X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=ipc%2Fsem.c;h=506c8491a8d131761432aa306e51eef441863887;hb=b508998f665ee6d6a15eae11be258c3e94c33562;hp=dbef95b1594122c2a6276d504d206805d39879f7;hpb=3560adf62075829393743667ff338dd8fd26a5c2;p=pandora-kernel.git diff --git a/ipc/sem.c b/ipc/sem.c index dbef95b15941..506c8491a8d1 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -3,56 +3,6 @@ * Copyright (C) 1992 Krishna Balasubramanian * Copyright (C) 1995 Eric Schenk, Bruno Haible * - * IMPLEMENTATION NOTES ON CODE REWRITE (Eric Schenk, January 1995): - * This code underwent a massive rewrite in order to solve some problems - * with the original code. In particular the original code failed to - * wake up processes that were waiting for semval to go to 0 if the - * value went to 0 and was then incremented rapidly enough. In solving - * this problem I have also modified the implementation so that it - * processes pending operations in a FIFO manner, thus give a guarantee - * that processes waiting for a lock on the semaphore won't starve - * unless another locking process fails to unlock. - * In addition the following two changes in behavior have been introduced: - * - The original implementation of semop returned the value - * last semaphore element examined on success. This does not - * match the manual page specifications, and effectively - * allows the user to read the semaphore even if they do not - * have read permissions. The implementation now returns 0 - * on success as stated in the manual page. - * - There is some confusion over whether the set of undo adjustments - * to be performed at exit should be done in an atomic manner. - * That is, if we are attempting to decrement the semval should we queue - * up and wait until we can do so legally? - * The original implementation attempted to do this. - * The current implementation does not do so. This is because I don't - * think it is the right thing (TM) to do, and because I couldn't - * see a clean way to get the old behavior with the new design. - * The POSIX standard and SVID should be consulted to determine - * what behavior is mandated. - * - * Further notes on refinement (Christoph Rohland, December 1998): - * - The POSIX standard says, that the undo adjustments simply should - * redo. So the current implementation is o.K. - * - The previous code had two flaws: - * 1) It actively gave the semaphore to the next waiting process - * sleeping on the semaphore. Since this process did not have the - * cpu this led to many unnecessary context switches and bad - * performance. Now we only check which process should be able to - * get the semaphore and if this process wants to reduce some - * semaphore value we simply wake it up without doing the - * operation. So it has to try to get it later. Thus e.g. the - * running process may reacquire the semaphore during the current - * time slice. If it only waits for zero or increases the semaphore, - * we do the operation in advance and wake it up. - * 2) It did not wake up all zero waiting processes. We try to do - * better but only get the semops right which only wait for zero or - * increase. If there are decrement operations in the operations - * array we do the same as before. - * - * With the incarnation of O(1) scheduler, it becomes unnecessary to perform - * check/retry algorithm for waking up blocked processes as the new scheduler - * is better at handling thread switch than the old one. - * * /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie * * SMP-threaded, sysctl's added @@ -61,6 +11,8 @@ * (c) 2001 Red Hat Inc * Lockless wakeup * (c) 2003 Manfred Spraul + * Further wakeup optimizations, documentation + * (c) 2010 Manfred Spraul * * support for audit of ipc object properties and permission changes * Dustin Kirkland @@ -68,6 +20,57 @@ * namespaces support * OpenVZ, SWsoft Inc. * Pavel Emelianov + * + * Implementation notes: (May 2010) + * This file implements System V semaphores. + * + * User space visible behavior: + * - FIFO ordering for semop() operations (just FIFO, not starvation + * protection) + * - multiple semaphore operations that alter the same semaphore in + * one semop() are handled. + * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and + * SETALL calls. + * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO. + * - undo adjustments at process exit are limited to 0..SEMVMX. + * - namespace are supported. + * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing + * to /proc/sys/kernel/sem. + * - statistics about the usage are reported in /proc/sysvipc/sem. + * + * Internals: + * - scalability: + * - all global variables are read-mostly. + * - semop() calls and semctl(RMID) are synchronized by RCU. + * - most operations do write operations (actually: spin_lock calls) to + * the per-semaphore array structure. + * Thus: Perfect SMP scaling between independent semaphore arrays. + * If multiple semaphores in one array are used, then cache line + * trashing on the semaphore array spinlock will limit the scaling. + * - semncnt and semzcnt are calculated on demand in count_semncnt() and + * count_semzcnt() + * - the task that performs a successful semop() scans the list of all + * sleeping tasks and completes any pending operations that can be fulfilled. + * Semaphores are actively given to waiting tasks (necessary for FIFO). + * (see update_queue()) + * - To improve the scalability, the actual wake-up calls are performed after + * dropping all locks. (see wake_up_sem_queue_prepare(), + * wake_up_sem_queue_do()) + * - All work is done by the waker, the woken up task does not have to do + * anything - not even acquiring a lock or dropping a refcount. + * - A woken up task may not even touch the semaphore array anymore, it may + * have been destroyed already by a semctl(RMID). + * - The synchronizations between wake-ups due to a timeout/signal and a + * wake-up due to a completed semaphore operation is achieved by using an + * intermediate state (IN_WAKEUP). + * - UNDO values are stored in an array (one per process and per + * semaphore array, lazily allocated). For backwards compatibility, multiple + * modes for the UNDO variables are supported (per process, per thread) + * (see copy_semundo, CLONE_SYSVSEM) + * - There are two lists of the pending operations: a per-array list + * and per-semaphore list (stored in the array). This allows to achieve FIFO + * ordering without always scanning all pending operations. + * The worst-case behavior is nevertheless O(N^2) for N wakeups. */ #include @@ -381,7 +384,6 @@ static int try_atomic_semop (struct sem_array * sma, struct sembuf * sops, sop--; } - sma->sem_otime = get_seconds(); return 0; out_of_range: @@ -404,25 +406,51 @@ undo: return result; } -/* - * Wake up a process waiting on the sem queue with a given error. - * The queue is invalid (may not be accessed) after the function returns. +/** wake_up_sem_queue_prepare(q, error): Prepare wake-up + * @q: queue entry that must be signaled + * @error: Error value for the signal + * + * Prepare the wake-up of the queue entry q. */ -static void wake_up_sem_queue(struct sem_queue *q, int error) +static void wake_up_sem_queue_prepare(struct list_head *pt, + struct sem_queue *q, int error) { - /* - * Hold preempt off so that we don't get preempted and have the - * wakee busy-wait until we're scheduled back on. We're holding - * locks here so it may not strictly be needed, however if the - * locks become preemptible then this prevents such a problem. - */ - preempt_disable(); + if (list_empty(pt)) { + /* + * Hold preempt off so that we don't get preempted and have the + * wakee busy-wait until we're scheduled back on. + */ + preempt_disable(); + } q->status = IN_WAKEUP; - wake_up_process(q->sleeper); - /* hands-off: q can disappear immediately after writing q->status. */ - smp_wmb(); - q->status = error; - preempt_enable(); + q->pid = error; + + list_add_tail(&q->simple_list, pt); +} + +/** + * wake_up_sem_queue_do(pt) - do the actual wake-up + * @pt: list of tasks to be woken up + * + * Do the actual wake-up. + * The function is called without any locks held, thus the semaphore array + * could be destroyed already and the tasks can disappear as soon as the + * status is set to the actual return code. + */ +static void wake_up_sem_queue_do(struct list_head *pt) +{ + struct sem_queue *q, *t; + int did_something; + + did_something = !list_empty(pt); + list_for_each_entry_safe(q, t, pt, simple_list) { + wake_up_process(q->sleeper); + /* q can disappear immediately after writing q->status. */ + smp_wmb(); + q->status = q->pid; + } + if (did_something) + preempt_enable(); } static void unlink_queue(struct sem_array *sma, struct sem_queue *q) @@ -434,22 +462,90 @@ static void unlink_queue(struct sem_array *sma, struct sem_queue *q) sma->complex_count--; } +/** check_restart(sma, q) + * @sma: semaphore array + * @q: the operation that just completed + * + * update_queue is O(N^2) when it restarts scanning the whole queue of + * waiting operations. Therefore this function checks if the restart is + * really necessary. It is called after a previously waiting operation + * was completed. + */ +static int check_restart(struct sem_array *sma, struct sem_queue *q) +{ + struct sem *curr; + struct sem_queue *h; + + /* if the operation didn't modify the array, then no restart */ + if (q->alter == 0) + return 0; + + /* pending complex operations are too difficult to analyse */ + if (sma->complex_count) + return 1; + + /* we were a sleeping complex operation. Too difficult */ + if (q->nsops > 1) + return 1; + + curr = sma->sem_base + q->sops[0].sem_num; + + /* No-one waits on this queue */ + if (list_empty(&curr->sem_pending)) + return 0; + + /* the new semaphore value */ + if (curr->semval) { + /* It is impossible that someone waits for the new value: + * - q is a previously sleeping simple operation that + * altered the array. It must be a decrement, because + * simple increments never sleep. + * - The value is not 0, thus wait-for-zero won't proceed. + * - If there are older (higher priority) decrements + * in the queue, then they have observed the original + * semval value and couldn't proceed. The operation + * decremented to value - thus they won't proceed either. + */ + BUG_ON(q->sops[0].sem_op >= 0); + return 0; + } + /* + * semval is 0. Check if there are wait-for-zero semops. + * They must be the first entries in the per-semaphore simple queue + */ + h = list_first_entry(&curr->sem_pending, struct sem_queue, simple_list); + BUG_ON(h->nsops != 1); + BUG_ON(h->sops[0].sem_num != q->sops[0].sem_num); + + /* Yes, there is a wait-for-zero semop. Restart */ + if (h->sops[0].sem_op == 0) + return 1; + + /* Again - no-one is waiting for the new value. */ + return 0; +} + /** * update_queue(sma, semnum): Look for tasks that can be completed. * @sma: semaphore array. * @semnum: semaphore that was modified. + * @pt: list head for the tasks that must be woken up. * * update_queue must be called after a semaphore in a semaphore array * was modified. If multiple semaphore were modified, then @semnum * must be set to -1. + * The tasks that must be woken up are added to @pt. The return code + * is stored in q->pid. + * The function return 1 if at least one semop was completed successfully. */ -static void update_queue(struct sem_array *sma, int semnum) +static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt) { struct sem_queue *q; struct list_head *walk; struct list_head *pending_list; int offset; + int semop_completed = 0; /* if there are complex operations around, then knowing the semaphore * that was modified doesn't help us. Assume that multiple semaphores @@ -469,7 +565,7 @@ static void update_queue(struct sem_array *sma, int semnum) again: walk = pending_list->next; while (walk != pending_list) { - int error, alter; + int error, restart; q = (struct sem_queue *)((char *)walk - offset); walk = walk->next; @@ -494,22 +590,58 @@ again: unlink_queue(sma, q); - /* - * The next operation that must be checked depends on the type - * of the completed operation: - * - if the operation modified the array, then restart from the - * head of the queue and check for threads that might be - * waiting for the new semaphore values. - * - if the operation didn't modify the array, then just - * continue. - */ - alter = q->alter; - wake_up_sem_queue(q, error); - if (alter && !error) + if (error) { + restart = 0; + } else { + semop_completed = 1; + restart = check_restart(sma, q); + } + + wake_up_sem_queue_prepare(pt, q, error); + if (restart) goto again; } + return semop_completed; +} + +/** + * do_smart_update(sma, sops, nsops, otime, pt) - optimized update_queue + * @sma: semaphore array + * @sops: operations that were performed + * @nsops: number of operations + * @otime: force setting otime + * @pt: list head of the tasks that must be woken up. + * + * do_smart_update() does the required called to update_queue, based on the + * actual changes that were performed on the semaphore array. + * Note that the function does not do the actual wake-up: the caller is + * responsible for calling wake_up_sem_queue_do(@pt). + * It is safe to perform this call after dropping all locks. + */ +static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops, + int otime, struct list_head *pt) +{ + int i; + + if (sma->complex_count || sops == NULL) { + if (update_queue(sma, -1, pt)) + otime = 1; + goto done; + } + + for (i = 0; i < nsops; i++) { + if (sops[i].sem_op > 0 || + (sops[i].sem_op < 0 && + sma->sem_base[sops[i].sem_num].semval == 0)) + if (update_queue(sma, sops[i].sem_num, pt)) + otime = 1; + } +done: + if (otime) + sma->sem_otime = get_seconds(); } + /* The following counts are associated to each semaphore: * semncnt number of tasks waiting on semval being nonzero * semzcnt number of tasks waiting on semval being zero @@ -572,6 +704,7 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp) struct sem_undo *un, *tu; struct sem_queue *q, *tq; struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm); + struct list_head tasks; /* Free the existing undo structures for this semaphore set. */ assert_spin_locked(&sma->sem_perm.lock); @@ -585,15 +718,17 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp) } /* Wake up all pending processes and let them fail with EIDRM. */ + INIT_LIST_HEAD(&tasks); list_for_each_entry_safe(q, tq, &sma->sem_pending, list) { unlink_queue(sma, q); - wake_up_sem_queue(q, -EIDRM); + wake_up_sem_queue_prepare(&tasks, q, -EIDRM); } /* Remove the semaphore set from the IDR */ sem_rmid(ns, sma); sem_unlock(sma); + wake_up_sem_queue_do(&tasks); ns->used_sems -= sma->sem_nsems; security_sem_free(sma); ipc_rcu_putref(sma); @@ -715,11 +850,13 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum, ushort fast_sem_io[SEMMSL_FAST]; ushort* sem_io = fast_sem_io; int nsems; + struct list_head tasks; sma = sem_lock_check(ns, semid); if (IS_ERR(sma)) return PTR_ERR(sma); + INIT_LIST_HEAD(&tasks); nsems = sma->sem_nsems; err = -EACCES; @@ -807,7 +944,7 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum, } sma->sem_ctime = get_seconds(); /* maybe some queued-up processes were waiting for this */ - update_queue(sma, -1); + do_smart_update(sma, NULL, 0, 0, &tasks); err = 0; goto out_unlock; } @@ -849,13 +986,15 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum, curr->sempid = task_tgid_vnr(current); sma->sem_ctime = get_seconds(); /* maybe some queued-up processes were waiting for this */ - update_queue(sma, semnum); + do_smart_update(sma, NULL, 0, 0, &tasks); err = 0; goto out_unlock; } } out_unlock: sem_unlock(sma); + wake_up_sem_queue_do(&tasks); + out_free: if(sem_io != fast_sem_io) ipc_free(sem_io, sizeof(ushort)*nsems); @@ -1069,7 +1208,7 @@ static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid) /* step 1: figure out the size of the semaphore array */ sma = sem_lock_check(ns, semid); if (IS_ERR(sma)) - return ERR_PTR(PTR_ERR(sma)); + return ERR_CAST(sma); nsems = sma->sem_nsems; sem_getref_and_unlock(sma); @@ -1129,6 +1268,7 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, struct sem_queue queue; unsigned long jiffies_left = 0; struct ipc_namespace *ns; + struct list_head tasks; ns = current->nsproxy->ipc_ns; @@ -1177,6 +1317,8 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, } else un = NULL; + INIT_LIST_HEAD(&tasks); + sma = sem_lock_check(ns, semid); if (IS_ERR(sma)) { if (un) @@ -1225,7 +1367,7 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, error = try_atomic_semop (sma, sops, nsops, un, task_tgid_vnr(current)); if (error <= 0) { if (alter && error == 0) - update_queue(sma, (nsops == 1) ? sops[0].sem_num : -1); + do_smart_update(sma, sops, nsops, 1, &tasks); goto out_unlock_free; } @@ -1302,6 +1444,8 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, out_unlock_free: sem_unlock(sma); + + wake_up_sem_queue_do(&tasks); out_free: if(sops != fast_sops) kfree(sops); @@ -1362,6 +1506,7 @@ void exit_sem(struct task_struct *tsk) for (;;) { struct sem_array *sma; struct sem_undo *un; + struct list_head tasks; int semid; int i; @@ -1425,10 +1570,11 @@ void exit_sem(struct task_struct *tsk) semaphore->sempid = task_tgid_vnr(current); } } - sma->sem_otime = get_seconds(); /* maybe some queued-up processes were waiting for this */ - update_queue(sma, -1); + INIT_LIST_HEAD(&tasks); + do_smart_update(sma, NULL, 0, 1, &tasks); sem_unlock(sma); + wake_up_sem_queue_do(&tasks); call_rcu(&un->rcu, free_un); }