }
omap_gpio_show_rev(bank);
MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:sx150x");
* that the GPIO was actually requested.
*/
-static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
+static int _gpiod_get_raw_value(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
- bool value;
int offset;
+ int value;
chip = desc->chip;
offset = gpio_chip_hwgpio(desc);
- value = chip->get ? chip->get(chip, offset) : false;
+ value = chip->get ? chip->get(chip, offset) : -EIO;
+ value = value < 0 ? value : !!value;
trace_gpio_value(desc_to_gpio(desc), 1, value);
return value;
}
* @desc: gpio whose value will be returned
*
* Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
*
* This function should be called from contexts where we cannot sleep, and will
* complain if the GPIO chip functions potentially sleep.
* @desc: gpio whose value will be returned
*
* Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
*
* This function should be called from contexts where we cannot sleep, and will
* complain if the GPIO chip functions potentially sleep.
WARN_ON(desc->chip->can_sleep);
value = _gpiod_get_raw_value(desc);
+ if (value < 0)
+ return value;
+
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
value = !value;
* @desc: gpio whose value will be returned
*
* Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
*
* This function is to be called from contexts that can sleep.
*/
* @desc: gpio whose value will be returned
*
* Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
*
* This function is to be called from contexts that can sleep.
*/
return 0;
value = _gpiod_get_raw_value(desc);
+ if (value < 0)
+ return value;
+
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
value = !value;
struct pinctrl_gpio_range *range = NULL;
struct gpio_chip *chip = gpio_to_chip(gpio);
+ if (WARN(!chip, "no gpio_chip for gpio%i?", gpio))
+ return false;
+
mutex_lock(&pinctrldev_list_mutex);
/* Loop over the pin controllers */
pmap->dev = &pdev->dev;
pmap->pctl = pinctrl_register(pctl_desc, &pdev->dev, pmap);
- if (!pmap->pctl) {
+ if (IS_ERR(pmap->pctl)) {
dev_err(&pdev->dev, "pinctrl driver registration failed\n");
- return -EINVAL;
+ return PTR_ERR(pmap->pctl);
}
ret = dc_gpiochip_add(pmap, pdev->dev.of_node);
/* See if this pctldev has this function */
while (selector < nfuncs) {
- const char *fname = ops->get_function_name(pctldev,
- selector);
+ const char *fname = ops->get_function_name(pctldev, selector);
if (!strcmp(function, fname))
return selector;
#endif
pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl);
- if (!pctrl->pctrl) {
+ if (IS_ERR(pctrl->pctrl)) {
dev_err(&pdev->dev, "couldn't register pm8xxx gpio driver\n");
- return -ENODEV;
+ return PTR_ERR(pctrl->pctrl);
}
pctrl->chip = pm8xxx_gpio_template;
#endif
pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl);
- if (!pctrl->pctrl) {
+ if (IS_ERR(pctrl->pctrl)) {
dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n");
- return -ENODEV;
+ return PTR_ERR(pctrl->pctrl);
}
pctrl->chip = pm8xxx_mpp_template;
u32 offset, u32 range)
{
struct s3c24xx_eint_data *data = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_irq_chip(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
struct samsung_pinctrl_drv_data *d = data->drvdata;
unsigned int pend, mask;
static void
cifs_show_security(struct seq_file *s, struct cifs_ses *ses)
{
- if (ses->sectype == Unspecified)
+ if (ses->sectype == Unspecified) {
+ if (ses->user_name == NULL)
+ seq_puts(s, ",sec=none");
return;
+ }
seq_puts(s, ",sec=");
goto out_drop_write;
}
+ if (src_file.file->f_op->unlocked_ioctl != cifs_ioctl) {
+ rc = -EBADF;
+ cifs_dbg(VFS, "src file seems to be from a different filesystem type\n");
+ goto out_fput;
+ }
+
if ((!src_file.file->private_data) || (!dst_file->private_data)) {
rc = -EBADF;
cifs_dbg(VFS, "missing cifsFileInfo on copy range src file\n");
/* Extract X.509 certificate in DER form from PKCS#11 or PEM.
*
- * Copyright © 2014 Red Hat, Inc. All Rights Reserved.
- * Copyright © 2015 Intel Corporation.
+ * Copyright © 2014-2015 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2015 Intel Corporation.
*
* Authors: David Howells <dhowells@redhat.com>
* David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the licence, or (at your option) any later version.
*/
#define _GNU_SOURCE
#include <stdio.h>
/* Sign a module file using the given key.
*
- * Copyright (C) 2014 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
+ * Copyright © 2014-2015 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2015 Intel Corporation.
+ *
+ * Authors: David Howells <dhowells@redhat.com>
+ * David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the licence, or (at your option) any later version.
*/
#define _GNU_SOURCE
#include <stdio.h>
git.openpandora.org / pandora-kernel.git / commitdiff