X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fsata_sis.c;h=a63f93186e41ad1eafdda84aa704619750373d44;hb=05d1fa4bf6a1528e4d4e39fa537f11e6cfca4720;hp=e418b89c6b9d8cf67c57a1b03431b91a19b585f2;hpb=8b0ee07e108b2eefdab5bb73f33223f18926c3b2;p=pandora-kernel.git diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index e418b89c6b9d..a63f93186e41 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -7,21 +7,26 @@ * * Copyright 2004 Uwe Koziolek * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. * */ @@ -47,7 +52,10 @@ enum { /* PCI configuration registers */ SIS_GENCTL = 0x54, /* IDE General Control register */ SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ - SIS_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ + SIS_PMR = 0x90, /* port mapping register */ + SIS_PMR_COMBINED = 0x30, /* random bits */ SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ @@ -62,6 +70,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static struct pci_device_id sis_pci_tbl[] = { { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, { } /* terminate list */ }; @@ -134,67 +143,95 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_VERSION(DRV_VERSION); -static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg) +static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) { unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); - if (port_no) - addr += SIS_SATA1_OFS; + if (port_no) { + if (device == 0x182) + addr += SIS182_SATA1_OFS; + else + addr += SIS180_SATA1_OFS; + } + return addr; } static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg); - u32 val; + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); + u32 val, val2; + u8 pmr; if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ return 0xffffffff; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + pci_read_config_dword(pdev, cfg_addr, &val); - return val; + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_read_config_dword(pdev, cfg_addr+0x10, &val2); + + return val|val2; } static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); + u8 pmr; if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + pci_write_config_dword(pdev, cfg_addr, val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_write_config_dword(pdev, cfg_addr+0x10, val); } static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) { + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u32 val, val2 = 0; + u8 pmr; + if (sc_reg > SCR_CONTROL) return 0xffffffffU; if (ap->flags & SIS_FLAG_CFGSCR) return sis_scr_cfg_read(ap, sc_reg); - return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); + + return val | val2; } static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 pmr; + if (sc_reg > SCR_CONTROL) return; + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ap->flags & SIS_FLAG_CFGSCR) sis_scr_cfg_write(ap, sc_reg, val); - else + else { outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -/* move to PCI layer, integrate w/ MSI stuff */ -static void pci_enable_intx(struct pci_dev *pdev) -{ - u16 pci_command; - - pci_read_config_word(pdev, PCI_COMMAND, &pci_command); - if (pci_command & PCI_COMMAND_INTX_DISABLE) { - pci_command &= ~PCI_COMMAND_INTX_DISABLE; - pci_write_config_word(pdev, PCI_COMMAND, pci_command); + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); } } @@ -205,6 +242,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u32 genctl; struct ata_port_info *ppi; int pci_dev_busy = 0; + u8 pmr; + u8 port2_start; rc = pci_enable_device(pdev); if (rc) @@ -234,7 +273,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_dword(pdev, SIS_GENCTL, &genctl); if ((genctl & GENCTL_IOMAPPED_SCR) == 0) probe_ent->host_flags |= SIS_FLAG_CFGSCR; - + /* if hardware thinks SCRs are in IO space, but there are * no IO resources assigned, change to PCI cfg space. */ @@ -246,15 +285,31 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->host_flags |= SIS_FLAG_CFGSCR; } + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ent->device != 0x182) { + if ((pmr & SIS_PMR_COMBINED) == 0) { + printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n"); + port2_start=0x64; + } + else { + printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n"); + port2_start=0; + } + } + else { + printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n"); + port2_start = 0x20; + } + if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { probe_ent->port[0].scr_addr = pci_resource_start(pdev, SIS_SCR_PCI_BAR); probe_ent->port[1].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR) + 64; + pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; } pci_set_master(pdev); - pci_enable_intx(pdev); + pci_intx(pdev, 1); /* FIXME: check ata_device_add return value */ ata_device_add(probe_ent);