X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fasm-x86%2Fbitops.h;h=ee4b3ead6a438d8d68c626803031072f60a19060;hb=4f962d4d65923d7b722192e729840cfb79af0a5a;hp=07e3f6d4fe47993b5bbfb833584ebd286498e949;hpb=c4ec20717313daafba59225f812db89595952b83;p=pandora-kernel.git diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h index 07e3f6d4fe47..ee4b3ead6a43 100644 --- a/include/asm-x86/bitops.h +++ b/include/asm-x86/bitops.h @@ -1,5 +1,435 @@ -#ifdef CONFIG_X86_32 -# include "bitops_32.h" +#ifndef _ASM_X86_BITOPS_H +#define _ASM_X86_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include + +/* + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1) +/* Technically wrong, but this avoids compilation errors on some gcc + versions. */ +#define ADDR "=m" (*(volatile long *) addr) +#else +#define ADDR "+m" (*(volatile long *) addr) +#endif + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * + * Note: there are no guarantees that this function will not be reordered + * on non x86 architectures, so if you are writing portable code, + * make sure not to rely on its reordering guarantees. + * + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(int nr, volatile void *addr) +{ + asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory"); +} + +/** + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static inline void __set_bit(int nr, volatile void *addr) +{ + asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory"); +} + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(int nr, volatile void *addr) +{ + asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr)); +} + +/* + * clear_bit_unlock - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and implies release semantics before the memory + * operation. It can be used for an unlock. + */ +static inline void clear_bit_unlock(unsigned nr, volatile void *addr) +{ + barrier(); + clear_bit(nr, addr); +} + +static inline void __clear_bit(int nr, volatile void *addr) +{ + asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); +} + +/* + * __clear_bit_unlock - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * __clear_bit() is non-atomic and implies release semantics before the memory + * operation. It can be used for an unlock if no other CPUs can concurrently + * modify other bits in the word. + * + * No memory barrier is required here, because x86 cannot reorder stores past + * older loads. Same principle as spin_unlock. + */ +static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) +{ + barrier(); + __clear_bit(nr, addr); +} + +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/** + * __change_bit - Toggle a bit in memory + * @nr: the bit to change + * @addr: the address to start counting from + * + * Unlike change_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static inline void __change_bit(int nr, volatile void *addr) +{ + asm volatile("btc %1,%0" : ADDR : "Ir" (nr)); +} + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(int nr, volatile void *addr) +{ + asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr)); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + int oldbit; + + asm volatile(LOCK_PREFIX "bts %2,%1\n\t" + "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory"); + + return oldbit; +} + +/** + * test_and_set_bit_lock - Set a bit and return its old value for lock + * @nr: Bit to set + * @addr: Address to count from + * + * This is the same as test_and_set_bit on x86. + */ +static inline int test_and_set_bit_lock(int nr, volatile void *addr) +{ + return test_and_set_bit(nr, addr); +} + +/** + * __test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static inline int __test_and_set_bit(int nr, volatile void *addr) +{ + int oldbit; + + asm("bts %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR + : "Ir" (nr)); + return oldbit; +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + int oldbit; + + asm volatile(LOCK_PREFIX "btr %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR : "Ir" (nr) : "memory"); + + return oldbit; +} + +/** + * __test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static inline int __test_and_clear_bit(int nr, volatile void *addr) +{ + int oldbit; + + asm volatile("btr %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR + : "Ir" (nr)); + return oldbit; +} + +/* WARNING: non atomic and it can be reordered! */ +static inline int __test_and_change_bit(int nr, volatile void *addr) +{ + int oldbit; + + asm volatile("btc %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR + : "Ir" (nr) : "memory"); + + return oldbit; +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + int oldbit; + + asm volatile(LOCK_PREFIX "btc %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR : "Ir" (nr) : "memory"); + + return oldbit; +} + +static inline int constant_test_bit(int nr, const volatile void *addr) +{ + return ((1UL << (nr % BITS_PER_LONG)) & + (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; +} + +static inline int variable_test_bit(int nr, volatile const void *addr) +{ + int oldbit; + + asm volatile("bt %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit) + : "m" (*(unsigned long *)addr), "Ir" (nr)); + + return oldbit; +} + +#if 0 /* Fool kernel-doc since it doesn't do macros yet */ +/** + * test_bit - Determine whether a bit is set + * @nr: bit number to test + * @addr: Address to start counting from + */ +static int test_bit(int nr, const volatile unsigned long *addr); +#endif + +#define test_bit(nr, addr) \ + (__builtin_constant_p((nr)) \ + ? constant_test_bit((nr), (addr)) \ + : variable_test_bit((nr), (addr))) + +/** + * __ffs - find first set bit in word + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + asm("bsf %1,%0" + : "=r" (word) + : "rm" (word)); + return word; +} + +/** + * ffz - find first zero bit in word + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +static inline unsigned long ffz(unsigned long word) +{ + asm("bsf %1,%0" + : "=r" (word) + : "r" (~word)); + return word; +} + +/* + * __fls: find last set bit in word + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +static inline unsigned long __fls(unsigned long word) +{ + asm("bsr %1,%0" + : "=r" (word) + : "rm" (word)); + return word; +} + +#ifdef __KERNEL__ +/** + * ffs - find first set bit in word + * @x: the word to search + * + * This is defined the same way as the libc and compiler builtin ffs + * routines, therefore differs in spirit from the other bitops. + * + * ffs(value) returns 0 if value is 0 or the position of the first + * set bit if value is nonzero. The first (least significant) bit + * is at position 1. + */ +static inline int ffs(int x) +{ + int r; +#ifdef CONFIG_X86_CMOV + asm("bsfl %1,%0\n\t" + "cmovzl %2,%0" + : "=r" (r) : "rm" (x), "r" (-1)); +#else + asm("bsfl %1,%0\n\t" + "jnz 1f\n\t" + "movl $-1,%0\n" + "1:" : "=r" (r) : "rm" (x)); +#endif + return r + 1; +} + +/** + * fls - find last set bit in word + * @x: the word to search + * + * This is defined in a similar way as the libc and compiler builtin + * ffs, but returns the position of the most significant set bit. + * + * fls(value) returns 0 if value is 0 or the position of the last + * set bit if value is nonzero. The last (most significant) bit is + * at position 32. + */ +static inline int fls(int x) +{ + int r; +#ifdef CONFIG_X86_CMOV + asm("bsrl %1,%0\n\t" + "cmovzl %2,%0" + : "=&r" (r) : "rm" (x), "rm" (-1)); #else -# include "bitops_64.h" + asm("bsrl %1,%0\n\t" + "jnz 1f\n\t" + "movl $-1,%0\n" + "1:" : "=r" (r) : "rm" (x)); #endif + return r + 1; +} +#endif /* __KERNEL__ */ + +#undef ADDR + +static inline void set_bit_string(unsigned long *bitmap, + unsigned long i, int len) +{ + unsigned long end = i + len; + while (i < end) { + __set_bit(i, bitmap); + i++; + } +} + +#ifdef __KERNEL__ + +#include + +#define ARCH_HAS_FAST_MULTIPLIER 1 + +#include + +#endif /* __KERNEL__ */ + +#include + +#ifdef __KERNEL__ + +#include + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_bit((nr), (unsigned long *)(addr)) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_bit((nr), (unsigned long *)(addr)) + +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_X86_BITOPS_H */