X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=kernel%2Ftimer.c;h=c2a8ccfc288210fb45a3ae199c94572edbbc72b4;hb=b06b5a53adcc3ace1a82b324edf2b0c37e7be00e;hp=4f55622b0d38462ad59b28322d31ebeee8a0c40c;hpb=0cd43f83d381c4246a08cd775834833d6fd64805;p=pandora-kernel.git diff --git a/kernel/timer.c b/kernel/timer.c index 4f55622b0d38..c2a8ccfc2882 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -41,12 +41,6 @@ #include #include -#ifdef CONFIG_TIME_INTERPOLATION -static void time_interpolator_update(long delta_nsec); -#else -#define time_interpolator_update(x) -#endif - u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES; EXPORT_SYMBOL(jiffies_64); @@ -86,6 +80,138 @@ tvec_base_t boot_tvec_bases; EXPORT_SYMBOL(boot_tvec_bases); static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = &boot_tvec_bases; +/** + * __round_jiffies - function to round jiffies to a full second + * @j: the time in (absolute) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * __round_jiffies rounds an absolute time in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The exact rounding is skewed for each processor to avoid all + * processors firing at the exact same time, which could lead + * to lock contention or spurious cache line bouncing. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long __round_jiffies(unsigned long j, int cpu) +{ + int rem; + unsigned long original = j; + + /* + * We don't want all cpus firing their timers at once hitting the + * same lock or cachelines, so we skew each extra cpu with an extra + * 3 jiffies. This 3 jiffies came originally from the mm/ code which + * already did this. + * The skew is done by adding 3*cpunr, then round, then subtract this + * extra offset again. + */ + j += cpu * 3; + + rem = j % HZ; + + /* + * If the target jiffie is just after a whole second (which can happen + * due to delays of the timer irq, long irq off times etc etc) then + * we should round down to the whole second, not up. Use 1/4th second + * as cutoff for this rounding as an extreme upper bound for this. + */ + if (rem < HZ/4) /* round down */ + j = j - rem; + else /* round up */ + j = j - rem + HZ; + + /* now that we have rounded, subtract the extra skew again */ + j -= cpu * 3; + + if (j <= jiffies) /* rounding ate our timeout entirely; */ + return original; + return j; +} +EXPORT_SYMBOL_GPL(__round_jiffies); + +/** + * __round_jiffies_relative - function to round jiffies to a full second + * @j: the time in (relative) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * __round_jiffies_relative rounds a time delta in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The exact rounding is skewed for each processor to avoid all + * processors firing at the exact same time, which could lead + * to lock contention or spurious cache line bouncing. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long __round_jiffies_relative(unsigned long j, int cpu) +{ + /* + * In theory the following code can skip a jiffy in case jiffies + * increments right between the addition and the later subtraction. + * However since the entire point of this function is to use approximate + * timeouts, it's entirely ok to not handle that. + */ + return __round_jiffies(j + jiffies, cpu) - jiffies; +} +EXPORT_SYMBOL_GPL(__round_jiffies_relative); + +/** + * round_jiffies - function to round jiffies to a full second + * @j: the time in (absolute) jiffies that should be rounded + * + * round_jiffies rounds an absolute time in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long round_jiffies(unsigned long j) +{ + return __round_jiffies(j, raw_smp_processor_id()); +} +EXPORT_SYMBOL_GPL(round_jiffies); + +/** + * round_jiffies_relative - function to round jiffies to a full second + * @j: the time in (relative) jiffies that should be rounded + * + * round_jiffies_relative rounds a time delta in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long round_jiffies_relative(unsigned long j) +{ + return __round_jiffies_relative(j, raw_smp_processor_id()); +} +EXPORT_SYMBOL_GPL(round_jiffies_relative); + + static inline void set_running_timer(tvec_base_t *base, struct timer_list *timer) { @@ -568,12 +694,6 @@ found: /******************************************************************/ -/* - * Timekeeping variables - */ -unsigned long tick_usec = TICK_USEC; /* USER_HZ period (usec) */ -unsigned long tick_nsec = TICK_NSEC; /* ACTHZ period (nsec) */ - /* * The current time * wall_to_monotonic is what we need to add to xtime (or xtime corrected @@ -587,209 +707,6 @@ struct timespec wall_to_monotonic __attribute__ ((aligned (16))); EXPORT_SYMBOL(xtime); -/* Don't completely fail for HZ > 500. */ -int tickadj = 500/HZ ? : 1; /* microsecs */ - - -/* - * phase-lock loop variables - */ -/* TIME_ERROR prevents overwriting the CMOS clock */ -int time_state = TIME_OK; /* clock synchronization status */ -int time_status = STA_UNSYNC; /* clock status bits */ -long time_offset; /* time adjustment (us) */ -long time_constant = 2; /* pll time constant */ -long time_tolerance = MAXFREQ; /* frequency tolerance (ppm) */ -long time_precision = 1; /* clock precision (us) */ -long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */ -long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */ -long time_freq = (((NSEC_PER_SEC + HZ/2) % HZ - HZ/2) << SHIFT_USEC) / NSEC_PER_USEC; - /* frequency offset (scaled ppm)*/ -static long time_adj; /* tick adjust (scaled 1 / HZ) */ -long time_reftime; /* time at last adjustment (s) */ -long time_adjust; -long time_next_adjust; - -/* - * this routine handles the overflow of the microsecond field - * - * The tricky bits of code to handle the accurate clock support - * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. - * They were originally developed for SUN and DEC kernels. - * All the kudos should go to Dave for this stuff. - * - */ -static void second_overflow(void) -{ - long ltemp; - - /* Bump the maxerror field */ - time_maxerror += time_tolerance >> SHIFT_USEC; - if (time_maxerror > NTP_PHASE_LIMIT) { - time_maxerror = NTP_PHASE_LIMIT; - time_status |= STA_UNSYNC; - } - - /* - * Leap second processing. If in leap-insert state at the end of the - * day, the system clock is set back one second; if in leap-delete - * state, the system clock is set ahead one second. The microtime() - * routine or external clock driver will insure that reported time is - * always monotonic. The ugly divides should be replaced. - */ - switch (time_state) { - case TIME_OK: - if (time_status & STA_INS) - time_state = TIME_INS; - else if (time_status & STA_DEL) - time_state = TIME_DEL; - break; - case TIME_INS: - if (xtime.tv_sec % 86400 == 0) { - xtime.tv_sec--; - wall_to_monotonic.tv_sec++; - /* - * The timer interpolator will make time change - * gradually instead of an immediate jump by one second - */ - time_interpolator_update(-NSEC_PER_SEC); - time_state = TIME_OOP; - clock_was_set(); - printk(KERN_NOTICE "Clock: inserting leap second " - "23:59:60 UTC\n"); - } - break; - case TIME_DEL: - if ((xtime.tv_sec + 1) % 86400 == 0) { - xtime.tv_sec++; - wall_to_monotonic.tv_sec--; - /* - * Use of time interpolator for a gradual change of - * time - */ - time_interpolator_update(NSEC_PER_SEC); - time_state = TIME_WAIT; - clock_was_set(); - printk(KERN_NOTICE "Clock: deleting leap second " - "23:59:59 UTC\n"); - } - break; - case TIME_OOP: - time_state = TIME_WAIT; - break; - case TIME_WAIT: - if (!(time_status & (STA_INS | STA_DEL))) - time_state = TIME_OK; - } - - /* - * Compute the phase adjustment for the next second. In PLL mode, the - * offset is reduced by a fixed factor times the time constant. In FLL - * mode the offset is used directly. In either mode, the maximum phase - * adjustment for each second is clamped so as to spread the adjustment - * over not more than the number of seconds between updates. - */ - ltemp = time_offset; - if (!(time_status & STA_FLL)) - ltemp = shift_right(ltemp, SHIFT_KG + time_constant); - ltemp = min(ltemp, (MAXPHASE / MINSEC) << SHIFT_UPDATE); - ltemp = max(ltemp, -(MAXPHASE / MINSEC) << SHIFT_UPDATE); - time_offset -= ltemp; - time_adj = ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE); - - /* - * Compute the frequency estimate and additional phase adjustment due - * to frequency error for the next second. - */ - ltemp = time_freq; - time_adj += shift_right(ltemp,(SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE)); - -#if HZ == 100 - /* - * Compensate for (HZ==100) != (1 << SHIFT_HZ). Add 25% and 3.125% to - * get 128.125; => only 0.125% error (p. 14) - */ - time_adj += shift_right(time_adj, 2) + shift_right(time_adj, 5); -#endif -#if HZ == 250 - /* - * Compensate for (HZ==250) != (1 << SHIFT_HZ). Add 1.5625% and - * 0.78125% to get 255.85938; => only 0.05% error (p. 14) - */ - time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7); -#endif -#if HZ == 1000 - /* - * Compensate for (HZ==1000) != (1 << SHIFT_HZ). Add 1.5625% and - * 0.78125% to get 1023.4375; => only 0.05% error (p. 14) - */ - time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7); -#endif -} - -/* - * Returns how many microseconds we need to add to xtime this tick - * in doing an adjustment requested with adjtime. - */ -static long adjtime_adjustment(void) -{ - long time_adjust_step; - - time_adjust_step = time_adjust; - if (time_adjust_step) { - /* - * We are doing an adjtime thing. Prepare time_adjust_step to - * be within bounds. Note that a positive time_adjust means we - * want the clock to run faster. - * - * Limit the amount of the step to be in the range - * -tickadj .. +tickadj - */ - time_adjust_step = min(time_adjust_step, (long)tickadj); - time_adjust_step = max(time_adjust_step, (long)-tickadj); - } - return time_adjust_step; -} - -/* in the NTP reference this is called "hardclock()" */ -static void update_ntp_one_tick(void) -{ - long time_adjust_step; - - time_adjust_step = adjtime_adjustment(); - if (time_adjust_step) - /* Reduce by this step the amount of time left */ - time_adjust -= time_adjust_step; - - /* Changes by adjtime() do not take effect till next tick. */ - if (time_next_adjust != 0) { - time_adjust = time_next_adjust; - time_next_adjust = 0; - } -} - -/* - * Return how long ticks are at the moment, that is, how much time - * update_wall_time_one_tick will add to xtime next time we call it - * (assuming no calls to do_adjtimex in the meantime). - * The return value is in fixed-point nanoseconds shifted by the - * specified number of bits to the right of the binary point. - * This function has no side-effects. - */ -u64 current_tick_length(void) -{ - long delta_nsec; - u64 ret; - - /* calculate the finest interval NTP will allow. - * ie: nanosecond value shifted by (SHIFT_SCALE - 10) - */ - delta_nsec = tick_nsec + adjtime_adjustment() * 1000; - ret = (u64)delta_nsec << TICK_LENGTH_SHIFT; - ret += (s64)time_adj << (TICK_LENGTH_SHIFT - (SHIFT_SCALE - 10)); - - return ret; -} /* XXX - all of this timekeeping code should be later moved to time.c */ #include @@ -929,7 +846,7 @@ static int change_clocksource(void) clock = new; clock->cycle_last = now; printk(KERN_INFO "Time: %s clocksource has been installed.\n", - clock->name); + clock->name); return 1; } else if (clock->update_callback) { return clock->update_callback(); @@ -937,7 +854,10 @@ static int change_clocksource(void) return 0; } #else -#define change_clocksource() (0) +static inline int change_clocksource(void) +{ + return 0; +} #endif /** @@ -966,10 +886,13 @@ void __init timekeeping_init(void) unsigned long flags; write_seqlock_irqsave(&xtime_lock, flags); + + ntp_clear(); + clock = clocksource_get_next(); clocksource_calculate_interval(clock, tick_nsec); clock->cycle_last = clocksource_read(clock); - ntp_clear(); + write_sequnlock_irqrestore(&xtime_lock, flags); } @@ -980,7 +903,7 @@ static int timekeeping_suspended; * @dev: unused * * This is for the generic clocksource timekeeping. - * xtime/wall_to_monotonic/jiffies/wall_jiffies/etc are + * xtime/wall_to_monotonic/jiffies/etc are * still managed by arch specific suspend/resume code. */ static int timekeeping_resume(struct sys_device *dev) @@ -1032,7 +955,8 @@ device_initcall(timekeeping_init_device); * If the error is already larger, we look ahead even further * to compensate for late or lost adjustments. */ -static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset) +static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, + s64 *offset) { s64 tick_error, i; u32 look_ahead, adj; @@ -1056,7 +980,8 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 * * Now calculate the error in (1 << look_ahead) ticks, but first * remove the single look ahead already included in the error. */ - tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1); + tick_error = current_tick_length() >> + (TICK_LENGTH_SHIFT - clock->shift + 1); tick_error -= clock->xtime_interval >> 1; error = ((error - tick_error) >> look_ahead) + tick_error; @@ -1108,7 +1033,8 @@ static void clocksource_adjust(struct clocksource *clock, s64 offset) clock->mult += adj; clock->xtime_interval += interval; clock->xtime_nsec -= offset; - clock->error -= (interval - offset) << (TICK_LENGTH_SHIFT - clock->shift); + clock->error -= (interval - offset) << + (TICK_LENGTH_SHIFT - clock->shift); } /** @@ -1149,8 +1075,6 @@ static void update_wall_time(void) /* interpolator bits */ time_interpolator_update(clock->xtime_interval >> clock->shift); - /* increment the NTP state machine */ - update_ntp_one_tick(); /* accumulate error between NTP and clock interval */ clock->error += current_tick_length(); @@ -1222,17 +1146,18 @@ static inline void calc_load(unsigned long ticks) unsigned long active_tasks; /* fixed-point */ static int count = LOAD_FREQ; - active_tasks = count_active_tasks(); - for (count -= ticks; count < 0; count += LOAD_FREQ) { - CALC_LOAD(avenrun[0], EXP_1, active_tasks); - CALC_LOAD(avenrun[1], EXP_5, active_tasks); - CALC_LOAD(avenrun[2], EXP_15, active_tasks); + count -= ticks; + if (unlikely(count < 0)) { + active_tasks = count_active_tasks(); + do { + CALC_LOAD(avenrun[0], EXP_1, active_tasks); + CALC_LOAD(avenrun[1], EXP_5, active_tasks); + CALC_LOAD(avenrun[2], EXP_15, active_tasks); + count += LOAD_FREQ; + } while (count < 0); } } -/* jiffies at the most recent update of wall time */ -unsigned long wall_jiffies = INITIAL_JIFFIES; - /* * This read-write spinlock protects us from races in SMP while * playing with xtime and avenrun. @@ -1270,7 +1195,6 @@ void run_local_timers(void) */ static inline void update_times(unsigned long ticks) { - wall_jiffies += ticks; update_wall_time(); calc_load(ticks); } @@ -1420,11 +1344,10 @@ fastcall signed long __sched schedule_timeout(signed long timeout) * should never happens anyway). You just have the printk() * that will tell you if something is gone wrong and where. */ - if (timeout < 0) - { + if (timeout < 0) { printk(KERN_ERR "schedule_timeout: wrong timeout " - "value %lx from %p\n", timeout, - __builtin_return_address(0)); + "value %lx\n", timeout); + dump_stack(); current->state = TASK_RUNNING; goto out; } @@ -1775,7 +1698,7 @@ unsigned long time_interpolator_get_offset(void) #define INTERPOLATOR_ADJUST 65536 #define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST -static void time_interpolator_update(long delta_nsec) +void time_interpolator_update(long delta_nsec) { u64 counter; unsigned long offset;