X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fnetwave_cs.c;h=45b00e13ab2b3e670584b9dd26a77a307bd32e3c;hb=4aabab2181f20560948c2045ce1faaa9ac1507a8;hp=36b5e004305ee4455000ad832222d4246ca467ff;hpb=6fa0cb1141da80eed4f86155fb51931bc1c31888;p=pandora-kernel.git

diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 36b5e004305e..45b00e13ab2b 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -207,7 +207,7 @@ static int netwave_start_xmit( struct sk_buff *skb, struct net_device *dev);
 static int netwave_rx( struct net_device *dev);
 
 /* Interrupt routines */
-static irqreturn_t netwave_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t netwave_interrupt(int irq, void *dev_id);
 static void netwave_watchdog(struct net_device *);
 
 /* Statistics */
@@ -406,7 +406,6 @@ static int netwave_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
 
     /* Netwave private struct init. link/dev/node already taken care of,
      * other stuff zero'd - Jean II */
@@ -735,31 +734,13 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int netwave_pcmcia_config(struct pcmcia_device *link) {
     struct net_device *dev = link->priv;
     netwave_private *priv = netdev_priv(dev);
-    tuple_t tuple;
-    cisparse_t parse;
     int i, j, last_ret, last_fn;
-    u_char buf[64];
     win_req_t req;
     memreq_t mem;
     u_char __iomem *ramBase = NULL;
 
     DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
 
-    /*
-      This reads the card's CONFIG tuple to find its configuration
-      registers.
-    */
-    tuple.Attributes = 0;
-    tuple.TupleData = (cisdata_t *) buf;
-    tuple.TupleDataMax = 64;
-    tuple.TupleOffset = 0;
-    tuple.DesiredTuple = CISTPL_CONFIG;
-    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-    CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
-    link->conf.ConfigBase = parse.config.base;
-    link->conf.Present = parse.config.rmask[0];
-
     /*
      *  Try allocating IO ports.  This tries a few fixed addresses.
      *  If you want, you can also read the card's config table to
@@ -1072,7 +1053,7 @@ static int netwave_start_xmit(struct sk_buff *skb, struct net_device *dev) {
 } /* netwave_start_xmit */
 
 /*
- * Function netwave_interrupt (irq, dev_id, regs)
+ * Function netwave_interrupt (irq, dev_id)
  *
  *    This function is the interrupt handler for the Netwave card. This
  *    routine will be called whenever: 
@@ -1081,7 +1062,7 @@ static int netwave_start_xmit(struct sk_buff *skb, struct net_device *dev) {
  *	     ready to transmit another packet.
  *	  3. A command has completed execution.
  */
-static irqreturn_t netwave_interrupt(int irq, void* dev_id, struct pt_regs *regs)
+static irqreturn_t netwave_interrupt(int irq, void* dev_id)
 {
     kio_addr_t iobase;
     u_char __iomem *ramBase;
@@ -1302,7 +1283,6 @@ static int netwave_rx(struct net_device *dev)
 
 	skb_reserve( skb, 2);  /* Align IP on 16 byte */
 	skb_put( skb, rcvLen);
-	skb->dev = dev;
 
 	/* Copy packet fragments to the skb data area */
 	ptr = (u_char*) skb->data;